Merge pull request #4 from jacobsalmela/master

Rebase
This commit is contained in:
mospaeda 2015-09-17 23:51:32 +02:00
commit d44e48114e
26 changed files with 277 additions and 322 deletions

View file

@ -1,26 +1,50 @@
# Raspberry Pi Ad Blocker
**A black hole for ads, hence Pi-hole**
![Pi-hole](http://www.hdwallpapersimages.com/wp-content/uploads/2014/03/Black-Hole-Images-540x303.jpg)
![Pi-hole](http://i.imgur.com/wd5ltCU.png)
The Pi-hole is a DNS/Web server that will **block ads for any device**.
The Pi-hole is a DNS/Web server that will **block ads for any device on your network**.
## Coverage
Featured on [MakeUseOf](http://www.makeuseof.com/tag/adblock-everywhere-raspberry-pi-hole-way/) and [Lifehacker](http://lifehacker.com/turn-a-raspberry-pi-into-an-ad-blocker-with-a-single-co-1686093533)!
## Automated Install
On a clean installation of Raspbian, you can run this command to **auto-install the Pi-hole**. Once installed, configure any device to use the Raspberry Pi as your DNS server and the ads will be blocked.
1. Install Raspbian
2. Set a **static** IP address
3. Run the command below
```curl -s "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/automated%20install/basic-install.sh" | bash```
Once installed, **configure any device to use the Raspberry Pi as its DNS server and the ads will be blocked**. You can also configure your router's DHCP options to assign the Pi as clients DNS server so they do not need to do it manually.
A more detailed explanation of the installation can be found [here](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0).
[![Donate](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif "AdminLTE Presentation")](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3J2L3Z4DHW9UY "Donate")
## Gravity
The [gravity-adv.sh](https://github.com/jacobsalmela/pi-hole/blob/master/gravity-adv.sh) does most of the magic. The script pulls in ad domains from many sources and compiles them into a single list of [over 120,000 entries](http://jacobsalmela.com/blocking-ads-from-120000-domains/).
The [gravity.sh](https://github.com/jacobsalmela/pi-hole/blob/master/gravity.sh) does most of the magic. The script pulls in ad domains from many sources and compiles them into a single list of [over 1.6 million entries](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0).
## Whitelist and blacklist
You can add a whitelist or blacklist in ```/etc/pihole/``` and the script will apply those files automatically.
You can add a `whitelist.txt` or `blacklist.txt` in `/etc/pihole/` and the script will apply those files automatically.
## Web Interface
I am also working on a [Web interface](https://github.com/jacobsalmela/AdminLTE#pi-hole-admin-dashboard) so you can view stats and change settings.
## Custom Config File
If you want to use your own variables for the gravity script (i.e. storing the files in a different location) and don't want to have to change them every time there is an update to the script, create a file called `/etc/pihole/pihole.conf`. In it, you should add your own variables in a similar fashion as shown below:
```
origin=/var/run/pihole
adList=/etc/dnsmasq.d/adList
```
See [this PR](https://github.com/jacobsalmela/pi-hole/pull/20) for more details.
### How It Works
A technical and detailed description can be found [here](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0)!
## Other Operating Systems
This script will work for other UNIX-like systems with some slight **modifications**. As long as you can install dnsmasq and a Webserver, it should work OK. The automated install only works for a clean install of Raspiban right now since that is how the project originated.
This script will work for other UNIX-like systems with some slight **modifications**. As long as you can install `dnsmasq` and a Webserver, it should work OK. The automated install only works for a clean install of Raspiban right now since that is how the project originated.
## Optimizations
I am working on some great optimizations to allow the script to run much faster. I also have a bunch of new sources for ad domains but I still need to see if the lists are OK.
