diff --git a/automated install/install.sh b/automated install/install.sh
new file mode 100644
index 00000000..badfa318
--- /dev/null
+++ b/automated install/install.sh	
@@ -0,0 +1,59 @@
+#!/usr/bin/env bash
+# Pi-hole: A black hole for Internet advertisements
+# (c) 2015, 2016 by Jacob Salmela
+# Network-wide ad blocking via your Raspberry Pi
+# http://pi-hole.net
+# Blacklists domains
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+
+
+#Check if we have the function and variable files
+if [ ! -f /etc/pihole/pihole.var ]; then
+	curl -o $HOME/piholeInstall/pihole.vars https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/automated%20install/pihole.vars
+	source $HOME/piholeInstall/pihole.var
+else
+	source /etc/pihole/pihole.var
+fi
+
+if [ ! -f /etc/pihole/pihole.funcs ]; then
+	curl -o $HOME/piholeInstall/pihole.funcs https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/automated%20install/pihole.funcs
+	source $HOME/piholeInstall/pihole.funcs
+else
+	source /etc/pihole/pihole.funcs
+fi
+
+###########Begin Script
+RootCheck
+
+if [ ! -d /etc/pihole ];then
+	$SUDO mkdir -p /etc/pihole/
+fi
+
+#Display the welcom dialogs
+welcomeDialogs
+
+# Just back up the original Pi-hole right away since it won't take long and it gets it out of the way
+backupLegacyPihole
+# Find interfaces and let the user choose one
+chooseInterface
+# Let the user decide if they want to block ads over IPv4 and/or IPv6
+use4andor6
+
+# Decide what upstream DNS Servers to use
+setDNS
+
+# Install and log everything to a file
+installPihole | tee $tmpLog
+
+# Move the log file into /etc/pihole for storage
+$SUDO mv $tmpLog $instalLogLoc
+
+displayFinalMessage
+
+# Start services
+$SUDO service dnsmasq start
+$SUDO service lighttpd start
\ No newline at end of file
diff --git a/automated install/pihole.funcs b/automated install/pihole.funcs
new file mode 100644
index 00000000..27bfb358
--- /dev/null
+++ b/automated install/pihole.funcs	
@@ -0,0 +1,508 @@
+#!/usr/bin/env bash
+# Pi-hole: A black hole for Internet advertisements
+# (c) 2015, 2016 by Jacob Salmela
+# Network-wide ad blocking via your Raspberry Pi
+# http://pi-hole.net
+# Blacklists domains
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+
+source /etc/pihole/pihole.var
+
+RootCheck(){
+	echo ":::"
+	if [[ $EUID -eq 0 ]];then
+		echo "::: You are root."
+	else
+		echo "::: sudo will be used for the install."
+		# Check if it is actually installed
+		# If it isn't, exit because the install cannot complete
+		if [[ $(dpkg-query -s sudo) ]];then
+			export SUDO="sudo"
+		else
+			echo "::: Please install sudo or run this as root."
+			exit 1
+		fi
+	fi
+}
+
+spinner() {
+	local pid=$1
+
+	spin='-\|/'
+	i=0
+	while $SUDO kill -0 $pid 2>/dev/null
+	do
+		i=$(( (i+1) %4 ))
+		printf "\b${spin:$i:1}"
+		sleep .1
+	done
+	printf "\b"
+}
+
+backupLegacyPihole() {
+	# This function detects and backups the pi-hole v1 files.  It will not do anything to the current version files.
