diff --git a/advanced/Scripts/webpage.sh b/advanced/Scripts/webpage.sh
index 4c321ec2..67cbe766 100755
--- a/advanced/Scripts/webpage.sh
+++ b/advanced/Scripts/webpage.sh
@@ -43,126 +43,23 @@ fi
 helpFunc() {
     echo "Usage: pihole -a [options]
 Example: pihole -a -p password
-Set options for the Admin Console
+Set options for the API/Web interface
 
 Options:
-  -p, password                    Set Admin Console password
-  -c, celsius                     Set Celsius as preferred temperature unit
-  -f, fahrenheit                  Set Fahrenheit as preferred temperature unit
-  -k, kelvin                      Set Kelvin as preferred temperature unit
-  -h, --help                      Show this help dialog
-  -i, interface                   Specify dnsmasq's interface listening behavior
-  -l, privacylevel                Set privacy level (0 = lowest, 3 = highest)
-  -t, teleporter                  Backup configuration as an archive
-  -t, teleporter myname.tar.gz    Backup configuration to archive with name myname.tar.gz as specified"
+  -p, password                    Set API/Web interface password
+  -h, --help                      Show this help dialog"
     exit 0
 }
 
-add_setting() {
-    addOrEditKeyValPair "${setupVars}" "${1}" "${2}"
-}
-
-delete_setting() {
-    removeKey "${setupVars}" "${1}"
-}
-
-change_setting() {
-    addOrEditKeyValPair "${setupVars}" "${1}" "${2}"
-}
-
-addFTLsetting() {
-    addOrEditKeyValPair "${FTLconf}" "${1}" "${2}"
-}
-
-deleteFTLsetting() {
-    removeKey "${FTLconf}" "${1}"
-}
-
-changeFTLsetting() {
-    pihole-FTL --config "${1}" "${2}"
-}
-
-add_dnsmasq_setting() {
-    addOrEditKeyValPair "${dnsmasqconfig}" "${1}" "${2}"
-}
-
-delete_dnsmasq_setting() {
-    removeKey "${dnsmasqconfig}" "${1}"
-}
-
-SetTemperatureUnit() {
-    addOrEditKeyValPair "${setupVars}" "TEMPERATUREUNIT" "${unit}"
-    echo -e "  ${TICK} Set temperature unit to ${unit}"
-}
-
-HashPassword() {
-    # Compute password hash twice to avoid rainbow table vulnerability
-    return=$(echo -n "${1}" | sha256sum | sed 's/\s.*$//')
-    return=$(echo -n "${return}" | sha256sum | sed 's/\s.*$//')
-    echo "${return}"
-}
-
-# Check an IP address to see if it is a valid one
-valid_ip() {
-    # Local, named variables
-    local ip=${1}
-    local stat=1
-
-    # Regex matching one IPv4 component, i.e. an integer from 0 to 255.
-    # See https://tools.ietf.org/html/rfc1340
-    local ipv4elem="(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9][0-9]?|0)";
-    # Regex matching an optional port (starting with '#') range of 1-65536
-    local portelem="(#(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))?";
-    # Build a full IPv4 regex from the above subexpressions
-    local regex="^${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}${portelem}$"
-
-    # Evaluate the regex, and return the result
-    [[ $ip =~ ${regex} ]]
-
-    stat=$?
-    return "${stat}"
-}
-
-valid_ip6() {
-    local ip=${1}
-    local stat=1
-
-    # Regex matching one IPv6 element, i.e. a hex value from 0000 to FFFF
-    local ipv6elem="[0-9a-fA-F]{1,4}"
-    # Regex matching an IPv6 CIDR, i.e. 1 to 128
-    local v6cidr="(\\/([1-9]|[1-9][0-9]|1[0-1][0-9]|12[0-8])){0,1}"
-    # Regex matching an optional port (starting with '#') range of 1-65536
-    local portelem="(#(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))?";
-    # Build a full IPv6 regex from the above subexpressions
-    local regex="^(((${ipv6elem}))*((:${ipv6elem}))*::((${ipv6elem}))*((:${ipv6elem}))*|((${ipv6elem}))((:${ipv6elem})){7})${v6cidr}${portelem}$"
-
-    # Evaluate the regex, and return the result
-    [[ ${ip} =~ ${regex} ]]
-
-    stat=$?
-    return "${stat}"
-}
-
+# TODO: We can probably remove the reliance on this function too, just tell people to pihole-FTL --config webserver.api.password "password"
 SetWebPassword() {
-    if [ "${SUDO_USER}" == "www-data" ]; then
-        echo "Security measure: user www-data is not allowed to change webUI password!"
