diff --git a/.github/ISSUE_TEMPLATE.md b/.github/ISSUE_TEMPLATE.md
new file mode 100644
index 00000000..04303614
--- /dev/null
+++ b/.github/ISSUE_TEMPLATE.md
@@ -0,0 +1,7 @@
+##### Expected Behaviour:
+
+
+##### Actual Behaviour:
+
+
+##### Steps to reproduce this issue:
diff --git a/.github/PULL_REQUEST_TEMPLATE.md b/.github/PULL_REQUEST_TEMPLATE.md
new file mode 100644
index 00000000..071fdf89
--- /dev/null
+++ b/.github/PULL_REQUEST_TEMPLATE.md
@@ -0,0 +1,11 @@
+Fixes #[issue number] .
+
+Changes proposed in this pull request:
+
+- 
+
+- 
+
+- 
+
+@pihole/gravity
diff --git a/README.md b/README.md
index a0bf4cc3..9dc189e4 100644
--- a/README.md
+++ b/README.md
@@ -1,11 +1,18 @@
-# Automated Install 
-##### Designed For Raspberry Pi B, B+, 2, and Zero (with an Ethernet adapter)
+# Automated Install
+##### Designed For Raspberry Pi A+, B, B+, 2, Zero (with an Ethernet adapter), and also works on most Debian based distros!
 
-1. Install Raspbian 
+1. Install Raspbian on Raspberry Pi variants or a Debian based distribution on other hardware or virtual machines
 2. Run the command below
 
 ### ```curl -L install.pi-hole.net | bash```
 
+#### Alternative Semi-Automated install ####
+```
+wget -O basic-install.sh install.pi-hole.net
+chmod +x basic-install.sh
+./basic-install.sh
+```
+
 Once installed, [configure your router to have **DHCP clients use the Pi as their DNS server**](http://pi-hole.net/faq/can-i-set-the-pi-hole-to-be-the-dns-server-at-my-router-so-i-dont-have-to-change-settings-for-my-devices/) and then any device that connects to your network will have ads blocked without any further configuration.  Alternatively, you can manually set each device to [use the Raspberry Pi as its DNS server](http://pi-hole.net/faq/how-do-i-use-the-pi-hole-as-my-dns-server/).
 
 ## Pi-hole Is Free, But Powered By Your Donations
@@ -17,6 +24,7 @@ Once installed, [configure your router to have **DHCP clients use the Pi as thei
 [![Pi-hole exlplained](http://i.imgur.com/qNybJDX.png)](https://vimeo.com/135965232)
 
 ## Pi-hole Projects
+- [x86 Docker container that runs Pi-hole](https://hub.docker.com/r/diginc/pi-hole/)
 - [Pi-hole Chrome extension](https://chrome.google.com/webstore/detail/pi-hole-list-editor/hlnoeoejkllgkjbnnnhfolapllcnaglh) ([open source](https://github.com/packtloss/pihole-extension))
 - [Go Bananas for CHiP-hole ad blocking](https://www.hackster.io/jacobsalmela/chip-hole-network-wide-ad-blocker-98e037)
 - [Sky-Hole](http://dlaa.me/blog/post/skyhole)
diff --git a/adlists.default b/adlists.default
index dd391357..4a8c82db 100644
--- a/adlists.default
+++ b/adlists.default
@@ -1,8 +1,49 @@
-https://adaway.org/hosts.txt
+## Pi-hole ad-list default sources. Updated 21/02/2016 #########################
+#                                                                              #
+#  To make changes to this file:                                               #
+#    1. run `cp /etc/pihole/adlists.default /etc/pihole/adlists.list`           #
+#    2. run `nano /etc/pihole/adlists.list`                                    #
+#    3. Uncomment or comment any of the below lists                            #
+#                                                                              #
+#  Know of any other lists? Feel free to let us know about them, or add them   #
+#  to this file!                                                               #
+################################################################################
+
+# The below list amalgamates several lists we used previously.
+# See `https://github.com/StevenBlack/hosts` for details
+https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts
+
+# Other lists we consider safe:
 http://adblock.gjtech.net/?format=unix-hosts
-http://hosts-file.net/ad_servers.txt
-http://www.malwaredomainlist.com/hostslist/hosts.txt
-http://pgl.yoyo.org/adservers/serverlist.php?
-http://someonewhocares.org/hosts/hosts
-http://winhelp2002.mvps.org/hosts.txt
 http://mirror1.malwaredomains.com/files/justdomains
+http://sysctl.org/cameleon/hosts
+https://zeustracker.abuse.ch/blocklist.php?download=domainblocklist
+https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt
+https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt
+
+# hosts-file.net list. Updated frequently, but has been known to block legitimate sites.
+http://hosts-file.net/ad_servers.txt
+
+# Mahakala list. Has been known to block legitimage domains including the entire .com range.
+#http://adblock.mahakala.is/
+
+# ADZHOSTS list. Has been known to block legitimate domains
+#http://optimate.dl.sourceforge.net/project/adzhosts/HOSTS.txt
+
+# Windows 10 telemetry list
+#https://raw.githubusercontent.com/crazy-max/WindowsSpyBlocker/master/hostsBlockWindowsSpy.txt
+
+# Securemecca.com list - Also blocks "adult" sites (pornography/gambling etc)
+#http://securemecca.com/Downloads/hosts.txt
+
+# Quidsup's tracker list
+https://raw.githubusercontent.com/quidsup/notrack/master/trackers.txt
+
+# Block the BBC News website Breaking News banner
+#https://raw.githubusercontent.com/BreakingTheNews/BreakingTheNews.github.io/master/hosts
+
+
+# Untested Lists:
+#https://raw.githubusercontent.com/reek/anti-adblock-killer/master/anti-adblock-killer-filters.txt
+#http://spam404bl.com/spam404scamlist.txt
+#http://malwaredomains.lehigh.edu/files/domains.txt
diff --git a/advanced/Scripts/blacklist.sh b/advanced/Scripts/blacklist.sh
index 70b8131a..0eab679d 100644
--- a/advanced/Scripts/blacklist.sh
+++ b/advanced/Scripts/blacklist.sh
@@ -51,13 +51,13 @@ if [[ -f $piholeIPv6file ]];then
 fi
 
