Merge pull request #441 from pi-hole/development

Pihole v2.6.1.2. Closes #439

advanced/Scripts/blacklist.sh

@@ -11,16 +11,7 @@
 # (at your option) any later version.
 
 if [[ $# = 0 ]]; then
-    echo "::: Immediately blacklists one or more domains in the hosts file"
+	helpFunc
-    echo ":::"
-    echo "::: Usage: sudo pihole.sh -b domain1 [domain2 ...]"
-    echo ":::"
-    echo "::: Options:"
-    echo ":::  -d, --delmode		Remove domains from the blacklist"
-    echo ":::  -nr, --noreload		Update blacklist without refreshing dnsmasq"
-    echo ":::  -f, --force			Force updating of the hosts files, even if there are no changes"
-    echo ":::  -q, --quiet			output is less verbose"
-    exit 1
 fi
 
 #globals
@@ -58,6 +49,21 @@ if [[ -f $piholeIPv6file ]];then
 fi
 
 
+function helpFunc()
+{
+	  echo "::: Immediately blacklists one or more domains in the hosts file"
+    echo ":::"
+    echo "::: Usage: sudo pihole.sh -b domain1 [domain2 ...]"
+    echo ":::"
+    echo "::: Options:"
+    echo ":::  -d, --delmode		Remove domains from the blacklist"
+    echo ":::  -nr, --noreload		Update blacklist without refreshing dnsmasq"
+    echo ":::  -f, --force			Force updating of the hosts files, even if there are no changes"
+    echo ":::  -q, --quiet			output is less verbose"
+    echo ":::  -h, --help			Show this help dialog"
+    exit 1
+}
+
 function HandleOther(){
   #check validity of domain
 	validDomain=$(echo "$1" | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
@@ -176,6 +182,7 @@ do
     "-d" | "--delmode"   ) addmode=false;;
     "-f" | "--force"     ) force=true;;
     "-q" | "--quiet"     ) versbose=false;;
+    "-h" | "--help"			 ) helpFunc;;
     *                    ) HandleOther "$var";;
   esac
 done

advanced/Scripts/whitelist.sh

@@ -11,16 +11,7 @@
 # (at your option) any later version.
 
 if [[ $# = 0 ]]; then
-    echo "::: Immediately whitelists one or more domains in the hosts file"
+	helpFunc
-    echo ":::"
-    echo "::: Usage: sudo pihole.sh -w domain1 [domain2 ...]"
-    echo ":::"
-    echo "::: Options:"
-    echo ":::  -d, --delmode		Remove domains from the whitelist"
-    echo ":::  -nr, --noreload		Update Whitelist without refreshing dnsmasq"
-    echo ":::  -f, --force			Force updating of the hosts files, even if there are no changes"
-    echo ":::  -q, --quiet			output is less verbose"
-    exit 1
 fi
 
 #globals
@@ -57,6 +48,21 @@ if [[ -f $piholeIPv6file ]];then
 fi
 
 
+function helpFunc()
+{
+	  echo "::: Immediately whitelists one or more domains in the hosts file"
+    echo ":::"
+    echo "::: Usage: sudo pihole.sh -w domain1 [domain2 ...]"
+    echo ":::"
+    echo "::: Options:"
+    echo ":::  -d, --delmode		Remove domains from the whitelist"
+    echo ":::  -nr, --noreload		Update Whitelist without refreshing dnsmasq"
+    echo ":::  -f, --force			Force updating of the hosts files, even if there are no changes"
+    echo ":::  -q, --quiet			output is less verbose"
+    echo ":::  -h, --help			Show this help dialog"
+    exit 1
+}
+
 function HandleOther(){
   #check validity of domain
 	validDomain=$(echo "$1" | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
@@ -189,6 +195,7 @@ do
     "-d" | "--delmode"   ) addmode=false;;
     "-f" | "--force"     ) force=true;;
     "-q" | "--quiet"     ) versbose=false;;
+    "-h" | "--help"			 ) helpFunc;;
     *                    ) HandleOther "$var";;
   esac
 done

automated install/basic-install.sh

@@ -110,7 +110,8 @@ welcomeDialogs() {
 
 	# Explain the need for a static address
 	whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
-	In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
+	
+In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
 }
 
 
@@ -174,7 +175,7 @@ cleanupIPv6() {
 
 use4andor6() {
 	# Let use select IPv4 and/or IPv6
-	cmd=(whiptail --separate-output --checklist "Select Protocols" $r $c 2)
+	cmd=(whiptail --separate-output --checklist "Select Protocols (press space to select)" $r $c 2)
 	options=(IPv4 "Block ads over IPv4" on
 	IPv6 "Block ads over IPv6" off)
 	choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty)
@@ -232,8 +233,8 @@ getStaticIPv4Settings() {
 					Gateway:       $IPv4gw" $r $c) then
 		# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
 		whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict.  But in most cases the router is smart enough to not do that.
-		If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
+If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
-		It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
+It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
 		# Nothing else to do since the variables are already set above
 	else
 		# Otherwise, we need to ask the user to input their desired settings.
@@ -695,12 +696,12 @@ displayFinalMessage() {
 	# Final completion message to user
 	whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Configure your devices to use the Pi-hole as their DNS server using:
 
-	$IPv4addr
+IPv4:	$IPv4addr
-	$piholeIPv6
+IPv6:	$piholeIPv6
 
-	If you set a new IP address, you should restart the Pi.
+If you set a new IP address, you should restart the Pi.
 
-	The install log is in /etc/pihole." $r $c
+The install log is in /etc/pihole." $r $c
 }
 
 ######## SCRIPT ############

pihole

@@ -11,10 +11,10 @@
 # (at your option) any later version.
 
 # Must be root to use this tool
-if [[ $EUID -eq 0 ]];then
+if [[ ! $EUID -eq 0 ]];then
-	echo "::: You are root."
+	#echo "::: You are root."
-else
+#else
-	echo "::: Sudo will be used for this tool."
+	#echo "::: Sudo will be used for this tool."
   # Check if it is actually installed
   # If it isn't, exit because the pihole cannot be invoked without privileges.
   if [[ $(dpkg-query -s sudo) ]];then
@@ -63,7 +63,8 @@ function setupLCDFunction {
 }
 
 function chronometerFunc {
-	$SUDO /opt/pihole/chronometer.sh
+	shift
+	$SUDO /opt/pihole/chronometer.sh "$@"
 	exit 1
 }
 
@@ -106,7 +107,7 @@ case "$1" in
 "-u" | "updateDashboard"	) updateDashboardFunc;;
 "-g" | "updateGravity"		) updateGravityFunc;;
 "-s" | "setupLCD"			) setupLCDFunction;;
-"-c" | "chronometer"		) chronometerFunc;;
+"-c" | "chronometer"		) chronometerFunc "$@";;
 "-h" | "help"				) helpFunc;;
 "uninstall"					) uninstallFunc;;
 *                    		) helpFunc;;