Merge pull request #639 from pi-hole/development

2.9
This commit is contained in:
Adam Warner 2016-08-30 21:46:04 +01:00 committed by GitHub
commit ec6ecf0d60
14 changed files with 899 additions and 716 deletions

14
.pullapprove.yml Normal file
View file

@ -0,0 +1,14 @@
approve_by_comment: true
approve_regex: '^(Approved|:shipit:|:\+1:)'
reject_regex: '^(Rejected|:-1:)'
reset_on_push: true
author_approval: required
reviewers:
members:
- brantje
- dschaper
- jacobsalmela
- Mcat12
- PromoFaux
name: pullapprove
required: 3

View file

@ -1,20 +1,24 @@
[![Bountysource](https://www.bountysource.com/badge/tracker?tracker_id=3011939)](https://www.bountysource.com/trackers/3011939-pi-hole-pi-hole?utm_source=3011939&utm_medium=shield&utm_campaign=TRACKER_BADGE)
# Automated Install
##### Designed For Raspberry Pi A+, B, B+, 2, Zero, and 3B (with an Ethernet/Wi-Fi adapter) (Works on most Debian distributions!)
Designed For Raspberry Pi A+, B, B+, 2, 3B, and Zero (with an Ethernet/Wi-Fi adapter)
Works on most Debian and CentOS/RHEL based distributions!
1. Install Raspbian
2. Run the command below (downloads [this script](https://github.com/pi-hole/pi-hole/blob/master/automated%20install/basic-install.sh) in case you want to read over it first!)
### ```curl -L https://install.pi-hole.net | bash```
## `curl -L https://install.pi-hole.net | bash`
#### Alternative Semi-Automated install ####
```
### Alternative Semi-Automated install
```bash
wget -O basic-install.sh https://install.pi-hole.net
chmod +x basic-install.sh
./basic-install.sh
```
If you wish to read over the script before running it, then after the `wget` command, do `nano basic-install.sh` to open a text viewer
If you wish to read over the script before running it, then after the `wget` command, do `nano basic-install.sh` to open a text viewer
Once installed, [configure your router to have **DHCP clients use the Pi as their DNS server**](http://pi-hole.net/faq/can-i-set-the-pi-hole-to-be-the-dns-server-at-my-router-so-i-dont-have-to-change-settings-for-my-devices/) and then any device that connects to your network will have ads blocked without any further configuration. Alternatively, you can manually set each device to [use the Raspberry Pi as its DNS server](http://pi-hole.net/faq/how-do-i-use-the-pi-hole-as-my-dns-server/).
@ -22,18 +26,19 @@ Once installed, [configure your router to have **DHCP clients use the Pi as thei
[![60-second install tutorial](http://i.imgur.com/5TEc3a6.png)](https://www.youtube.com/watch?v=TzFLJqUeirA)
## How Does It Work?
## How It Works
**Watch the 60-second video below to get a quick overview**
[![Pi-hole exlplained](http://i.imgur.com/pG1m937.png)](https://youtu.be/9Eti3xibiho)
## Pi-hole Is Free, But Powered By Your Donations
Send a one-time donation or sign up for Optimal.com's service using our link below to provide us with a small portion of the montly fee.
* ![Paypal](http://i.imgur.com/3muNfxu.png) : [Donate](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3J2L3Z4DHW9UY)
* ![Flattr](http://i.imgur.com/ZFceFRu.png) : [Donate](https://flattr.com/submit/auto?user_id=jacobsalmela&url=https://github.com/pi-hole/pi-hole)
* ![Bitcoin](http://i.imgur.com/FIlmOMG.png) : 1GKnevUnVaQM2pQieMyeHkpr8DXfkpfAtL
* ![Optimal.com](http://i.imgur.com/d4EAYrw.png) : [Optimal.com](http://api.optimal.com/partner/v1.0/bmV0d29ya3xkbnN8OlJhc3BiZXJyeSBQaS1Ib2xl/subscribe?redirect=https%3A%2F%2Fpi-hole.net%2Fthank-you%2F) (we get a small comission)
Send a one-time donation or sign up for Optimal.com's service using our link below to provide us with a small portion of the monthly fee.
- ![Paypal](http://i.imgur.com/3muNfxu.png) : [Donate](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3J2L3Z4DHW9UY)
- ![Flattr](http://i.imgur.com/ZFceFRu.png) : [Donate](https://flattr.com/submit/auto?user_id=jacobsalmela&url=https://github.com/pi-hole/pi-hole)
- ![Bitcoin](http://i.imgur.com/FIlmOMG.png) : 1GKnevUnVaQM2pQieMyeHkpr8DXfkpfAtL
## Get Help Or Connect With Us On The Web
@ -49,9 +54,11 @@ Send a one-time donation or sign up for Optimal.com's service using our link bel
The Pi-hole is an **advertising-aware DNS/Web server**. If an ad domain is queried, a small Web page or GIF is delivered in place of the advertisement. You can also [replace ads with any image you want](http://pi-hole.net/faq/is-it-possible-to-change-the-blank-page-that-takes-place-of-the-ads-to-something-else/) since it is just a simple Webpage taking place of the ads.
### Gravity
The [gravity.sh](https://github.com/pi-hole/pi-hole/blob/master/gravity.sh) does most of the magic. The script pulls in ad domains from many sources and compiles them into a single list of [over 1.6 million entries](http://jacobsalmela.com/block-millions-ads-network-wide-with-a-raspberry-pi-hole-2-0) (if you decide to use the [mahakala list](https://github.com/pi-hole/pi-hole/commit/963eacfe0537a7abddf30441c754c67ca1e40965)).
## Web Interface
The [Web interface](https://github.com/jacobsalmela/AdminLTE#pi-hole-admin-dashboard) will be installed automatically so you can view stats and change settings. You can find it at:
`http://192.168.1.x/admin/index.php` or `http://pi.hole/admin`
@ -60,13 +67,13 @@ The [Web interface](https://github.com/jacobsalmela/AdminLTE#pi-hole-admin-dashb
### Whitelist and blacklist
Domains can be whitelisted and blacklisted using two pre-installed scripts. See [the wiki page](https://github.com/pi-hole/pi-hole/wiki/Whitelisting-and-Blacklisting) for more details
![Whitelist editor in the Web interface](http://i.imgur.com/ogu2ewg.png)
Domains can be whitelisted and blacklisted using two pre-installed scripts. See [the wiki page](https://github.com/pi-hole/pi-hole/wiki/Whitelisting-and-Blacklisting) for more details ![Whitelist editor in the Web interface](http://i.imgur.com/ogu2ewg.png)
## API
A basic read-only API can be accessed at `/admin/api.php`. It returns the following JSON:
```JSON
```json
{
"domains_being_blocked": "136708",
"dns_queries_today": "18108",
@ -74,14 +81,15 @@ A basic read-only API can be accessed at `/admin/api.php`. It returns the follow
"ads_percentage_today": "80.89"
}
```
The same output can be acheived on the CLI by running `chronometer.sh -j`
The same output can be achieved on the CLI by running `chronometer.sh -j`
## Real-time Statistics
You can view [real-time stats](http://pi-hole.net/faq/install-the-real-time-lcd-monitor-chronometer/) via `ssh` or on an [2.8" LCD screen](http://amzn.to/1P0q1Fj). This is accomplished via [`chronometer.sh`](https://github.com/pi-hole/pi-hole/blob/master/advanced/Scripts/chronometer.sh).
![Pi-hole LCD](http://i.imgur.com/nBEqycp.jpg)
You can view [real-time stats](http://pi-hole.net/faq/install-the-real-time-lcd-monitor-chronometer/) via `ssh` or on an [2.8" LCD screen](http://amzn.to/1P0q1Fj). This is accomplished via [`chronometer.sh`](https://github.com/pi-hole/pi-hole/blob/master/advanced/Scripts/chronometer.sh). ![Pi-hole LCD](http://i.imgur.com/nBEqycp.jpg)
## Pi-hole Projects
- [Pi-hole stats in your Mac's menu bar](https://getbitbar.com/plugins/Network/pi-hole.1m.py)
- [Get LED alerts for each blocked ad](http://www.stinebaugh.info/get-led-alerts-for-each-blocked-ad-using-pi-hole/)
- [Pi-hole on Ubuntu 14.04 on VirtualBox](http://hbalagtas.blogspot.com/2016/02/adblocking-with-pi-hole-and-ubuntu-1404.html)
@ -94,8 +102,10 @@ You can view [real-time stats](http://pi-hole.net/faq/install-the-real-time-lcd-
- [unRaid-hole](https://github.com/spants/unraidtemplates/blob/master/Spants/unRaid-hole.xml#L13)--[Repo and more info](http://lime-technology.com/forum/index.php?PHPSESSID=c0eae3e5ef7e521f7866034a3336489d&topic=38486.0)
- [Pi-hole on/off button](http://thetimmy.silvernight.org/pages/endisbutton/)
- [Minibian Pi-hole](http://munkjensen.net/wiki/index.php/See_my_Pi-Hole#Minibian_Pi-hole)
- [Windows Tray Stat Application](https://github.com/goldbattle/copernicus)
## Coverage
- [Adafruit livestream install](https://www.youtube.com/watch?v=eg4u2j1HYlI)
- [TekThing: 5 fun, easy projects for a Raspberry Pi](https://youtu.be/QwrKlyC2kdM?t=1m42s)
- [Pi-hole on Adafruit's blog](https://blog.adafruit.com/2016/03/04/pi-hole-is-a-black-hole-for-internet-ads-piday-raspberrypi-raspberry_pi/)
@ -111,4 +121,5 @@ You can view [real-time stats](http://pi-hole.net/faq/install-the-real-time-lcd-
- [Catchpoint: iOS 9 Ad Blocking](http://blog.catchpoint.com/2015/09/14/ad-blocking-apple/)
## Other Operating Systems
This script will work for other UNIX-like systems with some slight **modifications**. As long as you can install `dnsmasq` and a Webserver, it should work OK. The automated install is only for a clean install of a Debian based system, such as the Raspberry Pi.

View file

@ -47,9 +47,9 @@ fi
#globals
basename=pihole
piholeDir=/etc/$basename
adList=$piholeDir/gravity.list
blacklist=$piholeDir/blacklist.txt
piholeDir=/etc/${basename}
adList=${piholeDir}/gravity.list
blacklist=${piholeDir}/blacklist.txt
reload=true
addmode=true
force=false
@ -61,9 +61,9 @@ domToRemoveList=()
piholeIPfile=/etc/pihole/piholeIP
piholeIPv6file=/etc/pihole/.useIPv6
if [[ -f $piholeIPfile ]];then
if [[ -f ${piholeIPfile} ]];then
# If the file exists, it means it was exported from the installation script and we should use that value instead of detecting it in this script
piholeIP=$(cat $piholeIPfile)
piholeIP=$(cat ${piholeIPfile})
#rm $piholeIPfile
else
# Otherwise, the IP address can be taken directly from the machine, which will happen when the script is run by the user and not the installation script
@ -75,13 +75,13 @@ fi
modifyHost=false
# After setting defaults, check if there's local overrides
if [[ -r $piholeDir/pihole.conf ]];then
if [[ -r ${piholeDir}/pihole.conf ]];then
echo "::: Local calibration requested..."
. $piholeDir/pihole.conf
. ${piholeDir}/pihole.conf
fi
if [[ -f $piholeIPv6file ]];then
if [[ -f ${piholeIPv6file} ]];then
# If the file exists, then the user previously chose to use IPv6 in the automated installer
piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
fi
@ -92,14 +92,14 @@ function HandleOther(){
if [ -z "$validDomain" ]; then
echo "::: $1 is not a valid argument or domain name"
else
domList=("${domList[@]}" $validDomain)
domList=("${domList[@]}" ${validDomain})
fi
}
function PopBlacklistFile(){
#check blacklist file exists, and if not, create it
if [[ ! -f $blacklist ]];then
touch $blacklist
if [[ ! -f ${blacklist} ]];then
touch ${blacklist}
fi
for dom in "${domList[@]}"; do
if "$addmode"; then
@ -113,17 +113,17 @@ function PopBlacklistFile(){
function AddDomain(){
#| sed 's/\./\\./g'
bool=false
grep -Ex -q "$1" $blacklist || bool=true
if $bool; then
grep -Ex -q "$1" ${blacklist} || bool=true
if ${bool}; then
#domain not found in the blacklist file, add it!
if $verbose; then
if ${verbose}; then
echo -n "::: Adding $1 to blacklist file..."
fi
echo "$1" >> $blacklist
echo "$1" >> ${blacklist}
modifyHost=true
echo " done!"
else
if $verbose; then
if ${verbose}; then
echo "::: $1 already exists in $blacklist! No need to add"
fi
fi
@ -132,15 +132,15 @@ function AddDomain(){
function RemoveDomain(){
bool=false
grep -Ex -q "$1" $blacklist || bool=true
if $bool; then
grep -Ex -q "$1" ${blacklist} || bool=true
if ${bool}; then
#Domain is not in the blacklist file, no need to Remove
if $verbose; then
if ${verbose}; then
echo "::: $1 is NOT blacklisted! No need to remove"
fi
else
#Domain is in the blacklist file, add to a temporary array
if $verbose; then
if ${verbose}; then
echo "::: Un-blacklisting $dom..."
fi
domToRemoveList=("${domToRemoveList[@]}" $1)
@ -149,17 +149,17 @@ function RemoveDomain(){
}
function ModifyHostFile(){
if $addmode; then
if ${addmode}; then
#add domains to the hosts file
if [[ -r $blacklist ]];then
numberOf=$(cat $blacklist | sed '/^\s*$/d' | wc -l)
if [[ -r ${blacklist} ]];then
numberOf=$(cat ${blacklist} | sed '/^\s*$/d' | wc -l)
plural=; [[ "$numberOf" != "1" ]] && plural=s
echo ":::"
echo -n "::: Modifying HOSTS file to blacklist $numberOf domain${plural}..."
if [[ -n $piholeIPv6 ]];then
cat $blacklist | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $adList
if [[ -n ${piholeIPv6} ]];then
cat ${blacklist} | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> ${adList}
else
cat $blacklist | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >>$adList
cat ${blacklist} | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >>${adList}
fi
fi
else
@ -169,10 +169,10 @@ function ModifyHostFile(){
#we need to remove the domains from the blacklist file and the host file
echo "::: $dom"
echo -n "::: removing from HOSTS file..."
echo "$dom" | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /[^.]'{}'(?!.)/;' $adList
echo "$dom" | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /[^.]'{}'(?!.)/;' ${adList}
echo " done!"
echo -n "::: removing from blackist.txt..."
echo "$dom" | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' $blacklist
echo "$dom" | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' ${blacklist}
echo " done!"
done
fi
@ -185,12 +185,12 @@ function Reload() {
dnsmasqPid=$(pidof dnsmasq)
if [[ $dnsmasqPid ]]; then
if [[ ${dnsmasqPid} ]]; then
# service already running - reload config
$SUDO killall -s HUP dnsmasq
${SUDO} killall -s HUP dnsmasq
else
# service not running, start it up
$SUDO service dnsmasq start
${SUDO} service dnsmasq start
fi
echo " done!"
}
@ -223,15 +223,15 @@ done
PopBlacklistFile
if $modifyHost || $force; then
if ${modifyHost} || ${force}; then
ModifyHostFile
else
if $verbose; then
if ${verbose}; then
echo "::: No changes need to be made"
fi
exit 1
fi
if $reload; then
if ${reload}; then
Reload
fi

