diff --git a/README.md b/README.md
index 02e7468f..9dc189e4 100644
--- a/README.md
+++ b/README.md
@@ -1,4 +1,4 @@
-# Automated Install 
+# Automated Install
 ##### Designed For Raspberry Pi A+, B, B+, 2, Zero (with an Ethernet adapter), and also works on most Debian based distros!
 
 1. Install Raspbian on Raspberry Pi variants or a Debian based distribution on other hardware or virtual machines
diff --git a/adlists.default b/adlists.default
index 81676a3d..4a8c82db 100644
--- a/adlists.default
+++ b/adlists.default
@@ -5,11 +5,11 @@
 #    2. run `nano /etc/pihole/adlists.list`                                    #
 #    3. Uncomment or comment any of the below lists                            #
 #                                                                              #
-#  Know of any other lists? Feel free to let us know about them, or add them   # 
+#  Know of any other lists? Feel free to let us know about them, or add them   #
 #  to this file!                                                               #
 ################################################################################
 
-# The below list amalgamates several lists we used previously. 
+# The below list amalgamates several lists we used previously.
 # See `https://github.com/StevenBlack/hosts` for details
 https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts
 
@@ -30,8 +30,8 @@ http://hosts-file.net/ad_servers.txt
 # ADZHOSTS list. Has been known to block legitimate domains
 #http://optimate.dl.sourceforge.net/project/adzhosts/HOSTS.txt
 
-# Windows 10 telemetry list - warning this one may block windows update
-#https://raw.githubusercontent.com/crazy-max/HostsWindowsBlocker/master/hosts.txt
+# Windows 10 telemetry list
+#https://raw.githubusercontent.com/crazy-max/WindowsSpyBlocker/master/hostsBlockWindowsSpy.txt
 
 # Securemecca.com list - Also blocks "adult" sites (pornography/gambling etc)
 #http://securemecca.com/Downloads/hosts.txt
@@ -39,6 +39,9 @@ http://hosts-file.net/ad_servers.txt
 # Quidsup's tracker list
 https://raw.githubusercontent.com/quidsup/notrack/master/trackers.txt
 
+# Block the BBC News website Breaking News banner
+#https://raw.githubusercontent.com/BreakingTheNews/BreakingTheNews.github.io/master/hosts
+
 
 # Untested Lists:
 #https://raw.githubusercontent.com/reek/anti-adblock-killer/master/anti-adblock-killer-filters.txt
diff --git a/advanced/Scripts/blacklist.sh b/advanced/Scripts/blacklist.sh
index 70b8131a..0eab679d 100644
--- a/advanced/Scripts/blacklist.sh
+++ b/advanced/Scripts/blacklist.sh
@@ -51,13 +51,13 @@ if [[ -f $piholeIPv6file ]];then
 fi
 
 
-function HandleOther(){	
+function HandleOther(){
   #check validity of domain
 	validDomain=$(echo $1 | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
-	
+
 	if [ -z "$validDomain" ]; then
 		echo $1 is not a valid argument or domain name
-	else	  
+	else
 	  domList=("${domList[@]}" $validDomain)
 	fi
 }
@@ -66,9 +66,9 @@ function PopBlacklistFile(){
 	#check blacklist file exists, and if not, create it
 	if [[ ! -f $blacklist ]];then
   	  touch $blacklist
-	fi	
+	fi
 	for dom in "${domList[@]}"
-	do	  
+	do
 	  if $addmode; then
 	  	AddDomain $dom
 	  else
@@ -97,7 +97,7 @@ function AddDomain(){
 }
 
 function RemoveDomain(){
-  
+
   bool=false
   grep -Ex -q "$1" $blacklist || bool=true
   if $bool; then
@@ -110,42 +110,42 @@ function RemoveDomain(){
     if $versbose; then
     echo "::: Un-blacklisting $dom..."
     fi
-    domToRemoveList=("${domToRemoveList[@]}" $1)    
-    modifyHost=true	  	
-  fi  	
+    domToRemoveList=("${domToRemoveList[@]}" $1)
+    modifyHost=true
+  fi
 }
 