[![Donate](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif "AdminLTE Presentation")](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3J2L3Z4DHW9UY "Donate")

BIN
advanced/GIFs/25Bytes.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 35 B

BIN
advanced/GIFs/26Bytes.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 26 B

BIN
advanced/GIFs/37Bytes.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 37 B

BIN
advanced/GIFs/43Bytes.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 43 B

28
advanced/Scripts/chronometer.sh Executable file
View file

@ -0,0 +1,28 @@
#!/bin/bash
# Displays Pi-hole stats on the Adafruit PiTFT 2.8" touch screen
# Set the pi user to log in automatically and run this script from /etc/profile
for (( ; ; ))
do
clear
# Displays a colorful Pi-hole logo
toilet -f small -F gay Pi-hole
echo " $(ifconfig eth0 | awk '/inet addr/ {print $2}' | cut -d':' -f2)"
echo ""
uptime | cut -d' ' -f11-
echo "-------------------------------"
# Uncomment to continually read the log file and display the current domain being blocked
#tail -f /var/log/pihole.log | awk '/\/etc\/pihole\/gravity.list/ {if ($7 != "address" && $7 != "name" && $7 != "/etc/pihole/gravity.list") print $7; else;}'
today=$(date "+%b %e")
todaysQueryCount=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ {print $7}' | wc -l)
todaysQueryCountV4=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ && /\[A\]/ {print $7}' | wc -l)
todaysQueryCountV6=$(cat /var/log/pihole.log | grep "$today" | awk '/query/ && /\[AAAA\]/ {print $7}' | wc -l)
todaysAdsEliminated=$(cat /var/log/pihole.log | grep "$today" | awk '/\/etc\/pihole\/gravity.list/ {print $7}' | wc -l)
dividend=$(echo "$todaysAdsEliminated/$todaysQueryCount" | bc -l)
fp=$(echo "$dividend*100" | bc -l)
percentAds=$(echo ${fp:0:4})
echo "Queries: $todaysQueryCountV4 / $todaysQueryCountV6"
echo "Pi-holed: $todaysAdsEliminated ($percentAds%)"
sleep 5
done

13
advanced/Scripts/whitelist.sh Executable file
View file

@ -0,0 +1,13 @@
#!/bin/bash
# For each argument passed to this script
for var in "$@"
do
echo "Whitelisting $var..."
# Use sed to search for the domain in /etc/pihole/gravity.list and remove it using an in-place edit
sed -i "/$var/d" /etc/pihole/gravity.list
# Also add the domain to the whitelist.txt in /etc/pihole
echo "$var" >> /etc/pihole/whitelist.txt
done
echo "** $# domain(s) whitelisted."
# Force dnsmasq to reload /etc/pihole/gravity.list
kill -HUP $(pidof dnsmasq)

View file

@ -1,9 +1,12 @@
addn-hosts=/etc/pihole/gravity.list
domain-needed
bogus-priv
no-resolv
server=127.0.0.1
server=8.8.8.8
server=8.8.4.4
interface=eth0
listen-address=127.0.0.1
cache-size=10000
log-queries
log-facility=/var/log/pihole.log
local-ttl=300

1
advanced/dphys-swapfile Normal file
View file

@ -0,0 +1 @@
CONF_SWAPSIZE=500

View file

@ -1,8 +0,0 @@
# !/bin/bash
# Download the ad list
sudo /usr/local/bin/gravity.sh
# Enable DNS and start blocking ads
sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
sudo mv /etc/dnsmasq.conf.pihole /etc/dnsmasq.conf
sudo service dnsmasq start

View file

@ -1,29 +0,0 @@
#!/bin/bash
# /usr/local/bin/gravity.sh
# URL to pull list of known ad servers from
adListURL="http://pgl.yoyo.org/adservers/serverlist.php?hostformat=dnsmasq&showintro=0&mimetype=plaintext"
# Address to send ads to
piholeIP="127.0.0.1"
# Where the list of ad servers are stored once downloaded
# Any file in /etc/dnsmasq.d is loaded automatically when the service starts
adFile="/etc/dnsmasq.d/adList.conf"
# The temporary file for holding
eventHorizion="/etc/dnsmasq.d/adList.conf.tmp"
# Parses out the default 127.0.0.1 address and replaces it with the IP where ads will be sent
curl $adListURL | sed "s/127\.0\.0\.1/$piholeIP/" > $eventHorizion
sleep 10
# If the temporary list of ad servers already exists (the eventHorizion)
if [ -f "$eventHorizion" ];then
# Then replace it as the new ad file
mv -f $eventHorizion $adFile
else
echo "Error building the ad list, please try again."