View file

@ -21,7 +21,7 @@ function CalcBlockedDomains(){
CheckIPv6
if [ -e "$gravity" ]; then
#Are we IPV6 or IPV4?
if [[ -n $piholeIPv6 ]];then
if [[ -n ${piholeIPv6} ]];then
#We are IPV6
blockedDomainsTotal=$(wc -l /etc/pihole/gravity.list | awk '{print $1/2}')
else
@ -43,7 +43,7 @@ function CalcQueriesToday(){
function CalcblockedToday(){
if [ -e "$piLog" ] && [ -e "$gravity" ];then
blockedToday=$(cat $piLog | awk '/\/etc\/pihole\/gravity.list/ && !/address/ {print $6}' | wc -l)
blockedToday=$(cat ${piLog} | awk '/\/etc\/pihole\/gravity.list/ && !/address/ {print $6}' | wc -l)
else
blockedToday="Err."
fi
@ -63,7 +63,7 @@ function CalcPercentBlockedToday(){
function CheckIPv6(){
piholeIPv6file="/etc/pihole/.useIPv6"
if [[ -f $piholeIPv6file ]];then
if [[ -f ${piholeIPv6file} ]];then
# If the file exists, then the user previously chose to use IPv6 in the automated installer
piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
fi

View file

@ -10,9 +10,6 @@
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
# Nate Brandeburg
# nate@ubiquisoft.com
# 3/24/2016
######## GLOBAL VARS ########
DEBUG_LOG="/var/log/pihole_debug.log"
@ -46,75 +43,75 @@ fi
# Ensure the file exists, create if not, clear if exists.
if [ ! -f "$DEBUG_LOG" ]; then
$SUDO touch $DEBUG_LOG
$SUDO chmod 644 $DEBUG_LOG
$SUDO chown "$USER":root $DEBUG_LOG
${SUDO} touch ${DEBUG_LOG}
${SUDO} chmod 644 ${DEBUG_LOG}
${SUDO} chown "$USER":root ${DEBUG_LOG}
else
truncate -s 0 $DEBUG_LOG
truncate -s 0 ${DEBUG_LOG}
fi
### Private functions exist here ###
function versionCheck {
echo "#######################################" >> $DEBUG_LOG
echo "########## Versions Section ###########" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "########## Versions Section ###########" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
TMP=$(cd /etc/.pihole/ && git describe --tags --abbrev=0)
echo "Pi-hole Version: $TMP" >> $DEBUG_LOG
echo "Pi-hole Version: $TMP" >> ${DEBUG_LOG}
TMP=$(cd /var/www/html/admin && git describe --tags --abbrev=0)
echo "WebUI Version: $TMP" >> $DEBUG_LOG
echo >> $DEBUG_LOG
echo "WebUI Version: $TMP" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
}
function distroCheck {
echo "#######################################" >> $DEBUG_LOG
echo "######## Distribution Section #########" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "######## Distribution Section #########" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
TMP=$(cat /etc/*release/ || echo "Failed to find release")
echo "Distribution Version: $TMP" >> $DEBUG_LOG
TMP=$(cat /etc/*release || echo "Failed to find release")
echo "Distribution Version: $TMP" >> ${DEBUG_LOG}
}
function compareWhitelist {
if [ ! -f "$WHITELISTMATCHES" ]; then
$SUDO touch $WHITELISTMATCHES
$SUDO chmod 644 $WHITELISTMATCHES
$SUDO chown "$USER":root $WHITELISTMATCHES
${SUDO} touch ${WHITELISTMATCHES}
${SUDO} chmod 644 ${WHITELISTMATCHES}
${SUDO} chown "$USER":root ${WHITELISTMATCHES}
else
truncate -s 0 $WHITELISTMATCHES
truncate -s 0 ${WHITELISTMATCHES}
fi
echo "#######################################" >> $DEBUG_LOG
echo "######## Whitelist Comparison #########" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "######## Whitelist Comparison #########" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
while read -r line; do
TMP=$(grep -w ".* $line$" "$GRAVITYFILE")
if [ ! -z "$TMP" ]; then
echo "$TMP" >> $DEBUG_LOG
echo "$TMP" >> $WHITELISTMATCHES
echo "$TMP" >> ${DEBUG_LOG}
echo "$TMP" >> ${WHITELISTMATCHES}
fi
done < "$WHITELISTFILE"
echo >> $DEBUG_LOG
echo >> ${DEBUG_LOG}
}
function compareBlacklist {
echo "#######################################" >> $DEBUG_LOG
echo "######## Blacklist Comparison #########" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "######## Blacklist Comparison #########" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
while read -r line; do
if [ ! -z "$line" ]; then
grep -w ".* $line$" "$GRAVITYFILE" >> $DEBUG_LOG
grep -w ".* $line$" "$GRAVITYFILE" >> ${DEBUG_LOG}
fi
done < "$BLACKLISTFILE"
echo >> $DEBUG_LOG
echo >> ${DEBUG_LOG}
}
function testNslookup {
TESTURL="doubleclick.com"
echo "#######################################" >> $DEBUG_LOG
echo "############ NSLookup Test ############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "############ NSLookup Test ############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
# Find a blocked url that has not been whitelisted.
if [ -s "$WHITELISTMATCHES" ]; then
while read -r line; do
@ -131,77 +128,77 @@ function testNslookup {
done < "$GRAVITYFILE"
fi
echo "NSLOOKUP of $TESTURL from PiHole:" >> $DEBUG_LOG
nslookup "$TESTURL" >> $DEBUG_LOG
echo >> $DEBUG_LOG
echo "NSLOOKUP of $TESTURL from 8.8.8.8:" >> $DEBUG_LOG
nslookup "$TESTURL" 8.8.8.8 >> $DEBUG_LOG
echo >> $DEBUG_LOG
echo "NSLOOKUP of $TESTURL from PiHole:" >> ${DEBUG_LOG}
nslookup "$TESTURL" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
echo "NSLOOKUP of $TESTURL from 8.8.8.8:" >> ${DEBUG_LOG}
nslookup "$TESTURL" 8.8.8.8 >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
}
function checkProcesses {
echo "#######################################" >> $DEBUG_LOG
echo "########### Processes Check ###########" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "########### Processes Check ###########" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
echo ":::"
echo "::: Logging status of lighttpd and dnsmasq..."
PROCESSES=( lighttpd dnsmasq )
for i in "${PROCESSES[@]}"
do
echo "" >> $DEBUG_LOG
echo "" >> ${DEBUG_LOG}
echo -n "$i" >> "$DEBUG_LOG"
echo " processes status:" >> $DEBUG_LOG
$SUDO systemctl -l status "$i" >> "$DEBUG_LOG"
echo " processes status:" >> ${DEBUG_LOG}
${SUDO} systemctl -l status "$i" >> "$DEBUG_LOG"
done
}
function debugLighttpd {
echo "::: Writing lighttpd to debug log..."
echo "#######################################" >> $DEBUG_LOG
echo "############ lighttpd.conf ############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "############ lighttpd.conf ############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$LIGHTTPDFILE" ]
then
while read -r line; do
if [ ! -z "$line" ]; then
[[ "$line" =~ ^#.*$ ]] && continue
echo "$line" >> $DEBUG_LOG
echo "$line" >> ${DEBUG_LOG}
fi
done < "$LIGHTTPDFILE"
echo >> $DEBUG_LOG
echo >> ${DEBUG_LOG}
else
echo "No lighttpd.conf file found!" >> $DEBUG_LOG
echo "No lighttpd.conf file found!" >> ${DEBUG_LOG}
printf ":::\tNo lighttpd.conf file found\n"
fi
if [ -e "$LIGHTTPDERRFILE" ]
then
echo "#######################################" >> $DEBUG_LOG
echo "######### lighttpd error.log ##########" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
cat "$LIGHTTPDERRFILE" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "######### lighttpd error.log ##########" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
cat "$LIGHTTPDERRFILE" >> ${DEBUG_LOG}
else
echo "No lighttpd error.log file found!" >> $DEBUG_LOG
echo "No lighttpd error.log file found!" >> ${DEBUG_LOG}
printf ":::\tNo lighttpd error.log file found\n"
fi
echo >> $DEBUG_LOG
echo >> ${DEBUG_LOG}
}
### END FUNCTIONS ###
### Check Pi internet connections ###
# Log the IP addresses of this Pi
IPADDR=$($SUDO ifconfig | perl -nle 's/dr:(\S+)/print $1/e')
IPADDR=$(${SUDO} ifconfig | perl -nle 's/dr:(\S+)/print $1/e')
echo "::: Writing local IPs to debug log"
echo "IP Addresses of this Pi:" >> $DEBUG_LOG
echo "$IPADDR" >> $DEBUG_LOG
echo >> $DEBUG_LOG
echo "IP Addresses of this Pi:" >> ${DEBUG_LOG}
echo "$IPADDR" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
# Check if we can connect to the local gateway
GATEWAY_CHECK=$(ping -q -w 1 -c 1 "$(ip r | grep default | cut -d ' ' -f 3)" > /dev/null && echo ok || echo error)
echo "Gateway check:" >> $DEBUG_LOG
echo "$GATEWAY_CHECK" >> $DEBUG_LOG
echo >> $DEBUG_LOG
echo "Gateway check:" >> ${DEBUG_LOG}
echo "$GATEWAY_CHECK" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
versionCheck
distroCheck
@ -212,109 +209,109 @@ checkProcesses
debugLighttpd
echo "::: Writing dnsmasq.conf to debug log..."
echo "#######################################" >> $DEBUG_LOG
echo "############### Dnsmasq ###############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "############### Dnsmasq ###############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$DNSMASQFILE" ]
then
#cat $DNSMASQFILE >> $DEBUG_LOG
while read -r line; do
if [ ! -z "$line" ]; then
[[ "$line" =~ ^#.*$ ]] && continue
echo "$line" >> $DEBUG_LOG
echo "$line" >> ${DEBUG_LOG}
fi
done < "$DNSMASQFILE"
echo >> $DEBUG_LOG
echo >> ${DEBUG_LOG}
else
echo "No dnsmasq.conf file found!" >> $DEBUG_LOG
echo "No dnsmasq.conf file found!" >> ${DEBUG_LOG}
printf ":::\tNo dnsmasq.conf file found!\n"
fi
echo "::: Writing 01-pihole.conf to debug log..."
echo "#######################################" >> $DEBUG_LOG
echo "########### 01-pihole.conf ############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "########### 01-pihole.conf ############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$PIHOLECONFFILE" ]
then
while read -r line; do
if [ ! -z "$line" ]; then
[[ "$line" =~ ^#.*$ ]] && continue
echo "$line" >> $DEBUG_LOG
echo "$line" >> ${DEBUG_LOG}
fi
done < "$PIHOLECONFFILE"
echo >> $DEBUG_LOG
echo >> ${DEBUG_LOG}
else
echo "No 01-pihole.conf file found!" >> $DEBUG_LOG
echo "No 01-pihole.conf file found!" >> ${DEBUG_LOG}
printf ":::\tNo 01-pihole.conf file found\n"
fi
echo "::: Writing size of gravity.list to debug log..."
echo "#######################################" >> $DEBUG_LOG
echo "############ gravity.list #############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "############ gravity.list #############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$GRAVITYFILE" ]
then
wc -l "$GRAVITYFILE" >> $DEBUG_LOG
echo >> $DEBUG_LOG
wc -l "$GRAVITYFILE" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
else
echo "No gravity.list file found!" >> $DEBUG_LOG
echo "No gravity.list file found!" >> ${DEBUG_LOG}
printf ":::\tNo gravity.list file found\n"
fi
# Write the hostname output to compare against entries in /etc/hosts, which is logged next
echo "Hostname of this pihole is: " >> $DEBUG_LOG
hostname >> $DEBUG_LOG
echo "Hostname of this pihole is: " >> ${DEBUG_LOG}
hostname >> ${DEBUG_LOG}
echo "::: Writing hosts file to debug log..."
echo "#######################################" >> $DEBUG_LOG
echo "################ Hosts ################" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "################ Hosts ################" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$HOSTSFILE" ]
then
cat "$HOSTSFILE" >> $DEBUG_LOG
echo >> $DEBUG_LOG
cat "$HOSTSFILE" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
else
echo "No hosts file found!" >> $DEBUG_LOG
echo "No hosts file found!" >> ${DEBUG_LOG}
printf ":::\tNo hosts file found!\n"
fi
### PiHole application specific logging ###
echo "::: Writing whitelist to debug log..."
echo "#######################################" >> $DEBUG_LOG
echo "############## Whitelist ##############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "############## Whitelist ##############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$WHITELISTFILE" ]
then
cat "$WHITELISTFILE" >> $DEBUG_LOG
echo >> $DEBUG_LOG
cat "$WHITELISTFILE" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
else
echo "No whitelist.txt file found!" >> $DEBUG_LOG
echo "No whitelist.txt file found!" >> ${DEBUG_LOG}
printf ":::\tNo whitelist.txt file found!\n"
fi
echo "::: Writing blacklist to debug log..."
echo "#######################################" >> $DEBUG_LOG
echo "############## Blacklist ##############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "############## Blacklist ##############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$BLACKLISTFILE" ]
then
cat "$BLACKLISTFILE" >> $DEBUG_LOG
echo >> $DEBUG_LOG
cat "$BLACKLISTFILE" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
else
echo "No blacklist.txt file found!" >> $DEBUG_LOG
echo "No blacklist.txt file found!" >> ${DEBUG_LOG}
printf ":::\tNo blacklist.txt file found!\n"
fi
echo "::: Writing adlists.list to debug log..."
echo "#######################################" >> $DEBUG_LOG
echo "############ adlists.list #############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "############ adlists.list #############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$ADLISTSFILE" ]
then
cat "$ADLISTSFILE" >> $DEBUG_LOG
echo >> $DEBUG_LOG
cat "$ADLISTSFILE" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
else
echo "No adlists.list file found... using adlists.default!" >> $DEBUG_LOG
echo "No adlists.list file found... using adlists.default!" >> ${DEBUG_LOG}
printf ":::\tNo adlists.list file found... using adlists.default!\n"
fi
@ -323,17 +320,17 @@ fi
function dumpPiHoleLog {
trap '{ echo -e "\n::: Finishing debug write from interrupt... Quitting!" ; exit 1; }' INT
echo -e "::: Writing current pihole traffic to debug log...\n:::\tTry loading any/all sites that you are having trouble with now... \n:::\t(Press ctrl+C to finish)"
echo "#######################################" >> $DEBUG_LOG
echo "############# pihole.log ##############" >> $DEBUG_LOG
echo "#######################################" >> $DEBUG_LOG
echo "#######################################" >> ${DEBUG_LOG}
echo "############# pihole.log ##############" >> ${DEBUG_LOG}
echo "#######################################" >> ${DEBUG_LOG}
if [ -e "$PIHOLELOG" ]
then
while true; do
tail -f "$PIHOLELOG" >> $DEBUG_LOG
echo >> $DEBUG_LOG
tail -f "$PIHOLELOG" >> ${DEBUG_LOG}
echo >> ${DEBUG_LOG}
done
else
echo "No pihole.log file found!" >> $DEBUG_LOG
echo "No pihole.log file found!" >> ${DEBUG_LOG}
printf ":::\tNo pihole.log file found!\n"
fi
}
@ -341,7 +338,16 @@ function dumpPiHoleLog {
# Anything to be done after capturing of pihole.log terminates
function finalWork {
echo "::: Finshed debugging!"
echo "::: The degug log can be uploaded to Termbin.com for easier sharing."
read -r -p "::: Would you like to upload the log? [y/N] " response
case ${response} in
[yY][eE][sS]|[yY])
TERMBIN=$(cat /var/log/pihole_debug.log | nc termbin.com 9999)
;;
*)
echo "::: Log will NOT be uploaded to Termbin."
;;
esac
# Check if termbin.com is reachable. When it's not, point to local log instead
if [ -n "$TERMBIN" ]
@ -351,6 +357,7 @@ function finalWork {
echo "::: Debug log can be found at : /var/log/pihole_debug.log"
fi
}
trap finalWork EXIT
### Method calls for additional logging ###