-function ModifyHostFile(){	
+function ModifyHostFile(){
 	 if $addmode; then
 	    #add domains to the hosts file
 	    if [[ -r $blacklist ]];then
 	      numberOf=$(cat $blacklist | sed '/^\s*$/d' | wc -l)
         plural=; [[ "$numberOf" != "1" ]] && plural=s
         echo ":::"
-        echo -n "::: Modifying HOSTS file to blacklist $numberOf domain${plural}..."	   		    
-	    	if [[ -n $piholeIPv6 ]];then	    	  
+        echo -n "::: Modifying HOSTS file to blacklist $numberOf domain${plural}..."
+	    	if [[ -n $piholeIPv6 ]];then
 	    	  cat $blacklist | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $adList
-	      else	        
+	      else
 	      	cat $blacklist | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >>$adList
-	      fi		    
-		   
+	      fi
+
 	  	fi
 	  else
-		
+
 		echo ":::"
 	  for dom in "${domToRemoveList[@]}"
-		do	  
-	      #we need to remove the domains from the blacklist file and the host file	     
+		do
+	      #we need to remove the domains from the blacklist file and the host file
 				echo "::: $dom"
 				echo -n ":::    removing from HOSTS file..."
-	      echo $dom | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /[^.]'{}'(?!.)/;' $adList  
+	      echo $dom | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /[^.]'{}'(?!.)/;' $adList
 	      echo " done!"
 	      echo -n ":::    removing from blackist.txt..."
 	      echo $dom | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' $blacklist
 	      echo " done!"
-		done	  
+		done
 		fi
-	  
+
 }
 
 function Reload() {
@@ -170,17 +170,17 @@ function Reload() {
 for var in "$@"
 do
   case "$var" in
-    "-nr"| "--noreload"  ) reload=false;;        			
+    "-nr"| "--noreload"  ) reload=false;;
     "-d" | "--delmode"   ) addmode=false;;
     "-f" | "--force"     ) force=true;;
-    "-q" | "--quiet"     ) versbose=false;;  			
+    "-q" | "--quiet"     ) versbose=false;;
     *                    ) HandleOther $var;;
   esac
 done
 
 PopBlacklistFile
 
-if $modifyHost || $force; then	
+if $modifyHost || $force; then
 	ModifyHostFile
 else
   if $versbose; then
diff --git a/advanced/Scripts/chronometer.sh b/advanced/Scripts/chronometer.sh
index ebed8684..8cd9f042 100755
--- a/advanced/Scripts/chronometer.sh
+++ b/advanced/Scripts/chronometer.sh
@@ -73,9 +73,9 @@ function outputJSON(){
 	CalcQueriesToday
 	CalcblockedToday
 	CalcPercentBlockedToday
-	
+
 	CalcBlockedDomains
-	
+
 	printf '{"domains_being_blocked":"%s","dns_queries_today":"%s","ads_blocked_today":"%s","ads_percentage_today":"%s"}\n' "$blockedDomainsTotal" "$queriesToday" "$blockedToday" "$percentBlockedToday"
 }
 
@@ -88,30 +88,31 @@ function normalChrono(){
 		echo "        $(ifconfig eth0 | awk '/inet addr/ {print $2}' | cut -d':' -f2)"
 		echo ""
 		uptime | cut -d' ' -f11-
-		uptime -p
+		#uptime -p	#Doesn't work on all versions of uptime
+		uptime | awk -F'( |,|:)+' '{if ($7=="min") m=$6; else {if ($7~/^day/) {d=$6;h=$8;m=$9} else {h=$6;m=$7}}} {print d+0,"days,",h+0,"hours,",m+0,"minutes."}'
 		echo "-------------------------------"
 		# Uncomment to continually read the log file and display the current domain being blocked
 		#tail -f /var/log/pihole.log | awk '/\/etc\/pihole\/gravity.list/ {if ($7 != "address" && $7 != "name" && $7 != "/etc/pihole/gravity.list") print $7; else;}'
-		
+
 		#uncomment next 4 lines to use original query count calculation
 		#today=$(date "+%b %e")
 		#todaysQueryCount=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ {print $7}' | wc -l)
 		#todaysQueryCountV4=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ && /\[A\]/ {print $7}' | wc -l)
 		#todaysQueryCountV6=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ && /\[AAAA\]/ {print $7}' | wc -l)
-				
-		
+
+
 		CalcQueriesToday
 		CalcblockedToday
 		CalcPercentBlockedToday
-		
+
 		CalcBlockedDomains
-		
+
 		echo "Blocking:      $blockedDomainsTotal"
 		#below commented line does not add up to todaysQueryCount
 		#echo "Queries:       $todaysQueryCountV4 / $todaysQueryCountV6"
 		echo "Queries:       $queriesToday" #same total calculation as dashboard
 	  echo "Pi-holed:      $blockedToday ($percentBlockedToday%)"
-		
+
 		sleep 5
 	done
 }
@@ -125,7 +126,7 @@ function displayHelp(){
     echo "Options:"
     echo "  -j, --json		output stats as JSON formatted string"
     echo "  -h, --help	display this help text"
-    
+
     exit 1
 }
 