exit 1
fi

View file

@ -1,6 +1,4 @@
<html>
<head>
</head>
<body>
</body>
</html>

View file

@ -1,9 +1,7 @@
server.modules = (
"mod_access",
"mod_alias",
"mod_expire",
"mod_compress",
"mod_redirect",
"mod_auth",
"mod_rewrite"
)
@ -28,8 +26,13 @@ include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port
include_shell "/usr/share/lighttpd/create-mime.assign.pl"
include_shell "/usr/share/lighttpd/include-conf-enabled.pl"
# Set access to 1 day for better query performance when the list gets so large
# http://jacobsalmela.com/raspberry-pi-block-ads-adtrap/#comment-2013820434
$HTTP["url"] =~ "^/pihole/" {
expire.url = ("" => "access plus 1 days")
}
# Rewrites all URLs to the /var/www/pihole/index.html
# This should be a blank file (for speed)
$HTTP["host"] =~ ".*" {
url.rewrite = (".*" => "pihole/index.html")
}

View file

@ -18,18 +18,32 @@ echo " |_| |_| |_| |_|\___/|_|\___| "
echo " "
echo " Raspberry Pi Ad-blocker "
echo " "
echo " Automated install "
echo " --Advanced-- "
echo "Set a static IP before running this!"
echo " "
echo " Press Enter when ready "
echo " "
sleep 2
read
if [[ -f /etc/dnsmasq.d/adList.conf ]];then
echo "Original Pi-hole detected. Initiating sub space transport..."
sudo mkdir -p /etc/pihole/original/
mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d")
mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d")
mv /etc/resolv.conf /etc/pihole/original/resolv.conf.$(date "+%Y-%m-%d")
mv /etc/lighttpd/lighttpd.conf /etc/pihole/original/lighttpd.conf.$(date "+%Y-%m-%d")
mv /var/www/pihole/index.html /etc/pihole/original/index.html.$(date "+%Y-%m-%d")
mv /usr/local/bin/gravity.sh /etc/pihole/original/gravity.sh.$(date "+%Y-%m-%d")
else
:
fi
echo "Updating the Pi..."
sudo apt-get update
sudo apt-get -y upgrade
echo "Installing DNS..."
sudo apt-get -y install dnsutils dnsmasq
sudo apt-get -y install dnsmasq
sudo update-rc.d dnsmasq enable
echo "Installing a Web server"
sudo apt-get -y install lighttpd
@ -48,19 +62,16 @@ sudo mv /var/www/index.lighttpd.html /var/www/index.lighttpd.orig
sudo curl -o /etc/dnsmasq.conf "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf"
sudo curl -o /etc/lighttpd/lighttpd.conf "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf"
sudo mkdir /var/www/pihole
sudo curl -o /var/www/pihole/index.html "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/index.html"
echo "Turning services back on..."
sudo service dnsmasq start
sudo service lighttpd start
sudo curl -o /var/www/pihole/index.html "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html"
echo "Locating the Pi-hole..."
sudo curl -o /usr/local/bin/gravity.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity-adv.sh"
sudo curl -o /usr/local/bin/gravity.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh"
sudo curl -o /usr/local/bin/chronometer.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh"
sudo chmod 755 /usr/local/bin/gravity.sh
sudo chmod 755 /usr/local/bin/chronometer.sh
echo "Entering the event horizon..."
sudo /usr/local/bin/gravity.sh
echo "Restarting services..."
