Merge pull request #2938 from pi-hole/release/v4.3.2

Release v4.3.2 merge to development for update.

advanced/Scripts/query.sh

@@ -183,6 +183,20 @@ lists=("$(cd "$piholeDir" || exit 0; printf "%s\\n" -- *.domains | sort -V)")
 # Query blocklists for occurences of domain
 mapfile -t results <<< "$(scanList "${domainQuery}" "${lists[*]}" "${exact}")"
 
+# Remove unwanted content from $results
+# Each line in $results is formatted as such: [fileName]:[line]
+# 1. Delete lines starting with #
+# 2. Remove comments after domain
+# 3. Remove hosts format IP address
+# 4. Remove any lines that no longer contain the queried domain name (in case the matched domain name was in a comment)
+esc_domain="${domainQuery//./\\.}"
+mapfile -t results <<< "$(IFS=$'\n'; sed \
+	-e "/:#/d" \
+	-e "s/[ \\t]#.*//g" \
+	-e "s/:.*[ \\t]/:/g" \
+	-e "/${esc_domain}/!d" \
+	<<< "${results[*]}")"
+
 # Handle notices
 if [[ -z "${wbMatch:-}" ]] && [[ -z "${wcMatch:-}" ]] && [[ -z "${results[*]}" ]]; then
     echo -e "  ${INFO} No ${exact/t/t }results found for ${COL_BOLD}${domainQuery}${COL_NC} within the block lists"
@@ -196,20 +210,6 @@ elif [[ -z "${all}" ]] && [[ "${#results[*]}" -ge 100 ]]; then
     exit 0
 fi
 
-# Remove unwanted content from non-exact $results
-if [[ -z "${exact}" ]]; then
-    # Delete lines starting with #
-    # Remove comments after domain
-    # Remove hosts format IP address
-    mapfile -t results <<< "$(IFS=$'\n'; sed \
-        -e "/:#/d" \
-        -e "s/[ \\t]#.*//g" \
-        -e "s/:.*[ \\t]/:/g" \
-        <<< "${results[*]}")"
-    # Exit if result was in a comment
-    [[ -z "${results[*]}" ]] && exit 0
-fi
-
 # Get adlist file content as array
 if [[ -n "${adlist}" ]] || [[ -n "${blockpage}" ]]; then
     # Retrieve source URLs from gravity database

advanced/Scripts/webpage.sh

@@ -16,6 +16,7 @@ readonly dhcpconfig="/etc/dnsmasq.d/02-pihole-dhcp.conf"
 readonly FTLconf="/etc/pihole/pihole-FTL.conf"
 # 03 -> wildcards
 readonly dhcpstaticconfig="/etc/dnsmasq.d/04-pihole-static-dhcp.conf"
+readonly PI_HOLE_BIN_DIR="/usr/local/bin"
 
 readonly gravityDBfile="/etc/pihole/gravity.db"
 
@@ -281,7 +282,7 @@ Reboot() {
 }
 
 RestartDNS() {
-    /usr/local/bin/pihole restartdns
+    "${PI_HOLE_BIN_DIR}"/pihole restartdns
 }
 
 SetQueryLogOptions() {

automated install/basic-install.sh

@@ -65,6 +65,7 @@ PI_HOLE_FILES=(chronometer list piholeDebug piholeLogFlush setupLCD update versi
 # This directory is where the Pi-hole scripts will be installed
 PI_HOLE_INSTALL_DIR="/opt/pihole"
 PI_HOLE_CONFIG_DIR="/etc/pihole"
+PI_HOLE_BIN_DIR="/usr/local/bin"
 PI_HOLE_BLOCKPAGE_DIR="${webroot}/pihole"
 useUpdateVars=false
 
@@ -1351,7 +1352,7 @@ installScripts() {
         install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/*.sh
         install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./automated\ install/uninstall.sh
         install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/COL_TABLE
-        install -o "${USER}" -Dm755 -t /usr/local/bin/ pihole
+        install -o "${USER}" -Dm755 -t "${PI_HOLE_BIN_DIR}" pihole
         install -Dm644 ./advanced/bash-completion/pihole /etc/bash_completion.d/pihole
         printf "%b  %b %s\\n" "${OVER}" "${TICK}" "${str}"
 