+	if [[ -f /etc/dnsmasq.d/adList.conf ]];then
+		echo "::: Original Pi-hole detected.  Initiating sub space transport"
+		$SUDO mkdir -p /etc/pihole/original/
+		$SUDO mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d")
+		$SUDO mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d")
+		$SUDO mv /etc/resolv.conf /etc/pihole/original/resolv.conf.$(date "+%Y-%m-%d")
+		$SUDO mv /etc/lighttpd/lighttpd.conf /etc/pihole/original/lighttpd.conf.$(date "+%Y-%m-%d")
+		$SUDO mv /var/www/pihole/index.html /etc/pihole/original/index.html.$(date "+%Y-%m-%d")
+		$SUDO mv /usr/local/bin/gravity.sh /etc/pihole/original/gravity.sh.$(date "+%Y-%m-%d")
+	else
+		:
+	fi
+}
+
+welcomeDialogs() {
+	# Display the welcome dialog
+	whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
+
+	# Support for a part-time dev
+	whiptail --msgbox --backtitle "Plea" --title "Free and open source" "The Pi-hole is free, but powered by your donations:  http://pi-hole.net/donate" $r $c
+
+	# Explain the need for a static address
+	whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.	
+	In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
+}
+
+chooseInterface() {
+	# Turn the available interfaces into an array so it can be used with a whiptail dialog
+	interfacesArray=()
+	firstloop=1
+
+	while read -r line
+	do
+		mode="OFF"
+		if [[ $firstloop -eq 1 ]]; then
+			firstloop=0
+			mode="ON"
+		fi
+		interfacesArray+=("$line" "available" "$mode")
+	done <<< "$availableInterfaces"
+
+	# Find out how many interfaces are available to choose from
+	interfaceCount=$(echo "$availableInterfaces" | wc -l)
+	chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" $r $c $interfaceCount)
+	chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty)
+	if [[ $? = 0 ]];then
+		for desiredInterface in $chooseInterfaceOptions
+		do
+		piholeInterface=$desiredInterface
+		echo "::: Using interface: $piholeInterface"
+		echo ${piholeInterface} > /tmp/piholeINT
+		done
+	else
+		echo "::: Cancel selected, exiting...."
+		exit 1
+	fi
+	
+}
+
+use4andor6() {
+	# Let use select IPv4 and/or IPv6
+	cmd=(whiptail --separate-output --checklist "Select Protocols" $r $c 2)
+	options=(IPv4 "Block ads over IPv4" on
+	IPv6 "Block ads over IPv6" off)
+	choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty)
+	if [[ $? = 0 ]];then
+		for choice in $choices
+		do
+			case $choice in
+			IPv4	)		useIPv4=true;;
+			IPv6	)		useIPv6=true;;
+			esac
+		done
+		
+		if [ $useIPv4 ] && [ ! $useIPv6 ]; then
+			getStaticIPv4Settings
+			setStaticIPv4
+			echo "::: Using IPv4 on $IPv4addr"
+			echo "::: IPv6 will NOT be used."
+		fi
+		if [ ! $useIPv4 ] && [ $useIPv6 ]; then
+			useIPv6dialog
+			echo "::: IPv4 will NOT be used."
+			echo "::: Using IPv6 on $piholeIPv6"
+		fi
+		if [ $useIPv4 ] && [  $useIPv6 ]; then
+			getStaticIPv4Settings
+			setStaticIPv4
+			useIPv6dialog
+			echo "::: Using IPv4 on $IPv4addr"
+			echo "::: Using IPv6 on $piholeIPv6"
+		fi
+		if [ ! $useIPv4 ] && [ ! $useIPv6 ]; then
+			echo "::: Cannot continue, neither IPv4 or IPv6 selected"
+			echo "::: Exiting"
+			exit 1
+		fi
+	else
+		echo "::: Cancel selected. Exiting..."
+		exit 1
+	fi
+}
+
+useIPv6dialog() {
+	# Show the IPv6 address used for blocking
+	piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
+	whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$piholeIPv6 will be used to block ads." $r $c
+
+	$SUDO touch /etc/pihole/.useIPv6
+}
+
+getStaticIPv4Settings() {
+	# Ask if the user wants to use DHCP settings as their static IP
+	if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
+									IP address:    $IPv4addr
+									Gateway:       $IPv4gw" $r $c) then
+		# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
+		whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict.  But in most cases the router is smart enough to not do that.
+		If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
+		It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
+		# Nothing else to do since the variables are already set above
+	else
+		# Otherwise, we need to ask the user to input their desired settings.