sudo service dnsmasq restart
sudo service lighttpd restart
echo "Restarting..."
sudo shutdown -r now

View file

@ -1,12 +0,0 @@
no-resolv
no-poll
server=/localnet/192.168.0.1
server=/localnet/8.8.8.8
server=/localnet/8.8.4.4
domain-needed
interface=eth0
strict-order
min-port=4096
cache-size=10000
log-queries
bogus-priv

View file

@ -1,2 +0,0 @@
address=/ads.hulu.com/192.168.1.101
address=/ads-v-darwin.hulu.com/192.168.1.101

View file

@ -1,8 +0,0 @@
<html>
<head>
<title>Pi-hole blocked an ad</title>
</head>
<body>
<h1>No ads here</h1>
</body>
</html>

View file

@ -3,7 +3,7 @@ server.modules = (
"mod_alias",
"mod_compress",
"mod_redirect",
# "mod_rewrite"
"mod_rewrite"
)
server.document-root = "/var/www"
@ -27,6 +27,6 @@ include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port
include_shell "/usr/share/lighttpd/create-mime.assign.pl"
include_shell "/usr/share/lighttpd/include-conf-enabled.pl"
$HTTP["host"] =~ "ads.hulu.com|ads-v-darwin.hulu.com|" {
url.redirect = ( "^/(.*)" => "http://192.168.1.101:8200/MediaItems/19.mov")
$HTTP["host"] =~ "ads.hulu.com|ads-v-darwin.hulu.com" {
url.redirect = ( ".*" => "http://192.168.1.101:8200/MediaItems/19.mov")
}

View file

@ -1,6 +0,0 @@
# !/bin/bash
# DNS config file
# Run as a local script since modifying it will disconnect the Internet connection
sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
sudo mv /etc/dnsmasq.conf.pihole /etc/dnsmasq.conf
sudo service dnsmasq start

View file

@ -1,71 +0,0 @@
#!/bin/bash
# Block Hulu Plus ads using a Raspberry Pi
# Install with this command (from the Pi):
#
# curl -s https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/block%20hulu%20ads/setup.sh | bash
#
# Or run the commands below in order
# Update the Pi
sudo apt-get update
#sudo apt-get -y upgrade
# Install DNS
sudo apt-get -y install dnsutils dnsmasq
sudo service dnsmasq stop
# Install Web server
sudo apt-get -y install lighttpd
sudo service lighttpd stop
# Install streaming software
sudo apt-get -y install minidlna
sudo service minidlna stop
# Configure Web server
#sudo lighty-enable-mod fastcgi-php
sudo chown www-data:www-data /var/www
sudo chmod 775 /var/www
sudo usermod -a -G www-data pi
sudo mv /var/www/index.lighttpd.html /var/www/index.lighttpd.orig
sudo curl -o /var/www/index.html "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/block%20hulu%20ads/index.html"
sudo mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
sudo curl -o /etc/lighttpd/lighttpd.conf "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/block%20hulu%20ads/lighttpd.conf"
# Configure streaming service
sudo mv /etc/minidlna.conf /etc/minidlna.conf.orig
sudo mkdir /var/lib/minidlna/videos/
sudo curl -o /etc/minidlna.conf "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/block%20hulu%20ads/minidlna.conf"
sudo service minidlna start
sudo curl -o /var/lib/minidlna/videos/pi-hole.mov "https://dl.dropboxusercontent.com/u/16366947/Documents/Videos/pi-hole.mov"
sudo service minidlna force-reload
tail /var/log/minidlna.log
# Configure DNS
sudo curl -o /etc/dnsmasq.conf.pihole "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/dnsmasq.conf"
sudo curl -o /tmp/piholedns.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/block%20hulu%20ads/setup-resolv.sh"
sudo chmod 755 /tmp/piholedns.sh
# Download [advanced] ad-blocking script and then run it
# http://jacobsalmela.com/raspberry-pi-ad-blocker-advanced-setup/
sudo curl -o /usr/local/bin/gravity.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity-adv.sh"
sudo chmod 755 /usr/local/bin/gravity.sh
clear
echo ""
echo ""
echo ""
echo ""
echo "Go get some coffee--this will take a while"
echo ""
echo ""
echo ""
echo ""
sleep 5
sudo /usr/local/bin/gravity.sh
sudo service dnsmasq stop
# Restart everything to apply all the changes
sudo service lighttpd start
sudo service minidlna start
sudo /tmp/piholedns.sh

View file

@ -1,6 +0,0 @@
domain-needed
interface=eth0
min-port=4096
cache-size=10000
log-queries
bogus-priv

View file

@ -1,66 +0,0 @@
#!/bin/bash
# The Pi-hole now blocks over 120,000 ad domains
# Address to send ads to (the RPi)
piholeIP="127.0.0.1"
