Merge branch 'development-v6' into new/migrate_dnsmasq_conf

.github/workflows/codeql-analysis.yml

@@ -25,7 +25,7 @@ jobs:
     steps:
     -
       name: Checkout repository
-      uses: actions/checkout@v4.1.1
+      uses: actions/checkout@v4.1.5
     # Initializes the CodeQL tools for scanning.
     -
       name: Initialize CodeQL

.github/workflows/merge-conflict.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check if PRs are have merge conflicts
-        uses: eps1lon/actions-label-merge-conflict@v2.1.0
+        uses: eps1lon/actions-label-merge-conflict@v3.0.1
         with:
           dirtyLabel: "PR: Merge Conflict"
           repoToken: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/stale.yml

@@ -40,7 +40,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Remove 'stale' label
         run: gh issue edit ${{ github.event.issue.number }} --remove-label ${{ env.stale_label }}
         env:

.github/workflows/sync-back-to-dev.yml

@@ -33,7 +33,7 @@ jobs:
     name: Syncing branches
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Opening pull request
         run: gh pr create -B development -H master --title 'Sync master back into development' --body 'Created by Github action' --label 'internal'
         env:

.github/workflows/test.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
 
       - name: Check scripts in repository are executable
         run: |
@@ -62,19 +62,20 @@ jobs:
             ubuntu_20,
             ubuntu_22,
             ubuntu_23,
+            ubuntu_24,
             centos_8,
             centos_9,
-             fedora_38,
             fedora_39,
+            fedora_40,
           ]
     env:
       DISTRO: ${{matrix.distro}}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
 
       - name: Set up Python 3.10
-        uses: actions/setup-python@v5.0.0
+        uses: actions/setup-python@v5.1.0
         with:
           python-version: "3.10"
 

advanced/Scripts/piholeDebug.sh

@@ -865,8 +865,6 @@ make_array_from_file() {
     local limit=${2}
     # A local iterator for testing if we are at the limit above
     local i=0
-    # Set the array to be empty so we can start fresh when the function is used
-    local file_content=()
     # If the file is a directory
     if [[ -d "${filename}" ]]; then
         # do nothing since it cannot be parsed
@@ -878,11 +876,14 @@ make_array_from_file() {
             new_line=$(echo "${line}" | sed -e 's/^\s*#.*$//' -e '/^$/d')
             # If the line still has content (a non-zero value)
             if [[ -n "${new_line}" ]]; then
-                # Put it into the array
-                file_content+=("${new_line}")
-            else
-                # Otherwise, it's a blank line or comment, so do nothing
-                :
+
+                # If the string contains "### CHANGED", highlight this part in red
+                if [[ "${new_line}" == *"### CHANGED"* ]]; then
+                    new_line="${new_line//### CHANGED/${COL_RED}### CHANGED${COL_NC}}"
+                fi
+
+                # Finally, write this line to the log
+                log_write "   ${new_line}"
             fi
             # Increment the iterator +1
             i=$((i+1))
@@ -894,12 +895,6 @@ make_array_from_file() {
                 break
             fi
         done < "${filename}"
-        # Now the we have made an array of the file's content
-        for each_line in "${file_content[@]}"; do
-            # Print each line
-            # At some point, we may want to check the file line-by-line, so that's the reason for an array
-            log_write "   ${each_line}"
-        done
     fi
 }
 

advanced/Scripts/query.sh

@@ -41,14 +41,14 @@ Options:
 
 GenerateOutput() {
     local data gravity_data lists_data num_gravity num_lists search_type_str
-    local gravity_data_csv lists_data_csv line current_domain
+    local gravity_data_csv lists_data_csv line current_domain url type color
     data="${1}"
 
     # construct a new json for the list results where each object contains the domain and the related type
     lists_data=$(printf %s "${data}" | jq '.search.domains | [.[] | {domain: .domain, type: .type}]')
 
     # construct a new json for the gravity results where each object contains the adlist URL and the related domains
-    gravity_data=$(printf %s "${data}" | jq '.search.gravity  | group_by(.address) | map({ address: (.[0].address), domains: [.[] | .domain] })')
+    gravity_data=$(printf %s "${data}" | jq '.search.gravity  | group_by(.address,.type) | map({ address: (.[0].address), type: (.[0].type), domains: [.[] | .domain] })')
 
