moving to functions

Also download the whitelist script.  Ask for donations for IPv6 support.
This commit is contained in:
Jacob Salmela 2015-11-08 17:21:02 -06:00 committed by dschaper
parent 46b4000e75
commit 76c217d9cc

View file

@ -29,9 +29,10 @@ IPv4mask=$(ifconfig | awk -F':' '/inet addr/ && !/127.0.0.1/ {print $4}')
IPv4gw=$(ip route show | awk '/default\ via/ {print $3}')
# IPv6 support to be added later
#IPv6addr=$(ip addr show | awk '/scope\ global/ && /ff:fe/ {print $2}' | cut -d'/' -f1)
#IPv6eui64=$(ip addr show | awk '/scope\ global/ && /ff:fe/ {print $2}' | cut -d'/' -f1)
#IPv6linkLocal=$(ip addr show | awk '/inet/ && /scope\ link/ && /fe80/ {print $2}' | cut -d'/' -f1)
ethernetDevice="eth0"
availableInterfaces=$(ip link show | awk -F' ' '/[0-9]: [a-z]/ {print $2}' | grep -v "lo" | cut -d':' -f1)
dhcpcdFile=/etc/dhcpcd.conf
####### FUCNTIONS ##########
@ -51,7 +52,113 @@ else
fi
}
set_static_ip()
welcomeDialogs()
{
# Display the welcome dialog
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
# Explain the need for a static address
whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
}
use4andor6()
{
# Let use select IPv4 and/or IPv6
cmd=(whiptail --separate-output --checklist "Select Protocols" $r $c 2)
options=(IPv4 "Block ads over IPv4" on
IPv6 "Block ads over IPv4" off)
choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty)
clear
for choice in $choices
do
case $choice in
IPv4)
echo "IPv4 selected."
useIPv4=true
;;
IPv6)
echo "IPv6 selected."
useIPv6=true
;;
esac
done
}
getStaticIPv4Settings()
{
# Ask if the user wannts to use DHCP settings as their static IP
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
IP address: $IPv4addr
Subnet mask: $IPv4mask
Gateway: $IPv4gw" $r $c) then
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
# Nothing else to do since the variables are already set above
else
# Otherwise, we need to ask the user to input their desired settings.
# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
until [[ $ipSettingsCorrect = True ]]
do
# Ask for the IPv4 address
IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 address: $IPv4addr"
# Ask for the subnet mask
IPv4mask=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 netmask" --inputbox "Enter your desired IPv4 subnet mask" $r $c $IPv4mask 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 netmask: $IPv4mask"
# Ask for the gateway
IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 gateway: $IPv4gw"
# Give the user a chance to review their settings before moving on
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
IP address: $IPv4addr
Subnet mask: $IPv4mask
Gateway: $IPv4gw" $r $c)then
# If the settings are correct, then we need to set the piholeIP
# Saving it to a temporary file us to retrieve it later when we run the gravity.sh script
echo $IPv4addr > /tmp/piholeIP
# After that's done, the loop ends and we move on
ipSettingsCorrect=True
else
# If the settings are wrong, the loop continues
ipSettingsCorrect=False
fi
else
# Cancelling gateway settings window
ipSettingsCorrect=False
echo "User canceled."
exit
fi
else
# Cancelling subnet mask settings window
ipSettingsCorrect=False
echo "User canceled."
exit
fi
else
# Cancelling IPv4 settings window
ipSettingsCorrect=False
echo "User canceled."
exit
fi
done
# End the if statement for DHCP vs. static
fi
}
setStaticIPv4()
{
# Append these lines to /etc/dhcpcd.conf to enable a static IP
echo "interface $ethernetDevice
@ -76,6 +183,7 @@ sudo service lighttpd stop
sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
sudo mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
sudo mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
sudo mv /etc/crontab /etc/crontab.orig
sudo curl -o /etc/dnsmasq.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf
sudo curl -o /etc/lighttpd/lighttpd.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf
sudo mv /etc/crontab /etc/crontab.orig
@ -92,94 +200,46 @@ sudo chmod 644 /var/log/pihole.log
sudo chown dnsmasq:root /var/log/pihole.log
sudo curl -o /usr/local/bin/gravity.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/installation/gravity.sh
sudo curl -o /usr/local/bin/chronometer.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh
sudo curl -o /usr/local/bin/whitelist.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/whitelist.sh
sudo chmod 755 /usr/local/bin/gravity.sh
sudo chmod 755 /usr/local/bin/chronometer.sh
sudo chmod 755 /usr/local/bin/whitelist.sh
sudo /usr/local/bin/gravity.sh
sudo service networking restart
}
######## SCRIPT ############
# Start the installer
welcomeDialogs
# Just back up the original Pi-hole right away since it won't take long and it gets it out of the way
backupLegacyPihole
# Display the welcome dialog
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
# Let the user decide if they want to block ads over IPv4 and/or IPv6
use4andor6
# Explain the need for a static address
whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
# Ask if the user wannts to use DHCP settings as their static IP
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
IP address: $IPv4addr
Subnet mask: $IPv4mask
Gateway: $IPv4gw" $r $c) then
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
# Nothing else to do since the variables are already set above
# Decide is IPv4 will be used
if [[ "$useIPv4" = true ]];then
echo "Using IPv4"
getStaticIPv4Settings
setStaticIPv4
else
# Otherwise, we need to ask the user to input their desired settings.
# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
until [[ $ipSettingsCorrect = True ]]
do
# Ask for the IPv4 address
IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 address: $IPv4addr"
# Ask for the subnet mask
IPv4mask=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 netmask" --inputbox "Enter your desired IPv4 subnet mask" $r $c $IPv4mask 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 netmask: $IPv4mask"
# Ask for the gateway
IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 gateway: $IPv4gw"
# Give the user a chance to review their settings before moving on
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
IP address: $IPv4addr
Subnet mask: $IPv4mask
Gateway: $IPv4gw" $r $c)then
# If the settings are correct, then we need to set the piholeIP
# Saving it to a temporary file us to retrieve it later when we run the gravity.sh script
echo $IPv4addr > /tmp/piholeIP
# After that's done, the loop ends and we move on
ipSettingsCorrect=True
else
# If the settings are wrong, the loop continues
ipSettingsCorrect=False
fi
else
# Cancelling gateway settings window
ipSettingsCorrect=False
echo "User canceled."
exit
fi
else
# Cancelling subnet mask settings window
ipSettingsCorrect=False
echo "User canceled."
exit
fi
else
# Cancelling IPv4 settings window
ipSettingsCorrect=False
echo "User canceled."
exit
fi
done
# End the if statement for DHCP vs. static
echo "IPv4 will NOT be used."
fi
# Decide is IPv6 will be used
if [[ "$useIPv6" = true ]];then
whiptail --msgbox --backtitle "Coming soon..." --title "IPv6 not yet supported" "I need your help. Consider donating at:
http://pi-hole.net/donate" $r $c
echo "Using IPv6"
else
whiptail --msgbox --backtitle "Coming soon..." --title "IPv6 not yet supported" "I need your help. Consider donating at:
http://pi-hole.net/donate" $r $c
echo "IPv6 will NOT be used."
fi
# Set the static address
set_static_ip
# Install and log everything to a file
installPihole | tee $tmpLog