mirror of
https://github.com/pi-hole/pi-hole.git
synced 2024-11-15 02:42:58 +00:00
Clean up known remaining colour output issues (#1613)
* Print newline on error message * Output last three lines of error if update fails * Consistent error messages & housekeeping * Add shellcheck directive to ignore COL_TABLE * Quoted and braced variables for codebase consistency * Escaped newlines correctly * Made error messages consistent (indenting and wording) * Removed consecutive echos * Conditional formatting consistency * Braced, quoted and used [[ on conditionals * Fix specific ShellCheck issues * Fixed issues that could be safely changed without extensive testing * Update SELinux whiptail behaviour & more * Colourised some strings * Fixed multiple line string indenting * Made output consistent with existing codebase * Removed sequential echos * Make SELinux whiptail use "--defaultno", and change text wording * Add help text for hostrecord, and colourise output * this should fix the tests... Signed-off-by: Adam Warner <adamw@rner.email> * revert changes to `update_package_cache()` to prove tests Signed-off-by: Adam Warner <adamw@rner.email>
This commit is contained in:
WaLLy3K
Adam Warner
parent
b09c660833
commit
fdf2649f2f
4 changed files with 194 additions and 191 deletions
|
|
@ -19,10 +19,9 @@ readonly PI_HOLE_FILES_DIR="/etc/.pihole"
|
|||
# shellcheck disable=SC2034
|
||||
PH_TEST=true
|
||||
|
||||
# Have to ignore the following rule as spaces in paths are not supported by ShellCheck
|
||||
#shellcheck disable=SC1090
|
||||
# shellcheck disable=SC1090
|
||||
source "${PI_HOLE_FILES_DIR}/automated install/basic-install.sh"
|
||||
|
||||
# shellcheck disable=SC1091
|
||||
source "/opt/pihole/COL_TABLE"
|
||||
|
||||
# is_repo() sourced from basic-install.sh
|
||||
|
|
@ -51,15 +50,15 @@ GitCheckUpdateAvail() {
|
|||
# defaults to the current one.
|
||||
REMOTE="$(git rev-parse "@{upstream}")"
|
||||
|
||||
if [[ ${#LOCAL} == 0 ]]; then
|
||||
echo -e " ${COL_LIGHT_RED}Error: Local revision could not be obtained, ask Pi-hole support."
|
||||
echo -e " Additional debugging output:${COL_NC}"
|
||||
if [[ "${#LOCAL}" == 0 ]]; then
|
||||
echo -e "\\n ${COL_LIGHT_RED}Error: Local revision could not be obtained, please contact Pi-hole Support
|
||||
Additional debugging output:${COL_NC}"
|
||||
git status
|
||||
exit
|
||||
fi
|
||||
if [[ ${#REMOTE} == 0 ]]; then
|
||||
echo -e " ${COL_LIGHT_RED}Error: Remote revision could not be obtained, ask Pi-hole support."
|
||||
echo -e " Additional debugging output:${COL_NC}"
|
||||
if [[ "${#REMOTE}" == 0 ]]; then
|
||||
echo -e "\\n ${COL_LIGHT_RED}Error: Remote revision could not be obtained, please contact Pi-hole Support
|
||||
Additional debugging output:${COL_NC}"
|
||||
git status
|
||||
exit
|
||||
fi
|
||||
|
|
@ -94,13 +93,15 @@ FTLcheckUpdate() {
|
|||
main() {
|
||||
local pihole_version_current
|
||||
local web_version_current
|
||||
#shellcheck disable=1090,2154
|
||||
local basicError="\\n ${COL_LIGHT_RED}Unable to complete update, please contact Pi-hole Support${COL_NC}"
|
||||
|
||||
# shellcheck disable=1090,2154
|
||||
source "${setupVars}"
|
||||
|
||||
#This is unlikely
|
||||
# This is unlikely
|
||||
if ! is_repo "${PI_HOLE_FILES_DIR}" ; then
|
||||
echo -e " ${COL_LIGHT_RED}Critical Error: Core Pi-hole repo is missing from system!"
|
||||
echo -e " Please re-run install script from https://github.com/pi-hole/pi-hole${COL_NC}"
|
||||
echo -e "\\n ${COL_LIGHT_RED}Error: Core Pi-hole repo is missing from system!