 
-function HandleOther(){	
+function HandleOther(){
   #check validity of domain
 	validDomain=$(echo $1 | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
-	
+
 	if [ -z "$validDomain" ]; then
 		echo $1 is not a valid argument or domain name
-	else	  
+	else
 	  domList=("${domList[@]}" $validDomain)
 	fi
 }
@@ -66,9 +66,9 @@ function PopBlacklistFile(){
 	#check blacklist file exists, and if not, create it
 	if [[ ! -f $blacklist ]];then
   	  touch $blacklist
-	fi	
+	fi
 	for dom in "${domList[@]}"
-	do	  
+	do
 	  if $addmode; then
 	  	AddDomain $dom
 	  else
@@ -97,7 +97,7 @@ function AddDomain(){
 }
 
 function RemoveDomain(){
-  
+
   bool=false
   grep -Ex -q "$1" $blacklist || bool=true
   if $bool; then
@@ -110,42 +110,42 @@ function RemoveDomain(){
     if $versbose; then
     echo "::: Un-blacklisting $dom..."
     fi
-    domToRemoveList=("${domToRemoveList[@]}" $1)    
-    modifyHost=true	  	
-  fi  	
+    domToRemoveList=("${domToRemoveList[@]}" $1)
+    modifyHost=true
+  fi
 }
 
-function ModifyHostFile(){	
+function ModifyHostFile(){
 	 if $addmode; then
 	    #add domains to the hosts file
 	    if [[ -r $blacklist ]];then
 	      numberOf=$(cat $blacklist | sed '/^\s*$/d' | wc -l)
         plural=; [[ "$numberOf" != "1" ]] && plural=s
         echo ":::"
-        echo -n "::: Modifying HOSTS file to blacklist $numberOf domain${plural}..."	   		    
-	    	if [[ -n $piholeIPv6 ]];then	    	  
+        echo -n "::: Modifying HOSTS file to blacklist $numberOf domain${plural}..."
+	    	if [[ -n $piholeIPv6 ]];then
 	    	  cat $blacklist | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $adList
-	      else	        
+	      else
 	      	cat $blacklist | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >>$adList
-	      fi		    
-		   
+	      fi
+
 	  	fi
 	  else
-		
+
 		echo ":::"
 	  for dom in "${domToRemoveList[@]}"
-		do	  
-	      #we need to remove the domains from the blacklist file and the host file	     
+		do
+	      #we need to remove the domains from the blacklist file and the host file
 				echo "::: $dom"
 				echo -n ":::    removing from HOSTS file..."
-	      echo $dom | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /[^.]'{}'(?!.)/;' $adList  
+	      echo $dom | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /[^.]'{}'(?!.)/;' $adList
 	      echo " done!"
 	      echo -n ":::    removing from blackist.txt..."
 	      echo $dom | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' $blacklist
 	      echo " done!"
-		done	  
+		done
 		fi
-	  
+
 }
 
 function Reload() {
@@ -170,17 +170,17 @@ function Reload() {
 for var in "$@"
 do
   case "$var" in
-    "-nr"| "--noreload"  ) reload=false;;        			
+    "-nr"| "--noreload"  ) reload=false;;
     "-d" | "--delmode"   ) addmode=false;;
     "-f" | "--force"     ) force=true;;
-    "-q" | "--quiet"     ) versbose=false;;  			
+    "-q" | "--quiet"     ) versbose=false;;
     *                    ) HandleOther $var;;
   esac
 done
 
 PopBlacklistFile
 
-if $modifyHost || $force; then	
+if $modifyHost || $force; then
 	ModifyHostFile
 else
   if $versbose; then
diff --git a/advanced/Scripts/chronometer.sh b/advanced/Scripts/chronometer.sh
index 2fe00498..8cd9f042 100755
--- a/advanced/Scripts/chronometer.sh
+++ b/advanced/Scripts/chronometer.sh
@@ -51,9 +51,13 @@ function CalcblockedToday(){
 
 function CalcPercentBlockedToday(){
 	if [ "$queriesToday" != "Err." ] && [ "$blockedToday" != "Err." ]; then
-		#scale 2 rounds the number down, so we'll do scale 4 and then trim the last 2 zeros
-		percentBlockedToday=$(echo "scale=4; $blockedToday/$queriesToday*100" | bc)		
-		percentBlockedToday=$(sed 's/.\{2\}$//' <<< "$percentBlockedToday")		
+		if [ "$queriesToday" != 0 ]; then #Fixes divide by zero error :)
+		 #scale 2 rounds the number down, so we'll do scale 4 and then trim the last 2 zeros
+			percentBlockedToday=$(echo "scale=4; $blockedToday/$queriesToday*100" | bc)
+			percentBlockedToday=$(sed 's/.\{2\}$//' <<< "$percentBlockedToday")
+		else
+			percentBlockedToday=0
+		fi
 	fi
 }
 
@@ -69,9 +73,9 @@ function outputJSON(){
 	CalcQueriesToday
 	CalcblockedToday
 	CalcPercentBlockedToday
-	
+
 	CalcBlockedDomains
-	
+
 	printf '{"domains_being_blocked":"%s","dns_queries_today":"%s","ads_blocked_today":"%s","ads_percentage_today":"%s"}\n' "$blockedDomainsTotal" "$queriesToday" "$blockedToday" "$percentBlockedToday"
 }
 