-        echo "Exiting"
-        exit 1
-    fi
-
-    if [ "${SUDO_USER}" == "lighttpd" ]; then
-        echo "Security measure: user lighttpd is not allowed to change webUI password!"
-        echo "Exiting"
-        exit 1
-    fi
-
     if (( ${#args[2]} > 0 )) ; then
         readonly PASSWORD="${args[2]}"
         readonly CONFIRM="${PASSWORD}"
     else
         # Prevents a bug if the user presses Ctrl+C and it continues to hide the text typed.
         # So we reset the terminal via stty if the user does press Ctrl+C
-        trap '{ echo -e "\nNo password will be set" ; stty sane ; exit 1; }' INT
+        trap '{ echo -e "\nNot changed" ; stty sane ; exit 1; }' INT
         read -s -r -p "Enter New Password (Blank for no password): " PASSWORD
         echo ""
 
@@ -186,689 +83,12 @@ SetWebPassword() {
     fi
 }
 
-ProcessDNSSettings() {
-    source "${setupVars}"
-
-    removeKey "${dnsmasqconfig}" "server"
-
-    COUNTER=1
-    while true ; do
-        var=PIHOLE_DNS_${COUNTER}
-        if [ -z "${!var}" ]; then
-            break;
-        fi
-        addKey "${dnsmasqconfig}" "server=${!var}"
-        (( COUNTER++ ))
-    done
-
-    # The option LOCAL_DNS_PORT is deprecated
-    # We apply it once more, and then convert it into the current format
-    if [ -n "${LOCAL_DNS_PORT}" ]; then
-        addOrEditKeyValPair "${dnsmasqconfig}" "server" "127.0.0.1#${LOCAL_DNS_PORT}"
-        addOrEditKeyValPair "${setupVars}" "PIHOLE_DNS_${COUNTER}" "127.0.0.1#${LOCAL_DNS_PORT}"
-        removeKey "${setupVars}" "LOCAL_DNS_PORT"
-    fi
-
-    removeKey "${dnsmasqconfig}" "domain-needed"
-    removeKey "${dnsmasqconfig}" "expand-hosts"
-
-    if [[ "${DNS_FQDN_REQUIRED}" == true ]]; then
-        addKey "${dnsmasqconfig}" "domain-needed"
-        addKey "${dnsmasqconfig}" "expand-hosts"
-    fi
-
-    removeKey "${dnsmasqconfig}" "bogus-priv"
-
-    if [[ "${DNS_BOGUS_PRIV}" == true ]]; then
-        addKey "${dnsmasqconfig}" "bogus-priv"
-    fi
-
-    removeKey "${dnsmasqconfig}" "dnssec"
-    removeKey "${dnsmasqconfig}" "trust-anchor"
-
-    if [[ "${DNSSEC}" == true ]]; then
-        echo "dnssec
-trust-anchor=.,20326,8,2,E06D44B80B8F1D39A95C0B0D7C65D08458E880409BBC683457104237C7F8EC8D
-" >> "${dnsmasqconfig}"
-    fi
-
-    removeKey "${dnsmasqconfig}" "host-record"
-
-    if [ -n "${HOSTRECORD}" ]; then
-        addOrEditKeyValPair "${dnsmasqconfig}" "host-record" "${HOSTRECORD}"
-    fi
-
-    # Setup interface listening behavior of dnsmasq
-    removeKey "${dnsmasqconfig}" "interface"
-    removeKey "${dnsmasqconfig}" "local-service"
-    removeKey "${dnsmasqconfig}" "except-interface"
-    removeKey "${dnsmasqconfig}" "bind-interfaces"
-
-    if [[ "${DNSMASQ_LISTENING}" == "all" ]]; then
-        # Listen on all interfaces, permit all origins
-        addOrEditKeyValPair "${dnsmasqconfig}" "except-interface" "nonexisting"
-    elif [[ "${DNSMASQ_LISTENING}" == "local" ]]; then
-        # Listen only on all interfaces, but only local subnets
-        addKey "${dnsmasqconfig}" "local-service"
-    else
-        # Options "bind" and "single"
-        # Listen only on one interface
-        # Use eth0 as fallback interface if interface is missing in setupVars.conf
-        if [ -z "${PIHOLE_INTERFACE}" ]; then
-            PIHOLE_INTERFACE="eth0"
-        fi
-
-        addOrEditKeyValPair "${dnsmasqconfig}" "interface" "${PIHOLE_INTERFACE}"
-
-        if [[ "${DNSMASQ_LISTENING}" == "bind" ]]; then
-            # Really bind to interface