@@ -137,7 +138,7 @@ for var in "$@"
 do
   case "$var" in
     "-j" | "--json"  ) outputJSON;;
-    "-h" | "--help"  ) displayHelp;;        			
+    "-h" | "--help"  ) displayHelp;;
     *                ) exit 1;;
   esac
 done
diff --git a/advanced/Scripts/updateDashboard.sh b/advanced/Scripts/updateDashboard.sh
index edf04896..6955683d 100644
--- a/advanced/Scripts/updateDashboard.sh
+++ b/advanced/Scripts/updateDashboard.sh
@@ -63,7 +63,7 @@ make_repo() {
 update_repo() {
     # pull the latest commits
     cd "$WEB_INTERFACE_DIR"
-    git pull    
+    git pull
 }
 
 main
diff --git a/advanced/Scripts/whitelist.sh b/advanced/Scripts/whitelist.sh
index 853c3b79..79f71a71 100755
--- a/advanced/Scripts/whitelist.sh
+++ b/advanced/Scripts/whitelist.sh
@@ -50,13 +50,13 @@ if [[ -f $piholeIPv6file ]];then
 fi
 
 
-function HandleOther(){	
+function HandleOther(){
   #check validity of domain
 	validDomain=$(echo $1 | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
-	
+
 	if [ -z "$validDomain" ]; then
 		echo "::: $1 is not a valid argument or domain name"
-	else	  
+	else
 	  domList=("${domList[@]}" $validDomain)
 	fi
 }
@@ -65,9 +65,9 @@ function PopWhitelistFile(){
 	#check whitelist file exists, and if not, create it
 	if [[ ! -f $whitelist ]];then
   	  touch $whitelist
-	fi	
+	fi
 	for dom in "${domList[@]}"
-	do	  
+	do
 	  if $addmode; then
 	  	AddDomain $dom
 	  else
@@ -79,7 +79,7 @@ function PopWhitelistFile(){
 function AddDomain(){
 #| sed 's/\./\\./g'
 	bool=false
-	
+
 	grep -Ex -q "$1" $whitelist || bool=true
 	if $bool; then
 	  #domain not found in the whitelist file, add it!
@@ -99,7 +99,7 @@ function AddDomain(){
 }
 
 function RemoveDomain(){
-  
+
   bool=false
   grep -Ex -q "$1" $whitelist || bool=true
   if $bool; then
@@ -113,11 +113,11 @@ function RemoveDomain(){
     #echo "::: Un-whitelisting $dom..."
     #fi
     domToRemoveList=("${domToRemoveList[@]}" $1)
-    modifyHost=true	  	
-  fi  	
+    modifyHost=true
+  fi
 }
 
-function ModifyHostFile(){	
+function ModifyHostFile(){
 	 if $addmode; then
 	    #remove domains in  from hosts file
 	    if [[ -r $whitelist ]];then
@@ -129,19 +129,19 @@ function ModifyHostFile(){
         awk -F':' '{print $1}' $whitelist | while read line; do echo "$piholeIP $line"; done > /etc/pihole/whitelist.tmp
         awk -F':' '{print $1}' $whitelist | while read line; do echo "$piholeIPv6 $line"; done >> /etc/pihole/whitelist.tmp
         echo "l" >> /etc/pihole/whitelist.tmp
-        grep -F -x -v -f /etc/pihole/whitelist.tmp /etc/pihole/gravity.list > /etc/pihole/gravity.tmp        
+        grep -F -x -v -f /etc/pihole/whitelist.tmp /etc/pihole/gravity.list > /etc/pihole/gravity.tmp
         rm /etc/pihole/gravity.list
         mv /etc/pihole/gravity.tmp /etc/pihole/gravity.list
         rm /etc/pihole/whitelist.tmp
         echo " done!"
-	  	  
+
 	  	fi
 	  else
 	    #we need to add the removed domains to the hosts file
 	    echo ":::"
 	    echo "::: Modifying HOSTS file to un-whitelist domains..."
 	    for rdom in "${domToRemoveList[@]}"
-	    do	      
+	    do
 	    	if [[ -n $piholeIPv6 ]];then
 	    	  echo -n ":::    Un-whitelisting $rdom on IPv4 and IPv6..."
 	    	  echo $rdom | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $adList
@@ -155,7 +155,7 @@ function ModifyHostFile(){
 	      echo $rdom| sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' $whitelist
 	      echo " done!"
 	    done
-	  fi	
+	  fi
 }
 