@@ -84,29 +88,31 @@ function normalChrono(){
 		echo "        $(ifconfig eth0 | awk '/inet addr/ {print $2}' | cut -d':' -f2)"
 		echo ""
 		uptime | cut -d' ' -f11-
+		#uptime -p	#Doesn't work on all versions of uptime
+		uptime | awk -F'( |,|:)+' '{if ($7=="min") m=$6; else {if ($7~/^day/) {d=$6;h=$8;m=$9} else {h=$6;m=$7}}} {print d+0,"days,",h+0,"hours,",m+0,"minutes."}'
 		echo "-------------------------------"
 		# Uncomment to continually read the log file and display the current domain being blocked
 		#tail -f /var/log/pihole.log | awk '/\/etc\/pihole\/gravity.list/ {if ($7 != "address" && $7 != "name" && $7 != "/etc/pihole/gravity.list") print $7; else;}'
-		
+
 		#uncomment next 4 lines to use original query count calculation
 		#today=$(date "+%b %e")
 		#todaysQueryCount=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ {print $7}' | wc -l)
 		#todaysQueryCountV4=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ && /\[A\]/ {print $7}' | wc -l)
 		#todaysQueryCountV6=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ && /\[AAAA\]/ {print $7}' | wc -l)
-				
-		
+
+
 		CalcQueriesToday
 		CalcblockedToday
 		CalcPercentBlockedToday
-		
+
 		CalcBlockedDomains
-		
+
 		echo "Blocking:      $blockedDomainsTotal"
 		#below commented line does not add up to todaysQueryCount
 		#echo "Queries:       $todaysQueryCountV4 / $todaysQueryCountV6"
 		echo "Queries:       $queriesToday" #same total calculation as dashboard
 	  echo "Pi-holed:      $blockedToday ($percentBlockedToday%)"
-		
+
 		sleep 5
 	done
 }
@@ -120,7 +126,7 @@ function displayHelp(){
     echo "Options:"
     echo "  -j, --json		output stats as JSON formatted string"
     echo "  -h, --help	display this help text"
-    
+
     exit 1
 }
 
@@ -132,7 +138,7 @@ for var in "$@"
 do
   case "$var" in
     "-j" | "--json"  ) outputJSON;;
-    "-h" | "--help"  ) displayHelp;;        			
+    "-h" | "--help"  ) displayHelp;;
     *                ) exit 1;;
   esac
 done
diff --git a/advanced/Scripts/setupLCD.sh b/advanced/Scripts/setupLCD.sh
new file mode 100644
index 00000000..df2be704
--- /dev/null
+++ b/advanced/Scripts/setupLCD.sh
@@ -0,0 +1,89 @@
+#!/usr/bin/env bash
+# Pi-hole: A black hole for Internet advertisements
+# (c) 2015 by Jacob Salmela
+# Network-wide ad blocking via your Raspberry Pi
+# http://pi-hole.net
+# Automatically configures the Pi to use the 2.8 LCD screen to display stats on it (also works over ssh)
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+
+############ FUNCTIONS ###########
+# Run this script as root or under sudo
+echo ":::"
+if [[ $EUID -eq 0 ]];then
+	echo "::: You are root."
+else
+	echo "::: sudo will be used."
+  # Check if it is actually installed
+  # If it isn't, exit because the install cannot complete
+  if [[ $(dpkg-query -s sudo) ]];then
+		export SUDO="sudo"
+  else
+		echo "::: Please install sudo or run this script as root."
+    exit 1
+  fi
+fi
+
+# Borrowed from adafruit-pitft-helper < borrowed from raspi-config
+# https://github.com/adafruit/Adafruit-PiTFT-Helper/blob/master/adafruit-pitft-helper#L324-L334
+getInitSys() {
+  if command -v systemctl > /dev/null && systemctl | grep -q '\-\.mount'; then
+    SYSTEMD=1
+  elif [ -f /etc/init.d/cron ] && [ ! -h /etc/init.d/cron ]; then
+    SYSTEMD=0
+  else
+    echo "Unrecognised init system"
+    return 1
+  fi
+}
+
+# Borrowed from adafruit-pitft-helper:
+# https://github.com/adafruit/Adafruit-PiTFT-Helper/blob/master/adafruit-pitft-helper#L274-L285
+autoLoginPiToConsole() {
+  if [ -e /etc/init.d/lightdm ]; then
+    if [ $SYSTEMD -eq 1 ]; then
+      $SUDO systemctl set-default multi-user.target
+      $SUDO ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
+    else
+      $SUDO update-rc.d lightdm disable 2
+      $SUDO sed /etc/inittab -i -e "s/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/"
+      fi
+  fi
+}
+
+######### SCRIPT ###########
+# Set pi to log in automatically
+getInitSys
+autoLoginPiToConsole
+
+# Set chronomter to run automatically when pi logs in
+echo /usr/local/bin/chronometer.sh >> /home/pi/.bashrc
+# OR
+#$SUDO echo /usr/local/bin/chronometer.sh >> /etc/profile
+
+# Set up the LCD screen based on Adafruits instuctions:
+# https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/easy-install
+curl -SLs https://apt.adafruit.com/add-pin | $SUDO bash
+$SUDO apt-get -y install raspberrypi-bootloader
+$SUDO apt-get -y install adafruit-pitft-helper
+$SUDO adafruit-pitft-helper -t 28r
+
+# Download the cmdline.txt file that prevents the screen from going blank after a period of time
+$SUDO mv /boot/cmdline.txt /boot/cmdline.orig
+$SUDO curl -o /boot/cmdline.txt https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/cmdline.txt
+
+# Back up the original file and download the new one
+$SUDO mv /etc/default/console-setup /etc/default/console-setup.orig
+$SUDO curl -o /etc/default/console-setup https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/console-setup
+
+# Instantly apply the font change to the LCD screen
+$SUDO setupcon
+
+$SUDO reboot
+
+# Start showing the stats on the screen by running the command on another tty:
+# http://unix.stackexchange.com/questions/170063/start-a-process-on-a-different-tty
+#setsid sh -c 'exec /usr/local/bin/chronometer.sh <> /dev/tty1 >&0 2>&1'
diff --git a/advanced/Scripts/updateDashboard.sh b/advanced/Scripts/updateDashboard.sh
index edf04896..6955683d 100644
--- a/advanced/Scripts/updateDashboard.sh
+++ b/advanced/Scripts/updateDashboard.sh
@@ -63,7 +63,7 @@ make_repo() {
 update_repo() {
     # pull the latest commits
     cd "$WEB_INTERFACE_DIR"
-    git pull    
+    git pull
 }
 
 main
diff --git a/advanced/Scripts/whitelist.sh b/advanced/Scripts/whitelist.sh
index 853c3b79..79f71a71 100755
--- a/advanced/Scripts/whitelist.sh
+++ b/advanced/Scripts/whitelist.sh
@@ -50,13 +50,13 @@ if [[ -f $piholeIPv6file ]];then
 fi
 