View file

@ -44,12 +44,12 @@ getInitSys() {
# https://github.com/adafruit/Adafruit-PiTFT-Helper/blob/master/adafruit-pitft-helper#L274-L285
autoLoginPiToConsole() {
if [ -e /etc/init.d/lightdm ]; then
if [ $SYSTEMD -eq 1 ]; then
$SUDO systemctl set-default multi-user.target
$SUDO ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
if [ ${SYSTEMD} -eq 1 ]; then
${SUDO} systemctl set-default multi-user.target
${SUDO} ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
else
$SUDO update-rc.d lightdm disable 2
$SUDO sed /etc/inittab -i -e "s/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/"
${SUDO} update-rc.d lightdm disable 2
${SUDO} sed /etc/inittab -i -e "s/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/"
fi
fi
}
@ -66,23 +66,23 @@ echo /usr/local/bin/chronometer.sh >> /home/pi/.bashrc
# Set up the LCD screen based on Adafruits instuctions:
# https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/easy-install
curl -SLs https://apt.adafruit.com/add-pin | $SUDO bash
$SUDO apt-get -y install raspberrypi-bootloader
$SUDO apt-get -y install adafruit-pitft-helper
$SUDO adafruit-pitft-helper -t 28r
curl -SLs https://apt.adafruit.com/add-pin | ${SUDO} bash
${SUDO} apt-get -y install raspberrypi-bootloader
${SUDO} apt-get -y install adafruit-pitft-helper
${SUDO} adafruit-pitft-helper -t 28r
# Download the cmdline.txt file that prevents the screen from going blank after a period of time
$SUDO mv /boot/cmdline.txt /boot/cmdline.orig
$SUDO curl -o /boot/cmdline.txt https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/cmdline.txt
${SUDO} mv /boot/cmdline.txt /boot/cmdline.orig
${SUDO} curl -o /boot/cmdline.txt https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/cmdline.txt
# Back up the original file and download the new one
$SUDO mv /etc/default/console-setup /etc/default/console-setup.orig
$SUDO curl -o /etc/default/console-setup https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/console-setup
${SUDO} mv /etc/default/console-setup /etc/default/console-setup.orig
${SUDO} curl -o /etc/default/console-setup https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/console-setup
# Instantly apply the font change to the LCD screen
$SUDO setupcon
${SUDO} setupcon
$SUDO reboot
${SUDO} reboot
# Start showing the stats on the screen by running the command on another tty:
# http://unix.stackexchange.com/questions/170063/start-a-process-on-a-different-tty

View file

@ -55,7 +55,7 @@ is_repo() {
# replaces it with the current master branch from github
make_repo() {
# remove the non-repod interface and clone the interface
rm -rf $WEB_INTERFACE_DIR
rm -rf ${WEB_INTERFACE_DIR}
git clone "$WEB_INTERFACE_GIT_URL" "$WEB_INTERFACE_DIR"
}

View file

@ -0,0 +1,20 @@
#!/usr/bin/env bash
# Pi-hole: A black hole for Internet advertisements
# (c) 2015, 2016 by Jacob Salmela
# Network-wide ad blocking via your Raspberry Pi
# http://pi-hole.net
# Whitelists domains
#
# Pi-hole is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
piholeVersion=$(cd /etc/.pihole/ && git describe --tags --abbrev=0)
webVersion=$(cd /var/www/html/admin/ && git describe --tags --abbrev=0)
piholeVersionLatest=$(curl -s https://api.github.com/repos/pi-hole/pi-hole/releases/latest | grep -Po '"tag_name":.*?[^\\]",' | perl -pe 's/"tag_name": "//; s/^"//; s/",$//')
webVersionLatest=$(curl -s https://api.github.com/repos/pi-hole/AdminLTE/releases/latest | grep -Po '"tag_name":.*?[^\\]",' | perl -pe 's/"tag_name": "//; s/^"//; s/",$//')
echo "::: Pi-hole version is $piholeVersion (Latest version is $piholeVersionLatest)"
echo "::: Web-Admin version is $webVersion (Latest version is $webVersionLatest)"

View file

@ -47,9 +47,9 @@ fi
#globals
basename=pihole
piholeDir=/etc/$basename
adList=$piholeDir/gravity.list
whitelist=$piholeDir/whitelist.txt
piholeDir=/etc/${basename}
adList=${piholeDir}/gravity.list
whitelist=${piholeDir}/whitelist.txt
reload=true
addmode=true
force=false
@ -61,9 +61,9 @@ domToRemoveList=()
piholeIPfile=/etc/pihole/piholeIP
piholeIPv6file=/etc/pihole/.useIPv6
if [[ -f $piholeIPfile ]];then
if [[ -f ${piholeIPfile} ]];then
# If the file exists, it means it was exported from the installation script and we should use that value instead of detecting it in this script
piholeIP=$(cat $piholeIPfile)
piholeIP=$(cat ${piholeIPfile})
#rm $piholeIPfile
else
# Otherwise, the IP address can be taken directly from the machine, which will happen when the script is run by the user and not the installation script
@ -75,12 +75,12 @@ fi
modifyHost=false
# After setting defaults, check if there's local overrides
if [[ -r $piholeDir/pihole.conf ]];then
if [[ -r ${piholeDir}/pihole.conf ]];then
echo "::: Local calibration requested..."
. $piholeDir/pihole.conf
. ${piholeDir}/pihole.conf
fi
if [[ -f $piholeIPv6file ]];then
if [[ -f ${piholeIPv6file} ]];then
# If the file exists, then the user previously chose to use IPv6 in the automated installer
piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
fi
@ -91,18 +91,18 @@ function HandleOther(){
if [ -z "$validDomain" ]; then
echo "::: $1 is not a valid argument or domain name"
else
domList=("${domList[@]}" $validDomain)
domList=("${domList[@]}" ${validDomain})
fi
}
function PopWhitelistFile(){
#check whitelist file exists, and if not, create it
if [[ ! -f $whitelist ]];then
touch $whitelist
if [[ ! -f ${whitelist} ]];then
touch ${whitelist}
fi
for dom in "${domList[@]}"
do
if $addmode; then
if ${addmode}; then
AddDomain "$dom"
else
RemoveDomain "$dom"
@ -114,19 +114,19 @@ function AddDomain(){
#| sed 's/\./\\./g'
bool=false
grep -Ex -q "$1" $whitelist || bool=true
if $bool; then
grep -Ex -q "$1" ${whitelist} || bool=true
if ${bool}; then
#domain not found in the whitelist file, add it!
if $verbose; then
if ${verbose}; then
echo -n "::: Adding $1 to $whitelist..."
fi
echo "$1" >> $whitelist
echo "$1" >> ${whitelist}
modifyHost=true
if $verbose; then
if ${verbose}; then
echo " done!"
fi
else
if $verbose; then
if ${verbose}; then
echo "::: $1 already exists in $whitelist, no need to add!"
fi
fi
@ -135,10 +135,10 @@ function AddDomain(){
function RemoveDomain(){
bool=false
grep -Ex -q "$1" $whitelist || bool=true
if $bool; then
grep -Ex -q "$1" ${whitelist} || bool=true
if ${bool}; then
#Domain is not in the whitelist file, no need to Remove
if $verbose; then
if ${verbose}; then
echo "::: $1 is NOT whitelisted! No need to remove"
fi
else
@ -152,21 +152,21 @@ function RemoveDomain(){
}
function ModifyHostFile(){
if $addmode; then
if ${addmode}; then
#remove domains in from hosts file
if [[ -r $whitelist ]];then
if [[ -r ${whitelist} ]];then
# Remove whitelist entries
numberOf=$(cat $whitelist | sed '/^\s*$/d' | wc -l)
numberOf=$(cat ${whitelist} | sed '/^\s*$/d' | wc -l)
plural=; [[ "$numberOf" != "1" ]] && plural=s
echo ":::"
echo -n "::: Modifying HOSTS file to whitelist $numberOf domain${plural}..."
awk -F':' '{print $1}' $whitelist | while read -r line; do echo "$piholeIP $line"; done > /etc/pihole/whitelist.tmp
awk -F':' '{print $1}' $whitelist | while read -r line; do echo "$piholeIPv6 $line"; done >> /etc/pihole/whitelist.tmp
awk -F':' '{print $1}' ${whitelist} | while read -r line; do echo "$piholeIP $line"; done > /etc/pihole/whitelist.tmp
awk -F':' '{print $1}' ${whitelist} | while read -r line; do echo "$piholeIPv6 $line"; done >> /etc/pihole/whitelist.tmp
echo "l" >> /etc/pihole/whitelist.tmp
grep -F -x -v -f $piholeDir/whitelist.tmp $adList > $piholeDir/gravity.tmp
rm $adList
mv $piholeDir/gravity.tmp $adList
rm $piholeDir/whitelist.tmp
grep -F -x -v -f ${piholeDir}/whitelist.tmp ${adList} > ${piholeDir}/gravity.tmp
rm ${adList}
mv ${piholeDir}/gravity.tmp ${adList}
rm ${piholeDir}/whitelist.tmp
echo " done!"
fi
@ -176,17 +176,20 @@ function ModifyHostFile(){
echo "::: Modifying HOSTS file to un-whitelist domains..."
for rdom in "${domToRemoveList[@]}"
do
if [[ -n $piholeIPv6 ]];then
echo -n "::: Un-whitelisting $rdom on IPv4 and IPv6..."
echo "$rdom" | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $adList
if grep -q "$rdom" /etc/pihole/*.domains; then
echo "::: AdLists contain $rdom, re-adding block"
if [[ -n ${piholeIPv6} ]];then
echo -n "::: Restoring block for $rdom on IPv4 and IPv6..."
echo "$rdom" | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> ${adList}
echo " done!"
else
echo -n "::: Un-whitelisting $rdom on IPv4"
echo "$rdom" | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >>$adList
echo -n "::: Restoring block for $rdom on IPv4..."
echo "$rdom" | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >>${adList}
echo " done!"
fi
fi
echo -n "::: Removing $rdom from $whitelist..."
echo "$rdom" | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' $whitelist
echo "$rdom" | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' ${whitelist}
echo " done!"
done
fi
@ -198,12 +201,12 @@ function Reload() {
echo -n "::: Refresh lists in dnsmasq..."
dnsmasqPid=$(pidof dnsmasq)
if [[ $dnsmasqPid ]]; then
if [[ ${dnsmasqPid} ]]; then
# service already running - reload config
$SUDO killall -s HUP dnsmasq
${SUDO} killall -s HUP dnsmasq
else
# service not running, start it up
$SUDO service dnsmasq start
${SUDO} service dnsmasq start
fi
echo " done!"
}
@ -236,16 +239,16 @@ done
PopWhitelistFile
if $modifyHost || $force; then
if ${modifyHost} || ${force}; then
ModifyHostFile
else
if $verbose; then
if ${verbose}; then
echo ":::"
echo "::: No changes need to be made"
fi
exit 1
fi
if $reload; then
if ${reload}; then
Reload
fi