@@ -1704,13 +1705,13 @@ installPiholeWeb() {
     # and copy in the pihole sudoers file
     install -m 0640 ${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole.sudo /etc/sudoers.d/pihole
     # Add lighttpd user (OS dependent) to sudoers file
-    echo "${LIGHTTPD_USER} ALL=NOPASSWD: /usr/local/bin/pihole" >> /etc/sudoers.d/pihole
+    echo "${LIGHTTPD_USER} ALL=NOPASSWD: ${PI_HOLE_BIN_DIR}/pihole" >> /etc/sudoers.d/pihole
 
     # If the Web server user is lighttpd,
     if [[ "$LIGHTTPD_USER" == "lighttpd" ]]; then
         # Allow executing pihole via sudo with Fedora
-        # Usually /usr/local/bin is not permitted as directory for sudoable programs
+        # Usually /usr/local/bin ${PI_HOLE_BIN_DIR} is not permitted as directory for sudoable programs
-        echo "Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin" >> /etc/sudoers.d/pihole
+        echo "Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin:${PI_HOLE_BIN_DIR}" >> /etc/sudoers.d/pihole
     fi
     # Set the strict permissions on the file
     chmod 0440 /etc/sudoers.d/pihole
@@ -2413,7 +2414,7 @@ FTLcheckUpdate() {
                 return 3
             fi
 
-            FTLlatesttag=$(grep 'Location' < "${FTLreleaseData}" | awk -F '/' '{print $NF}' | tr -d '\r\n')
+            FTLlatesttag=$(grep 'Location' <<< "${FTLreleaseData}" | awk -F '/' '{print $NF}' | tr -d '\r\n')
 
             if [[ "${FTLversion}" != "${FTLlatesttag}" ]]; then
                 return 0
@@ -2699,7 +2700,7 @@ main() {
 
     if [[ "${INSTALL_TYPE}" == "Update" ]]; then
         printf "\\n"
-        /usr/local/bin/pihole version --current
+        "${PI_HOLE_BIN_DIR}"/pihole version --current
     fi
 }
 

gravity.sh

@@ -458,48 +458,7 @@ gravity_ParseFileIntoDomains() {
   # Determine how to parse individual source file formats
   if [[ "${firstLine,,}" =~ (adblock|ublock|^!) ]]; then
     # Compare $firstLine against lower case words found in Adblock lists
-    echo -ne "  ${INFO} Format: Adblock"
+    echo -e "  ${CROSS} Format: Adblock (list type not supported)"
-
-    # Define symbols used as comments: [!
-    # "||.*^" includes the "Example 2" domains we can extract
-    # https://adblockplus.org/filter-cheatsheet
-    abpFilter="/^(\\[|!)|^(\\|\\|.*\\^)/"
-
-    # Parse Adblock lists by extracting "Example 2" domains
-    # Logic: Ignore lines which do not include comments or domain name anchor
-    awk ''"${abpFilter}"' {
-      # Remove valid adblock type options
-      gsub(/\$?~?(important|third-party|popup|subdocument|websocket),?/, "", $0)
-      # Remove starting domain name anchor "||" and ending seperator "^"
-      gsub(/^(\|\|)|(\^)/, "", $0)
-      # Remove invalid characters (*/,=$)
-      if($0 ~ /[*\/,=\$]/) { $0="" }
-      # Remove lines which are only IPv4 addresses
-      if($0 ~ /^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$/) { $0="" }
-      if($0) { print $0 }
-    }' "${source}" > "${destination}"
-    chmod 644 "${destination}"
-
-    # Determine if there are Adblock exception rules
-    # https://adblockplus.org/filters
-    if grep -q "^@@||" "${source}" &> /dev/null; then
-      # Parse Adblock lists by extracting exception rules
-      # Logic: Ignore lines which do not include exception format "@@||example.com^"
-      awk -F "[|^]" '/^@@\|\|.*\^/ {
-        # Remove valid adblock type options
-        gsub(/\$?~?(third-party)/, "", $0)
-        # Remove invalid characters (*/,=$)
-        if($0 ~ /[*\/,=\$]/) { $0="" }
-        if($3) { print $3 }
-      }' "${source}" > "${destination}.exceptionsFile.tmp"
-
-      # Remove exceptions
-      comm -23 "${destination}" <(sort "${destination}.exceptionsFile.tmp") > "${source}"
-      mv "${source}" "${destination}"
-      chmod 644 "${destination}"
-    fi
-
-    echo -e "${OVER}  ${TICK} Format: Adblock"
   elif grep -q "^address=/" "${source}" &> /dev/null; then
     # Parse Dnsmasq format lists
     echo -e "  ${CROSS} Format: Dnsmasq (list type not supported)"