     # number of objects in each json
     num_gravity=$(printf %s "${gravity_data}" | jq length)
@@ -78,15 +78,27 @@ GenerateOutput() {
     if [ "${num_gravity}" -gt 0 ]; then
         # Convert the data to a csv, each line is a "URL,domain,domain,...." string
         # not using jq's @csv here as it quotes each value individually
-        gravity_data_csv=$(printf %s "${gravity_data}" | jq --raw-output '.[] | [.address, .domains[]] | join(",")')
+        gravity_data_csv=$(printf %s "${gravity_data}" | jq --raw-output '.[] | [.address, .type, .domains[]] | join(",")')
 
         # Generate line-by-line output for each csv line
         echo "${gravity_data_csv}" | while read -r line; do
+            # Get first part of the line, the URL
+            url=${line%%,*}
+
+            # cut off URL, leaving "type,domain,domain,...."
+            line=${line#*,}
+            type=${line%%,*}
+            # type == "block" -> red, type == "allow" -> green
+            if [ "${type}" = "block" ]; then
+                color="${COL_RED}"
+            else
+                color="${COL_GREEN}"
+            fi
 
             # print adlist URL
-            printf "%s\n\n" "  - ${COL_BLUE}${line%%,*}${COL_NC}"
+            printf "%s (%s)\n\n" "  - ${COL_BLUE}${url}${COL_NC}" "${color}${type}${COL_NC}"
 
-            # cut off URL, leaving "domain,domain,...."
+            # cut off type, leaving "domain,domain,...."
             line=${line#*,}
             # print each domain and remove it from the string until nothing is left
             while [ ${#line} -gt 0 ]; do

advanced/Templates/gravity.db.sql

@@ -27,7 +27,7 @@ CREATE TABLE domainlist
 CREATE TABLE adlist
 (
 	id INTEGER PRIMARY KEY AUTOINCREMENT,
-	address TEXT UNIQUE NOT NULL,
+	address TEXT NOT NULL,
 	enabled BOOLEAN NOT NULL DEFAULT 1,
 	date_added INTEGER NOT NULL DEFAULT (cast(strftime('%s', 'now') as int)),
 	date_modified INTEGER NOT NULL DEFAULT (cast(strftime('%s', 'now') as int)),
@@ -37,7 +37,8 @@ CREATE TABLE adlist
 	invalid_domains INTEGER NOT NULL DEFAULT 0,
 	status INTEGER NOT NULL DEFAULT 0,
 	abp_entries INTEGER NOT NULL DEFAULT 0,
-	type INTEGER NOT NULL DEFAULT 0
+	type INTEGER NOT NULL DEFAULT 0,
+	UNIQUE(address, type)
 );
 
 CREATE TABLE adlist_by_group

automated install/basic-install.sh

@@ -826,12 +826,12 @@ If you want to specify a port other than 53, separate it with a hash.\
             printf -v PIHOLE_DNS_1 "%s" "${piholeDNS%%,*}"
             printf -v PIHOLE_DNS_2 "%s" "${piholeDNS##*,}"
 
-            # If the first DNS value is invalid or empty, this if statement will be true and we will set PIHOLE_DNS_1="Invalid"
-            if ! valid_ip "${PIHOLE_DNS_1}" || [[ ! "${PIHOLE_DNS_1}" ]]; then
+            # If the first DNS value is invalid (neither IPv4 nor IPv6) or empty, set PIHOLE_DNS_1="Invalid"
+            if ! valid_ip "${PIHOLE_DNS_1}" && ! valid_ip6 "${PIHOLE_DNS_1}" || [[ -z "${PIHOLE_DNS_1}" ]]; then
                 PIHOLE_DNS_1=${strInvalid}
             fi
-            # If the second DNS value is invalid or empty, this if statement will be true and we will set PIHOLE_DNS_2="Invalid"
-            if ! valid_ip "${PIHOLE_DNS_2}" && [[ "${PIHOLE_DNS_2}" ]]; then
+            # If the second DNS value is invalid but not empty, set PIHOLE_DNS_2="Invalid"
+            if ! valid_ip "${PIHOLE_DNS_2}" && ! valid_ip6 "${PIHOLE_DNS_2}" && [[ -n "${PIHOLE_DNS_2}" ]]; then
                 PIHOLE_DNS_2=${strInvalid}
             fi
             # If either of the DNS servers are invalid,
@@ -2005,9 +2005,11 @@ FTLcheckUpdate() {
     local localSha1
 