|
||||
Please re-run install script from https://pi-hole.net${COL_NC}"
|
||||
exit 1;
|
||||
fi
|
||||
|
||||
|
|
@ -108,18 +109,18 @@ main() {
|
|||
|
||||
if GitCheckUpdateAvail "${PI_HOLE_FILES_DIR}" ; then
|
||||
core_update=true
|
||||
echo -e " ${INFO} Pi-hole Core:\t${COL_YELLOW}update available${COL_NC}"
|
||||
echo -e " ${INFO} Pi-hole Core:\\t${COL_YELLOW}update available${COL_NC}"
|
||||
else
|
||||
core_update=false
|
||||
echo -e " ${INFO} Pi-hole Core:\t${COL_LIGHT_GREEN}up to date${COL_NC}"
|
||||
echo -e " ${INFO} Pi-hole Core:\\t${COL_LIGHT_GREEN}up to date${COL_NC}"
|
||||
fi
|
||||
|
||||
if FTLcheckUpdate ; then
|
||||
FTL_update=true
|
||||
echo -e " ${INFO} FTL:\t\t${COL_YELLOW}update available${COL_NC}"
|
||||
echo -e " ${INFO} FTL:\\t\\t${COL_YELLOW}update available${COL_NC}"
|
||||
else
|
||||
FTL_update=false
|
||||
echo -e " ${INFO} FTL:\t\t${COL_LIGHT_GREEN}up to date${COL_NC}"
|
||||
echo -e " ${INFO} FTL:\\t\\t${COL_LIGHT_GREEN}up to date${COL_NC}"
|
||||
fi
|
||||
|
||||
# Logic: Don't update FTL when there is a core update available
|
||||
|
|
@ -132,19 +133,19 @@ main() {
|
|||
echo ""
|
||||
fi
|
||||
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
if ! is_repo "${ADMIN_INTERFACE_DIR}" ; then
|
||||
echo -e " ${COL_LIGHT_RED}Critical Error: Web Admin repo is missing from system!"
|
||||
echo -e " Please re-run install script from https://github.com/pi-hole/pi-hole${COL_NC}"
|
||||
echo -e "\\n ${COL_LIGHT_RED}Error: Web Admin repo is missing from system!
|
||||
Please re-run install script from https://pi-hole.net${COL_NC}"
|
||||
exit 1;
|
||||
fi
|
||||
|
||||
if GitCheckUpdateAvail "${ADMIN_INTERFACE_DIR}" ; then
|
||||
web_update=true
|
||||
echo -e " ${INFO} Web Interface:\t${COL_YELLOW}update available${COL_NC}"
|
||||
echo -e " ${INFO} Web Interface:\\t${COL_YELLOW}update available${COL_NC}"
|
||||
else
|
||||
web_update=false
|
||||
echo -e " ${INFO} Web Interface:\t${COL_LIGHT_GREEN}up to date${COL_NC}"
|
||||
echo -e " ${INFO} Web Interface:\\t${COL_LIGHT_GREEN}up to date${COL_NC}"
|
||||
fi
|
||||
|
||||
# Logic
|
||||
|
|
@ -163,25 +164,24 @@ main() {
|
|||
echo -e " ${TICK} Everything is up to date!"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
elif ! ${core_update} && ${web_update} ; then
|
||||
echo ""
|
||||
echo -e " ${INFO} Pi-hole Web Admin files out of date"
|
||||
getGitFiles "${ADMIN_INTERFACE_DIR}" "${ADMIN_INTERFACE_GIT_URL}"
|
||||
|
||||
elif ${core_update} && ! ${web_update} ; then
|
||||
echo ""
|
||||
echo -e " ${INFO} Pi-hole core files out of date"
|
||||
getGitFiles "${PI_HOLE_FILES_DIR}" "${PI_HOLE_GIT_URL}"
|
||||
${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --reconfigure --unattended || echo -e " ${COL_LIGHT_RED}Unable to complete update, contact Pi-hole${COL_NC}" && exit 1
|
||||
|
||||
${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --reconfigure --unattended || \
|
||||
echo -e "${basicError}" && exit 1
|
||||
elif ${core_update} && ${web_update} ; then
|
||||
echo ""
|
||||
echo -e " ${INFO} Updating Pi-hole core and web admin files"
|
||||
getGitFiles "${PI_HOLE_FILES_DIR}" "${PI_HOLE_GIT_URL}"
|
||||