pihole

@@ -11,10 +11,11 @@
 
 readonly PI_HOLE_SCRIPT_DIR="/opt/pihole"
 
-# setupVars is not readonly here because in some functions (checkout),
+# setupVars and PI_HOLE_BIN_DIR are not readonly here because in some funcitons (checkout),
 # it might get set again when the installer is sourced. This causes an
 # error due to modifying a readonly variable.
 setupVars="/etc/pihole/setupVars.conf"
+PI_HOLE_BIN_DIR="/usr/local/bin"
 
 readonly colfile="${PI_HOLE_SCRIPT_DIR}/COL_TABLE"
 source "${colfile}"
@@ -101,20 +102,16 @@ versionFunc() {
 
 restartDNS() {
   local svcOption svc str output status
-  svcOption="${1:-}"
+  svcOption="${1:-restart}"
 
-  # Determine if we should reload or restart restart
+  # Determine if we should reload or restart
   if [[ "${svcOption}" =~ "reload" ]]; then
-    # Using SIGHUP will NOT re-read any *.conf files
+    # Reload has been requested
+    # Note: This will NOT re-read any *.conf files
     svc="killall -s SIGHUP ${resolver}"
   else
-    # Get PID of resolver to determine if it needs to start or restart
+    # A full restart has been requested
-    if pidof pihole-FTL &> /dev/null; then
+    svc="service ${resolver} restart"
-      svcOption="restart"
-    else
-      svcOption="start"
-    fi
-    svc="service ${resolver} ${svcOption}"
   fi
 
   # Print output to Terminal, but not to Web Admin
@@ -159,7 +156,7 @@ Time:
           local str="Disabling blocking for ${tt} seconds"
           echo -e "  ${INFO} ${str}..."
           local str="Blocking will be re-enabled in ${tt} seconds"
-          nohup bash -c "sleep ${tt}; pihole enable" </dev/null &>/dev/null &
+          nohup bash -c "sleep ${tt}; ${PI_HOLE_BIN_DIR}/pihole enable" </dev/null &>/dev/null &
         else
           local error=true
         fi
@@ -170,7 +167,7 @@ Time:
           echo -e "  ${INFO} ${str}..."
           local str="Blocking will be re-enabled in ${tt} minutes"
           tt=$((${tt}*60))
-          nohup bash -c "sleep ${tt}; pihole enable" </dev/null &>/dev/null &
+          nohup bash -c "sleep ${tt}; ${PI_HOLE_BIN_DIR}/pihole enable" </dev/null &>/dev/null &
         else
           local error=true
         fi
@@ -226,7 +223,7 @@ Options:
     sed -i 's/^QUERY_LOGGING=true/QUERY_LOGGING=false/' /etc/pihole/setupVars.conf
     if [[ "${2}" != "noflush" ]]; then
       # Flush logs
-      pihole -f
+      "${PI_HOLE_BIN_DIR}"/pihole -f
     fi
     echo -e "  ${INFO} Disabling logging..."
     local str="Logging has been disabled!"
@@ -279,7 +276,7 @@ statusFunc() {
       *) echo -e "  ${INFO} Pi-hole blocking will be enabled";;
     esac
     # Enable blocking
-    pihole enable
+    "${PI_HOLE_BIN_DIR}"/pihole enable
   fi
 }