friendica-addons/dav/SabreDAV/docs/draft-nottingham-http-new-status-04.txt

Network Working Group                                      M. Nottingham
Internet-Draft                                                 Rackspace
Updates: 2616 (if approved)                                  R. Fielding
Intended status: Standards Track                                   Adobe
Expires: August 7, 2012                                 February 4, 2012


                      Additional HTTP Status Codes
                  draft-nottingham-http-new-status-04

Abstract

   This document specifies additional HyperText Transfer Protocol (HTTP)
   status codes for a variety of common situations.

Editorial Note (To be removed by RFC Editor before publication)

   Distribution of this document is unlimited.  Although this is not a
   work item of the HTTPbis Working Group, comments should be sent to
   the Hypertext Transfer Protocol (HTTP) mailing list at
   ietf-http-wg@w3.org [1], which may be joined by sending a message
   with subject "subscribe" to ietf-http-wg-request@w3.org [2].

   Discussions of the HTTPbis Working Group are archived at
   <http://lists.w3.org/Archives/Public/ietf-http-wg/>.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on August 7, 2012.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.




Nottingham & Fielding    Expires August 7, 2012                 [Page 1]

Internet-Draft        Additional HTTP Status Codes         February 2012


   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   3.  428 Precondition Required . . . . . . . . . . . . . . . . . . . 3
   4.  429 Too Many Requests . . . . . . . . . . . . . . . . . . . . . 4
   5.  431 Request Header Fields Too Large . . . . . . . . . . . . . . 4
   6.  511 Network Authentication Required . . . . . . . . . . . . . . 5
   7.  Security Considerations . . . . . . . . . . . . . . . . . . . . 6
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 7
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . . . 8
     9.1.  Normative References  . . . . . . . . . . . . . . . . . . . 8
     9.2.  Informative References  . . . . . . . . . . . . . . . . . . 8
   Appendix A.  Acknowledgements . . . . . . . . . . . . . . . . . . . 8
   Appendix B.  Issues Raised by Captive Portals . . . . . . . . . . . 8
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . . . 9
























Nottingham & Fielding    Expires August 7, 2012                 [Page 2]

Internet-Draft        Additional HTTP Status Codes         February 2012


1.  Introduction

   This document specifies additional HTTP [RFC2616] status codes for a
   variety of common situations, to improve interoperability and avoid
   confusion when other, less precise status codes are used.

   Note that these status codes are optional; servers cannot be required
   to support them.  However, because clients will treat unknown status
   codes as a generic error of the same class (e.g., 499 is treated as
   400 if it is not recognized), they can be safely deployed by existing
   servers (see [RFC2616] Section 6.1.1 for more information).


2.  Requirements

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].


3.  428 Precondition Required

   The 428 status code indicates that the origin server requires the
   request to be conditional.

   Its typical use is to avoid the "lost update" problem, where a client
   GETs a resource's state, modifies it, and PUTs it back to the server,
   when meanwhile a third party has modified the state on the server,
   leading to a conflict.  By requiring requests to be conditional, the
   server can assure that clients are working with the correct copies.

   Responses using this status code SHOULD explain how to resubmit the
   request successfully.  For example:

   HTTP/1.1 428 Precondition Required
   Content-Type: text/html

   <html>
    <head>
     <title>Precondition Required</title>
    </head>
    <body>
     <h1>Precondition Required</h1>
      <p>This request is required to be conditional;
         try using "If-Match".</p>
    </body>
   </html>




Nottingham & Fielding    Expires August 7, 2012                 [Page 3]

Internet-Draft        Additional HTTP Status Codes         February 2012


   Responses with the 428 status code MUST NOT be stored by a cache.


4.  429 Too Many Requests

   The 429 status code indicates that the user has sent too many
   requests in a given amount of time ("rate limiting").

   The response representations SHOULD include details explaining the
   condition, and MAY include a Retry-After header indicating how long
   to wait before making a new request.

   For example:

   HTTP/1.1 429 Too Many Requests
   Content-Type: text/html
   Retry-After: 3600

   <html>
      <head>
         <title>Too Many Requests</title>
      </head>
      <body>
         <h1>Too Many Requests</h1>
         <p>I only allow 50 requests per hour to this Web site per
            logged in user. Try again soon.</p>
      </body>
   </html>

   Note that this specification does not define how the origin server
   identifies the user, nor how it counts requests.  For example, an
   origin server that is limiting request rates can do so based upon
   counts of requests on a per-resource basis, across the entire server,
   or even among a set of servers.  Likewise, it might identify the user
   by its authentication credentials, or a stateful cookie.