-            addKey "${dnsmasqconfig}" "bind-interfaces"
-        fi
-    fi
-
-    if [[ "${CONDITIONAL_FORWARDING}" == true ]]; then
-        # Convert legacy "conditional forwarding" to rev-server configuration
-        # Remove any existing REV_SERVER settings
-        removeKey "${setupVars}" "REV_SERVER"
-        removeKey "${setupVars}" "REV_SERVER_DOMAIN"
-        removeKey "${setupVars}" "REV_SERVER_TARGET"
-        removeKey "${setupVars}" "REV_SERVER_CIDR"
-
-        REV_SERVER=true
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER" "true"
-
-        REV_SERVER_DOMAIN="${CONDITIONAL_FORWARDING_DOMAIN}"
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER_DOMAIN" "${REV_SERVER_DOMAIN}"
-
-        REV_SERVER_TARGET="${CONDITIONAL_FORWARDING_IP}"
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER_TARGET" "${REV_SERVER_TARGET}"
-
-        #Convert CONDITIONAL_FORWARDING_REVERSE if necessary e.g:
-        #          1.1.168.192.in-addr.arpa to 192.168.1.1/32
-        #          1.168.192.in-addr.arpa to 192.168.1.0/24
-        #          168.192.in-addr.arpa to 192.168.0.0/16
-        #          192.in-addr.arpa to 192.0.0.0/8
-        if [[ "${CONDITIONAL_FORWARDING_REVERSE}" == *"in-addr.arpa" ]];then
-            arrRev=("${CONDITIONAL_FORWARDING_REVERSE//./ }")
-            case ${#arrRev[@]} in
-                6   )   REV_SERVER_CIDR="${arrRev[3]}.${arrRev[2]}.${arrRev[1]}.${arrRev[0]}/32";;
-                5   )   REV_SERVER_CIDR="${arrRev[2]}.${arrRev[1]}.${arrRev[0]}.0/24";;
-                4   )   REV_SERVER_CIDR="${arrRev[1]}.${arrRev[0]}.0.0/16";;
-                3   )   REV_SERVER_CIDR="${arrRev[0]}.0.0.0/8";;
-            esac
-        else
-            # Set REV_SERVER_CIDR to whatever value it was set to
-            REV_SERVER_CIDR="${CONDITIONAL_FORWARDING_REVERSE}"
-        fi
-
-        # If REV_SERVER_CIDR is not converted by the above, then use the REV_SERVER_TARGET variable to derive it
-        if [ -z "${REV_SERVER_CIDR}" ]; then
-            # Convert existing input to /24 subnet (preserves legacy behavior)
-            # This sed converts "192.168.1.2" to "192.168.1.0/24"
-            # shellcheck disable=2001
-            REV_SERVER_CIDR="$(sed "s+\\.[0-9]*$+\\.0/24+" <<< "${REV_SERVER_TARGET}")"
-        fi
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER_CIDR" "${REV_SERVER_CIDR}"
-
-        # Remove obsolete settings from setupVars.conf
-        removeKey "${setupVars}" "CONDITIONAL_FORWARDING"
-        removeKey "${setupVars}" "CONDITIONAL_FORWARDING_REVERSE"
-        removeKey "${setupVars}" "CONDITIONAL_FORWARDING_DOMAIN"
-        removeKey "${setupVars}" "CONDITIONAL_FORWARDING_IP"
-    fi
-
-    removeKey "${dnsmasqconfig}" "rev-server"
-
-    if [[ "${REV_SERVER}" == true ]]; then
-        addKey "${dnsmasqconfig}" "rev-server=${REV_SERVER_CIDR},${REV_SERVER_TARGET}"
-        if [ -n "${REV_SERVER_DOMAIN}" ]; then
-            # Forward local domain names to the CF target, too
-            addKey "${dnsmasqconfig}" "server=/${REV_SERVER_DOMAIN}/${REV_SERVER_TARGET}"
-        fi
-
-        if [[ "${DNS_FQDN_REQUIRED}" != true ]]; then
-            # Forward unqualified names to the CF target only when the "never
-            # forward non-FQDN" option is unticked
-            addKey "${dnsmasqconfig}" "server=//${REV_SERVER_TARGET}"
-        fi
-
-    fi
-
-    # We need to process DHCP settings here as well to account for possible
-    # changes in the non-FQDN forwarding. This cannot be done in 01-pihole.conf