 
-function HandleOther(){	
+function HandleOther(){
   #check validity of domain
 	validDomain=$(echo $1 | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
-	
+
 	if [ -z "$validDomain" ]; then
 		echo "::: $1 is not a valid argument or domain name"
-	else	  
+	else
 	  domList=("${domList[@]}" $validDomain)
 	fi
 }
@@ -65,9 +65,9 @@ function PopWhitelistFile(){
 	#check whitelist file exists, and if not, create it
 	if [[ ! -f $whitelist ]];then
   	  touch $whitelist
-	fi	
+	fi
 	for dom in "${domList[@]}"
-	do	  
+	do
 	  if $addmode; then
 	  	AddDomain $dom
 	  else
@@ -79,7 +79,7 @@ function PopWhitelistFile(){
 function AddDomain(){
 #| sed 's/\./\\./g'
 	bool=false
-	
+
 	grep -Ex -q "$1" $whitelist || bool=true
 	if $bool; then
 	  #domain not found in the whitelist file, add it!
@@ -99,7 +99,7 @@ function AddDomain(){
 }
 
 function RemoveDomain(){
-  
+
   bool=false
   grep -Ex -q "$1" $whitelist || bool=true
   if $bool; then
@@ -113,11 +113,11 @@ function RemoveDomain(){
     #echo "::: Un-whitelisting $dom..."
     #fi
     domToRemoveList=("${domToRemoveList[@]}" $1)
-    modifyHost=true	  	
-  fi  	
+    modifyHost=true
+  fi
 }
 
-function ModifyHostFile(){	
+function ModifyHostFile(){
 	 if $addmode; then
 	    #remove domains in  from hosts file
 	    if [[ -r $whitelist ]];then
@@ -129,19 +129,19 @@ function ModifyHostFile(){
         awk -F':' '{print $1}' $whitelist | while read line; do echo "$piholeIP $line"; done > /etc/pihole/whitelist.tmp
         awk -F':' '{print $1}' $whitelist | while read line; do echo "$piholeIPv6 $line"; done >> /etc/pihole/whitelist.tmp
         echo "l" >> /etc/pihole/whitelist.tmp
-        grep -F -x -v -f /etc/pihole/whitelist.tmp /etc/pihole/gravity.list > /etc/pihole/gravity.tmp        
+        grep -F -x -v -f /etc/pihole/whitelist.tmp /etc/pihole/gravity.list > /etc/pihole/gravity.tmp
         rm /etc/pihole/gravity.list
         mv /etc/pihole/gravity.tmp /etc/pihole/gravity.list
         rm /etc/pihole/whitelist.tmp
         echo " done!"
-	  	  
+
 	  	fi
 	  else
 	    #we need to add the removed domains to the hosts file
 	    echo ":::"
 	    echo "::: Modifying HOSTS file to un-whitelist domains..."
 	    for rdom in "${domToRemoveList[@]}"
-	    do	      
+	    do
 	    	if [[ -n $piholeIPv6 ]];then
 	    	  echo -n ":::    Un-whitelisting $rdom on IPv4 and IPv6..."
 	    	  echo $rdom | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $adList
@@ -155,7 +155,7 @@ function ModifyHostFile(){
 	      echo $rdom| sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' $whitelist
 	      echo " done!"
 	    done
-	  fi	
+	  fi
 }
 
 function Reload() {
@@ -179,10 +179,10 @@ function Reload() {
 for var in "$@"
 do
   case "$var" in
-    "-nr"| "--noreload"  ) reload=false;;        			
+    "-nr"| "--noreload"  ) reload=false;;
     "-d" | "--delmode"   ) addmode=false;;
     "-f" | "--force"     ) force=true;;
-    "-q" | "--quiet"     ) versbose=false;;  			
+    "-q" | "--quiet"     ) versbose=false;;
     *                    ) HandleOther $var;;
   esac
 done
diff --git a/advanced/cmdline.txt b/advanced/cmdline.txt
new file mode 100644
index 00000000..84d52b79
--- /dev/null
+++ b/advanced/cmdline.txt
@@ -0,0 +1 @@
+dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait fbcon=map:10 fbcon=font:VGA8x8 consoleblank=0
diff --git a/advanced/console-setup b/advanced/console-setup
new file mode 100644
index 00000000..f12be6eb
--- /dev/null
+++ b/advanced/console-setup
@@ -0,0 +1,17 @@
+# CONFIGURATION FILE FOR SETUPCON
+
+# Consult the console-setup(5) manual page.
+
+ACTIVE_CONSOLES="/dev/tty[1-6]"
+
+CHARMAP="UTF-8"
+
+# For best results with the Adafruit 2.8 LCD and Pi-hole's chronometer
+CODESET="guess"
+FONTFACE="Terminus"
+FONTSIZE="10x20"
+
+VIDEOMODE=
+
+# The following is an example how to use a braille font
+# FONT='lat9w-08.psf.gz brl-8x8.psf'
diff --git a/advanced/dnsmasq.conf.original b/advanced/dnsmasq.conf.original
index 598d6390..9e4cc92e 100644
--- a/advanced/dnsmasq.conf.original
+++ b/advanced/dnsmasq.conf.original
@@ -27,8 +27,8 @@
 