 function Reload() {
@@ -179,10 +179,10 @@ function Reload() {
 for var in "$@"
 do
   case "$var" in
-    "-nr"| "--noreload"  ) reload=false;;        			
+    "-nr"| "--noreload"  ) reload=false;;
     "-d" | "--delmode"   ) addmode=false;;
     "-f" | "--force"     ) force=true;;
-    "-q" | "--quiet"     ) versbose=false;;  			
+    "-q" | "--quiet"     ) versbose=false;;
     *                    ) HandleOther $var;;
   esac
 done
diff --git a/advanced/dnsmasq.conf.original b/advanced/dnsmasq.conf.original
index 598d6390..9e4cc92e 100644
--- a/advanced/dnsmasq.conf.original
+++ b/advanced/dnsmasq.conf.original
@@ -27,8 +27,8 @@
 
 # Replies which are not DNSSEC signed may be legitimate, because the domain
 # is unsigned, or may be forgeries. Setting this option tells dnsmasq to
-# check that an unsigned reply is OK, by finding a secure proof that a DS 
-# record somewhere between the root and the domain does not exist. 
+# check that an unsigned reply is OK, by finding a secure proof that a DS
+# record somewhere between the root and the domain does not exist.
 # The cost of setting this is that even queries in unsigned domains will need
 # one or more extra DNS queries to verify.
 #dnssec-check-unsigned
@@ -183,11 +183,11 @@
 #dhcp-range=1234::2, 1234::500, 64, 12h
 
 # Do Router Advertisements, BUT NOT DHCP for this subnet.
-#dhcp-range=1234::, ra-only 
+#dhcp-range=1234::, ra-only
 
 # Do Router Advertisements, BUT NOT DHCP for this subnet, also try and
-# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack 
-# hosts. Use the DHCPv4 lease to derive the name, network segment and 
+# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack
+# hosts. Use the DHCPv4 lease to derive the name, network segment and
 # MAC address and assume that the host will also have an
 # IPv6 address calculated using the SLAAC alogrithm.
 #dhcp-range=1234::, ra-names
@@ -210,9 +210,9 @@
 #dhcp-range=1234::, ra-stateless, ra-names
 
 # Do router advertisements for all subnets where we're doing DHCPv6
-# Unless overriden by ra-stateless, ra-names, et al, the router 
+# Unless overriden by ra-stateless, ra-names, et al, the router
 # advertisements will have the M and O bits set, so that the clients
-# get addresses and configuration from DHCPv6, and the A bit reset, so the 
+# get addresses and configuration from DHCPv6, and the A bit reset, so the
 # clients don't use SLAAC addresses.
 #enable-ra
 
@@ -278,11 +278,11 @@
 # any machine with Ethernet address starting 11:22:33:
 #dhcp-host=11:22:33:*:*:*,set:red
 
-# Give a fixed IPv6 address and name to client with       
+# Give a fixed IPv6 address and name to client with
 # DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2
 # Note the MAC addresses CANNOT be used to identify DHCPv6 clients.
 # Note also the they [] around the IPv6 address are obilgatory.
-#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] 
+#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5]
 
 # Ignore any clients which are not specified in dhcp-host lines
 # or /etc/ethers. Equivalent to ISC "deny unknown-clients".
@@ -338,7 +338,7 @@
 # Send DHCPv6 option. Note [] around IPv6 addresses.
 #dhcp-option=option6:dns-server,[1234::77],[1234::88]
 
-# Send DHCPv6 option for namservers as the machine running 
+# Send DHCPv6 option for namservers as the machine running
 # dnsmasq and another.
 #dhcp-option=option6:dns-server,[::],[1234::88]
 