View file

@ -1,4 +1,7 @@
<html>
<head>
<script>window.close();</script>
</head>
<body>
</body>
</html>

View file

@ -19,14 +19,17 @@
######## VARIABLES #########
tmpLog=/tmp/pihole-install.log
instalLogLoc=/etc/pihole/install.log
setupVars=/etc/pihole/setupVars.conf
webInterfaceGitUrl="https://github.com/pi-hole/AdminLTE.git"
webInterfaceDir="/var/www/html/admin"
piholeGitUrl="https://github.com/pi-hole/pi-hole.git"
piholeFilesDir="/etc/.pihole"
useUpdateVars=false
# Find the rows and columns
rows=$(tput lines)
@ -53,7 +56,7 @@ else
fi
fi
# Compatability
# Compatibility
if [ -x "$(command -v rpm)" ];then
# Fedora Family
if [ -x "$(command -v dnf)" ];then
@ -67,7 +70,7 @@ if [ -x "$(command -v rpm)" ];then
PKG_INSTALL="$PKG_MANAGER install -y"
PKG_COUNT="$PKG_MANAGER check-update | grep -v ^Last | grep -c ^[a-zA-Z0-9]"
INSTALLER_DEPS=( iproute net-tools procps-ng newt )
PIHOLE_DEPS=( epel-release bind-utils bc dnsmasq lighttpd lighttpd-fastcgi php-common php-cli php git curl unzip wget findutils cronie sudo netcat )
PIHOLE_DEPS=( epel-release bind-utils bc dnsmasq lighttpd lighttpd-fastcgi php-common php-cli php git curl unzip wget findutils cronie sudo nmap-ncat )
LIGHTTPD_USER="lighttpd"
LIGHTTPD_GROUP="lighttpd"
LIGHTTPD_CFG="lighttpd.conf.fedora"
@ -104,8 +107,8 @@ spinner()
while [ "$(ps a | awk '{print $1}' | grep "$pid")" ]; do
local temp=${spinstr#?}
printf " [%c] " "$spinstr"
local spinstr=$temp${spinstr%"$temp"}
sleep $delay
local spinstr=${temp}${spinstr%"$temp"}
sleep ${delay}
printf "\b\b\b\b\b\b"
done
printf " \b\b\b\b"
@ -119,69 +122,64 @@ findIPRoute() {
availableInterfaces=$(ip -o link | awk '{print $2}' | grep -v "lo" | cut -d':' -f1 | cut -d'@' -f1)
}
backupLegacyPihole() {
# This function detects and backups the pi-hole v1 files. It will not do anything to the current version files.
if [[ -f /etc/dnsmasq.d/adList.conf ]];then
echo "::: Original Pi-hole detected. Initiating sub space transport"
$SUDO mkdir -p /etc/pihole/original/
$SUDO mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf."$(date "+%Y-%m-%d")"
$SUDO mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf."$(date "+%Y-%m-%d")"
$SUDO mv /etc/resolv.conf /etc/pihole/original/resolv.conf."$(date "+%Y-%m-%d")"
$SUDO mv /etc/lighttpd/lighttpd.conf /etc/pihole/original/lighttpd.conf."$(date "+%Y-%m-%d")"
$SUDO mv /var/www/pihole/index.html /etc/pihole/original/index.html."$(date "+%Y-%m-%d")"
if [ ! -d /opt/pihole ]; then
$SUDO mkdir /opt/pihole
$SUDO chown "$USER":root /opt/pihole
$SUDO chmod u+srwx /opt/pihole
fi
$SUDO mv /opt/pihole/gravity.sh /etc/pihole/original/gravity.sh."$(date "+%Y-%m-%d")"
else
:
fi
}
welcomeDialogs() {
# Display the welcome dialog
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" ${r} ${c}
# Support for a part-time dev
whiptail --msgbox --backtitle "Plea" --title "Free and open source" "The Pi-hole is free, but powered by your donations: http://pi-hole.net/donate" $r $c
whiptail --msgbox --backtitle "Plea" --title "Free and open source" "The Pi-hole is free, but powered by your donations: http://pi-hole.net/donate" ${r} ${c}
# Explain the need for a static address
whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
whiptail --msgbox --backtitle "Initiating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." ${r} ${c}
}
verifyFreeDiskSpace() {
# 50MB is the minimum space needed (45MB install (includes web admin bootstrap/jquery libraries etc) + 5MB one day of logs.)
requiredFreeBytes=51200
existingFreeBytes=$(df -lk / 2>&1 | awk '{print $4}' | head -2 | tail -1)
if ! [[ "$existingFreeBytes" =~ ^([0-9])+$ ]]; then
existingFreeBytes=$(df -lk /dev 2>&1 | awk '{print $4}' | head -2 | tail -1)
# 50MB is the minimum space needed (45MB install (includes web admin bootstrap/jquery libraries etc) + 5MB one day of logs.)
# - Fourdee: Local ensures the variable is only created, and accessible within this function/void. Generally considered a "good" coding practice for non-global variables.
local required_free_kilobytes=51200
local existing_free_kilobytes=$(df -Pk | grep -m1 '\/$' | awk '{print $4}')
# - Unknown free disk space , not a integer
if ! [[ "$existing_free_kilobytes" =~ ^([0-9])+$ ]]; then
whiptail --title "Unknown free disk space" --yesno "We were unable to determine available free disk space on this system.\n\nYou may override this check and force the installation, however, it is not recommended.\n\nWould you like to continue with the installation?" --defaultno --backtitle "Pi-hole" ${r} ${c}
local choice=$?
if (( $choice != 0 )); then
echo "non-integer value from existing_free_kilobytes ($existing_free_kilobytes)"
echo "Unknown free space, user aborted, exiting..."
exit 1
fi
if [[ $existingFreeBytes -lt $requiredFreeBytes ]]; then
whiptail --msgbox --backtitle "Insufficient Disk Space" --title "Insufficient Disk Space" "\nYour system appears to be low on disk space. pi-hole recomends a minimum of $requiredFreeBytes Bytes.\nYou only have $existingFreeBytes Free.\n\nIf this is a new install you may need to expand your disk.\n\nTry running:\n 'sudo raspi-config'\nChoose the 'expand file system option'\n\nAfter rebooting, run this installation again.\n\ncurl -L install.pi-hole.net | bash\n" $r $c
echo "$existingFreeBytes is less than $requiredFreeBytes"
# - Insufficient free disk space
elif [[ $existing_free_kilobytes -lt $required_free_kilobytes ]]; then
whiptail --msgbox --backtitle "Insufficient Disk Space" --title "Insufficient Disk Space" "\nYour system appears to be low on disk space. pi-hole recomends a minimum of $required_free_kilobytes KiloBytes.\nYou only have $existing_free_kilobytes KiloBytes free.\n\nIf this is a new install you may need to expand your disk.\n\nTry running:\n 'sudo raspi-config'\nChoose the 'expand file system option'\n\nAfter rebooting, run this installation again.\n\ncurl -L install.pi-hole.net | bash\n" $r $c
echo "$existing_free_kilobytes is less than $required_free_kilobytes"
echo "Insufficient free space, exiting..."
exit 1
fi
}
chooseInterface() {
# Turn the available interfaces into an array so it can be used with a whiptail dialog
interfacesArray=()
firstloop=1
firstLoop=1
while read -r line
do
mode="OFF"
if [[ $firstloop -eq 1 ]]; then
firstloop=0
if [[ ${firstLoop} -eq 1 ]]; then
firstLoop=0
mode="ON"
fi
interfacesArray+=("$line" "available" "$mode")
@ -189,12 +187,12 @@ chooseInterface() {
# Find out how many interfaces are available to choose from
interfaceCount=$(echo "$availableInterfaces" | wc -l)
chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" $r $c $interfaceCount)
chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" ${r} ${c} ${interfaceCount})
chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty)
if [[ $? = 0 ]]; then
for desiredInterface in $chooseInterfaceOptions
for desiredInterface in ${chooseInterfaceOptions}
do
piholeInterface=$desiredInterface
piholeInterface=${desiredInterface}
echo "::: Using interface: $piholeInterface"
echo "${piholeInterface}" > /tmp/piholeINT
done
@ -214,38 +212,38 @@ cleanupIPv6() {
use4andor6() {
# Let use select IPv4 and/or IPv6
cmd=(whiptail --separate-output --checklist "Select Protocols (press space to select)" $r $c 2)
cmd=(whiptail --separate-output --checklist "Select Protocols (press space to select)" ${r} ${c} 2)
options=(IPv4 "Block ads over IPv4" on
IPv6 "Block ads over IPv6" off)
choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty)
if [[ $? = 0 ]];then
for choice in $choices
for choice in ${choices}
do
case $choice in
case ${choice} in
IPv4 ) useIPv4=true;;
IPv6 ) useIPv6=true;;
esac
done
if [ $useIPv4 ] && [ ! $useIPv6 ]; then
if [ ${useIPv4} ] && [ ! ${useIPv6} ]; then
getStaticIPv4Settings
setStaticIPv4
echo "::: Using IPv4 on $IPv4addr"
echo "::: IPv6 will NOT be used."
fi
if [ ! $useIPv4 ] && [ $useIPv6 ]; then
if [ ! ${useIPv4} ] && [ ${useIPv6} ]; then
useIPv6dialog
echo "::: IPv4 will NOT be used."
echo "::: Using IPv6 on $piholeIPv6"
fi
if [ $useIPv4 ] && [ $useIPv6 ]; then
if [ ${useIPv4} ] && [ ${useIPv6} ]; then
getStaticIPv4Settings
setStaticIPv4
useIPv6dialog
echo "::: Using IPv4 on $IPv4addr"
echo "::: Using IPv6 on $piholeIPv6"
fi
if [ ! $useIPv4 ] && [ ! $useIPv6 ]; then
if [ ! ${useIPv4} ] && [ ! ${useIPv6} ]; then
echo "::: Cannot continue, neither IPv4 or IPv6 selected"
echo "::: Exiting"
exit 1
@ -260,41 +258,41 @@ use4andor6() {
useIPv6dialog() {
# Show the IPv6 address used for blocking
piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$piholeIPv6 will be used to block ads." $r $c
whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$piholeIPv6 will be used to block ads." ${r} ${c}
$SUDO touch /etc/pihole/.useIPv6
${SUDO} touch /etc/pihole/.useIPv6
}
getStaticIPv4Settings() {
# Ask if the user wants to use DHCP settings as their static IP
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
IP address: $IPv4addr
Gateway: $IPv4gw" $r $c) then
Gateway: $IPv4gw" ${r} ${c}); then
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." ${r} ${c}
#piholeIP is saved to a permanent file so gravity.sh can use it when updating
$SUDO echo "${IPv4addr%/*}" > /etc/pihole/piholeIP
${SUDO} echo "${IPv4addr%/*}" > /etc/pihole/piholeIP
# Nothing else to do since the variables are already set above
else
# Otherwise, we need to ask the user to input their desired settings.
# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
until [[ $ipSettingsCorrect = True ]]
until [[ ${ipSettingsCorrect} = True ]]
do
# Ask for the IPv4 address
IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c "$IPv4addr" 3>&1 1>&2 2>&3)
IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" ${r} ${c} "$IPv4addr" 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "::: Your static IPv4 address: $IPv4addr"
# Ask for the gateway
IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c "$IPv4gw" 3>&1 1>&2 2>&3)
IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" ${r} ${c} "$IPv4gw" 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "::: Your static IPv4 gateway: $IPv4gw"
# Give the user a chance to review their settings before moving on
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
IP address: $IPv4addr
Gateway: $IPv4gw" $r $c)then
Gateway: $IPv4gw" ${r} ${c}); then
# If the settings are correct, then we need to set the piholeIP
# Saving it to a temporary file us to retrieve it later when we run the gravity.sh script. piholeIP is saved to a permanent file so gravity.sh can use it when updating
$SUDO echo "${IPv4addr%/*}" > /etc/pihole/piholeIP
@ -324,10 +322,10 @@ It is also possible to use a DHCP reservation, but if you are going to do that,
setDHCPCD() {
# Append these lines to dhcpcd.conf to enable a static IP
echo "::: interface $piholeInterface
echo "## interface $piholeInterface
static ip_address=$IPv4addr
static routers=$IPv4gw
static domain_name_servers=$IPv4gw" | $SUDO tee -a /etc/dhcpcd.conf >/dev/null
static domain_name_servers=$IPv4gw" | ${SUDO} tee -a /etc/dhcpcd.conf >/dev/null
}
setStaticIPv4() {
@ -337,33 +335,33 @@ setStaticIPv4() {
echo "::: Static IP already configured"
else
setDHCPCD
$SUDO ip addr replace dev "$piholeInterface" "$IPv4addr"
${SUDO} ip addr replace dev "$piholeInterface" "$IPv4addr"
echo ":::"
echo "::: Setting IP to $IPv4addr. You may need to restart after the install is complete."
echo ":::"
fi
elif [[ -f /etc/sysconfig/network-scripts/ifcfg-$piholeInterface ]];then
elif [[ -f /etc/sysconfig/network-scripts/ifcfg-${piholeInterface} ]];then
# Fedora Family
IFCFG_FILE=/etc/sysconfig/network-scripts/ifcfg-$piholeInterface
if grep -q "$IPv4addr" $IFCFG_FILE; then
IFCFG_FILE=/etc/sysconfig/network-scripts/ifcfg-${piholeInterface}
if grep -q "$IPv4addr" ${IFCFG_FILE}; then
echo "::: Static IP already configured"
else
IPADDR=$(echo $IPv4addr | cut -f1 -d/)
CIDR=$(echo $IPv4addr | cut -f2 -d/)
IPADDR=$(echo ${IPv4addr} | cut -f1 -d/)
CIDR=$(echo ${IPv4addr} | cut -f2 -d/)
# Backup existing interface configuration:
cp $IFCFG_FILE $IFCFG_FILE.backup-$(date +%Y-%m-%d-%H%M%S)
cp ${IFCFG_FILE} ${IFCFG_FILE}.backup-$(date +%Y-%m-%d-%H%M%S)
# Build Interface configuration file:
$SUDO echo "# Configured via Pi-Hole installer" > $IFCFG_FILE
$SUDO echo "DEVICE=$piholeInterface" >> $IFCFG_FILE