 # Replies which are not DNSSEC signed may be legitimate, because the domain
 # is unsigned, or may be forgeries. Setting this option tells dnsmasq to
-# check that an unsigned reply is OK, by finding a secure proof that a DS 
-# record somewhere between the root and the domain does not exist. 
+# check that an unsigned reply is OK, by finding a secure proof that a DS
+# record somewhere between the root and the domain does not exist.
 # The cost of setting this is that even queries in unsigned domains will need
 # one or more extra DNS queries to verify.
 #dnssec-check-unsigned
@@ -183,11 +183,11 @@
 #dhcp-range=1234::2, 1234::500, 64, 12h
 
 # Do Router Advertisements, BUT NOT DHCP for this subnet.
-#dhcp-range=1234::, ra-only 
+#dhcp-range=1234::, ra-only
 
 # Do Router Advertisements, BUT NOT DHCP for this subnet, also try and
-# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack 
-# hosts. Use the DHCPv4 lease to derive the name, network segment and 
+# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack
+# hosts. Use the DHCPv4 lease to derive the name, network segment and
 # MAC address and assume that the host will also have an
 # IPv6 address calculated using the SLAAC alogrithm.
 #dhcp-range=1234::, ra-names
@@ -210,9 +210,9 @@
 #dhcp-range=1234::, ra-stateless, ra-names
 
 # Do router advertisements for all subnets where we're doing DHCPv6
-# Unless overriden by ra-stateless, ra-names, et al, the router 
+# Unless overriden by ra-stateless, ra-names, et al, the router
 # advertisements will have the M and O bits set, so that the clients
-# get addresses and configuration from DHCPv6, and the A bit reset, so the 
+# get addresses and configuration from DHCPv6, and the A bit reset, so the
 # clients don't use SLAAC addresses.
 #enable-ra
 
@@ -278,11 +278,11 @@
 # any machine with Ethernet address starting 11:22:33:
 #dhcp-host=11:22:33:*:*:*,set:red
 
-# Give a fixed IPv6 address and name to client with       
+# Give a fixed IPv6 address and name to client with
 # DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2
 # Note the MAC addresses CANNOT be used to identify DHCPv6 clients.
 # Note also the they [] around the IPv6 address are obilgatory.
-#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] 
+#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5]
 
 # Ignore any clients which are not specified in dhcp-host lines
 # or /etc/ethers. Equivalent to ISC "deny unknown-clients".
@@ -338,7 +338,7 @@
 # Send DHCPv6 option. Note [] around IPv6 addresses.
 #dhcp-option=option6:dns-server,[1234::77],[1234::88]
 
-# Send DHCPv6 option for namservers as the machine running 
+# Send DHCPv6 option for namservers as the machine running
 # dnsmasq and another.
 #dhcp-option=option6:dns-server,[::],[1234::88]
 
@@ -645,4 +645,4 @@
 #conf-dir=/etc/dnsmasq.d,.bak
 
 # Include all files in a directory which end in .conf
-#conf-dir=/etc/dnsmasq.d/*.conf 
+#conf-dir=/etc/dnsmasq.d/*.conf
diff --git a/automated install/basic-install.sh b/automated install/basic-install.sh
index b54be6d7..4e6c74fa 100755
--- a/automated install/basic-install.sh	
+++ b/automated install/basic-install.sh	
@@ -111,10 +111,29 @@ welcomeDialogs() {
 	whiptail --msgbox --backtitle "Plea" --title "Free and open source" "The Pi-hole is free, but powered by your donations:  http://pi-hole.net/donate" $r $c
 
 	# Explain the need for a static address
-	whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.	
+	whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
 	In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
 }
 
+
+verifyFreeDiskSpace() {
+	# 25MB is the minimum space needed (20MB install + 5MB one day of logs.)
+	requiredFreeBytes=51200
+
+	existingFreeBytes=`df -lk / 2>&1 | awk '{print $4}' | head -2 | tail -1`
+	if ! [[ "$existingFreeBytes" =~ ^([0-9])+$ ]]; then
+		existingFreeBytes=`df -lk /dev 2>&1 | awk '{print $4}' | head -2 | tail -1`
+	fi
+
+	if [[ $existingFreeBytes -lt $requiredFreeBytes ]]; then
+		whiptail --msgbox --backtitle "Insufficient Disk Space" --title "Insufficient Disk Space" "\nYour system appears to be low on disk space. pi-hole recomends a minimum of $requiredFreeBytes Bytes.\nYou only have $existingFreeBytes Free.\n\nIf this is a new install you may need to expand your disk.\n\nTry running:\n    'sudo raspi-config'\nChoose the 'expand file system option'\n\nAfter rebooting, run this installation again.\n\ncurl -L install.pi-hole.net | bash\n" $r $c
+		echo "$existingFreeBytes is less than $requiredFreeBytes"
+		echo "Insufficient free space, exiting..."
+		exit 1
+	fi
+}
+
+
 chooseInterface() {
 	# Turn the available interfaces into an array so it can be used with a whiptail dialog
 	interfacesArray=()
@@ -145,9 +164,15 @@ chooseInterface() {
 		echo "::: Cancel selected, exiting...."
 		exit 1
 	fi
-	
+
 }
 
+cleanupIPv6() {
+	# Removes IPv6 indicator file if we are not using IPv6
+	if [ -f "/etc/pihole/.useIPv6" ] && [ ! $useIPv6 ]; then
+		rm /etc/pihole/.useIPv6
+	fi
+}
 
 use4andor6() {
 	# Let use select IPv4 and/or IPv6
@@ -163,7 +188,7 @@ use4andor6() {
 			IPv6	)		useIPv6=true;;
 			esac
 		done
-		
+
 		if [ $useIPv4 ] && [ ! $useIPv6 ]; then
 			getStaticIPv4Settings
 			setStaticIPv4
@@ -187,6 +212,7 @@ use4andor6() {
 			echo "::: Exiting"
 			exit 1
 		fi
+		cleanupIPv6
 	else
 		echo "::: Cancel selected. Exiting..."
 		exit 1
@@ -278,10 +304,31 @@ setStaticIPv4() {
 	fi
 }
 