# Optionally, uncomment to automatically detect the local IP address.
#piholeIP=$(hostname -I)
# Config file to hold URL rules
eventHorizion="/etc/dnsmasq.d/adList.conf"
blacklist=/etc/pihole/blacklist.txt
whitelist=/etc/pihole/whitelist.txt
# Create the pihole resource directory if it doesn't exist. Future files will be stored here
if [[ -d /etc/pihole/ ]];then
:
else
echo "Forming pihole directory..."
sudo mkdir /etc/pihole
fi
echo "Getting yoyo ad list..." # Approximately 2452 domains at the time of writing
curl -s -d mimetype=plaintext -d hostformat=unixhosts http://pgl.yoyo.org/adservers/serverlist.php? | sort > /tmp/matter.txt
echo "Getting winhelp2002 ad list..." # 12985 domains
curl -s http://winhelp2002.mvps.org/hosts.txt | grep -v "#" | grep -v "127.0.0.1" | sed '/^$/d' | sed 's/\ /\\ /g' | awk '{print $2}' | sort >> /tmp/matter.txt
echo "Getting adaway ad list..." # 445 domains
curl -s https://adaway.org/hosts.txt | grep -v "#" | grep -v "::1" | sed '/^$/d' | sed 's/\ /\\ /g' | awk '{print $2}' | grep -v '^\\' | grep -v '\\$' | sort >> /tmp/matter.txt
echo "Getting hosts-file ad list..." # 28050 domains
curl -s http://hosts-file.net/.%5Cad_servers.txt | grep -v "#" | grep -v "::1" | sed '/^$/d' | sed 's/\ /\\ /g' | awk '{print $2}' | grep -v '^\\' | grep -v '\\$' | sort >> /tmp/matter.txt
echo "Getting malwaredomainlist ad list..." # 1352 domains
curl -s http://www.malwaredomainlist.com/hostslist/hosts.txt | grep -v "#" | sed '/^$/d' | sed 's/\ /\\ /g' | awk '{print $3}' | grep -v '^\\' | grep -v '\\$' | sort >> /tmp/matter.txt
echo "Getting adblock.gjtech ad list..." # 696 domains
curl -s http://adblock.gjtech.net/?format=unix-hosts | grep -v "#" | sed '/^$/d' | sed 's/\ /\\ /g' | awk '{print $2}' | grep -v '^\\' | grep -v '\\$' | sort >> /tmp/matter.txt
echo "Getting someone who cares ad list..." # 10600
curl -s http://someonewhocares.org/hosts/hosts | grep -v "#" | sed '/^$/d' | sed 's/\ /\\ /g' | grep -v '^\\' | grep -v '\\$' | awk '{print $2}' | grep -v '^\\' | grep -v '\\$' | sort >> /tmp/matter.txt
echo "Getting Mother of All Ad Blocks list..." # 102168 domains!! Thanks Kacy
curl -A 'Mozilla/5.0 (X11; Linux x86_64; rv:30.0) Gecko/20100101 Firefox/30.0' -e http://forum.xda-developers.com/ http://adblock.mahakala.is/ | grep -v "#" | awk '{print $2}' | sort >> /tmp/matter.txt
# Add entries from the local blacklist file if it exists in /etc/pihole directory
if [[ -f $blacklist ]];then
echo "Getting the local blacklist from /etc/pihole directory"
cat $blacklist >> /tmp/matter.txt
else
:
fi
# Sort the aggregated results and remove any duplicates
# Remove entries from the whitelist file if it exists at the root of the current user's home folder
if [[ -f $whitelist ]];then
echo "Removing duplicates, whitelisting, and formatting the list of domains..."