+		# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
+		# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
+		until [[ $ipSettingsCorrect = True ]]
+		do
+			# Ask for the IPv4 address
+			IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3)
+			if [[ $? = 0 ]];then
+				echo "::: Your static IPv4 address:    $IPv4addr"
+				# Ask for the gateway
+				IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3)
+				if [[ $? = 0 ]];then
+					echo "::: Your static IPv4 gateway:    $IPv4gw"
+					# Give the user a chance to review their settings before moving on
+					if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
+							IP address:    $IPv4addr
+							Gateway:       $IPv4gw" $r $c)then
+							# If the settings are correct, then we need to set the piholeIP
+							# Saving it to a temporary file us to retrieve it later when we run the gravity.sh script
+							echo ${IPv4addr%/*} > /tmp/piholeIP
+							echo $piholeInterface > /tmp/piholeINT
+							# After that's done, the loop ends and we move on
+							ipSettingsCorrect=True
+					else
+						# If the settings are wrong, the loop continues
+						ipSettingsCorrect=False
+					fi
+				else
+					# Cancelling gateway settings window
+					ipSettingsCorrect=False
+					echo "::: Cancel selected. Exiting..."
+					exit 1
+				fi
+			else
+				# Cancelling IPv4 settings window
+				ipSettingsCorrect=False
+				echo "::: Cancel selected. Exiting..."
+				exit 1
+			fi
+		done
+	# End the if statement for DHCP vs. static
+	fi
+}
+
+setDHCPCD() {
+	# Append these lines to dhcpcd.conf to enable a static IP
+	echo "::: interface $piholeInterface
+	static ip_address=$IPv4addr
+	static routers=$IPv4gw
+	static domain_name_servers=$IPv4gw" | $SUDO tee -a $dhcpcdFile >/dev/null
+}
+
+setStaticIPv4() {
+	# Tries to set the IPv4 address
+	if grep -q $IPv4addr $dhcpcdFile; then
+		# address already set, noop
+		:
+	else
+		setDHCPCD
+		$SUDO ip addr replace dev $piholeInterface $IPv4addr
+		echo ":::"
+		echo "::: Setting IP to $IPv4addr.  You may need to restart after the install is complete."
+		echo ":::"
+	fi
+}
+
+setDNS(){
+	DNSChoseCmd=(whiptail --separate-output --radiolist "Select Upstream DNS Provider" $r $c 2)
+	DNSChooseOptions=(Google "" on
+					  OpenDNS "" off)
+	DNSchoices=$("${DNSChoseCmd[@]}" "${DNSChooseOptions[@]}" 2>&1 >/dev/tty)
+	if [[ $? = 0 ]];then
+		case $DNSchoices in
+			Google)
+				echo "::: Using Google DNS servers."
+				piholeDNS1="8.8.8.8"
+				piholeDNS2="8.8.4.4"
+				;;
+			OpenDNS)
+				echo "::: Using OpenDNS servers."
+				piholeDNS1="208.67.222.222"
+				piholeDNS2="208.67.220.220"
+				;;
+		esac
+	else
+		echo "::: Cancel selected. Exiting..."
+		exit 1
+	fi
+}
+
+versionCheckDNSmasq(){
+  # Check if /etc/dnsmasq.conf is from pihole.  If so replace with an original and install new in .d directory
+  dnsFile1="/etc/dnsmasq.conf"
+  dnsFile2="/etc/dnsmasq.conf.orig"
+  dnsSearch="addn-hosts=/etc/pihole/gravity.list"
+  
+  defaultFile="/etc/.pihole/advanced/dnsmasq.conf.original"
+  newFileToInstall="/etc/.pihole/advanced/01-pihole.conf"
+  newFileFinalLocation="/etc/dnsmasq.d/01-pihole.conf"
+  
+  if [ -f $dnsFile1 ]; then
+      echo -n ":::    Existing dnsmasq.conf found..."
+      if grep -q $dnsSearch $dnsFile1; then
+          echo " it is from a previous pi-hole install."
+          echo -n ":::    Backing up dnsmasq.conf to dnsmasq.conf.orig..."