-    # as we don't want to delete all local=/.../ lines so it's much safer to
-    # simply rewrite the entire corresponding config file (which is what the
-    # DHCP settings subroutine is doing)
-    ProcessDHCPSettings
-}
-
-SetDNSServers() {
-    # Save setting to file
-    removeKey "${setupVars}" "PIHOLE_DNS"
-    IFS=',' read -r -a array <<< "${args[2]}"
-    for index in "${!array[@]}"
-    do
-        # Replace possible "\#" by "#". This fixes AdminLTE#1427
-        local ip
-        ip="${array[index]//\\#/#}"
-
-        if valid_ip "${ip}" || valid_ip6 "${ip}" ; then
-            addOrEditKeyValPair "${setupVars}" "PIHOLE_DNS_$((index+1))" "${ip}"
-        else
-            echo -e "  ${CROSS} Invalid IP has been passed"
-            exit 1
-        fi
-    done
-
-    if [[ "${args[3]}" == "domain-needed" ]]; then
-        addOrEditKeyValPair "${setupVars}" "DNS_FQDN_REQUIRED" "true"
-    else
-        addOrEditKeyValPair "${setupVars}" "DNS_FQDN_REQUIRED" "false"
-    fi
-
-    if [[ "${args[4]}" == "bogus-priv" ]]; then
-        addOrEditKeyValPair "${setupVars}" "DNS_BOGUS_PRIV" "true"
-    else
-        addOrEditKeyValPair "${setupVars}" "DNS_BOGUS_PRIV" "false"
-    fi
-
-    if [[ "${args[5]}" == "dnssec" ]]; then
-        addOrEditKeyValPair "${setupVars}" "DNSSEC" "true"
-    else
-        addOrEditKeyValPair "${setupVars}" "DNSSEC" "false"
-    fi
-
-    if [[ "${args[6]}" == "rev-server" ]]; then
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER" "true"
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER_CIDR" "${args[7]}"
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER_TARGET" "${args[8]}"
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER_DOMAIN" "${args[9]}"
-    else
-        addOrEditKeyValPair "${setupVars}" "REV_SERVER" "false"
-    fi
-
-    ProcessDNSSettings
-
-    # Restart dnsmasq to load new configuration
-    RestartDNS
-}
-
-SetExcludeDomains() {
-    addOrEditKeyValPair "${setupVars}" "API_EXCLUDE_DOMAINS" "${args[2]}"
-}
-
-SetExcludeClients() {
-    addOrEditKeyValPair "${setupVars}" "API_EXCLUDE_CLIENTS" "${args[2]}"
-}
-
-RestartDNS() {
-    "${PI_HOLE_BIN_DIR}"/pihole restartdns
-}
-
-SetQueryLogOptions() {
-    addOrEditKeyValPair "${setupVars}" "API_QUERY_LOG_SHOW" "${args[2]}"
-}
-
-ProcessDHCPSettings() {
-    source "${setupVars}"
-
-    if [[ "${DHCP_ACTIVE}" == "true" ]]; then
-        interface="${PIHOLE_INTERFACE}"
-
-        # Use eth0 as fallback interface
-        if [ -z ${interface} ]; then
-            interface="eth0"
-        fi
-
-        if [[ "${PIHOLE_DOMAIN}" == "" ]]; then
-            PIHOLE_DOMAIN="lan"
-            addOrEditKeyValPair "${setupVars}" "PIHOLE_DOMAIN" "${PIHOLE_DOMAIN}"
-        fi
-
-        if [[ "${DHCP_LEASETIME}" == "0" ]]; then
-            leasetime="infinite"
-        elif [[ "${DHCP_LEASETIME}" == "" ]]; then
-            leasetime="24h"
-            addOrEditKeyValPair "${setupVars}" "DHCP_LEASETIME" "24"
-        else
-            leasetime="${DHCP_LEASETIME}h"
-        fi
-
-        # Write settings to file
-        echo "###############################################################################
-#  DHCP SERVER CONFIG FILE AUTOMATICALLY POPULATED BY PI-HOLE WEB INTERFACE.  #
-#            ANY CHANGES MADE TO THIS FILE WILL BE LOST ON CHANGE             #
-###############################################################################
-dhcp-authoritative
-dhcp-range=${DHCP_START},${DHCP_END},${leasetime}