$SUDO echo "BOOTPROTO=none" >> $IFCFG_FILE
$SUDO echo "ONBOOT=yes" >> $IFCFG_FILE
$SUDO echo "IPADDR=$IPADDR" >> $IFCFG_FILE
$SUDO echo "PREFIX=$CIDR" >> $IFCFG_FILE
$SUDO echo "USERCTL=no" >> $IFCFG_FILE
$SUDO ip addr replace dev "$piholeInterface" "$IPv4addr"
${SUDO} echo "# Configured via Pi-Hole installer" > ${IFCFG_FILE}
${SUDO} echo "DEVICE=$piholeInterface" >> ${IFCFG_FILE}
${SUDO} echo "BOOTPROTO=none" >> ${IFCFG_FILE}
${SUDO} echo "ONBOOT=yes" >> ${IFCFG_FILE}
${SUDO} echo "IPADDR=$IPADDR" >> ${IFCFG_FILE}
${SUDO} echo "PREFIX=$CIDR" >> ${IFCFG_FILE}
${SUDO} echo "USERCTL=no" >> ${IFCFG_FILE}
${SUDO} ip addr replace dev "$piholeInterface" "$IPv4addr"
if [ -x "$(command -v nmcli)" ];then
# Tell NetworkManager to read our new sysconfig file
$SUDO nmcli con load $IFCFG_FILE > /dev/null
${SUDO} nmcli con load ${IFCFG_FILE} > /dev/null
fi
echo ":::"
echo "::: Setting IP to $IPv4addr. You may need to restart after the install is complete."
@ -381,20 +379,20 @@ function valid_ip()
local ip=$1
local stat=1
if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
if [[ ${ip} =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
OIFS=$IFS
IFS='.'
ip=($ip)
IFS=$OIFS
ip=(${ip})
IFS=${OIFS}
[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
&& ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
stat=$?
fi
return $stat
return ${stat}
}
setDNS(){
DNSChoseCmd=(whiptail --separate-output --radiolist "Select Upstream DNS Provider. To use your own, select Custom." $r $c 6)
DNSChoseCmd=(whiptail --separate-output --radiolist "Select Upstream DNS Provider. To use your own, select Custom." ${r} ${c} 6)
DNSChooseOptions=(Google "" on
OpenDNS "" off
Level3 "" off
@ -403,7 +401,7 @@ setDNS(){
Custom "" off)
DNSchoices=$("${DNSChoseCmd[@]}" "${DNSChooseOptions[@]}" 2>&1 >/dev/tty)
if [[ $? = 0 ]];then
case $DNSchoices in
case ${DNSchoices} in
Google)
echo "::: Using Google DNS servers."
piholeDNS1="8.8.8.8"
@ -430,45 +428,45 @@ setDNS(){
piholeDNS2="8.20.247.20"
;;
Custom)
until [[ $DNSSettingsCorrect = True ]]
until [[ ${DNSSettingsCorrect} = True ]]
do
strInvalid="Invalid"
if [ ! $piholeDNS1 ]; then
if [ ! $piholeDNS2 ]; then
if [ ! ${piholeDNS1} ]; then
if [ ! ${piholeDNS2} ]; then
prePopulate=""
else
prePopulate=", $piholeDNS2"
fi
elif [ $piholeDNS1 ] && [ ! $piholeDNS2 ]; then
elif [ ${piholeDNS1} ] && [ ! ${piholeDNS2} ]; then
prePopulate="$piholeDNS1"
elif [ $piholeDNS1 ] && [ $piholeDNS2 ]; then
elif [ ${piholeDNS1} ] && [ ${piholeDNS2} ]; then
prePopulate="$piholeDNS1, $piholeDNS2"
fi
piholeDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)" --inputbox "Enter your desired upstream DNS provider(s), seperated by a comma.\n\nFor example '8.8.8.8, 8.8.4.4'" $r $c "$prePopulate" 3>&1 1>&2 2>&3)
piholeDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)" --inputbox "Enter your desired upstream DNS provider(s), seperated by a comma.\n\nFor example '8.8.8.8, 8.8.4.4'" ${r} ${c} "$prePopulate" 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
piholeDNS1=$(echo "$piholeDNS" | sed 's/[, \t]\+/,/g' | awk -F, '{print$1}')
piholeDNS2=$(echo "$piholeDNS" | sed 's/[, \t]\+/,/g' | awk -F, '{print$2}')
if ! valid_ip "$piholeDNS1" || [ ! "$piholeDNS1" ]; then
piholeDNS1=$strInvalid
piholeDNS1=${strInvalid}
fi
if ! valid_ip "$piholeDNS2" && [ "$piholeDNS2" ]; then
piholeDNS2=$strInvalid
piholeDNS2=${strInvalid}
fi
else
echo "::: Cancel selected, exiting...."
exit 1
fi
if [[ $piholeDNS1 == "$strInvalid" ]] || [[ $piholeDNS2 == "$strInvalid" ]]; then
whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\n\n DNS Server 1: $piholeDNS1\n DNS Server 2: $piholeDNS2" $r $c
if [[ $piholeDNS1 == "$strInvalid" ]]; then
if [[ ${piholeDNS1} == "$strInvalid" ]] || [[ ${piholeDNS2} == "$strInvalid" ]]; then
whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\n\n DNS Server 1: $piholeDNS1\n DNS Server 2: $piholeDNS2" ${r} ${c}
if [[ ${piholeDNS1} == "$strInvalid" ]]; then
piholeDNS1=""
fi
if [[ $piholeDNS2 == "$strInvalid" ]]; then
if [[ ${piholeDNS2} == "$strInvalid" ]]; then
piholeDNS2=""
fi
DNSSettingsCorrect=False
else
if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\n DNS Server 1: $piholeDNS1\n DNS Server 2: $piholeDNS2" $r $c) then
if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\n DNS Server 1: $piholeDNS1\n DNS Server 2: $piholeDNS2" ${r} ${c}); then
DNSSettingsCorrect=True
else
# If the settings are wrong, the loop continues
@ -493,105 +491,106 @@ versionCheckDNSmasq(){
newFileToInstall="/etc/.pihole/advanced/01-pihole.conf"
newFileFinalLocation="/etc/dnsmasq.d/01-pihole.conf"
if [ -f $dnsFile1 ]; then
if [ -f ${dnsFile1} ]; then
echo -n "::: Existing dnsmasq.conf found..."
if grep -q $dnsSearch $dnsFile1; then
if grep -q ${dnsSearch} ${dnsFile1}; then
echo " it is from a previous pi-hole install."
echo -n "::: Backing up dnsmasq.conf to dnsmasq.conf.orig..."
$SUDO mv -f $dnsFile1 $dnsFile2
${SUDO} mv -f ${dnsFile1} ${dnsFile2}
echo " done."
echo -n "::: Restoring default dnsmasq.conf..."
$SUDO cp $defaultFile $dnsFile1
${SUDO} cp ${defaultFile} ${dnsFile1}
echo " done."
else
echo " it is not a pi-hole file, leaving alone!"
fi
else
echo -n "::: No dnsmasq.conf found.. restoring default dnsmasq.conf..."
$SUDO cp $defaultFile $dnsFile1
${SUDO} cp ${defaultFile} ${dnsFile1}
echo " done."
fi
echo -n "::: Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf..."
$SUDO cp $newFileToInstall $newFileFinalLocation
${SUDO} cp ${newFileToInstall} ${newFileFinalLocation}
echo " done."
$SUDO sed -i "s/@INT@/$piholeInterface/" $newFileFinalLocation
${SUDO} sed -i "s/@INT@/$piholeInterface/" ${newFileFinalLocation}
if [[ "$piholeDNS1" != "" ]]; then
$SUDO sed -i "s/@DNS1@/$piholeDNS1/" $newFileFinalLocation
${SUDO} sed -i "s/@DNS1@/$piholeDNS1/" ${newFileFinalLocation}
else
$SUDO sed -i '/^server=@DNS1@/d' $newFileFinalLocation
${SUDO} sed -i '/^server=@DNS1@/d' ${newFileFinalLocation}
fi
if [[ "$piholeDNS2" != "" ]]; then
$SUDO sed -i "s/@DNS2@/$piholeDNS2/" $newFileFinalLocation
${SUDO} sed -i "s/@DNS2@/$piholeDNS2/" ${newFileFinalLocation}
else
$SUDO sed -i '/^server=@DNS2@/d' $newFileFinalLocation
${SUDO} sed -i '/^server=@DNS2@/d' ${newFileFinalLocation}
fi
$SUDO sed -i 's/^#conf-dir=\/etc\/dnsmasq.d$/conf-dir=\/etc\/dnsmasq.d/' $dnsFile1
${SUDO} sed -i 's/^#conf-dir=\/etc\/dnsmasq.d$/conf-dir=\/etc\/dnsmasq.d/' ${dnsFile1}
}
installScripts() {
# Install the scripts from /etc/.pihole to their various locations
$SUDO echo ":::"
$SUDO echo -n "::: Installing scripts to /opt/pihole..."
${SUDO} echo ":::"
${SUDO} echo -n "::: Installing scripts to /opt/pihole..."
if [ ! -d /opt/pihole ]; then
$SUDO mkdir /opt/pihole
$SUDO chown "$USER":root /opt/pihole
$SUDO chmod u+srwx /opt/pihole
${SUDO} mkdir /opt/pihole
${SUDO} chown "$USER":root /opt/pihole
${SUDO} chmod u+srwx /opt/pihole
fi
$SUDO cp /etc/.pihole/gravity.sh /opt/pihole/gravity.sh
$SUDO cp /etc/.pihole/advanced/Scripts/chronometer.sh /opt/pihole/chronometer.sh
$SUDO cp /etc/.pihole/advanced/Scripts/whitelist.sh /opt/pihole/whitelist.sh
$SUDO cp /etc/.pihole/advanced/Scripts/blacklist.sh /opt/pihole/blacklist.sh
$SUDO cp /etc/.pihole/advanced/Scripts/piholeDebug.sh /opt/pihole/piholeDebug.sh
$SUDO cp /etc/.pihole/advanced/Scripts/piholeLogFlush.sh /opt/pihole/piholeLogFlush.sh
$SUDO cp /etc/.pihole/advanced/Scripts/updateDashboard.sh /opt/pihole/updateDashboard.sh
$SUDO cp /etc/.pihole/automated\ install/uninstall.sh /opt/pihole/uninstall.sh
$SUDO cp /etc/.pihole/advanced/Scripts/setupLCD.sh /opt/pihole/setupLCD.sh
$SUDO chmod 755 /opt/pihole/{gravity,chronometer,whitelist,blacklist,piholeLogFlush,updateDashboard,uninstall,setupLCD}.sh
$SUDO cp /etc/.pihole/pihole /usr/local/bin/pihole
$SUDO chmod 755 /usr/local/bin/pihole
$SUDO cp /etc/.pihole/advanced/bash-completion/pihole /etc/bash_completion.d/pihole
${SUDO} cp /etc/.pihole/gravity.sh /opt/pihole/gravity.sh
${SUDO} cp /etc/.pihole/advanced/Scripts/chronometer.sh /opt/pihole/chronometer.sh
${SUDO} cp /etc/.pihole/advanced/Scripts/whitelist.sh /opt/pihole/whitelist.sh
${SUDO} cp /etc/.pihole/advanced/Scripts/blacklist.sh /opt/pihole/blacklist.sh
${SUDO} cp /etc/.pihole/advanced/Scripts/piholeDebug.sh /opt/pihole/piholeDebug.sh
${SUDO} cp /etc/.pihole/advanced/Scripts/piholeLogFlush.sh /opt/pihole/piholeLogFlush.sh
${SUDO} cp /etc/.pihole/advanced/Scripts/updateDashboard.sh /opt/pihole/updateDashboard.sh
${SUDO} cp /etc/.pihole/automated\ install/uninstall.sh /opt/pihole/uninstall.sh
${SUDO} cp /etc/.pihole/advanced/Scripts/setupLCD.sh /opt/pihole/setupLCD.sh
${SUDO} cp /etc/.pihole/advanced/Scripts/version.sh /opt/pihole/version.sh
${SUDO} chmod 755 /opt/pihole/gravity.sh /opt/pihole/chronometer.sh /opt/pihole/whitelist.sh /opt/pihole/blacklist.sh /opt/pihole/piholeLogFlush.sh /opt/pihole/updateDashboard.sh /opt/pihole/uninstall.sh /opt/pihole/setupLCD.sh /opt/pihole/version.sh
${SUDO} cp /etc/.pihole/pihole /usr/local/bin/pihole
${SUDO} chmod 755 /usr/local/bin/pihole
${SUDO} cp /etc/.pihole/advanced/bash-completion/pihole /etc/bash_completion.d/pihole
. /etc/bash_completion.d/pihole
#Tidy up /usr/local/bin directory if installing over previous install.
oldFiles=( gravity chronometer whitelist blacklist piholeLogFlush updateDashboard uninstall setupLCD piholeDebug)
for i in "${oldFiles[@]}"; do
if [ -f "/usr/local/bin/$i.sh" ]; then
$SUDO rm /usr/local/bin/"$i".sh
${SUDO} rm /usr/local/bin/"$i".sh
fi
done
$SUDO echo " done."
${SUDO} echo " done."
}
installConfigs() {
# Install the configs from /etc/.pihole to their various locations
$SUDO echo ":::"
$SUDO echo "::: Installing configs..."
${SUDO} echo ":::"
${SUDO} echo "::: Installing configs..."
versionCheckDNSmasq
if [ ! -d "/etc/lighttpd" ]; then
$SUDO mkdir /etc/lighttpd
$SUDO chown "$USER":root /etc/lighttpd
$SUDO mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
${SUDO} mkdir /etc/lighttpd
${SUDO} chown "$USER":root /etc/lighttpd
${SUDO} mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
fi
$SUDO cp /etc/.pihole/advanced/$LIGHTTPD_CFG /etc/lighttpd/lighttpd.conf
$SUDO mkdir -p /var/run/lighttpd
$SUDO chown $LIGHTTPD_USER:$LIGHTTPD_GROUP /var/run/lighttpd
$SUDO mkdir -p /var/cache/lighttpd/compress
$SUDO chown $LIGHTTPD_USER:$LIGHTTPD_GROUP /var/cache/lighttpd/compress
${SUDO} cp /etc/.pihole/advanced/${LIGHTTPD_CFG} /etc/lighttpd/lighttpd.conf
${SUDO} mkdir -p /var/run/lighttpd
${SUDO} chown ${LIGHTTPD_USER}:${LIGHTTPD_GROUP} /var/run/lighttpd
${SUDO} mkdir -p /var/cache/lighttpd/compress
${SUDO} chown ${LIGHTTPD_USER}:${LIGHTTPD_GROUP} /var/cache/lighttpd/compress
}
stopServices() {
# Stop dnsmasq and lighttpd
$SUDO echo ":::"
$SUDO echo -n "::: Stopping services..."
${SUDO} echo ":::"
${SUDO} echo -n "::: Stopping services..."
#$SUDO service dnsmasq stop & spinner $! || true
if [ -x "$(command -v systemctl)" ]; then
$SUDO systemctl stop lighttpd & spinner $! || true
${SUDO} systemctl stop lighttpd & spinner $! || true
else
$SUDO service lighttpd stop & spinner $! || true
${SUDO} service lighttpd stop & spinner $! || true
fi
$SUDO echo " done."
${SUDO} echo " done."
}
installerDependencies() {
@ -601,7 +600,7 @@ installerDependencies() {
# if so, advise the user to run apt-get update/upgrade at their own discretion
#Check to see if apt-get update has already been run today
# it needs to have been run at least once on new installs!
timestamp=$(stat -c %Y $PKG_CACHE)
timestamp=$(stat -c %Y ${PKG_CACHE})
timestampAsDate=$(date -d @"$timestamp" "+%b %e")
today=$(date "+%b %e")
@ -609,15 +608,15 @@ installerDependencies() {
#update package lists
echo ":::"
echo -n "::: $PKG_MANAGER update has not been run today. Running now..."
$SUDO $UPDATE_PKG_CACHE > /dev/null 2>&1
${SUDO} ${UPDATE_PKG_CACHE} > /dev/null 2>&1
echo " done!"
fi
echo ":::"
echo -n "::: Checking $PKG_MANAGER for upgraded packages...."
updatesToInstall=$(eval "$SUDO $PKG_COUNT")
updatesToInstall=$(eval "${SUDO} ${PKG_COUNT}")
echo " done!"
echo ":::"
if [[ $updatesToInstall -eq "0" ]]; then
if [[ ${updatesToInstall} -eq "0" ]]; then
echo "::: Your pi is up to date! Continuing with pi-hole installation..."
else
echo "::: There are $updatesToInstall updates availible for your pi!"
@ -628,10 +627,10 @@ installerDependencies() {