+          $SUDO mv -f $dnsFile1 $dnsFile2
+          echo " done."
+          echo -n ":::    Restoring default dnsmasq.conf..."
+          $SUDO cp $defaultFile $dnsFile1
+          echo " done."
+      else
+        echo " it is not a pi-hole file, leaving alone!"        
+      fi
+  else
+      echo -n ":::    No dnsmasq.conf found.. restoring default dnsmasq.conf..."
+      $SUDO cp $defaultFile $dnsFile1
+      echo " done."
+  fi
+  
+  echo ":::    Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf..."
+  $SUDO cp $newFileToInstall $newFileFinalLocation
+  echo " done."
+  $SUDO sed -i "s/@INT@/$piholeInterface/" $newFileFinalLocation
+  $SUDO sed -i "s/@DNS1@/$piholeDNS1/" $newFileFinalLocation
+  $SUDO sed -i "s/@DNS2@/$piholeDNS2/" $newFileFinalLocation
+}
+
+installScripts() {
+	# Install the scripts from /etc/.pihole to their various locations
+	$SUDO echo ":::"
+	$SUDO echo -n "::: Installing scripts..."
+	$SUDO cp /etc/.pihole/gravity.sh /usr/local/bin/gravity.sh
+	$SUDO cp /etc/.pihole/advanced/Scripts/chronometer.sh /usr/local/bin/chronometer.sh
+	$SUDO cp /etc/.pihole/advanced/Scripts/whitelist.sh /usr/local/bin/whitelist.sh
+	$SUDO cp /etc/.pihole/advanced/Scripts/blacklist.sh /usr/local/bin/blacklist.sh
+	$SUDO cp /etc/.pihole/advanced/Scripts/piholeLogFlush.sh /usr/local/bin/piholeLogFlush.sh
+	$SUDO cp /etc/.pihole/advanced/Scripts/updateDashboard.sh /usr/local/bin/updateDashboard.sh
+	$SUDO chmod 755 /usr/local/bin/{gravity,chronometer,whitelist,blacklist,piholeLogFlush,updateDashboard}.sh
+	$SUDO echo " done."
+}
+
+installConfigs() {
+	# Install the configs from /etc/.pihole to their various locations
+	$SUDO echo ":::"
+	$SUDO echo "::: Installing configs..."
+	versionCheckDNSmasq
+	$SUDO mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
+	$SUDO cp /etc/.pihole/advanced/lighttpd.conf /etc/lighttpd/lighttpd.conf
+}
+
+stopServices() {
+	# Stop dnsmasq and lighttpd
+	$SUDO echo ":::"
+	$SUDO echo -n "::: Stopping services..."
+	$SUDO service dnsmasq stop & spinner $! || true
+	$SUDO service lighttpd stop & spinner $! || true
+	$SUDO echo " done."
+}
+
+checkForDependencies() {
+	#Running apt-get update/upgrade with minimal output can cause some issues with
+	#requiring user input (e.g password for phpmyadmin see #218)
+	#We'll change the logic up here, to check to see if there are any updates availible and
+	# if so, advise the user to run apt-get update/upgrade at their own discretion
+
+	#Check to see if apt-get update has already been run today
+	# it needs to have been run at least once on new installs!
+
+	timestamp=$(stat -c %Y /var/cache/apt/)
+	timestampAsDate=$(date -d @$timestamp "+%b %e")
+	today=$(date "+%b %e")
+
+	if [ ! "$today" == "$timestampAsDate" ]; then
+	    #update package lists
+	    echo ":::"
+	    echo -n "::: apt-get update has not been run today. Running now..."
+	    $SUDO apt-get -qq update & spinner $!
+	    echo " done!"
+	  fi
+		echo ":::"
+		echo -n "::: Checking apt-get for upgraded packages...."
+		updatesToInstall=$(sudo apt-get -s -o Debug::NoLocking=true upgrade | grep -c ^Inst)
+		echo " done!"
+		echo ":::"
+		if [[ $updatesToInstall -eq "0" ]]; then
+			echo "::: Your pi is up to date! Continuing with pi-hole installation..."