-dhcp-option=option:router,${DHCP_ROUTER}
-dhcp-leasefile=/etc/pihole/dhcp.leases
-#quiet-dhcp
-" > "${dhcpconfig}"
-        chmod 644 "${dhcpconfig}"
-
-        if [[ "${PIHOLE_DOMAIN}" != "none" ]]; then
-            echo "domain=${PIHOLE_DOMAIN}" >> "${dhcpconfig}"
-
-            # When there is a Pi-hole domain set and "Never forward non-FQDNs" is
-            # ticked, we add `local=/domain/` to tell FTL that this domain is purely
-            # local and FTL may answer queries from /etc/hosts or DHCP but should
-            # never forward queries on that domain to any upstream servers
-            if  [[ "${DNS_FQDN_REQUIRED}" == true ]]; then
-                echo "local=/${PIHOLE_DOMAIN}/" >> "${dhcpconfig}"
-            fi
-        fi
-
-        # Sourced from setupVars
-        # shellcheck disable=SC2154
-        if [[ "${DHCP_rapid_commit}" == "true" ]]; then
-            echo "dhcp-rapid-commit" >> "${dhcpconfig}"
-        fi
-
-        if [[ "${DHCP_IPv6}" == "true" ]]; then
-            echo "#quiet-dhcp6
-#enable-ra
-dhcp-option=option6:dns-server,[::]
-dhcp-range=::,constructor:${interface},ra-names,ra-stateless,64
-
-" >> "${dhcpconfig}"
-        fi
-
-    else
-        if [[ -f "${dhcpconfig}" ]]; then
-            rm "${dhcpconfig}" &> /dev/null
-        fi
-    fi
-}
-
-EnableDHCP() {
-    addOrEditKeyValPair "${setupVars}" "DHCP_ACTIVE" "true"
-    addOrEditKeyValPair "${setupVars}" "DHCP_START" "${args[2]}"
-    addOrEditKeyValPair "${setupVars}" "DHCP_END" "${args[3]}"
-    addOrEditKeyValPair "${setupVars}" "DHCP_ROUTER" "${args[4]}"
-    addOrEditKeyValPair "${setupVars}" "DHCP_LEASETIME" "${args[5]}"
-    addOrEditKeyValPair "${setupVars}" "PIHOLE_DOMAIN" "${args[6]}"
-    addOrEditKeyValPair "${setupVars}" "DHCP_IPv6" "${args[7]}"
-    addOrEditKeyValPair "${setupVars}" "DHCP_rapid_commit" "${args[8]}"
-
-    # Remove possible old setting from file
-    removeKey "${dnsmasqconfig}" "dhcp-"
-    removeKey "${dnsmasqconfig}" "quiet-dhcp"
-
-    # If a DHCP client claims that its name is "wpad", ignore that.
-    # This fixes a security hole. see CERT Vulnerability VU#598349
-    # We also ignore "localhost" as Windows behaves strangely if a
-    # device claims this host name
-    addKey "${dnsmasqconfig}" "dhcp-name-match=set:hostname-ignore,wpad
-dhcp-name-match=set:hostname-ignore,localhost
-dhcp-ignore-names=tag:hostname-ignore"
-
-    ProcessDHCPSettings
-
-    RestartDNS
-}
-
-DisableDHCP() {
-    addOrEditKeyValPair "${setupVars}" "DHCP_ACTIVE" "false"
-
-    # Remove possible old setting from file
-    removeKey "${dnsmasqconfig}" "dhcp-"
-    removeKey "${dnsmasqconfig}" "quiet-dhcp"
-
-    ProcessDHCPSettings
-
-    RestartDNS
-}
-
-SetWebUILayout() {
-    addOrEditKeyValPair "${setupVars}" "WEBUIBOXEDLAYOUT" "${args[2]}"
-}
-
-SetWebUITheme() {
-    addOrEditKeyValPair "${setupVars}" "WEBTHEME" "${args[2]}"
-}
-
-CheckUrl(){
-    local regex check_url
-    # Check for characters NOT allowed in URLs
-    regex="[^a-zA-Z0-9:/?&%=~._()-;]"
-
-    # this will remove first @ that is after schema and before domain
-    # \1 is optional schema, \2 is userinfo
-    check_url="$( sed -re 's#([^:/]*://)?([^/]+)@#\1\2#' <<< "$1" )"
-
-    if [[ "${check_url}" =~ ${regex} ]]; then
-        return 1
-    else
-        return 0
-    fi
-}
-
-CustomizeAdLists() {
-    local address
-    address="${args[3]}"
-    local comment
-    comment="${args[4]}"
-
-    if CheckUrl "${address}"; then
-        if [[ "${args[2]}" == "enable" ]]; then