cat /tmp/matter.txt | sed $'s/\r$//' | sort | uniq | sed '/^$/d' | grep -v -x -f $whitelist | awk -v "IP=$piholeIP" '{sub(/\r$/,""); print "address=/"$0"/"IP}' > /tmp/andLight.txt
numberOfSitesWhitelisted=$(cat $whitelist | wc -l | sed 's/^[ \t]*//')
echo "$numberOfSitesWhitelisted domains whitelisted."
else
echo "Removing duplicates and formatting the list of domains..."
cat /tmp/matter.txt | sed $'s/\r$//' | sort | uniq | sed '/^$/d' | awk -v "IP=$piholeIP" '{sub(/\r$/,""); print "address=/"$0"/"IP}' > /tmp/andLight.txt
fi
# Count how many domains/whitelists were added so it can be displayed to the user
numberOfAdsBlocked=$(cat /tmp/andLight.txt | wc -l | sed 's/^[ \t]*//')
echo "$numberOfAdsBlocked ad domains blocked."
# Turn the file into a dnsmasq config file
sudo mv /tmp/andLight.txt $eventHorizion
# Restart DNS
sudo service dnsmasq restart

179
gravity.sh Normal file → Executable file
View file

@ -1,28 +1,161 @@
#!/bin/bash
# /usr/local/bin/gravity.sh
# http://pi-hole.net
# Compiles a list of ad-serving domains by downloading them from multiple sources
# URL to pull list of known ad servers from
adListURL="http://pgl.yoyo.org/adservers/serverlist.php?hostformat=dnsmasq&showintro=0&mimetype=plaintext"
# This script should only be run after you have a static IP address set on the Pi
piholeIP=$(hostname -I)
# Address to send ads to
piholeIP="127.0.0.1"
# Ad-list sources--one per line in single quotes
sources=('https://adaway.org/hosts.txt'
'http://adblock.gjtech.net/?format=unix-hosts'
'http://adblock.mahakala.is/'
'http://hosts-file.net/.%5Cad_servers.txt'
'http://www.malwaredomainlist.com/hostslist/hosts.txt'
'http://pgl.yoyo.org/adservers/serverlist.php?'
'http://someonewhocares.org/hosts/hosts'
'http://winhelp2002.mvps.org/hosts.txt')
# Where the list of ad servers are stored once downloaded
# Any file in /etc/dnsmasq.d is loaded automatically when the service starts
adFile="/etc/dnsmasq.d/adList.conf"
# The temporary file for holding
eventHorizion="/etc/dnsmasq.d/adList.conf.tmp"
# Parses out the default 127.0.0.1 address and replaces it with the IP where ads will be sent
curl $adListURL | sed "s/127\.0\.0\.1/$piholeIP/" > $eventHorizion
# If the temporary list of ad servers already exists (the eventHorizion)
if [ -f "$eventHorizion" ];then
# Then replace it as the new ad file
mv -f $eventHorizion $adFile
else
echo "Error building the ad list, please try again."
exit 1
# Variables for various stages of downloading and formatting the list
adList=/etc/pihole/gravity.list
origin=/etc/pihole
piholeDir=/etc/pihole
if [[ -f $piholeDir/pihole.conf ]];then
. $piholeDir/pihole.conf
fi
service dnsmasq restart
justDomainsExtension=domains
matter=pihole.0.matter.txt
andLight=pihole.1.andLight.txt
supernova=pihole.2.supernova.txt
eventHorizon=pihole.3.eventHorizon.txt
accretionDisc=pihole.4.accretionDisc.txt
eyeOfTheNeedle=pihole.5.wormhole.txt
blacklist=$piholeDir/blacklist.txt
latentBlacklist=$origin/latentBlacklist.txt
whitelist=$piholeDir/whitelist.txt
latentWhitelist=$origin/latentWhitelist.txt
echo "** Neutrino emissions detected..."