   Responses with the 429 status code MUST NOT be stored by a cache.


5.  431 Request Header Fields Too Large

   The 431 status code indicates that the server is unwilling to process
   the request because its header fields are too large.  The request MAY
   be resubmitted after reducing the size of the request header fields.

   It can be used both when the set of request header fields in total
   are too large, and when a single header field is at fault.  In the
   latter case, the response representation SHOULD specify which header



Nottingham & Fielding    Expires August 7, 2012                 [Page 4]

Internet-Draft        Additional HTTP Status Codes         February 2012


   field was too large.

   For example:

   HTTP/1.1 431 Request Header Fields Too Large
   Content-Type: text/html

   <html>
      <head>
         <title>Request Header Fields Too Large</title>
      </head>
      <body>
         <h1>Request Header Fields Too Large</h1>
         <p>The "Example" header was too large.</p>
      </body>
   </html>

   Responses with the 431 status code MUST NOT be stored by a cache.


6.  511 Network Authentication Required

   The 511 status code indicates that the client needs to authenticate
   to gain network access.

   The response representation SHOULD contain a link to a resource that
   allows the user to submit credentials (e.g. with a HTML form).

   Note that the 511 response SHOULD NOT contain a challenge or the
   login interface itself, because browsers would show the login
   interface as being associated with the originally requested URL,
   which may cause confusion.

   The 511 status SHOULD NOT be generated by origin servers; it is
   intended for use by intercepting proxies that are interposed as a
   means of controlling access to the network.

   Responses with the 511 status code MUST NOT be stored by a cache.

6.1.  The 511 Status Code and Captive Portals

   The 511 status code is designed to mitigate problems caused by
   "captive portals" to software (especially non-browser agents) that is
   expecting a response from the server that a request was made to, not
   the intervening network infrastructure.  It is not intended to
   encouraged deployment of captive portals, only to limit the damage
   caused by them.




Nottingham & Fielding    Expires August 7, 2012                 [Page 5]

Internet-Draft        Additional HTTP Status Codes         February 2012


   A network operator wishing to require some authentication, acceptance
   of terms or other user interaction before granting access usually
   does so by identifing clients who have not done so ("unknown
   clients") using their MAC addresses.

   Unknown clients then have all traffic blocked, except for that on TCP
   port 80, which is sent to a HTTP server (the "login server")
   dedicated to "logging in" unknown clients, and of course traffic to
   the login server itself.

   For example, a user agent might connect to a network and make the
   following HTTP request on TCP port 80:

   GET /index.htm HTTP/1.1
   Host: www.example.com

   Upon receiving such a request, the login server would generate a 511
   response:

   HTTP/1.1 511 Network Authentication Required
   Content-Type: text/html

   <html>
      <head>
         <title>Network Authentication Required</title>
         <meta http-equiv="refresh"
               content="0; url=https://login.example.net/">
      </head>
      <body>
         <p>You need to <a href="https://login.example.net/">
         authenticate with the local network</a> in order to gain
         access.</p>
      </body>
   </html>

   Here, the 511 status code assures that non-browser clients will not
   interpret the response as being from the origin server, and the META
   HTML element redirects the user agent to the login server.


7.  Security Considerations

7.1.  428 Precondition Required

   The 428 status code is optional; clients cannot rely upon its use to
   prevent "lost update" conflicts.





Nottingham & Fielding    Expires August 7, 2012                 [Page 6]

Internet-Draft        Additional HTTP Status Codes         February 2012


7.2.  429 Too Many Requests

   When a server is under attack or just receiving a very large number
   of requests from a single party, responding to each with a 429 status
   code will consume resources.

   Therefore, servers are not required to use the 429 status code; when
   limiting resource usage, it may be more appropriate to just drop
   connections, or take other steps.

7.3.  431 Request Header Fields Too Large

   Servers are not required to use the 431 status code; when under
   attack, it may be more appropriate to just drop connections, or take
   other steps.

7.4.  511 Network Authentication Required

   In common use, a response carrying the 511 status code will not come
   from the origin server indicated in the request's URL.  This presents
   many security issues; e.g., an attacking intermediary may be
   inserting cookies into the original domain's name space, may be
   observing cookies or HTTP authentication credentials sent from the
   user agent, and so on.