@@ -645,4 +645,4 @@
 #conf-dir=/etc/dnsmasq.d,.bak
 
 # Include all files in a directory which end in .conf
-#conf-dir=/etc/dnsmasq.d/*.conf 
+#conf-dir=/etc/dnsmasq.d/*.conf
diff --git a/automated install/basic-install.sh b/automated install/basic-install.sh
index 9ecf50f9..c785de52 100755
--- a/automated install/basic-install.sh	
+++ b/automated install/basic-install.sh	
@@ -111,7 +111,7 @@ welcomeDialogs() {
 	whiptail --msgbox --backtitle "Plea" --title "Free and open source" "The Pi-hole is free, but powered by your donations:  http://pi-hole.net/donate" $r $c
 
 	# Explain the need for a static address
-	whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.	
+	whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
 	In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
 }
 
@@ -119,12 +119,12 @@ welcomeDialogs() {
 verifyFreeDiskSpace() {
 	# 25MB is the minimum space needed (20MB install + 5MB one day of logs.)
 	requiredFreeBytes=51200
-	
-	existingFreeBytes=`df -lk / 2>&1 | awk '{print $4}' | head -2 | tail -1`    	
-	if ! [[ "$existingFreeBytes" =~ ^([0-9])+$ ]]; then       
-		existingFreeBytes=`df -lk /dev 2>&1 | awk '{print $4}' | head -2 | tail -1`		
+
+	existingFreeBytes=`df -lk / 2>&1 | awk '{print $4}' | head -2 | tail -1`
+	if ! [[ "$existingFreeBytes" =~ ^([0-9])+$ ]]; then
+		existingFreeBytes=`df -lk /dev 2>&1 | awk '{print $4}' | head -2 | tail -1`
 	fi
-	
+
 	if [[ $existingFreeBytes -lt $requiredFreeBytes ]]; then
 		whiptail --msgbox --backtitle "Insufficient Disk Space" --title "Insufficient Disk Space" "\nYour system appears to be low on disk space. pi-hole recomends a minimum of $requiredFreeBytes Bytes.\nYou only have $existingFreeBytes Free.\n\nIf this is a new install you may need to expand your disk.\n\nTry running:\n    'sudo raspi-config'\nChoose the 'expand file system option'\n\nAfter rebooting, run this installation again.\n\ncurl -L install.pi-hole.net | bash\n" $r $c
 		echo "$existingFreeBytes is less than $requiredFreeBytes"
@@ -164,7 +164,7 @@ chooseInterface() {
 		echo "::: Cancel selected, exiting...."
 		exit 1
 	fi
-	
+
 }
 