-            pihole-FTL sqlite3 "${gravityDBfile}" "UPDATE adlist SET enabled = 1 WHERE address = '${address}'"
-        elif [[ "${args[2]}" == "disable" ]]; then
-            pihole-FTL sqlite3 "${gravityDBfile}" "UPDATE adlist SET enabled = 0 WHERE address = '${address}'"
-        elif [[ "${args[2]}" == "add" ]]; then
-            pihole-FTL sqlite3 "${gravityDBfile}" "INSERT OR IGNORE INTO adlist (address, comment) VALUES ('${address}', '${comment}')"
-        elif [[ "${args[2]}" == "del" ]]; then
-            pihole-FTL sqlite3 "${gravityDBfile}" "DELETE FROM adlist WHERE address = '${address}'"
-        else
-            echo "Not permitted"
-            return 1
-        fi
-    else
-        echo "Invalid Url"
-        return 1
-    fi
-}
-
-AddDHCPStaticAddress() {
-    mac="${args[2]}"
-    ip="${args[3]}"
-    host="${args[4]}"
-
-    if [[ "${ip}" == "noip" ]]; then
-        # Static host name
-        echo "dhcp-host=${mac},${host}" >> "${dhcpstaticconfig}"
-    elif [[ "${host}" == "nohost" ]]; then
-        # Static IP
-        echo "dhcp-host=${mac},${ip}" >> "${dhcpstaticconfig}"
-    else
-        # Full info given
-        echo "dhcp-host=${mac},${ip},${host}" >> "${dhcpstaticconfig}"
-    fi
-}
-
-RemoveDHCPStaticAddress() {
-    mac="${args[2]}"
-    if [[ "$mac" =~ ^([0-9A-Fa-f]{2}[:-]){5}([0-9A-Fa-f]{2})$ ]]; then
-        sed -i "/dhcp-host=${mac}.*/d" "${dhcpstaticconfig}"
-    else
-        echo "  ${CROSS} Invalid Mac Passed!"
-        exit 1
-    fi
-
-}
-
-SetListeningMode() {
-    source "${setupVars}"
-
-    if [[ "$3" == "-h" ]] || [[ "$3" == "--help" ]]; then
-        echo "Usage: pihole -a -i [interface]
-Example: 'pihole -a -i local'
-Specify dnsmasq's network interface listening behavior
-
-Interfaces:
-  local               Only respond to queries from devices that
-                      are at most one hop away (local devices)
-  single              Respond only on interface ${PIHOLE_INTERFACE}
-  bind                Bind only on interface ${PIHOLE_INTERFACE}
-  all                 Listen on all interfaces, permit all origins"
-        exit 0
-    fi
-
-    if [[ "${args[2]}" == "all" ]]; then
-        echo -e "  ${INFO} Listening on all interfaces, permitting all origins. Please use a firewall!"
-        addOrEditKeyValPair "${setupVars}" "DNSMASQ_LISTENING" "all"
-    elif [[ "${args[2]}" == "local" ]]; then
-        echo -e "  ${INFO} Listening on all interfaces, permitting origins from one hop away (LAN)"
-        addOrEditKeyValPair "${setupVars}" "DNSMASQ_LISTENING" "local"
-    elif [[ "${args[2]}" == "bind" ]]; then
-        echo -e "  ${INFO} Binding on interface ${PIHOLE_INTERFACE}"
-        addOrEditKeyValPair "${setupVars}" "DNSMASQ_LISTENING" "bind"
-    else
-        echo -e "  ${INFO} Listening only on interface ${PIHOLE_INTERFACE}"
-        addOrEditKeyValPair "${setupVars}" "DNSMASQ_LISTENING" "single"
-    fi
-
-    # Don't restart DNS server yet because other settings
-    # will be applied afterwards if "-web" is set
-    if [[ "${args[3]}" != "-web" ]]; then
-        ProcessDNSSettings
-        # Restart dnsmasq to load new configuration
-        RestartDNS
-    fi
-}
-
-Teleporter() {
-    local filename
-    filename="${args[2]}"
-    if [[ -z "${filename}" ]]; then
-        local datetimestamp
-        local host
-        datetimestamp=$(date "+%Y-%m-%d_%H-%M-%S")
-        host=$(hostname)
-        host="${host//./_}"
-        filename="pi-hole-${host:-noname}-teleporter_${datetimestamp}.tar.gz"
-    fi