+function valid_ip()
+{
+	local  ip=$1
+	local  stat=1
+
+	if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
+		OIFS=$IFS
+		IFS='.'
+		ip=($ip)
+		IFS=$OIFS
+		[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
+		&& ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
+		stat=$?
+	fi
+	return $stat
+}
+
 setDNS(){
-	DNSChoseCmd=(whiptail --separate-output --radiolist "Select Upstream DNS Provider" $r $c 2)
+	DNSChoseCmd=(whiptail --separate-output --radiolist "Select Upstream DNS Provider. To use your own, select Custom." $r $c 6)
 	DNSChooseOptions=(Google "" on
-					  OpenDNS "" off)
+					  OpenDNS "" off
+					  Level3 "" off
+					  Norton "" off
+					  Comodo "" off
+					  Custom "" off)
 	DNSchoices=$("${DNSChoseCmd[@]}" "${DNSChooseOptions[@]}" 2>&1 >/dev/tty)
 	if [[ $? = 0 ]];then
 		case $DNSchoices in
@@ -295,6 +342,79 @@ setDNS(){
 				piholeDNS1="208.67.222.222"
 				piholeDNS2="208.67.220.220"
 				;;
+			Level3)
+				echo "::: Using Level3 servers."
+				piholeDNS1="4.2.2.1"
+				piholeDNS2="4.2.2.2"
+				;;
+			Norton)
+				echo "::: Using Norton ConnectSafe servers."
+				piholeDNS1="199.85.126.10"
+				piholeDNS2="199.85.127.10"
+				;;
+			Comodo)
+				echo "::: Using Comodo Secure servers."
+				piholeDNS1="8.26.56.26"
+				piholeDNS2="8.20.247.20"
+				;;
+			Custom)
+				until [[ $DNSSettingsCorrect = True ]]
+				do
+
+					strInvalid="Invalid"
+
+					if [ ! $piholeDNS1 ]; then
+						if [ ! $piholeDNS2 ]; then
+							prePopulate=""
+						else
+							prePopulate=", $piholeDNS2"
+						fi
+					elif  [ $piholeDNS1 ] && [ ! $piholeDNS2 ]; then
+						prePopulate="$piholeDNS1"
+					elif [ $piholeDNS1 ] && [ $piholeDNS2 ]; then
+						prePopulate="$piholeDNS1, $piholeDNS2"
+					fi
+
+					piholeDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)"  --inputbox "Enter your desired upstream DNS provider(s), seperated by a comma.\n\nFor example '8.8.8.8, 8.8.4.4'" $r $c "$prePopulate" 3>&1 1>&2 2>&3)
+					if [[ $? = 0 ]];then
+						piholeDNS1=$(echo $piholeDNS | sed 's/[, \t]\+/,/g' | awk -F, '{print$1}')
+						piholeDNS2=$(echo $piholeDNS | sed 's/[, \t]\+/,/g' | awk -F, '{print$2}')
+
+						if ! valid_ip $piholeDNS1 || [ ! $piholeDNS1 ]; then
+							piholeDNS1=$strInvalid
+						fi
+
+						if ! valid_ip $piholeDNS2 && [ $piholeDNS2 ]; then
+							piholeDNS2=$strInvalid
+						fi
+
+					else
+						echo "::: Cancel selected, exiting...."
+						exit 1
+					fi
+
+					if [[ $piholeDNS1 == $strInvalid ]] || [[ $piholeDNS2 == $strInvalid ]]; then
+						whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\n\n    DNS Server 1:   $piholeDNS1\n    DNS Server 2:   $piholeDNS2" $r $c
+
+						if [[ $piholeDNS1 == $strInvalid ]]; then
+							piholeDNS1=""
+						fi
+
+						if [[ $piholeDNS2 == $strInvalid ]]; then
+							piholeDNS2=""
+						fi
+
+						DNSSettingsCorrect=False
+					else
+						if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\n    DNS Server 1:   $piholeDNS1\n    DNS Server 2:   $piholeDNS2" $r $c) then
+								DNSSettingsCorrect=True
+						else
+							# If the settings are wrong, the loop continues
+							DNSSettingsCorrect=False
+						fi
+					fi
+				done
+				;;
 		esac
 	else
 		echo "::: Cancel selected. Exiting..."
@@ -307,11 +427,11 @@ versionCheckDNSmasq(){
   dnsFile1="/etc/dnsmasq.conf"
   dnsFile2="/etc/dnsmasq.conf.orig"
   dnsSearch="addn-hosts=/etc/pihole/gravity.list"
-  
+
   defaultFile="/etc/.pihole/advanced/dnsmasq.conf.original"
   newFileToInstall="/etc/.pihole/advanced/01-pihole.conf"
   newFileFinalLocation="/etc/dnsmasq.d/01-pihole.conf"
-  
+
   if [ -f $dnsFile1 ]; then
       echo -n ":::    Existing dnsmasq.conf found..."
       if grep -q $dnsSearch $dnsFile1; then
@@ -323,20 +443,28 @@ versionCheckDNSmasq(){
           $SUDO cp $defaultFile $dnsFile1
           echo " done."
       else
-        echo " it is not a pi-hole file, leaving alone!"        
+        echo " it is not a pi-hole file, leaving alone!"
       fi
   else
       echo -n ":::    No dnsmasq.conf found.. restoring default dnsmasq.conf..."
       $SUDO cp $defaultFile $dnsFile1
       echo " done."
   fi
-  
-  echo ":::    Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf..."
+
+  echo -n ":::    Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf..."
   $SUDO cp $newFileToInstall $newFileFinalLocation
   echo " done."
   $SUDO sed -i "s/@INT@/$piholeInterface/" $newFileFinalLocation
-  $SUDO sed -i "s/@DNS1@/$piholeDNS1/" $newFileFinalLocation
-  $SUDO sed -i "s/@DNS2@/$piholeDNS2/" $newFileFinalLocation
+  if [[ "$piholeDNS1" != "" ]]; then
+    $SUDO sed -i "s/@DNS1@/$piholeDNS1/" $newFileFinalLocation
+  else
+    $SUDO sed -i '/^server=@DNS1@/d' $newFileFinalLocation
+  fi
+  if [[ "$piholeDNS2" != "" ]]; then
+    $SUDO sed -i "s/@DNS2@/$piholeDNS2/" $newFileFinalLocation
+  else
+    $SUDO sed -i '/^server=@DNS2@/d' $newFileFinalLocation
+  fi
 }
 