 cleanupIPv6() {
@@ -188,7 +188,7 @@ use4andor6() {
 			IPv6	)		useIPv6=true;;
 			esac
 		done
-		
+
 		if [ $useIPv4 ] && [ ! $useIPv6 ]; then
 			getStaticIPv4Settings
 			setStaticIPv4
@@ -331,7 +331,7 @@ function valid_ip()
 {
 	local  ip=$1
 	local  stat=1
-	
+
 	if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
 		OIFS=$IFS
 		IFS='.'
@@ -383,9 +383,9 @@ setDNS(){
 			Custom)
 				until [[ $DNSSettingsCorrect = True ]]
 				do
-					
+
 					strInvalid="Invalid"
-				
+
 					if [ ! $piholeDNS1 ]; then
 						if [ ! $piholeDNS2 ]; then
 							prePopulate=""
@@ -397,38 +397,38 @@ setDNS(){
 					elif [ $piholeDNS1 ] && [ $piholeDNS2 ]; then
 						prePopulate="$piholeDNS1, $piholeDNS2"
 					fi
-					
+
 					piholeDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)"  --inputbox "Enter your desired upstream DNS provider(s), seperated by a comma.\n\nFor example '8.8.8.8, 8.8.4.4'" $r $c "$prePopulate" 3>&1 1>&2 2>&3)
 					if [[ $? = 0 ]];then
 						piholeDNS1=$(echo $piholeDNS | sed 's/[, \t]\+/,/g' | awk -F, '{print$1}')
 						piholeDNS2=$(echo $piholeDNS | sed 's/[, \t]\+/,/g' | awk -F, '{print$2}')
-						
+
 						if ! valid_ip $piholeDNS1 || [ ! $piholeDNS1 ]; then
 							piholeDNS1=$strInvalid
 						fi
-												
+
 						if ! valid_ip $piholeDNS2 && [ $piholeDNS2 ]; then
 							piholeDNS2=$strInvalid
 						fi
-						
+
 					else
 						echo "::: Cancel selected, exiting...."
 						exit 1
 					fi
-					
+
 					if [[ $piholeDNS1 == $strInvalid ]] || [[ $piholeDNS2 == $strInvalid ]]; then
-						whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\n\n    DNS Server 1:   $piholeDNS1\n    DNS Server 2:   $piholeDNS2" $r $c						
-						
+						whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\n\n    DNS Server 1:   $piholeDNS1\n    DNS Server 2:   $piholeDNS2" $r $c
+
 						if [[ $piholeDNS1 == $strInvalid ]]; then
 							piholeDNS1=""
 						fi
-						
+
 						if [[ $piholeDNS2 == $strInvalid ]]; then
 							piholeDNS2=""
 						fi
-						
+
 						DNSSettingsCorrect=False
-					else					
+					else
 						if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\n    DNS Server 1:   $piholeDNS1\n    DNS Server 2:   $piholeDNS2" $r $c) then
 								DNSSettingsCorrect=True
 						else
@@ -450,11 +450,11 @@ versionCheckDNSmasq(){
   dnsFile1="/etc/dnsmasq.conf"
   dnsFile2="/etc/dnsmasq.conf.orig"
   dnsSearch="addn-hosts=/etc/pihole/gravity.list"
-  
+
   defaultFile="/etc/.pihole/advanced/dnsmasq.conf.original"
   newFileToInstall="/etc/.pihole/advanced/01-pihole.conf"
   newFileFinalLocation="/etc/dnsmasq.d/01-pihole.conf"
-  
+
   if [ -f $dnsFile1 ]; then
       echo -n ":::    Existing dnsmasq.conf found..."
       if grep -q $dnsSearch $dnsFile1; then
@@ -466,14 +466,14 @@ versionCheckDNSmasq(){
           $SUDO cp $defaultFile $dnsFile1
           echo " done."
       else
-        echo " it is not a pi-hole file, leaving alone!"        
+        echo " it is not a pi-hole file, leaving alone!"
       fi
   else
       echo -n ":::    No dnsmasq.conf found.. restoring default dnsmasq.conf..."
       $SUDO cp $defaultFile $dnsFile1
       echo " done."
   fi
-  
+
   echo -n ":::    Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf..."
   $SUDO cp $newFileToInstall $newFileFinalLocation
   echo " done."
@@ -672,9 +672,9 @@ installCron() {
 runGravity() {
 	# Rub gravity.sh to build blacklists
 	$SUDO echo ":::"
-	$SUDO echo "::: Preparing to run gravity.sh to refresh hosts..."	
+	$SUDO echo "::: Preparing to run gravity.sh to refresh hosts..."
 	if ls /etc/pihole/list* 1> /dev/null 2>&1; then
-		echo "::: Cleaning up previous install (preserving whitelist/blacklist)"		
+		echo "::: Cleaning up previous install (preserving whitelist/blacklist)"
 		$SUDO rm /etc/pihole/list.*
 	fi
 	#Don't run as SUDO, this was causing issues
@@ -698,7 +698,7 @@ setUser(){
 setPassword() {
 	# Password needed to authorize changes to lists from admin page
 	pass=$(whiptail --passwordbox "Please enter a password to secure your Pi-hole web interface." 10 50 3>&1 1>&2 2>&3)
-	
+
 	if [ $? = 0 ]; then
 		# Entered password
 		echo $pass > /etc/pihole/password.txt
diff --git a/gravity.sh b/gravity.sh
index 321aec27..33f5d6d5 100755
--- a/gravity.sh
+++ b/gravity.sh
@@ -107,7 +107,7 @@ function gravity_collapse() {
 				sources+=($line)
 			fi
 		done < $adListFile
-		echo " done!"	
+		echo " done!"
 	else
 		#no custom file found, use defaults!
 		echo -n "::: No custom adlist file detected, reading from default file..."
@@ -120,8 +120,8 @@ function gravity_collapse() {
 				sources+=($line)
 			fi
 		done < $adListDefault
-		echo " done!"	
-	fi	
+		echo " done!"
+	fi
 