+		else
+			echo "::: There are $updatesToInstall updates availible for your pi!"
+			echo "::: We recommend you run 'sudo apt-get upgrade' after installing Pi-Hole! "
+			echo ":::"
+		fi
+    echo ":::"
+    echo "::: Checking dependencies:"
+
+	dependencies=( dnsutils bc toilet figlet dnsmasq lighttpd php5-common php5-cgi php5 git curl unzip wget )
+	for i in "${dependencies[@]}"
+	do
+	:
+		echo -n ":::    Checking for $i..."
+		if [ $(dpkg-query -W -f='${Status}' $i 2>/dev/null | grep -c "ok installed") -eq 0 ]; then
+			echo -n " Not found! Installing...."
+			$SUDO apt-get -y -qq install $i > /dev/null & spinner $!
+			echo " done!"
+		else
+			echo " already installed!"
+		fi
+	done
+}
+
+getGitFiles() {
+	# Setup git repos for base files and web admin
+	echo ":::"
+	echo "::: Checking for existing base files..."
+	if is_repo $piholeFilesDir; then
+		make_repo $piholeFilesDir $piholeGitUrl
+	else
+		update_repo $piholeFilesDir
+	fi
+
+	echo ":::"
+	echo "::: Checking for existing web interface..."
+	if is_repo $webInterfaceDir; then
+		make_repo $webInterfaceDir $webInterfaceGitUrl
+	else
+		update_repo $webInterfaceDir
+	fi
+}
+
+is_repo() {
+	# If the directory does not have a .git folder it is not a repo
+	echo -n ":::    Checking $1 is a repo..."
+    if [ -d "$1/.git" ]; then
+    		echo " OK!"
+        return 1
+    fi
+    echo " not found!!"
+    return 0
+}
+
+make_repo() {
+    # Remove the non-repod interface and clone the interface
+    echo -n ":::    Cloning $2 into $1..."
+    $SUDO rm -rf $1
+    $SUDO git clone -q "$2" "$1" > /dev/null & spinner $!
+    echo " done!"
+}
+
+update_repo() {
+    # Pull the latest commits
+    echo -n ":::     Updating repo in $1..."
+    cd "$1"
+    $SUDO git pull -q > /dev/null & spinner $!
+    echo " done!"
+}
+
+
+CreateLogFile() {
+	# Create logfiles if necessary
+	echo ":::"
+	$SUDO  echo -n "::: Creating log file and changing owner to dnsmasq..."
+	if [ ! -f /var/log/pihole.log ]; then
+		$SUDO touch /var/log/pihole.log
+		$SUDO chmod 644 /var/log/pihole.log
+		$SUDO chown dnsmasq:root /var/log/pihole.log
+		$SUDO echo " done!"
+	else
+		$SUDO  echo " already exists!"
+	fi
+}
+
+installPiholeWeb() {
+	# Install the web interface
+	$SUDO echo ":::"
+	$SUDO echo -n "::: Installing pihole custom index page..."
+	if [ -d "/var/www/html/pihole" ]; then
+		$SUDO echo " Existing page detected, not overwriting"
+	else
+		$SUDO mkdir /var/www/html/pihole
+		$SUDO mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
+		$SUDO cp /etc/.pihole/advanced/index.html /var/www/html/pihole/index.html
+		$SUDO echo " done!"
+	fi
+}
+
+installCron() {
+	# Install the cron job
+	$SUDO echo ":::"
+	$SUDO echo -n "::: Installing latest Cron script..."
+	$SUDO cp /etc/.pihole/advanced/pihole.cron /etc/cron.d/pihole
+	$SUDO echo " done!"
+}
+
+runGravity() {
+	# Rub gravity.sh to build blacklists
+	$SUDO echo ":::"
+	$SUDO echo "::: Preparing to run gravity.sh to refresh hosts..."	