echo "::: Checking installer dependencies..."
for i in "${INSTALLER_DEPS[@]}"; do
echo -n "::: Checking for $i..."
package_check $i > /dev/null
package_check ${i} > /dev/null
if ! [ $? -eq 0 ]; then
echo -n " Not found! Installing...."
$SUDO $PKG_INSTALL "$i" > /dev/null 2>&1
${SUDO} ${PKG_INSTALL} "$i" > /dev/null 2>&1
echo " done!"
else
echo " already installed!"
@ -645,10 +644,10 @@ checkForDependencies() {
for i in "${PIHOLE_DEPS[@]}"; do
echo -n "::: Checking for $i..."
package_check $i > /dev/null
package_check ${i} > /dev/null
if ! [ $? -eq 0 ]; then
echo -n " Not found! Installing...."
$SUDO $PKG_INSTALL "$i" > /dev/null & spinner $!
${SUDO} ${PKG_INSTALL} "$i" > /dev/null & spinner $!
echo " done!"
else
echo " already installed!"
@ -660,18 +659,18 @@ getGitFiles() {
# Setup git repos for base files and web admin
echo ":::"
echo "::: Checking for existing base files..."
if is_repo $piholeFilesDir; then
make_repo $piholeFilesDir $piholeGitUrl
if is_repo ${piholeFilesDir}; then
make_repo ${piholeFilesDir} ${piholeGitUrl}
else
update_repo $piholeFilesDir
update_repo ${piholeFilesDir}
fi
echo ":::"
echo "::: Checking for existing web interface..."
if is_repo $webInterfaceDir; then
make_repo $webInterfaceDir $webInterfaceGitUrl
if is_repo ${webInterfaceDir}; then
make_repo ${webInterfaceDir} ${webInterfaceGitUrl}
else
update_repo $webInterfaceDir
update_repo ${webInterfaceDir}
fi
}
@ -689,8 +688,8 @@ is_repo() {
make_repo() {
# Remove the non-repod interface and clone the interface
echo -n "::: Cloning $2 into $1..."
$SUDO rm -rf "$1"
$SUDO git clone -q "$2" "$1" > /dev/null & spinner $!
${SUDO} rm -rf "$1"
${SUDO} git clone -q "$2" "$1" > /dev/null & spinner $!
echo " done!"
}
@ -698,7 +697,7 @@ update_repo() {
# Pull the latest commits
echo -n "::: Updating repo in $1..."
cd "$1" || exit
$SUDO git pull -q > /dev/null & spinner $!
${SUDO} git pull -q > /dev/null & spinner $!
echo " done!"
}
@ -706,59 +705,59 @@ update_repo() {
CreateLogFile() {
# Create logfiles if necessary
echo ":::"
$SUDO echo -n "::: Creating log file and changing owner to dnsmasq..."
${SUDO} echo -n "::: Creating log file and changing owner to dnsmasq..."
if [ ! -f /var/log/pihole.log ]; then
$SUDO touch /var/log/pihole.log
$SUDO chmod 644 /var/log/pihole.log
$SUDO chown dnsmasq:root /var/log/pihole.log
$SUDO echo " done!"
${SUDO} touch /var/log/pihole.log
${SUDO} chmod 644 /var/log/pihole.log
${SUDO} chown dnsmasq:root /var/log/pihole.log
${SUDO} echo " done!"
else
$SUDO echo " already exists!"
${SUDO} echo " already exists!"
fi
}
installPiholeWeb() {
# Install the web interface
$SUDO echo ":::"
$SUDO echo -n "::: Installing pihole custom index page..."
${SUDO} echo ":::"
${SUDO} echo -n "::: Installing pihole custom index page..."
if [ -d "/var/www/html/pihole" ]; then
$SUDO echo " Existing page detected, not overwriting"
${SUDO} echo " Existing page detected, not overwriting"
else
$SUDO mkdir /var/www/html/pihole
${SUDO} mkdir /var/www/html/pihole
if [ -f /var/www/html/index.lighttpd.html ]; then
$SUDO mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
${SUDO} mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
else
printf "\n:::\tNo default index.lighttpd.html file found... not backing up"
fi
$SUDO cp /etc/.pihole/advanced/index.* /var/www/html/pihole/.
$SUDO echo " done!"
${SUDO} cp /etc/.pihole/advanced/index.* /var/www/html/pihole/.
${SUDO} echo " done!"
fi
# Install Sudoer file
echo -n "::: Installing sudoer file..."
$SUDO mkdir -p /etc/sudoers.d/
$SUDO cp /etc/.pihole/advanced/pihole.sudo /etc/sudoers.d/pihole
$SUDO chmod 0440 /etc/sudoers.d/pihole
${SUDO} mkdir -p /etc/sudoers.d/
${SUDO} cp /etc/.pihole/advanced/pihole.sudo /etc/sudoers.d/pihole
${SUDO} chmod 0440 /etc/sudoers.d/pihole
echo " done!"
}
installCron() {
# Install the cron job
$SUDO echo ":::"
$SUDO echo -n "::: Installing latest Cron script..."
$SUDO cp /etc/.pihole/advanced/pihole.cron /etc/cron.d/pihole
$SUDO echo " done!"
${SUDO} echo ":::"
${SUDO} echo -n "::: Installing latest Cron script..."
${SUDO} cp /etc/.pihole/advanced/pihole.cron /etc/cron.d/pihole
${SUDO} echo " done!"
}
runGravity() {
# Rub gravity.sh to build blacklists
$SUDO echo ":::"
$SUDO echo "::: Preparing to run gravity.sh to refresh hosts..."
${SUDO} echo ":::"
${SUDO} echo "::: Preparing to run gravity.sh to refresh hosts..."
if ls /etc/pihole/list* 1> /dev/null 2>&1; then
echo "::: Cleaning up previous install (preserving whitelist/blacklist)"
$SUDO rm /etc/pihole/list.*
${SUDO} rm /etc/pihole/list.*
fi
echo "::: Running gravity.sh"
$SUDO /opt/pihole/gravity.sh
${SUDO} /opt/pihole/gravity.sh
}
setUser(){
@ -768,45 +767,58 @@ setUser(){
echo "::: User 'pihole' already exists"
else
echo "::: User 'pihole' doesn't exist. Creating..."
$SUDO useradd -r -s /usr/sbin/nologin pihole
${SUDO} useradd -r -s /usr/sbin/nologin pihole
fi
}
configureFirewall() {
# Allow HTTP and DNS traffic
if [ -x "$(command -v firewall-cmd)" ]; then
$SUDO firewall-cmd --state > /dev/null
${SUDO} firewall-cmd --state > /dev/null
if [[ $? -eq 0 ]]; then
$SUDO echo "::: Configuring firewalld for httpd and dnsmasq.."
$SUDO firewall-cmd --permanent --add-port=80/tcp
$SUDO firewall-cmd --permanent --add-port=53/tcp
$SUDO firewall-cmd --permanent --add-port=53/udp
$SUDO firewall-cmd --reload
${SUDO} echo "::: Configuring firewalld for httpd and dnsmasq.."
${SUDO} firewall-cmd --permanent --add-port=80/tcp
${SUDO} firewall-cmd --permanent --add-port=53/tcp
${SUDO} firewall-cmd --permanent --add-port=53/udp
${SUDO} firewall-cmd --reload
fi
elif [ -x "$(command -v iptables)" ]; then
$SUDO echo "::: Configuring iptables for httpd and dnsmasq.."
$SUDO iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
$SUDO iptables -A INPUT -p tcp -m tcp --dport 53 -j ACCEPT
$SUDO iptables -A INPUT -p udp -m udp --dport 53 -j ACCEPT
${SUDO} echo "::: Configuring iptables for httpd and dnsmasq.."
${SUDO} iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
${SUDO} iptables -A INPUT -p tcp -m tcp --dport 53 -j ACCEPT
${SUDO} iptables -A INPUT -p udp -m udp --dport 53 -j ACCEPT
else
$SUDO echo "::: No firewall detected.. skipping firewall configuration."
${SUDO} echo "::: No firewall detected.. skipping firewall configuration."
fi
}
finalExports() {
#If it already exists, lets overwrite it with the new values.
if [[ -f ${setupVars} ]];then
${SUDO} rm ${setupVars}
fi
${SUDO} echo "piholeInterface=${piholeInterface}" >> ${setupVars}
${SUDO} echo "IPv4addr=${IPv4addr}" >> ${setupVars}
${SUDO} echo "piholeIPv6=${piholeIPv6}" >> ${setupVars}
${SUDO} echo "piholeDNS1=${piholeDNS1}" >> ${setupVars}
${SUDO} echo "piholeDNS2=${piholeDNS2}" >> ${setupVars}
}
installPihole() {
# Install base files and web interface
checkForDependencies # done
stopServices
setUser
$SUDO mkdir -p /etc/pihole/
${SUDO} mkdir -p /etc/pihole/
if [ ! -d "/var/www/html" ]; then
$SUDO mkdir -p /var/www/html
${SUDO} mkdir -p /var/www/html
fi
$SUDO chown $LIGHTTPD_USER:$LIGHTTPD_GROUP /var/www/html
$SUDO chmod 775 /var/www/html
$SUDO usermod -a -G $LIGHTTPD_GROUP pihole
${SUDO} chown ${LIGHTTPD_USER}:${LIGHTTPD_GROUP} /var/www/html
${SUDO} chmod 775 /var/www/html
${SUDO} usermod -a -G ${LIGHTTPD_GROUP} pihole
if [ -x "$(command -v lighty-enable-mod)" ]; then
$SUDO lighty-enable-mod fastcgi fastcgi-php > /dev/null
${SUDO} lighty-enable-mod fastcgi fastcgi-php > /dev/null
else
printf "\n:::\tWarning: 'lighty-enable-mod' utility not found. Please ensure fastcgi is enabled if you experience issues.\n"
fi
@ -814,6 +826,24 @@ installPihole() {
getGitFiles
installScripts
installConfigs
installConfigs
CreateLogFile
configureSelinux
installPiholeWeb
installCron
runGravity
configureFirewall
finalExports
}
updatePihole() {
# Install base files and web interface
checkForDependencies # done
stopServices
getGitFiles
installScripts
installConfigs
installConfigs
CreateLogFile
configureSelinux
installPiholeWeb
@ -829,22 +859,22 @@ configureSelinux() {
package_check "selinux-policy-devel" > /dev/null
if ! [ $? -eq 0 ]; then
echo -n " Not found! Installing...."
$SUDO $PKG_INSTALL "selinux-policy-devel" > /dev/null & spinner $!
${SUDO} ${PKG_INSTALL} "selinux-policy-devel" > /dev/null & spinner $!
echo " done!"
else
echo " already installed!"
fi
printf "::: Enabling httpd server side includes (SSI).. "
$SUDO setsebool -P httpd_ssi_exec on
${SUDO} setsebool -P httpd_ssi_exec on
if [ $? -eq 0 ]; then
echo -n "Success\n"
fi
printf ":::\tCompiling Pi-Hole SELinux policy..\n"
$SUDO checkmodule -M -m -o /etc/pihole/pihole.mod /etc/.pihole/advanced/selinux/pihole.te
$SUDO semodule_package -o /etc/pihole/pihole.pp -m /etc/pihole/pihole.mod
$SUDO semodule -i /etc/pihole/pihole.pp
$SUDO rm -f /etc/pihole/pihole.mod
$SUDO semodule -l | grep pihole > /dev/null
${SUDO} checkmodule -M -m -o /etc/pihole/pihole.mod /etc/.pihole/advanced/selinux/pihole.te
${SUDO} semodule_package -o /etc/pihole/pihole.pp -m /etc/pihole/pihole.mod
${SUDO} semodule -i /etc/pihole/pihole.pp
${SUDO} rm -f /etc/pihole/pihole.mod
${SUDO} semodule -l | grep pihole > /dev/null
if [ $? -eq 0 ]; then
printf "::: Successfully installed Pi-Hole SELinux policy\n"
else
@ -863,61 +893,102 @@ IPv6: $piholeIPv6
If you set a new IP address, you should restart the Pi.
The install log is in /etc/pihole.
View the web interface at http://pi.hole/admin or http://${IPv4addr%/*}/admin" $r $c
View the web interface at http://pi.hole/admin or http://${IPv4addr%/*}/admin" ${r} ${c}
}
updateDialogs(){
UpdateCmd=(whiptail --separate-output --radiolist "We have detected an existing install.\n\n Selecting Update will retain settings from the existing install.\n\n Selecting Install will allow you to enter new settings.\n\n(Highlight desired option, and press space to select!)" ${r} ${c} 2)
UpdateChoices=(Update "" on
Install "" off)
UpdateChoice=$("${UpdateCmd[@]}" "${UpdateChoices[@]}" 2>&1 >/dev/tty)
if [[ $? = 0 ]];then
case ${UpdateChoice} in
Update)
echo "::: Updating existing install"
useUpdateVars=true
;;
Install)
echo "::: Running complete install script"
useUpdateVars=false
;;
esac
else
echo "::: Cancel selected. Exiting..."
exit 1
fi
}
######## SCRIPT ############
# Start the installer
$SUDO mkdir -p /etc/pihole/
if [[ -f ${setupVars} ]];then
. ${setupVars}
if [ "$1" == "pihole" ]; then
useUpdateVars=true
else
updateDialogs
fi
fi
# Start the installer
# Install packages used by this installation script
installerDependencies
if [[ ${useUpdateVars} == false ]]; then
welcomeDialogs
# Verify there is enough disk space for the install
verifyFreeDiskSpace
${SUDO} mkdir -p /etc/pihole/
# Just back up the original Pi-hole right away since it won't take long and it gets it out of the way
backupLegacyPihole
# Find IP used to route to outside world
findIPRoute
# Find interfaces and let the user choose one
chooseInterface
# Let the user decide if they want to block ads over IPv4 and/or IPv6
use4andor6
# Decide what upstream DNS Servers to use
setDNS
# Install and log everything to a file
installPihole | tee $tmpLog
installPihole | tee ${tmpLog}
else
updatePihole | tee ${tmpLog}
fi
# Move the log file into /etc/pihole for storage
$SUDO mv $tmpLog $instalLogLoc
${SUDO} mv ${tmpLog} ${instalLogLoc}
if [[ ${useUpdateVars} == false ]]; then
displayFinalMessage
fi
echo -n "::: Restarting services..."
# Start services
if [ -x "$(command -v systemctl)" ]; then
$SUDO systemctl enable dnsmasq
$SUDO systemctl restart dnsmasq
$SUDO systemctl enable lighttpd
$SUDO systemctl start lighttpd
${SUDO} systemctl enable dnsmasq
${SUDO} systemctl restart dnsmasq
${SUDO} systemctl enable lighttpd
${SUDO} systemctl start lighttpd
else
$SUDO service dnsmasq restart
$SUDO service lighttpd start
${SUDO} service dnsmasq restart
${SUDO} service lighttpd start
fi
echo " done."
echo ":::"
if [[ ${useUpdateVars} == false ]]; then
echo "::: Installation Complete! Configure your devices to use the Pi-hole as their DNS server using:"
echo "::: ${IPv4addr%/*}"
echo "::: $piholeIPv6"
echo ":::"
echo "::: If you set a new IP address, you should restart the Pi."
else
echo "::: Update complete!"
fi
echo ":::"
echo "::: The install log is located at: /etc/pihole/install.log"
echo "::: View the web interface at http://pi.hole/admin or http://${IPv4addr%/*}/admin"