${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --unattended || echo -e " ${COL_LIGHT_RED}Unable to complete update, contact Pi-hole${COL_NC}" && exit 1
|
||||
${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --unattended || \
|
||||
echo -e "${basicError}" && exit 1
|
||||
else
|
||||
echo -e " ${COL_LIGHT_RED}Update script has malfunctioned, fallthrough reached. Please contact support${COL_NC}"
|
||||
echo -e " ${COL_LIGHT_RED}Update script has malfunctioned, please contact Pi-hole Support${COL_NC}"
|
||||
exit 1
|
||||
fi
|
||||
else # Web Admin not installed, so only verify if core is up to date
|
||||
|
|
@ -193,38 +193,36 @@ main() {
|
|||
fi
|
||||
else
|
||||
echo ""
|
||||
echo -e " ${INFO} Pi-hole core files out of date"
|
||||
echo -e " ${INFO} Pi-hole Core files out of date"
|
||||
getGitFiles "${PI_HOLE_FILES_DIR}" "${PI_HOLE_GIT_URL}"
|
||||
${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --reconfigure --unattended || echo -e " ${COL_LIGHT_RED}Unable to complete update, contact Pi-hole${COL_NC}" && exit 1
|
||||
${PI_HOLE_FILES_DIR}/automated\ install/basic-install.sh --reconfigure --unattended || \
|
||||
echo -e "${basicError}" && exit 1
|
||||
fi
|
||||
fi
|
||||
|
||||
if [[ "${web_update}" == true ]]; then
|
||||
web_version_current="$(/usr/local/bin/pihole version --admin --current)"
|
||||
echo ""
|
||||
echo -e " ${INFO} Web Admin version is now at ${web_version_current/* v/v}"
|
||||
echo -e " ${INFO} If you had made any changes in '/var/www/html/admin/', they have been stashed using 'git stash'"
|
||||
echo -e " ${INFO} Web Admin version is now at ${web_version_current/* v/v}
|
||||
${INFO} If you had made any changes in '/var/www/html/admin/', they have been stashed using 'git stash'"
|
||||
fi
|
||||
|
||||
if [[ "${core_update}" == true ]]; then
|
||||
pihole_version_current="$(/usr/local/bin/pihole version --pihole --current)"
|
||||
echo ""
|
||||
echo -e " ${INFO} Pi-hole version is now at ${pihole_version_current/* v/v}"
|
||||
echo -e " ${INFO} If you had made any changes in '/etc/.pihole/', they have been stashed using 'git stash'"
|
||||
echo -e " ${INFO} Pi-hole version is now at ${pihole_version_current/* v/v}
|
||||
${INFO} If you had made any changes in '/etc/.pihole/', they have been stashed using 'git stash'"
|
||||
fi
|
||||
|
||||
if [[ ${FTL_update} == true ]]; then
|
||||
if [[ "${FTL_update}" == true ]]; then
|
||||
FTL_version_current="$(/usr/bin/pihole-FTL tag)"
|
||||
echo ""
|
||||
echo -e " ${INFO} FTL version is now at ${FTL_version_current/* v/v}"
|
||||
echo -e "\\n ${INFO} FTL version is now at ${FTL_version_current/* v/v}"
|
||||
start_service pihole-FTL
|
||||
enable_service pihole-FTL
|
||||
fi
|
||||
|
||||
|
||||
echo ""
|
||||
exit 0
|
||||
|
||||
}
|
||||
|
||||
main
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@ Options:
|
|||
-c, celsius Set Celsius as preferred temperature unit
|
||||
-f, fahrenheit Set Fahrenheit as preferred temperature unit
|
||||
-k, kelvin Set Kelvin as preferred temperature unit
|
||||
-r, hostrecord Add a name to the DNS associated to an IPv4/IPv6 address
|
||||
-h, --help Show this help dialog
|
||||
-i, interface Specify dnsmasq's interface listening behavior