# Create the pihole resource directory if it doesn't exist. Future files will be stored here
if [[ -d $piholeDir ]];then
:
else
echo "** Creating pihole directory..."
sudo mkdir $piholeDir
fi
# Add additional swap to prevent the "Error fork: unable to allocate memory" message: https://github.com/jacobsalmela/pi-hole/issues/37
function createSwapFile()
#########################
{
echo "** Creating more swap space to accomodate large solar masses..."
sudo dphys-swapfile swapoff
sudo curl -s -o /etc/dphys-swapfile https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dphys-swapfile
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
}
if [[ -f /etc/dphys-swapfile ]];then
swapSize=$(cat /etc/dphys-swapfile | grep -m1 CONF_SWAPSIZE | cut -d'=' -f2)
if [[ $swapSize != 500 ]];then
mv /etc/dphys-swapfile /etc/dphys-swapfile.orig
echo "** Current swap size is $swapSize"
createSwapFile
else
:
fi
else
echo "** No swap file found. Creating one..."
createSwapFile
fi
# Loop through domain list. Download each one and remove commented lines (lines beginning with '# 'or '/') and blank lines
for ((i = 0; i < "${#sources[@]}"; i++))
do
url=${sources[$i]}
# Get just the domain from the URL
domain=$(echo "$url" | cut -d'/' -f3)
# Save the file as list.#.domain
saveLocation=$origin/list.$i.$domain.$justDomainsExtension
echo -n "Getting $domain list... "
# Use a case statement to download lists that need special cURL commands to complete properly
case "$domain" in
"adblock.mahakala.is") data=$(curl -s -A 'Mozilla/5.0 (X11; Linux x86_64; rv:30.0) Gecko/20100101 Firefox/30.0' -e http://forum.xda-developers.com/ -z $saveLocation $url);;
"pgl.yoyo.org") data=$(curl -s -d mimetype=plaintext -d hostformat=hosts -z $saveLocation $url);;
*) data=$(curl -s -z $saveLocation -A "Mozilla/10.0" $url);;
esac
if [[ -n "$data" ]];then
# Remove comments and print only the domain name
# Most of the lists downloaded are already in hosts file format but the spacing/formating is not contigious
# This helps with that and makes it easier to read
# It also helps with debugging so each stage of the script can be researched more in depth
echo "$data" | awk 'NF {if ($1 !~ "#") { if (NF>1) {print $2} else {print $1}}}' | \
sed -e 's/^[. \t]*//' -e 's/\.\.\+/./g' -e 's/[. \t]*$//' | grep "\." > $saveLocation
echo "Done."
else
echo "Skipping list because it does not have any new entries."
fi
done
# Find all files with the .domains extension and compile them into one file and remove CRs
echo "** Aggregating list of domains..."
find $origin/ -type f -name "*.$justDomainsExtension" -exec cat {} \; | tr -d '\r' > $origin/$matter
# Append blacklist entries if they exist
if [[ -f $blacklist ]];then
numberOf=$(cat $blacklist | sed '/^\s*$/d' | wc -l)
echo "** Blacklisting $numberOf domain(s)..."
cat $blacklist >> $origin/$matter
else
:
fi
function gravity_advanced()
###########################
{
numberOf=$(cat $origin/$andLight | sed '/^\s*$/d' | wc -l)
echo "** $numberOf domains being pulled in by gravity..."