View file

@ -39,7 +39,7 @@ if [ -x "$(command -v rpm)" ];then
rpm -qa | grep ^$1- > /dev/null
}
package_cleanup() {
$SUDO $PKG_MANAGER -y autoremove
${SUDO} ${PKG_MANAGER} -y autoremove
}
elif [ -x "$(command -v apt-get)" ];then
# Debian Family
@ -50,8 +50,8 @@ elif [ -x "$(command -v apt-get)" ];then
dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed"
}
package_cleanup() {
$SUDO $PKG_MANAGER -y autoremove
$SUDO $PKG_MANAGER -y autoclean
${SUDO} ${PKG_MANAGER} -y autoremove
${SUDO} ${PKG_MANAGER} -y autoclean
}
else
echo "OS distribution not supported"
@ -66,8 +66,8 @@ spinner()
while [ "$(ps a | awk '{print $1}' | grep "$pid")" ]; do
local temp=${spinstr#?}
printf " [%c] " "$spinstr"
local spinstr=$temp${spinstr%"$temp"}
sleep $delay
local spinstr=${temp}${spinstr%"$temp"}
sleep ${delay}
printf "\b\b\b\b\b\b"
done
printf " \b\b\b\b"
@ -77,12 +77,12 @@ function removeAndPurge {
# Purge dependencies
echo ":::"
for i in "${PIHOLE_DEPS[@]}"; do
package_check $i > /dev/null
package_check ${i} > /dev/null
if [ $? -eq 0 ]; then
while true; do
read -rp "::: Do you wish to remove $i from your system? [y/n]: " yn
case $yn in
[Yy]* ) printf ":::\tRemoving %s..." "$i"; $SUDO $PKG_REMOVE "$i" &> /dev/null & spinner $!; printf "done!\n"; break;;
case ${yn} in
[Yy]* ) printf ":::\tRemoving %s..." "$i"; ${SUDO} ${PKG_REMOVE} "$i" &> /dev/null & spinner $!; printf "done!\n"; break;;
[Nn]* ) printf ":::\tSkipping %s" "$i\n"; break;;
* ) printf "::: You must answer yes or no!\n";;
esac
@ -94,7 +94,7 @@ echo ":::"
# Remove dependency config files
echo "::: Removing dnsmasq config files..."
$SUDO rm /etc/dnsmasq.conf /etc/dnsmasq.conf.orig /etc/dnsmasq.d/01-pihole.conf &> /dev/null
${SUDO} rm /etc/dnsmasq.conf /etc/dnsmasq.conf.orig /etc/dnsmasq.d/01-pihole.conf &> /dev/null
# Take care of any additional package cleaning
printf "::: Auto removing & cleaning remaining dependencies..."
@ -108,14 +108,14 @@ function removeNoPurge {
echo ":::"
# Only web directories/files that are created by pihole should be removed.
echo "::: Removing the Pi-hole Web server files..."
$SUDO rm -rf /var/www/html/admin &> /dev/null
$SUDO rm -rf /var/www/html/pihole &> /dev/null
$SUDO rm /var/www/html/index.lighttpd.orig &> /dev/null
${SUDO} rm -rf /var/www/html/admin &> /dev/null
${SUDO} rm -rf /var/www/html/pihole &> /dev/null
${SUDO} rm /var/www/html/index.lighttpd.orig &> /dev/null
# If the web directory is empty after removing these files, then the parent html folder can be removed.
if [ -d "/var/www/html" ]; then
if [[ ! "$(ls -A /var/www/html)" ]]; then
$SUDO rm -rf /var/www/html &> /dev/null
${SUDO} rm -rf /var/www/html &> /dev/null
fi
fi
@ -125,36 +125,36 @@ function removeNoPurge {
# preserved.
if [[ -f /etc/crontab.orig ]]; then
echo "::: Initial Pi-hole cron detected. Restoring the default system cron..."
$SUDO mv /etc/crontab /etc/crontab.pihole
$SUDO mv /etc/crontab.orig /etc/crontab
$SUDO service cron restart
${SUDO} mv /etc/crontab /etc/crontab.pihole
${SUDO} mv /etc/crontab.orig /etc/crontab
${SUDO} service cron restart
fi
# Attempt to preserve backwards compatibility with older versions
if [[ -f /etc/cron.d/pihole ]];then
echo "::: Removing cron.d/pihole..."
$SUDO rm /etc/cron.d/pihole &> /dev/null
${SUDO} rm /etc/cron.d/pihole &> /dev/null
fi
echo "::: Removing config files and scripts..."
package_check $i > /dev/null
package_check ${i} > /dev/null
if [ $? -eq 1 ]; then
$SUDO rm -rf /etc/lighttpd/ &> /dev/null
${SUDO} rm -rf /etc/lighttpd/ &> /dev/null
else
if [ -f /etc/lighttpd/lighttpd.conf.orig ]; then
$SUDO mv /etc/lighttpd/lighttpd.conf.orig /etc/lighttpd/lighttpd.conf
${SUDO} mv /etc/lighttpd/lighttpd.conf.orig /etc/lighttpd/lighttpd.conf
fi
fi
$SUDO rm /etc/dnsmasq.d/adList.conf &> /dev/null
$SUDO rm /etc/dnsmasq.d/01-pihole.conf &> /dev/null
$SUDO rm -rf /var/log/*pihole* &> /dev/null
$SUDO rm -rf /etc/pihole/ &> /dev/null
$SUDO rm -rf /etc/.pihole/ &> /dev/null
$SUDO rm -rf /opt/pihole/ &> /dev/null
$SUDO rm /usr/local/bin/pihole &> /dev/null
$SUDO rm /etc/bash_completion.d/pihole &> /dev/null
$SUDO rm /etc/sudoers.d/pihole &> /dev/null
${SUDO} rm /etc/dnsmasq.d/adList.conf &> /dev/null
${SUDO} rm /etc/dnsmasq.d/01-pihole.conf &> /dev/null
${SUDO} rm -rf /var/log/*pihole* &> /dev/null
${SUDO} rm -rf /etc/pihole/ &> /dev/null
${SUDO} rm -rf /etc/.pihole/ &> /dev/null
${SUDO} rm -rf /opt/pihole/ &> /dev/null
${SUDO} rm /usr/local/bin/pihole &> /dev/null
${SUDO} rm /etc/bash_completion.d/pihole &> /dev/null
${SUDO} rm /etc/sudoers.d/pihole &> /dev/null
echo ":::"
printf "::: Finished removing PiHole from your system. Sorry to see you go!\n"
@ -168,7 +168,7 @@ echo "::: Preparing to remove packages, be sure that each may be safely removed
echo "::: (SAFE TO REMOVE ALL ON RASPBIAN)"
while true; do
read -rp "::: Do you wish to purge PiHole's dependencies from your OS? (You will be prompted for each package) [y/n]: " yn
case $yn in
case ${yn} in
[Yy]* ) removeAndPurge; break;;
[Nn]* ) removeNoPurge; break;;