-    php "${webroot}/admin/scripts/pi-hole/php/teleporter.php" > "${filename}"
-}
-
-checkDomain()
-{
-    local domain validDomain
-    # Convert to lowercase
-    domain="${1,,}"
-    validDomain=$(grep -P "^((-|_)*[a-z0-9]((-|_)*[a-z0-9)*(-|_)*)(\\.(-|_)*([a-z0-9]((-|_)*[a-z0-9])*))*$" <<< "${domain}") # Valid chars check
-    validDomain=$(grep -P "^[^\\.]{1,63}(\\.[^\\.]{1,63})*$" <<< "${validDomain}") # Length of each label
-    echo "${validDomain}"
-}
-
-escapeDots()
-{
-    # SC suggest bashism ${variable//search/replace}
-    # shellcheck disable=SC2001
-    escaped=$(echo "$1" | sed 's/\./\\./g')
-    echo "${escaped}"
-}
-
-addAudit()
-{
-    shift # skip "-a"
-    shift # skip "audit"
-    local domains validDomain
-    domains=""
-    for domain in "$@"
-    do
-        # Check domain to be added. Only continue if it is valid
-        validDomain="$(checkDomain "${domain}")"
-        if [[ -n "${validDomain}" ]]; then
-            # Put comma in between domains when there is
-            # more than one domains to be added
-            # SQL INSERT allows adding multiple rows at once using the format
-            ## INSERT INTO table (domain) VALUES ('abc.de'),('fgh.ij'),('klm.no'),('pqr.st');
-            if [[ -n "${domains}" ]]; then
-                domains="${domains},"
-            fi
-            domains="${domains}('${domain}')"
-        fi
-    done
-    # Insert only the domain here. The date_added field will be
-    # filled with its default value (date_added = current timestamp)
-    pihole-FTL sqlite3 "${gravityDBfile}" "INSERT INTO domain_audit (domain) VALUES ${domains};"
-}
-
-clearAudit()
-{
-    pihole-FTL sqlite3 "${gravityDBfile}" "DELETE FROM domain_audit;"
-}
-
-SetPrivacyLevel() {
-    # Set privacy level. Minimum is 0, maximum is 3
-    if [ "${args[2]}" -ge 0 ] && [ "${args[2]}" -le 3 ]; then
-        addOrEditKeyValPair "${FTLconf}" "PRIVACYLEVEL" "${args[2]}"
-        pihole restartdns reload-lists
-    fi
-}
-
-AddCustomDNSAddress() {
-    echo -e "  ${TICK} Adding custom DNS entry..."
-
-    ip="${args[2]}"
-    host="${args[3]}"
-    reload="${args[4]}"
-
-    validHost="$(checkDomain "${host}")"
-    if [[ -n "${validHost}" ]]; then
-        if valid_ip "${ip}" || valid_ip6 "${ip}" ; then
-            echo "${ip} ${validHost}" >> "${dnscustomfile}"
-        else
-            echo -e "  ${CROSS} Invalid IP has been passed"
-            exit 1
-        fi
-    else
-        echo "  ${CROSS} Invalid Domain passed!"
-        exit 1
-    fi
-
-    # Restart dnsmasq to load new custom DNS entries only if $reload not false
-    if [[ ! $reload == "false" ]]; then
-        RestartDNS
-    fi
-}
-
-RemoveCustomDNSAddress() {
-    echo -e "  ${TICK} Removing custom DNS entry..."
-
-    ip="${args[2]}"
-    host="${args[3]}"
-    reload="${args[4]}"
-
-    validHost="$(checkDomain "${host}")"
-    if [[ -n "${validHost}" ]]; then
-        if valid_ip "${ip}" || valid_ip6 "${ip}" ; then
-            validHost=$(escapeDots "${validHost}")
-            sed -i "/^${ip} ${validHost}$/Id" "${dnscustomfile}"
-        else
-            echo -e "  ${CROSS} Invalid IP has been passed"
-            exit 1
-        fi
-    else
-        echo "  ${CROSS} Invalid Domain passed!"
-        exit 1
-    fi
-
-    # Restart dnsmasq to load new custom DNS entries only if reload is not false
-    if [[ ! $reload == "false" ]]; then
-        RestartDNS
-    fi
-}
-
-AddCustomCNAMERecord() {
-    echo -e "  ${TICK} Adding custom CNAME record..."