     if [[ ! "${ftlBranch}" == "master" ]]; then
-        # Check whether or not the binary for this FTL branch actually exists. If not, then there is no update!
+        # This is not the master branch
         local path
         path="${ftlBranch}/${binary}"
+
+        # Check whether or not the binary for this FTL branch actually exists. If not, then there is no update!
         # shellcheck disable=SC1090
         check_download_exists "$path"
         local ret=$?
@@ -2026,23 +2028,22 @@ FTLcheckUpdate() {
         fi
 
         if [[ ${ftlLoc} ]]; then
-            # We already have a pihole-FTL binary downloaded.
-            # Alt branches don't have a tagged version against them, so just confirm the checksum of the local vs remote to decide whether we download or not
-            remoteSha1=$(curl -sSL --fail "https://ftl.pi-hole.net/${ftlBranch}/${binary}.sha1" | cut -d ' ' -f 1)
-            localSha1=$(sha1sum "$(command -v pihole-FTL)" | cut -d ' ' -f 1)
-
-            if [[ "${remoteSha1}" != "${localSha1}" ]]; then
-                printf "  %b Checksums do not match, downloading from ftl.pi-hole.net.\\n" "${INFO}"
-                return 0
-            else
-                printf "  %b Checksum of installed binary matches remote. No need to download!\\n" "${INFO}"
-                return 1
-            fi
+            # We already have a pihole-FTL binary installed, check if it's the
+            # same as the remote one
+            # Alt branches don't have a tagged version against them, so just
+            # confirm the checksum of the local vs remote to decide whether we
+            # download or not
+            printf "  %b FTL binary already installed, verifying integrity...\\n" "${INFO}"
+            checkSumFile="https://ftl.pi-hole.net/${ftlBranch}/${binary}.sha1"
+            # Continue further down...
         else
             return 0
         fi
     else
+        # This is the master branch
         if [[ ${ftlLoc} ]]; then
+            # We already have a pihole-FTL binary installed, check if it's the
+            # same as the remote one
             local FTLversion
             FTLversion=$(/usr/bin/pihole-FTL tag)
             local FTLlatesttag
@@ -2056,25 +2057,39 @@ FTLcheckUpdate() {
 
             # Check if the installed version matches the latest version
             if [[ "${FTLversion}" != "${FTLlatesttag}" ]]; then
+                # If the installed version does not match the latest version,
+                # then download
                 return 0
             else
-                printf "  %b Latest FTL Binary already installed (%s). Confirming Checksum...\\n" "${INFO}" "${FTLlatesttag}"
-
-                remoteSha1=$(curl -sSL --fail "https://github.com/pi-hole/FTL/releases/download/${FTLversion%$'\r'}/${binary}.sha1" | cut -d ' ' -f 1)
-                localSha1=$(sha1sum "$(command -v pihole-FTL)" | cut -d ' ' -f 1)
-
-                if [[ "${remoteSha1}" != "${localSha1}" ]]; then
-                    printf "  %b Corruption detected...\\n" "${INFO}"
-                    return 0
-                else
-                    printf "  %b Checksum correct. No need to download!\\n" "${INFO}"
-                    return 1
-                fi
+                # If the installed version matches the latest version, then
+                # check the installed sha1sum of the binary vs the remote
+                # sha1sum. If they do not match, then download
+                printf "  %b Latest FTL binary already installed (%s), verifying integrity...\\n" "${INFO}" "${FTLlatesttag}"
+                checkSumFile="https://github.com/pi-hole/FTL/releases/download/${FTLversion%$'\r'}/${binary}.sha1"
+                # Continue further down...
             fi
         else
             return 0
         fi
     fi
+
+    # If we reach this point, we need to check the checksum of the local vs
+    # remote to decide whether we download or not
+    remoteSha1=$(curl -sSL --fail "${checkSumFile}" | cut -d ' ' -f 1)
+    localSha1=$(sha1sum "${ftlLoc}" | cut -d ' ' -f 1)
+
+    # Check we downloaded a valid checksum (no 404 or other error like
+    # no DNS resolution)
+    if [[ ! "${remoteSha1}" =~ ^[a-f0-9]{40}$ ]]; then
+        printf "  %b Remote checksum not available, trying to redownload...\\n" "${CROSS}"
+        return 0
+    elif [[ "${remoteSha1}" != "${localSha1}" ]]; then
+        printf "  %b Remote binary is different, downloading...\\n" "${CROSS}"
+        return 0
+    fi
+
+    printf "  %b Local binary up-to-date. No need to download!\\n" "${INFO}"
+    return 1
 }
 