# Remove carriage returns and preceding whitespace
cat $origin/$andLight | sed $'s/\r$//' | sed '/^\s*$/d' > $origin/$supernova
# Sort and remove duplicates
cat $origin/$supernova | sort | uniq > $origin/$eventHorizon
numberOf=$(cat $origin/$eventHorizon | sed '/^\s*$/d' | wc -l)
echo "** $numberOf unique domains trapped in the event horizon."
# Format domain list as "192.168.x.x domain.com"
echo "** Formatting domains into a HOSTS file..."
cat $origin/$eventHorizon | awk '{sub(/\r$/,""); print "'"$piholeIP"'" $0}' > $origin/$accretionDisc
# Copy the file over as /etc/pihole/gravity.list so dnsmasq can use it
sudo cp $origin/$accretionDisc $adList
kill -HUP $(pidof dnsmasq)
}
# Whitelist (if applicable) then remove duplicates and format for dnsmasq
if [[ -f $whitelist ]];then
# Remove whitelist entries
numberOf=$(cat $whitelist | sed '/^\s*$/d' | wc -l)
plural=; [[ "$numberOf" != "1" ]] && plural=s
echo "** Whitelisting $numberOf domain${plural}..."
# Append a "$" to the end, prepend a "^" to the beginning, and
# replace "." with "\." of each line to turn each entry into a
# regexp so it can be parsed out with grep -x
awk -F '[# \t]' 'NF>0&&$1!="" {print "^"$1"$"}' $whitelist | sed 's/\./\\./g' > $latentWhitelist
else
rm $latentWhitelist
fi
# Prevent our sources from being pulled into the hole
plural=; [[ "${#sources[@]}" != "1" ]] && plural=s
echo "** Whitelisting ${#sources[@]} ad list source${plural}..."
for url in ${sources[@]}
do
echo "$url" | awk -F '/' '{print "^"$3"$"}' | sed 's/\./\\./g' >> $latentWhitelist
done
grep -vxf $latentWhitelist $origin/$matter > $origin/$andLight
gravity_advanced

View file

@ -1,48 +0,0 @@
# /etc/lighttpd/lighttpd.conf
server.modules = (
"mod_access",
"mod_alias",
"mod_compress",
"mod_redirect",
"mod_auth",
"mod_rewrite",
)
server.document-root = "/var/www"
server.upload-dirs = ( "/var/cache/lighttpd/uploads" )
server.errorlog = "/var/log/lighttpd/error.log"
server.pid-file = "/var/run/lighttpd.pid"
server.username = "www-data"
server.groupname = "www-data"
server.port = 80
index-file.names = ( "index.php", "index.html", "index.lighttpd.html" )
url.access-deny = ( "~", ".inc" )
static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
compress.cache-dir = "/var/cache/lighttpd/compress/"
compress.filetype = ( "application/javascript", "text/css", "text/html", "text/plain" )
# default listening port for IPv6 falls back to the IPv4 port
include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port
include_shell "/usr/share/lighttpd/create-mime.assign.pl"
include_shell "/usr/share/lighttpd/include-conf-enabled.pl"
# Optional if a password protected directory is desired
# See http://jacobsalmela.com/password-protect-a-lighttpd-web-server-on-a-raspberry-pi-using-mod-auth/
#auth.backend = "htdigest"
#auth.backend.htdigest.userfile = "/etc/lighttpd/.htpasswd/lighttpd-htdigest.user"
#auth.require = ( "/stream/" =>
# (
# "method" => "digest",
# "realm" => "lcars",
# "require" => "valid-user"
# ),
#)
# Rewrites all URLs to the /var/www/pihole/index.html
# This should be a blank file (for speed)
$HTTP["host"] =~ ".*" {
url.rewrite = (".*" => "pihole/index.html")
}

Binary file not shown.

Before

Width:  |  Height:  |  Size: 68 B

View file

@ -1,3 +0,0 @@
nameserver 192.168.1.101
nameserver 8.8.8.8
nameserver 8.8.4.4