-
-    domain="${args[2]}"
-    target="${args[3]}"
-    reload="${args[4]}"
-
-    validDomain="$(checkDomain "${domain}")"
-    if [[ -n "${validDomain}" ]]; then
-        validTarget="$(checkDomain "${target}")"
-        if [[ -n "${validTarget}" ]]; then
-            if [ "${validDomain}" = "${validTarget}" ]; then
-                echo "  ${CROSS} Domain and target are the same. This would cause a DNS loop."
-                exit 1
-            else
-                echo "cname=${validDomain},${validTarget}" >> "${dnscustomcnamefile}"
-            fi
-        else
-            echo "  ${CROSS} Invalid Target Passed!"
-            exit 1
-        fi
-    else
-        echo "  ${CROSS} Invalid Domain passed!"
-        exit 1
-    fi
-    # Restart dnsmasq to load new custom CNAME records only if reload is not false
-    if [[ ! $reload == "false" ]]; then
-        RestartDNS
-    fi
-}
-
-RemoveCustomCNAMERecord() {
-    echo -e "  ${TICK} Removing custom CNAME record..."
-
-    domain="${args[2]}"
-    target="${args[3]}"
-    reload="${args[4]}"
-
-    validDomain="$(checkDomain "${domain}")"
-    if [[ -n "${validDomain}" ]]; then
-        validTarget="$(checkDomain "${target}")"
-        if [[ -n "${validTarget}" ]]; then
-            validDomain=$(escapeDots "${validDomain}")
-            validTarget=$(escapeDots "${validTarget}")
-            sed -i "/^cname=${validDomain},${validTarget}$/Id" "${dnscustomcnamefile}"
-        else
-            echo "  ${CROSS} Invalid Target Passed!"
-            exit 1
-        fi
-    else
-        echo "  ${CROSS} Invalid Domain passed!"
-        exit 1
-    fi
-
-    # Restart dnsmasq to update removed custom CNAME records only if $reload not false
-    if [[ ! $reload == "false" ]]; then
-        RestartDNS
-    fi
-}
-
-SetRateLimit() {
-    local rate_limit_count rate_limit_interval reload
-    rate_limit_count="${args[2]}"
-    rate_limit_interval="${args[3]}"
-    reload="${args[4]}"
-
-    # Set rate-limit setting inf valid
-    if [ "${rate_limit_count}" -ge 0 ] && [ "${rate_limit_interval}" -ge 0 ]; then
-        addOrEditKeyValPair "${FTLconf}" "RATE_LIMIT" "${rate_limit_count}/${rate_limit_interval}"
-    fi
-
-    # Restart FTL to update rate-limit settings only if $reload not false
-    if [[ ! $reload == "false" ]]; then
-        RestartDNS
-    fi
-}
-
 main() {
     args=("$@")
 
     case "${args[1]}" in
         "-p" | "password"     ) SetWebPassword;;
-        "-c" | "celsius"      ) unit="C"; SetTemperatureUnit;;
-        "-f" | "fahrenheit"   ) unit="F"; SetTemperatureUnit;;
-        "-k" | "kelvin"       ) unit="K"; SetTemperatureUnit;;
-        "setdns"              ) SetDNSServers;;
-        "setexcludedomains"   ) SetExcludeDomains;;
-        "setexcludeclients"   ) SetExcludeClients;;
-        "restartdns"          ) RestartDNS;;
-        "setquerylog"         ) SetQueryLogOptions;;
-        "enabledhcp"          ) EnableDHCP;;
-        "disabledhcp"         ) DisableDHCP;;
-        "layout"              ) SetWebUILayout;;
-        "theme"               ) SetWebUITheme;;
         "-h" | "--help"       ) helpFunc;;
-        "addstaticdhcp"       ) AddDHCPStaticAddress;;
-        "removestaticdhcp"    ) RemoveDHCPStaticAddress;;
-        "-i" | "interface"    ) SetListeningMode "$@";;
-        "-t" | "teleporter"   ) Teleporter;;
-        "adlist"              ) CustomizeAdLists;;
-        "audit"               ) addAudit "$@";;
-        "clearaudit"          ) clearAudit;;
-        "-l" | "privacylevel" ) SetPrivacyLevel;;
-        "addcustomdns"        ) AddCustomDNSAddress;;
-        "removecustomdns"     ) RemoveCustomDNSAddress;;
-        "addcustomcname"      ) AddCustomCNAMERecord;;
-        "removecustomcname"   ) RemoveCustomCNAMERecord;;
-        "ratelimit"           ) SetRateLimit;;
         *                     ) helpFunc;;
     esac