+	if ls /etc/pihole/list* 1> /dev/null 2>&1; then
+		echo "::: Cleaning up previous install (preserving whitelist/blacklist)"		
+		$SUDO rm /etc/pihole/list.*
+	fi
+	#Don't run as SUDO, this was causing issues
+	echo "::: Running gravity.sh"
+	echo ":::"
+
+	/usr/local/bin/gravity.sh
+}
+
+
+installPihole() {
+	# Install base files and web interface
+	checkForDependencies # done
+	stopServices
+	$SUDO mkdir -p /etc/pihole/
+	$SUDO chown www-data:www-data /var/www/html
+	$SUDO chmod 775 /var/www/html
+	$SUDO usermod -a -G www-data pi
+	$SUDO lighty-enable-mod fastcgi fastcgi-php > /dev/null
+
+	getGitFiles
+	installScripts
+	installConfigs
+	#installWebAdmin
+	CreateLogFile
+	installPiholeWeb
+	installCron
+	runGravity
+}
+
+displayFinalMessage() {
+	# Final completion message to user
+	whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Configure your devices to use the Pi-hole as their DNS server using:
+
+$IPv4addr
+$piholeIPv6
+
+If you set a new IP address, you should restart the Pi.
+
+The install log is in /etc/pihole." $r $c
+}
\ No newline at end of file
diff --git a/automated install/pihole.var b/automated install/pihole.var
new file mode 100644
index 00000000..5e9383d5
--- /dev/null
+++ b/automated install/pihole.var	
@@ -0,0 +1,33 @@
+#!/usr/bin/env bash
+# Pi-hole: A black hole for Internet advertisements
+# (c) 2015, 2016 by Jacob Salmela
+# Network-wide ad blocking via your Raspberry Pi
+# http://pi-hole.net
+# Blacklists domains
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+
+tmpLog=/tmp/pihole-install.log
+instalLogLoc=/etc/pihole/install.log
+
+webInterfaceGitUrl="https://github.com/pi-hole/AdminLTE.git"
+webInterfaceDir="/var/www/html/admin"
+piholeGitUrl="https://github.com/pi-hole/pi-hole.git"
+piholeFilesDir="/etc/.pihole"
+
+piholeInstallDir="/etc/pihole"
+
+r=$(( rows / 2 ))
+c=$(( columns / 2 ))
+
+IPv4dev=$(ip route get 8.8.8.8 | awk '{for(i=1;i<=NF;i++)if($i~/dev/)print $(i+1)}')
+IPv4addr=$(ip -o -f inet addr show dev $IPv4dev | awk '{print $4}' | awk 'END {print}')
+IPv4gw=$(ip route get 8.8.8.8 | awk '{print $3}')
+
+piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
+
+availableInterfaces=$(ip -o link | awk '{print $2}' | grep -v "lo" | cut -d':' -f1)
+dhcpcdFile=/etc/dhcpcd.conf
\ No newline at end of file
diff --git a/automated install/update.sh b/automated install/update.sh
new file mode 100644
index 00000000..c5e4707a
--- /dev/null
+++ b/automated install/update.sh	
@@ -0,0 +1,35 @@
+#!/usr/bin/env bash
+# Pi-hole: A black hole for Internet advertisements
+# (c) 2015, 2016 by Jacob Salmela
+# Network-wide ad blocking via your Raspberry Pi
+# http://pi-hole.net
+# Blacklists domains
+#
+# Pi-hole is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+if [ ! -f /etc/pihole/pihole.var ]; then
+	curl -o $HOME/piholeInstall/pihole.vars https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/automated%20install/pihole.vars
+	source $HOME/piholeInstall/pihole.var
+else
+	source /etc/pihole/pihole.var
+fi
+
+if [ ! -f /etc/pihole/pihole.funcs ]; then
+	curl -o $HOME/piholeInstall/pihole.funcs https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/automated%20install/pihole.funcs
+	source $HOME/piholeInstall/pihole.funcs
+else
+	source /etc/pihole/pihole.funcs
+fi
+
+RootCheck
+
+installPihole | tee $tmpLog
+
+# Move the log file into /etc/pihole for storage
+$SUDO mv $tmpLog $instalLogLoc
+
+# Start services
+$SUDO service dnsmasq start
+$SUDO service lighttpd start
\ No newline at end of file