 installScripts() {
@@ -366,7 +494,7 @@ stopServices() {
 	# Stop dnsmasq and lighttpd
 	$SUDO echo ":::"
 	$SUDO echo -n "::: Stopping services..."
-	$SUDO service dnsmasq stop & spinner $! || true
+	#$SUDO service dnsmasq stop & spinner $! || true
 	$SUDO service lighttpd stop & spinner $! || true
 	$SUDO echo " done."
 }
@@ -393,7 +521,7 @@ checkForDependencies() {
 	  fi
 		echo ":::"
 		echo -n "::: Checking apt-get for upgraded packages...."
-		updatesToInstall=$(sudo apt-get -s -o Debug::NoLocking=true upgrade | grep -c ^Inst)
+		updatesToInstall=$($SUDO apt-get -s -o Debug::NoLocking=true upgrade | grep -c ^Inst)
 		echo " done!"
 		echo ":::"
 		if [[ $updatesToInstall -eq "0" ]]; then
@@ -507,9 +635,9 @@ installCron() {
 runGravity() {
 	# Rub gravity.sh to build blacklists
 	$SUDO echo ":::"
-	$SUDO echo "::: Preparing to run gravity.sh to refresh hosts..."	
+	$SUDO echo "::: Preparing to run gravity.sh to refresh hosts..."
 	if ls /etc/pihole/list* 1> /dev/null 2>&1; then
-		echo "::: Cleaning up previous install (preserving whitelist/blacklist)"		
+		echo "::: Cleaning up previous install (preserving whitelist/blacklist)"
 		$SUDO rm /etc/pihole/list.*
 	fi
 	#Don't run as SUDO, this was causing issues
@@ -519,21 +647,44 @@ runGravity() {
 	/usr/local/bin/gravity.sh
 }
 
+setUser(){
+	# Check if user pihole exists and create if not
+	echo "::: Checking if user 'pihole' exists..."
+	if id -u pihole > /dev/null 2>&1; then
+		echo "::: User 'pihole' already exists"
+	else
+        echo "::: User 'pihole' doesn't exist.  Creating..."
+		$SUDO useradd -r -s /usr/sbin/nologin pihole
+	fi
+}
+
+setPassword() {
+	# Password needed to authorize changes to lists from admin page
+	pass=$(whiptail --passwordbox "Please enter a password to secure your Pi-hole web interface." 10 50 3>&1 1>&2 2>&3)
+
+	if [ $? = 0 ]; then
+		# Entered password
+		echo $pass > /etc/pihole/password.txt
+	else
+		echo "::: Cancel selected, exiting...."
+		exit 1
+	fi
+}
 
 installPihole() {
 	# Install base files and web interface
 	checkForDependencies # done
 	stopServices
+	setUser
 	$SUDO mkdir -p /etc/pihole/
 	$SUDO chown www-data:www-data /var/www/html
 	$SUDO chmod 775 /var/www/html
-	$SUDO usermod -a -G www-data pi
+	$SUDO usermod -a -G www-data pihole
 	$SUDO lighty-enable-mod fastcgi fastcgi-php > /dev/null
 
 	getGitFiles
 	installScripts
 	installConfigs
-	#installWebAdmin
 	CreateLogFile
 	installPiholeWeb
 	installCron
@@ -557,6 +708,9 @@ The install log is in /etc/pihole." $r $c
 $SUDO mkdir -p /etc/pihole/
 welcomeDialogs
 
+# Verify there is enough disk space for the install
+verifyFreeDiskSpace
+
 # Just back up the original Pi-hole right away since it won't take long and it gets it out of the way
 backupLegacyPihole
 # Find interfaces and let the user choose one
@@ -567,6 +721,9 @@ use4andor6
 # Decide what upstream DNS Servers to use
 setDNS
 
+# Set the admin page password
+setPassword
+
 # Install and log everything to a file
 installPihole | tee $tmpLog
 
@@ -577,7 +734,7 @@ displayFinalMessage
 
 echo -n "::: Restarting services..."
 # Start services
-$SUDO service dnsmasq start
+$SUDO service dnsmasq restart
 $SUDO service lighttpd start
 echo " done."
 
diff --git a/block hulu ads/lighttpd.conf b/block hulu ads/lighttpd.conf
index 9e8d1f80..636fd07d 100644
--- a/block hulu ads/lighttpd.conf	
+++ b/block hulu ads/lighttpd.conf	
@@ -38,6 +38,6 @@ include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port
 include_shell "/usr/share/lighttpd/create-mime.assign.pl"
 include_shell "/usr/share/lighttpd/include-conf-enabled.pl"
 
-$HTTP["host"] =~ "ads.hulu.com|ads-v-darwin.hulu.com" {
+$HTTP["host"] =~ "ads.hulu.com|ads-v-darwin.hulu.com|ads-e-darwin.hulu.com" {
 	url.redirect = ( ".*" => "http://192.168.1.101:8200/MediaItems/19.mov")
 }
diff --git a/gravity.sh b/gravity.sh
index 3004b8a2..33f5d6d5 100755
--- a/gravity.sh
+++ b/gravity.sh
@@ -31,6 +31,8 @@ piholeIPv6file=/etc/pihole/.useIPv6
 
 adListFile=/etc/pihole/adlists.list
 adListDefault=/etc/pihole/adlists.default
+whitelistScript=/usr/local/bin/whitelist.sh
+blacklistScript=/usr/local/bin/blacklist.sh
 