View file

@ -27,6 +27,18 @@ else
fi
fi
function helpFunc()
{
echo "::: Pull in domains from adlists"
echo ":::"
echo "::: Usage: pihole -g"
echo ":::"
echo "::: Options:"
echo "::: -f, --force Force lists to be downloaded, even if they don't need updating."
echo "::: -h, --help Show this help dialog"
exit 1
}
piholeIPfile=/etc/pihole/piholeIP
piholeIPv6file=/etc/pihole/.useIPv6
@ -35,9 +47,9 @@ adListDefault=/etc/pihole/adlists.default
whitelistScript=/opt/pihole/whitelist.sh
blacklistScript=/opt/pihole/blacklist.sh
if [[ -f $piholeIPfile ]];then
if [[ -f ${piholeIPfile} ]];then
# If the file exists, it means it was exported from the installation script and we should use that value instead of detecting it in this script
piholeIP=$(cat $piholeIPfile)
piholeIP=$(cat ${piholeIPfile})
#rm $piholeIPfile
else
# Otherwise, the IP address can be taken directly from the machine, which will happen when the script is run by the user and not the installation script
@ -46,7 +58,7 @@ else
piholeIP=${piholeIPCIDR%/*}
fi
if [[ -f $piholeIPv6file ]];then
if [[ -f ${piholeIPv6file} ]];then
# If the file exists, then the user previously chose to use IPv6 in the automated installer
piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
fi
@ -54,22 +66,22 @@ fi
# Variables for various stages of downloading and formatting the list
## Nate 3/26/2016 - Commented unused variables
basename=pihole
piholeDir=/etc/$basename
adList=$piholeDir/gravity.list
piholeDir=/etc/${basename}
adList=${piholeDir}/gravity.list
#blacklist=$piholeDir/blacklist.txt
#whitelist=$piholeDir/whitelist.txt
#latentWhitelist=$piholeDir/latentWhitelist.txt
justDomainsExtension=domains
matterandlight=$basename.0.matterandlight.txt
supernova=$basename.1.supernova.txt
eventHorizon=$basename.2.eventHorizon.txt
accretionDisc=$basename.3.accretionDisc.txt
matterandlight=${basename}.0.matterandlight.txt
supernova=${basename}.1.supernova.txt
eventHorizon=${basename}.2.eventHorizon.txt
accretionDisc=${basename}.3.accretionDisc.txt
#eyeOfTheNeedle=$basename.4.wormhole.txt
# After setting defaults, check if there's local overrides
if [[ -r $piholeDir/pihole.conf ]];then
if [[ -r ${piholeDir}/pihole.conf ]];then
echo "::: Local calibration requested..."
. $piholeDir/pihole.conf
. ${piholeDir}/pihole.conf
fi
###########################
@ -78,18 +90,18 @@ function gravity_collapse() {
echo "::: Neutrino emissions detected..."
echo ":::"
#Decide if we're using a custom ad block list, or defaults.
if [ -f $adListFile ]; then
if [ -f ${adListFile} ]; then
#custom file found, use this instead of default
echo -n "::: Custom adList file detected. Reading..."
sources=()
while read -r line; do
#Do not read commented out or blank lines
if [[ $line = \#* ]] || [[ ! $line ]]; then
if [[ ${line} = \#* ]] || [[ ! ${line} ]]; then
echo "" > /dev/null
else
sources+=($line)
sources+=(${line})
fi
done < $adListFile
done < ${adListFile}
echo " done!"
else
#no custom file found, use defaults!
@ -97,27 +109,27 @@ function gravity_collapse() {
sources=()
while read -r line; do
#Do not read commented out or blank lines
if [[ $line = \#* ]] || [[ ! $line ]]; then
if [[ ${line} = \#* ]] || [[ ! ${line} ]]; then
echo "" > /dev/null
else
sources+=($line)
sources+=(${line})
fi
done < $adListDefault
done < ${adListDefault}
echo " done!"
fi
# Create the pihole resource directory if it doesn't exist. Future files will be stored here
if [[ -d $piholeDir ]];then
if [[ -d ${piholeDir} ]];then
# Temporary hack to allow non-root access to pihole directory
# Will update later, needed for existing installs, new installs should
# create this directory as non-root
$SUDO chmod 777 $piholeDir
${SUDO} chmod 777 ${piholeDir}
echo ":::"
echo "::: Existing pihole directory found"
else
echo "::: Creating pihole directory..."
mkdir $piholeDir
$SUDO chmod 777 $piholeDir
mkdir ${piholeDir}
${SUDO} chmod 777 ${piholeDir}
fi
}
@ -146,13 +158,13 @@ function gravity_transport() {
# tmp file, so we don't have to store the (long!) lists in RAM
patternBuffer=$(mktemp)
heisenbergCompensator=""
if [[ -r $saveLocation ]]; then
if [[ -r ${saveLocation} ]]; then
# if domain has been saved, add file for date check to only download newer
heisenbergCompensator="-z $saveLocation"
fi
# Silently curl url
curl -s -L $cmd_ext $heisenbergCompensator -A "$agent" $url > $patternBuffer
curl -s -L ${cmd_ext} ${heisenbergCompensator} -A "$agent" ${url} > ${patternBuffer}
# Check for list updates
gravity_patternCheck "$patternBuffer"
# Cleanup
@ -170,8 +182,8 @@ function gravity_spinup() {
domain=$(echo "$url" | cut -d'/' -f3)
# Save the file as list.#.domain
saveLocation=$piholeDir/list.$i.$domain.$justDomainsExtension
activeDomains[$i]=$saveLocation
saveLocation=${piholeDir}/list.${i}.${domain}.${justDomainsExtension}
activeDomains[$i]=${saveLocation}
agent="Mozilla/10.0"
@ -201,10 +213,10 @@ function gravity_Schwarzchild() {
echo "::: "
# Find all active domains and compile them into one file and remove CRs
echo -n "::: Aggregating list of domains..."
truncate -s 0 $piholeDir/$matterandlight
truncate -s 0 ${piholeDir}/${matterandlight}
for i in "${activeDomains[@]}"
do
cat "$i" | tr -d '\r' >> $piholeDir/$matterandlight
cat "$i" | tr -d '\r' >> ${piholeDir}/${matterandlight}
done
echo " done!"
}
@ -212,7 +224,7 @@ function gravity_Schwarzchild() {
function gravity_Blacklist(){
# Append blacklist entries if they exist
echo -n "::: Running blacklist script to update HOSTS file...."
$blacklistScript -f -nr -q > /dev/null
${blacklistScript} -f -nr -q > /dev/null
numBlacklisted=$(wc -l < "/etc/pihole/blacklist.txt")
plural=; [[ "$numBlacklisted" != "1" ]] && plural=s
@ -229,12 +241,12 @@ function gravity_Whitelist() {
for url in "${sources[@]}"
do
tmp=$(echo "$url" | awk -F '/' '{print $3}')
urls=("${urls[@]}" $tmp)
urls=("${urls[@]}" ${tmp})
done
echo " done!"
echo -n "::: Running whitelist script to update HOSTS file...."
$whitelistScript -f -nr -q "${urls[@]}" > /dev/null
${whitelistScript} -f -nr -q "${urls[@]}" > /dev/null
numWhitelisted=$(wc -l < "/etc/pihole/whitelist.txt")
plural=; [[ "$numWhitelisted" != "1" ]] && plural=s
echo " $numWhitelisted domain${plural} whitelisted!"
@ -243,9 +255,9 @@ function gravity_Whitelist() {
function gravity_unique() {
# Sort and remove duplicates
echo -n "::: Removing duplicate domains...."
sort -u $piholeDir/$supernova > $piholeDir/$eventHorizon
sort -u ${piholeDir}/${supernova} > ${piholeDir}/${eventHorizon}
echo " done!"
numberOf=$(wc -l < $piholeDir/$eventHorizon)
numberOf=$(wc -l < ${piholeDir}/${eventHorizon})
echo "::: $numberOf unique domains trapped in the event horizon."
}
@ -254,25 +266,25 @@ function gravity_hostFormat() {
echo "::: Formatting domains into a HOSTS file..."
hostname=$(</etc/hostname)
# If there is a value in the $piholeIPv6, then IPv6 will be used, so the awk command modified to create a line for both protocols
if [[ -n $piholeIPv6 ]];then
if [[ -n ${piholeIPv6} ]];then
# Add hostname and dummy domain to the top of gravity.list to make ping result return a friendlier looking domain! Also allows for an easy way to access the Pi-hole admin console (pi.hole/admin)
echo -e "$piholeIP $hostname\n$piholeIPv6 $hostname\n$piholeIP pi.hole\n$piholeIPv6 pi.hole" > $piholeDir/$accretionDisc
cat $piholeDir/$eventHorizon | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $piholeDir/$accretionDisc
echo -e "$piholeIP $hostname\n$piholeIPv6 $hostname\n$piholeIP pi.hole\n$piholeIPv6 pi.hole" > ${piholeDir}/${accretionDisc}
cat ${piholeDir}/${eventHorizon} | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> ${piholeDir}/${accretionDisc}
else
# Otherwise, just create gravity.list as normal using IPv4
# Add hostname and dummy domain to the top of gravity.list to make ping result return a friendlier looking domain! Also allows for an easy way to access the Pi-hole admin console (pi.hole/admin)
echo -e "$piholeIP $hostname\n$piholeIP pi.hole" > $piholeDir/$accretionDisc
cat $piholeDir/$eventHorizon | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >> $piholeDir/$accretionDisc
echo -e "$piholeIP $hostname\n$piholeIP pi.hole" > ${piholeDir}/${accretionDisc}
cat ${piholeDir}/${eventHorizon} | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >> ${piholeDir}/${accretionDisc}
fi
# Copy the file over as /etc/pihole/gravity.list so dnsmasq can use it
cp $piholeDir/$accretionDisc $adList
cp ${piholeDir}/${accretionDisc} ${adList}
}
# blackbody - remove any remnant files from script processes
function gravity_blackbody() {
# Loop through list files
for file in $piholeDir/*.$justDomainsExtension
for file in ${piholeDir}/*.${justDomainsExtension}
do
# If list is in active array then leave it (noop) else rm the list
if [[ " ${activeDomains[@]} " =~ ${file} ]]; then
@ -289,10 +301,10 @@ function gravity_advanced() {
# This helps with that and makes it easier to read
# It also helps with debugging so each stage of the script can be researched more in depth
echo -n "::: Formatting list of domains to remove comments...."
awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' $piholeDir/$matterandlight | sed -nr -e 's/\.{2,}/./g' -e '/\./p' > $piholeDir/$supernova
awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' ${piholeDir}/${matterandlight} | sed -nr -e 's/\.{2,}/./g' -e '/\./p' > ${piholeDir}/${supernova}
echo " done!"
numberOf=$(wc -l < $piholeDir/$supernova)
numberOf=$(wc -l < ${piholeDir}/${supernova})
echo "::: $numberOf domains being pulled in by gravity..."
gravity_unique
@ -302,7 +314,7 @@ function gravity_reload() {
#Clear no longer needed files...
echo ":::"
echo -n "::: Cleaning up un-needed files..."
$SUDO rm $piholeDir/pihole.*.txt
${SUDO} rm ${piholeDir}/pihole.*.txt
echo " done!"
# Reload hosts file
@ -313,22 +325,39 @@ function gravity_reload() {
#First escape forward slashes in the path:
adList=${adList//\//\\\/}
#Now replace the line in dnsmasq file
$SUDO sed -i "s/^addn-hosts.*/addn-hosts=$adList/" /etc/dnsmasq.d/01-pihole.conf
${SUDO} sed -i "s/^addn-hosts.*/addn-hosts=$adList/" /etc/dnsmasq.d/01-pihole.conf
dnsmasqPid=$(pidof dnsmasq)
find "$piholeDir" -type f -exec $SUDO chmod 666 {} \;
find "$piholeDir" -type f -exec ${SUDO} chmod 666 {} \;
if [[ $dnsmasqPid ]]; then
if [[ ${dnsmasqPid} ]]; then
# service already running - reload config
$SUDO killall -s HUP dnsmasq
${SUDO} killall -s HUP dnsmasq
else
# service not running, start it up
$SUDO service dnsmasq start
${SUDO} service dnsmasq start
fi
echo " done!"
}
$SUDO cp /etc/.pihole/adlists.default /etc/pihole/adlists.default
for var in "$@"
do
case "$var" in
"-f" | "--force" ) forceGrav=true;;
"-h" | "--help" ) helpFunc;;
esac
done
#Overwrite adlists.default from /etc/.pihole in case any changes have been made. Changes should be saved in /etc/adlists.list
if [[ ${forceGrav} == true ]]; then
echo -n "::: Deleting exising list cache..."
${SUDO} rm /etc/pihole/list.*
echo " done!"
fi
${SUDO} cp /etc/.pihole/adlists.default /etc/pihole/adlists.default
gravity_collapse
gravity_spinup
gravity_Schwarzchild

51
pihole
View file

@ -27,50 +27,69 @@ fi
function whitelistFunc {
shift
$SUDO /opt/pihole/whitelist.sh "$@"
${SUDO} /opt/pihole/whitelist.sh "$@"
exit 1
}
function blacklistFunc {
shift
$SUDO /opt/pihole/blacklist.sh "$@"
${SUDO} /opt/pihole/blacklist.sh "$@"
exit 1
}
function debugFunc {
$SUDO /opt/pihole/piholeDebug.sh
${SUDO} /opt/pihole/piholeDebug.sh
exit 1
}
function flushFunc {
$SUDO /opt/pihole/piholeLogFlush.sh
${SUDO} /opt/pihole/piholeLogFlush.sh
exit 1
}
function updateDashboardFunc {
$SUDO /opt/pihole/updateDashboard.sh
${SUDO} /opt/pihole/updateDashboard.sh
exit 1
}
function updatePiholeFunc {
echo "::: Fetching latest changes from Github..."
cd /etc/.pihole
${SUDO} git pull
${SUDO} /etc/.pihole/automated\ install/basic-install.sh pihole
exit 1
}
function updateGravityFunc {
$SUDO /opt/pihole/gravity.sh
${SUDO} /opt/pihole/gravity.sh "$@"
exit 1
}
function setupLCDFunction {
$SUDO /opt/pihole/setupLCD.sh
${SUDO} /opt/pihole/setupLCD.sh
exit 1
}
function queryFunc {
domain=$2
for list in /etc/pihole/list.*;do echo $list;grep ${domain} $list;done
exit 1
}
function chronometerFunc {
shift
$SUDO /opt/pihole/chronometer.sh "$@"
${SUDO} /opt/pihole/chronometer.sh "$@"
exit 1
}
function uninstallFunc {
$SUDO /opt/pihole/uninstall.sh
${SUDO} /opt/pihole/uninstall.sh
exit 1
}
function versionFunc {
${SUDO} /opt/pihole/version.sh
exit 1
}
@ -85,12 +104,15 @@ function helpFunc {
echo "::: -b, blacklist Blacklist domains"
echo "::: -d, debug Start a debugging session if having trouble"
echo "::: -f, flush Flush the pihole.log file"
echo "::: -u, updateDashboard Update the web dashboard manually"
echo "::: -ud, updateDashboard Update the web dashboard manually"
echo "::: -up, updatePihole Update Pi-hole"
echo "::: -g, updateGravity Update the list of ad-serving domains"
echo "::: -s, setupLCD Automatically configures the Pi to use the 2.8 LCD screen to display stats on it"
echo "::: -c, chronometer Calculates stats and displays to an LCD"
echo "::: -h, help Show this help dialog"
echo "::: uninstall Uninstall Pi-Hole from your system!"
echo "::: -v, version Show current versions"
echo "::: -q, query Query the adlists for a specific domain"
echo "::: uninstall Uninstall Pi-Hole from your system :(!"
exit 1
}
@ -104,11 +126,14 @@ case "$1" in
"-b" | "blacklist" ) blacklistFunc "$@";;
"-d" | "debug" ) debugFunc;;
"-f" | "flush" ) flushFunc;;
"-u" | "updateDashboard" ) updateDashboardFunc;;
"-g" | "updateGravity" ) updateGravityFunc;;
"-ud" | "updateDashboard" ) updateDashboardFunc;;
"-up" | "updatePihole" ) updatePiholeFunc;;
"-g" | "updateGravity" ) updateGravityFunc "$@";;
"-s" | "setupLCD" ) setupLCDFunction;;
"-c" | "chronometer" ) chronometerFunc "$@";;
"-h" | "help" ) helpFunc;;
"-v" | "version" ) versionFunc;;
"-q" | "query" ) queryFunc "$@";;
"uninstall" ) uninstallFunc;;
* ) helpFunc;;
esac