 # Detect suitable FTL binary platform

gravity.sh

@@ -54,6 +54,7 @@ fi
 # Set this only after sourcing pihole-FTL.conf as the gravity database path may
 # have changed
 gravityDBfile="${GRAVITYDB}"
+gravityDBfile_default="/etc/pihole/gravity.db"
 gravityTEMPfile="${GRAVITYDB}_temp"
 gravityDIR="$(dirname -- "${gravityDBfile}")"
 gravityOLDfile="${gravityDIR}/gravity_old.db"
@@ -94,7 +95,7 @@ gravity_swap_databases() {
   # Number of available blocks on disk
   availableBlocks=$(stat -f --format "%a" "${gravityDIR}")
   # Number of blocks, used by gravity.db
-  gravityBlocks=$(stat --format "%b" ${gravityDBfile})
+  gravityBlocks=$(stat --format "%b" "${gravityDBfile}")
   # Only keep the old database if available disk space is at least twice the size of the existing gravity.db.
   # Better be safe than sorry...
   oldAvail=false
@@ -453,7 +454,7 @@ gravity_DownloadBlocklists() {
     if [[ "${check_url}" =~ ${regex} ]]; then
       echo -e "  ${CROSS} Invalid Target"
     else
-      gravity_DownloadBlocklistFromUrl "${url}" "${sourceIDs[$i]}" "${saveLocation}" "${target}" "${compression}" "${adlist_type}"
+      gravity_DownloadBlocklistFromUrl "${url}" "${sourceIDs[$i]}" "${saveLocation}" "${target}" "${compression}" "${adlist_type}" "${domain}"
     fi
     echo ""
   done
@@ -485,8 +486,9 @@ compareLists() {
 
 # Download specified URL and perform checks on HTTP status and file content
 gravity_DownloadBlocklistFromUrl() {
-  local url="${1}" adlistID="${2}" saveLocation="${3}" target="${4}" compression="${5}" gravity_type="${6}"
+  local url="${1}" adlistID="${2}" saveLocation="${3}" target="${4}" compression="${5}" gravity_type="${6}" domain="${7}"
   local heisenbergCompensator="" listCurlBuffer str httpCode success="" ip cmd_ext
+  local file_path permissions ip_addr port blocked=false download=true
 
   # Create temp file to store content on disk instead of RAM
   # We don't use '--suffix' here because not all implementations of mktemp support it, e.g. on Alpine
@@ -531,27 +533,99 @@ gravity_DownloadBlocklistFromUrl() {
     ;;
   esac
 
-  if [[ "${blocked}" == true ]]; then
-    printf -v ip_addr "%s" "${PIHOLE_DNS_1%#*}"
-    if [[ ${PIHOLE_DNS_1} != *"#"* ]]; then
-      port=53
-    else
-      printf -v port "%s" "${PIHOLE_DNS_1#*#}"
+  # Check if this domain is blocked by Pi-hole but only if the domain is not a
+  # local file or empty
+  if [[ $url != "file"* ]] && [[ -n "${domain}" ]]; then
+    case $(getFTLConfigValue dns.blocking.mode) in
+    "IP-NODATA-AAAA" | "IP")
+      # Get IP address of this domain
+      ip="$(dig "${domain}" +short)"
+      # Check if this IP matches any IP of the system
+      if [[ -n "${ip}" && $(grep -Ec "inet(|6) ${ip}" <<<"$(ip a)") -gt 0 ]]; then
+        blocked=true
+      fi
+      ;;
+    "NXDOMAIN")
+      if [[ $(dig "${domain}" | grep "NXDOMAIN" -c) -ge 1 ]]; then
+        blocked=true
+      fi
+      ;;
+    "NODATA")
+      if [[ $(dig "${domain}" | grep "NOERROR" -c) -ge 1 ]] && [[ -z $(dig +short "${domain}") ]]; then
+        blocked=true
+      fi
+      ;;
+    "NULL" | *)
+      if [[ $(dig "${domain}" +short | grep "0.0.0.0" -c) -ge 1 ]]; then
+        blocked=true
+      fi
+      ;;
+    esac
+
+    if [[ "${blocked}" == true ]]; then
+      # Get first defined upstream server
+      local upstream
+      upstream="$(getFTLConfigValue dns.upstreams)"
+
+      # Isolate first upstream server from a string like
+      # [ 1.2.3.4#1234, 5.6.7.8#5678, ... ]
+      upstream="${upstream%%,*}"
+      upstream="${upstream##*[}"
+      upstream="${upstream%%]*}"
+      # Trim leading and trailing spaces and tabs
+      upstream="${upstream#"${upstream%%[![:space:]]*}"}"
+      upstream="${upstream%"${upstream##*[![:space:]]}"}"
+
+      # Get IP address and port of this upstream server
+      local ip_addr port
+      printf -v ip_addr "%s" "${upstream%#*}"
+      if [[ ${upstream} != *"#"* ]]; then
+        port=53
+      else
+        printf -v port "%s" "${upstream#*#}"
+      fi
+      ip=$(dig "@${ip_addr}" -p "${port}" +short "${domain}" | tail -1)
+      if [[ $(echo "${url}" | awk -F '://' '{print $1}') = "https" ]]; then
+        port=443
+      else
+        port=80
+      fi
+      echo -e "${OVER}  ${CROSS} ${str} ${domain} is blocked by one of your lists. Using DNS server ${upstream} instead"
+      echo -ne "  ${INFO} ${str} Pending..."
+      cmd_ext="--resolve $domain:$port:$ip"
     fi
-    ip=$(dig "@${ip_addr}" -p "${port}" +short "${domain}" | tail -1)
-    if [[ $(echo "${url}" | awk -F '://' '{print $1}') = "https" ]]; then
-      port=443
-    else
-      port=80
-    fi
-    bad_list=$(pihole -q -adlist "${domain}" | head -n1 | awk -F 'Match found in ' '{print $2}')
-    echo -e "${OVER}  ${CROSS} ${str} ${domain} is blocked by ${bad_list%:}. Using DNS on ${PIHOLE_DNS_1} to download ${url}"
-    echo -ne "  ${INFO} ${str} Pending..."
-    cmd_ext="--resolve $domain:$port:$ip"
   fi
 