 if [[ -f $piholeIPfile ]];then
     # If the file exists, it means it was exported from the installation script and we should use that value instead of detecting it in this script
@@ -98,18 +100,28 @@ function gravity_collapse() {
 		echo -n "::: Custom adList file detected. Reading..."
 		sources=()
 		while read -a line; do
-			sources+=($line)
+			#Do not read commented out or blank lines
+			if [[ $line = \#* ]] || [[ ! $line ]]; then
+				echo "" > /dev/null
+			else
+				sources+=($line)
+			fi
 		done < $adListFile
-		echo " done!"	
+		echo " done!"
 	else
 		#no custom file found, use defaults!
 		echo -n "::: No custom adlist file detected, reading from default file..."
 				sources=()
 		while read -a line; do
-			sources+=($line)
+			#Do not read commented out or blank lines
+			if [[ $line = \#* ]] || [[ ! $line ]]; then
+				echo "" > /dev/null
+			else
+				sources+=($line)
+			fi
 		done < $adListDefault
-		echo " done!"	
-	fi	
+		echo " done!"
+	fi
 
 	# Create the pihole resource directory if it doesn't exist.  Future files will be stored here
 	if [[ -d $piholeDir ]];then
@@ -157,9 +169,9 @@ function gravity_transport() {
 	fi
 
 	# Silently curl url
-	curl -s $cmd_ext $heisenbergCompensator -A "$agent" $url > $patternBuffer 
+	curl -s $cmd_ext $heisenbergCompensator -A "$agent" $url > $patternBuffer
 	# Check for list updates
-	gravity_patternCheck $patternBuffer 
+	gravity_patternCheck $patternBuffer
 
 	# Cleanup
 	rm -f $patternBuffer
@@ -198,7 +210,7 @@ function gravity_spinup() {
                 # Default is a simple request
                 *) cmd_ext=""
         esac
-        gravity_transport $url $cmd_ext $agent
+        gravity_transport "$url" "$cmd_ext" "$agent"
 	done
 }
 
@@ -207,26 +219,26 @@ function gravity_Schwarzchild() {
   echo "::: "
 	# Find all active domains and compile them into one file and remove CRs
 	echo -n "::: Aggregating list of domains..."
-	truncate -s 0 $piholeDir/$matterandlight & spinner $! 
+	truncate -s 0 $piholeDir/$matterandlight & spinner $!
 	for i in "${activeDomains[@]}"
 	do
    		cat $i |tr -d '\r' >> $piholeDir/$matterandlight
 	done
 	echo " done!"
-	
+
 }
 
 
 function gravity_Blacklist(){
 	# Append blacklist entries if they exist
 	echo -n "::: Running blacklist script to update HOSTS file...."
-	blacklist.sh -f -nr -q > /dev/null & spinner $!
-	
+	$blacklistScript -f -nr -q > /dev/null & spinner $!
+
 	numBlacklisted=$(wc -l < "/etc/pihole/blacklist.txt")
 	plural=; [[ "$numBlacklisted" != "1" ]] && plural=s
   echo " $numBlacklisted domain${plural} blacklisted!"
-  
-	
+
+
 }
 
 
@@ -235,7 +247,7 @@ function gravity_Whitelist() {
 	# Prevent our sources from being pulled into the hole
 	plural=; [[ "${sources[@]}" != "1" ]] && plural=s
 	echo -n "::: Adding ${#sources[@]} ad list source${plural} to the whitelist..."
-	
+
 	urls=()
 	for url in ${sources[@]}
 	do
@@ -243,16 +255,16 @@ function gravity_Whitelist() {
         urls=("${urls[@]}" $tmp)
 	done
 	echo " done!"
-	
+
 	echo -n "::: Running whitelist script to update HOSTS file...."
-	whitelist.sh -f -nr -q ${urls[@]} > /dev/null & spinner $!
-		
+	$whitelistScript -f -nr -q ${urls[@]} > /dev/null & spinner $!
+
 	numWhitelisted=$(wc -l < "/etc/pihole/whitelist.txt")
 	plural=; [[ "$numWhitelisted" != "1" ]] && plural=s
   echo " $numWhitelisted domain${plural} whitelisted!"
-  
-  
-		
+
+
+
 }
 
 function gravity_unique() {
@@ -272,7 +284,7 @@ function gravity_hostFormat() {
   	#Add dummy domain Pi-Hole.IsWorking.OK to the top of gravity.list to make ping result return a friendlier looking domain!
     echo -e "$piholeIP Pi-Hole.IsWorking.OK \n$piholeIPv6 Pi-Hole.IsWorking.OK" > $piholeDir/$accretionDisc
     cat $piholeDir/$eventHorizon | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $piholeDir/$accretionDisc
-    
+
   else
       # Otherwise, just create gravity.list as normal using IPv4
       #Add dummy domain Pi-Hole.IsWorking.OK to the top of gravity.list to make ping result return a friendlier looking domain!
@@ -307,20 +319,28 @@ function gravity_advanced() {
 	echo -n "::: Formatting list of domains to remove comments...."
 	awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' $piholeDir/$matterandlight | sed -nr -e 's/\.{2,}/./g' -e '/\./p' >  $piholeDir/$supernova & spinner $!
   echo " done!"
-  
+
 	numberOf=$(wc -l < $piholeDir/$supernova)
 	echo "::: $numberOf domains being pulled in by gravity..."
-    
+
 	gravity_unique
-  
+
 }
 
 function gravity_reload() {
+	#Clear no longer needed files...
+	echo ":::"
+	echo -n "::: Cleaning up un-needed files..."
+	$SUDO rm /etc/pihole/pihole.*
+	echo " done!"
+
 	# Reload hosts file
 	echo ":::"
 	echo -n "::: Refresh lists in dnsmasq..."
 	dnsmasqPid=$(pidof dnsmasq)
 
+    find "$piholeDir" -type f -exec $SUDO chmod 666 {} \; & spinner $!
+
 	if [[ $dnsmasqPid ]]; then
 		# service already running - reload config
 		$SUDO kill -HUP $dnsmasqPid & spinner $!