 	# Create the pihole resource directory if it doesn't exist.  Future files will be stored here
 	if [[ -d $piholeDir ]];then
@@ -169,9 +169,9 @@ function gravity_transport() {
 	fi
 
 	# Silently curl url
-	curl -s $cmd_ext $heisenbergCompensator -A "$agent" $url > $patternBuffer 
+	curl -s $cmd_ext $heisenbergCompensator -A "$agent" $url > $patternBuffer
 	# Check for list updates
-	gravity_patternCheck $patternBuffer 
+	gravity_patternCheck $patternBuffer
 
 	# Cleanup
 	rm -f $patternBuffer
@@ -219,13 +219,13 @@ function gravity_Schwarzchild() {
   echo "::: "
 	# Find all active domains and compile them into one file and remove CRs
 	echo -n "::: Aggregating list of domains..."
-	truncate -s 0 $piholeDir/$matterandlight & spinner $! 
+	truncate -s 0 $piholeDir/$matterandlight & spinner $!
 	for i in "${activeDomains[@]}"
 	do
    		cat $i |tr -d '\r' >> $piholeDir/$matterandlight
 	done
 	echo " done!"
-	
+
 }
 
 
@@ -233,12 +233,12 @@ function gravity_Blacklist(){
 	# Append blacklist entries if they exist
 	echo -n "::: Running blacklist script to update HOSTS file...."
 	$blacklistScript -f -nr -q > /dev/null & spinner $!
-	
+
 	numBlacklisted=$(wc -l < "/etc/pihole/blacklist.txt")
 	plural=; [[ "$numBlacklisted" != "1" ]] && plural=s
   echo " $numBlacklisted domain${plural} blacklisted!"
-  
-	
+
+
 }
 
 
@@ -247,7 +247,7 @@ function gravity_Whitelist() {
 	# Prevent our sources from being pulled into the hole
 	plural=; [[ "${sources[@]}" != "1" ]] && plural=s
 	echo -n "::: Adding ${#sources[@]} ad list source${plural} to the whitelist..."
-	
+
 	urls=()
 	for url in ${sources[@]}
 	do
@@ -255,16 +255,16 @@ function gravity_Whitelist() {
         urls=("${urls[@]}" $tmp)
 	done
 	echo " done!"
-	
+
 	echo -n "::: Running whitelist script to update HOSTS file...."
 	$whitelistScript -f -nr -q ${urls[@]} > /dev/null & spinner $!
-		
+
 	numWhitelisted=$(wc -l < "/etc/pihole/whitelist.txt")
 	plural=; [[ "$numWhitelisted" != "1" ]] && plural=s
   echo " $numWhitelisted domain${plural} whitelisted!"
-  
-  
-		
+
+
+
 }
 
 function gravity_unique() {
@@ -284,7 +284,7 @@ function gravity_hostFormat() {
   	#Add dummy domain Pi-Hole.IsWorking.OK to the top of gravity.list to make ping result return a friendlier looking domain!
     echo -e "$piholeIP Pi-Hole.IsWorking.OK \n$piholeIPv6 Pi-Hole.IsWorking.OK" > $piholeDir/$accretionDisc
     cat $piholeDir/$eventHorizon | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $piholeDir/$accretionDisc
-    
+
   else
       # Otherwise, just create gravity.list as normal using IPv4
       #Add dummy domain Pi-Hole.IsWorking.OK to the top of gravity.list to make ping result return a friendlier looking domain!
@@ -319,12 +319,12 @@ function gravity_advanced() {
 	echo -n "::: Formatting list of domains to remove comments...."
 	awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' $piholeDir/$matterandlight | sed -nr -e 's/\.{2,}/./g' -e '/\./p' >  $piholeDir/$supernova & spinner $!
   echo " done!"
-  
+
 	numberOf=$(wc -l < $piholeDir/$supernova)
 	echo "::: $numberOf domains being pulled in by gravity..."
-    
+
 	gravity_unique
-  
+
 }
 
 function gravity_reload() {
@@ -333,7 +333,7 @@ function gravity_reload() {
 	echo -n "::: Cleaning up un-needed files..."
 	$SUDO rm /etc/pihole/pihole.*
 	echo " done!"
-	
+
 	# Reload hosts file
 	echo ":::"
 	echo -n "::: Refresh lists in dnsmasq..."