-  # shellcheck disable=SC2086
-  httpCode=$(curl --connect-timeout ${curl_connect_timeout} -s -L ${compression} ${cmd_ext} ${heisenbergCompensator} -w "%{http_code}" "${url}" -o "${listCurlBuffer}" 2>/dev/null)
+  # If we are going to "download" a local file, we first check if the target
+  # file has a+r permission. We explicitly check for all+read because we want
+  # to make sure that the file is readable by everyone and not just the user
+  # running the script.
+  if [[ $url == "file://"* ]]; then
+    # Get the file path
+    file_path=$(echo "$url" | cut -d'/' -f3-)
+    # Check if the file exists and is a regular file (i.e. not a socket, fifo, tty, block). Might still be a symlink.
+    if [[ ! -f $file_path ]]; then
+      # Output that the file does not exist
+      echo -e "${OVER}  ${CROSS} ${file_path} does not exist"
+      download=false
+    else
+      # Check if the file or a file referenced by the symlink has a+r permissions
+      permissions=$(stat -L -c "%a" "$file_path")
+      if [[ $permissions == *4 || $permissions == *5 || $permissions == *6 || $permissions == *7 ]]; then
+        # Output that we are using the local file
+        echo -e "${OVER}  ${INFO} Using local file ${file_path}"
+      else
+        # Output that the file does not have the correct permissions
+        echo -e "${OVER}  ${CROSS} Cannot read file (file needs to have a+r permission)"
+        download=false
+      fi
+    fi
+  fi
+
+  if [[ "${download}" == true ]]; then
+    # shellcheck disable=SC2086
+    httpCode=$(curl --connect-timeout ${curl_connect_timeout} -s -L ${compression} ${cmd_ext} ${heisenbergCompensator} -w "%{http_code}" "${url}" -o "${listCurlBuffer}" 2>/dev/null)
+  fi
 