   However, these risks are not unique to the 511 status code; in other
   words, a captive portal that is not using this status code introduces
   the same issues.

   Also, note that captive portals using this status code on an SSL or
   TLS connection (commonly, port 443) will generate a certificate error
   on the client.


8.  IANA Considerations

   The HTTP Status Codes Registry should be updated with the following
   entries:

   o  Code: 428
   o  Description: Precondition Required
   o  Specification: [ this document ]

   o  Code: 429
   o  Description: Too Many Requests
   o  Specification: [ this document ]





Nottingham & Fielding    Expires August 7, 2012                 [Page 7]

Internet-Draft        Additional HTTP Status Codes         February 2012


   o  Code: 431
   o  Description: Request Header Fields Too Large
   o  Specification: [ this document ]

   o  Code: 511
   o  Description: Network Authentication Required
   o  Specification: [ this document ]


9.  References

9.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

9.2.  Informative References

   [RFC4791]  Daboo, C., Desruisseaux, B., and L. Dusseault,
              "Calendaring Extensions to WebDAV (CalDAV)", RFC 4791,
              March 2007.

   [RFC4918]  Dusseault, L., "HTTP Extensions for Web Distributed
              Authoring and Versioning (WebDAV)", RFC 4918, June 2007.

URIs

   [1]  <mailto:ietf-http-wg@w3.org>

   [2]  <mailto:ietf-http-wg-request@w3.org?subject=subscribe>


Appendix A.  Acknowledgements

   Thanks to Jan Algermissen and Julian Reschke for their suggestions
   and feedback.


Appendix B.  Issues Raised by Captive Portals

   Since clients cannot differentiate between a portal's response and
   that of the HTTP server that they intended to communicate with, a
   number of issues arise.  The 511 status code is intended to help
   mitigate some of them.



Nottingham & Fielding    Expires August 7, 2012                 [Page 8]

Internet-Draft        Additional HTTP Status Codes         February 2012


   One example is the "favicon.ico"
   <http://en.wikipedia.org/wiki/Favicon> commonly used by browsers to
   identify the site being accessed.  If the favicon for a given site is
   fetched from a captive portal instead of the intended site (e.g.,
   because the user is unauthenticated), it will often "stick" in the
   browser's cache (most implementations cache favicons aggressively)
   beyond the portal session, so that it seems as if the portal's
   favicon has "taken over" the legitimate site.

   Another browser-based issue comes about when P3P
   <http://www.w3.org/TR/P3P/> is supported.  Depending on how it is
   implemented, it's possible a browser might interpret a portal's
   response for the p3p.xml file as the server's, resulting in the
   privacy policy (or lack thereof) advertised by the portal being
   interpreted as applying to the intended site.  Other Web-based
   protocols such as WebFinger
   <http://code.google.com/p/webfinger/wiki/WebFingerProtocol>, CORS
   <http://www.w3.org/TR/cors/> and OAuth
   <http://tools.ietf.org/html/draft-ietf-oauth-v2> may also be
   vulnerable to such issues.

   Although HTTP is most widely used with Web browsers, a growing number
   of non-browsing applications use it as a substrate protocol.  For
   example, WebDAV [RFC4918] and CalDAV [RFC4791] both use HTTP as the
   basis (for remote authoring and calendaring, respectively).  Using
   these applications from behind a captive portal can result in
   spurious errors being presented to the user, and might result in
   content corruption, in extreme cases.

   Similarly, other non-browser applications using HTTP can be affected
   as well; e.g., widgets <http://www.w3.org/TR/widgets/>, software
   updates, and other specialised software such as Twitter clients and
   the iTunes Music Store.

   It should be noted that it's sometimes believed that using HTTP
   redirection to direct traffic to the portal addresses these issues.
   However, since many of these uses "follow" redirects, this is not a
   good solution.


Authors' Addresses

   Mark Nottingham
   Rackspace

   Email: mnot@mnot.net
   URI:   http://www.mnot.net/




Nottingham & Fielding    Expires August 7, 2012                 [Page 9]

Internet-Draft        Additional HTTP Status Codes         February 2012


   Roy T. Fielding
   Adobe Systems Incorporated
   345 Park Ave
   San Jose, CA  95110
   USA

   Email: fielding@gbiv.com
   URI:   http://roy.gbiv.com/











































Nottingham & Fielding    Expires August 7, 2012                [Page 10]