   case $url in
   # Did we "download" a local file?
@@ -560,7 +634,7 @@ gravity_DownloadBlocklistFromUrl() {
       echo -e "${OVER}  ${TICK} ${str} Retrieval successful"
       success=true
     else
-      echo -e "${OVER}  ${CROSS} ${str} Not found / empty list"
+      echo -e "${OVER}  ${CROSS} ${str} Retrieval failed / empty list"
     fi
     ;;
   # Did we "download" a remote file?
@@ -594,7 +668,7 @@ gravity_DownloadBlocklistFromUrl() {
   if [[ "${success}" == true ]]; then
     if [[ "${httpCode}" == "304" ]]; then
       # Add domains to database table file
-      pihole-FTL ${gravity_type} parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
+      pihole-FTL "${gravity_type}" parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
       database_adlist_status "${adlistID}" "2"
       done="true"
     # Check if $listCurlBuffer is a non-zero length file
@@ -604,7 +678,7 @@ gravity_DownloadBlocklistFromUrl() {
       # Remove curl buffer file after its use
       rm "${listCurlBuffer}"
       # Add domains to database table file
-      pihole-FTL ${gravity_type} parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
+      pihole-FTL "${gravity_type}" parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
       # Compare lists, are they identical?
       compareLists "${adlistID}" "${saveLocation}"
       done="true"
@@ -620,7 +694,7 @@ gravity_DownloadBlocklistFromUrl() {
     if [[ -r "${saveLocation}" ]]; then
       echo -e "  ${CROSS} List download failed: ${COL_LIGHT_GREEN}using previously cached list${COL_NC}"
       # Add domains to database table file
-      pihole-FTL ${gravity_type} parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
+      pihole-FTL "${gravity_type}" parseList "${saveLocation}" "${gravityTEMPfile}" "${adlistID}"
       database_adlist_status "${adlistID}" "3"
     else
       echo -e "  ${CROSS} List download failed: ${COL_LIGHT_RED}no cached list available${COL_NC}"
@@ -824,10 +898,13 @@ Available options:
 
 for var in "$@"; do
   case "${var}" in
-  "-f" | "--force" ) forceDelete=true;;
-  "-r" | "--repair" ) repairSelector "$3";;
-  "-u" | "--upgrade" ) upgrade_gravityDB "${gravityDBfile}" "${piholeDir}"; exit 0;;
-  "-h" | "--help" ) helpFunc;;
+  "-f" | "--force") forceDelete=true ;;
+  "-r" | "--repair") repairSelector "$3" ;;
+  "-u" | "--upgrade")
+    upgrade_gravityDB "${gravityDBfile}" "${piholeDir}"
+    exit 0
+    ;;
+  "-h" | "--help") helpFunc ;;
   esac
 done
 

test/_fedora_40.Dockerfile

@@ -1,4 +1,4 @@
-FROM fedora:38
+FROM fedora:40
 RUN dnf install -y git initscripts
 
 ENV GITDIR /etc/.pihole

test/_ubuntu_24.Dockerfile

@@ -0,0 +1,18 @@
+FROM buildpack-deps:24.04-scm
+
+ENV GITDIR /etc/.pihole
+ENV SCRIPTDIR /opt/pihole
+
+RUN mkdir -p $GITDIR $SCRIPTDIR /etc/pihole
+ADD . $GITDIR
+RUN cp $GITDIR/advanced/Scripts/*.sh $GITDIR/gravity.sh $GITDIR/pihole $GITDIR/automated\ install/*.sh $SCRIPTDIR/
+ENV PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$SCRIPTDIR
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN true && \
+    chmod +x $SCRIPTDIR/*
+
+ENV SKIP_INSTALL true
+ENV OS_CHECK_DOMAIN_NAME dev-supportedos.pi-hole.net
+
+#sed '/# Start the installer/Q' /opt/pihole/basic-install.sh > /opt/pihole/stub_basic-install.sh && \

test/requirements.txt

@@ -1,6 +1,6 @@
 pyyaml == 6.0.1
-pytest == 8.0.0
-pytest-xdist == 3.5.0
-pytest-testinfra == 10.0.0
-tox == 4.12.1
+pytest == 8.2.0
+pytest-xdist == 3.6.1
+pytest-testinfra == 10.1.0
+tox == 4.15.0
 

test/tox.fedora_40.ini

@@ -4,5 +4,5 @@ envlist = py3
 [testenv]
 allowlist_externals = docker
 deps = -rrequirements.txt
-commands = docker buildx build --load --progress plain -f _fedora_38.Dockerfile -t pytest_pihole:test_container ../
+commands = docker buildx build --load --progress plain -f _fedora_40.Dockerfile -t pytest_pihole:test_container ../
            pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py ./test_centos_fedora_common_support.py

test/tox.ubuntu_24.ini

@@ -0,0 +1,8 @@
+[tox]
+envlist = py3
+
+[testenv:py3]
+allowlist_externals = docker
+deps = -rrequirements.txt
+commands = docker buildx build --load --progress plain -f _ubuntu_24.Dockerfile -t pytest_pihole:test_container ../
+           pytest {posargs:-vv -n auto} ./test_any_automated_install.py ./test_any_utils.py