|
||||
Add '-h' for more info on interface usage"
|
||||
|
|
@ -392,12 +393,23 @@ RemoveDHCPStaticAddress() {
|
|||
}
|
||||
|
||||
SetHostRecord() {
|
||||
if [ -n "${args[3]}" ]; then
|
||||
if [[ "${1}" == "-h" ]] || [[ "${1}" == "--help" ]]; then
|
||||
echo "Usage: pihole -a hostrecord <domain> [IPv4-address],[IPv6-address]
|
||||
Example: 'pihole -a hostrecord home.domain.com 192.168.1.1,2001:db8:a0b:12f0::1'
|
||||
Add a name to the DNS associated to an IPv4/IPv6 address
|
||||
|
||||
Options:
|
||||
\"\" Empty: Remove host record
|
||||
-h, --help Show this help dialog"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
if [[ -n "${args[3]}" ]]; then
|
||||
change_setting "HOSTRECORD" "${args[2]},${args[3]}"
|
||||
echo "Setting host record for ${args[2]} -> ${args[3]}"
|
||||
echo -e " ${TICK} Setting host record for ${args[2]} to ${args[3]}"
|
||||
else
|
||||
change_setting "HOSTRECORD" ""
|
||||
echo "Removing host record"
|
||||
echo -e " ${TICK} Removing host record"
|
||||
fi
|
||||
|
||||
ProcessDNSSettings
|
||||
|
|
@ -474,7 +486,7 @@ main() {
|
|||
"resolve" ) ResolutionSettings;;
|
||||
"addstaticdhcp" ) AddDHCPStaticAddress;;
|
||||
"removestaticdhcp" ) RemoveDHCPStaticAddress;;
|
||||
"hostrecord" ) SetHostRecord;;
|
||||
"-r" | "hostrecord" ) SetHostRecord "$3";;
|
||||
"-i" | "interface" ) SetListeningMode "$@";;
|
||||
"-t" | "teleporter" ) Teleporter;;
|
||||
"adlist" ) CustomizeAdLists;;
|
||||
|
|
|
|||
|
|
@ -1,22 +1,21 @@
|
|||
#!/usr/bin/env bash
|
||||
# shellcheck disable=SC1090
|
||||
|
||||
# Pi-hole: A black hole for Internet advertisements
|
||||
# (c) 2017 Pi-hole, LLC (https://pi-hole.net)
|
||||
# Network-wide ad blocking via your own hardware.
|
||||
#
|
||||
# Installs Pi-hole
|
||||
# Installs and Updates Pi-hole
|
||||
#
|
||||
# This file is copyright under the latest version of the EUPL.
|
||||
# Please see LICENSE file for your rights under this license.
|
||||
|
||||
|
||||
|
||||
# pi-hole.net/donate
|
||||
#
|
||||
# Install with this command (from your Linux machine):
|
||||
#
|
||||
# curl -L install.pi-hole.net | bash
|
||||
|
||||
|
||||
# -e option instructs bash to immediately exit if any command [1] has a non-zero exit status
|
||||
# We do not want users to end up with a partially working install, so we exit the script
|
||||
# instead of continuing the installation with something broken
|
||||
|
|
@ -35,6 +34,7 @@ instalLogLoc=/etc/pihole/install.log
|
|||
# This is an important file as it contains information specific to the machine it's being installed on
|
||||
setupVars=/etc/pihole/setupVars.conf
|
||||
# Pi-hole uses lighttpd as a Web server, and this is the config file for it
|
||||
# shellcheck disable=SC2034
|
||||
lighttpdConfig=/etc/lighttpd/lighttpd.conf
|
||||
# This is a file used for the colorized output
|
||||
coltable=/opt/pihole/COL_TABLE
|
||||
|
|
@ -79,7 +79,7 @@ reconfigure=false
|
|||
runUnattended=false
|
||||
|
||||
# If the color table file exists,
|
||||
if [[ -f ${coltable} ]]; then
|
||||
if [[ -f "${coltable}" ]]; then
|
||||
# source it
|
||||
source ${coltable}
|
||||
# Othwerise,
|
||||
|
|
@ -91,8 +91,9 @@ else
|
|||
TICK="[${COL_LIGHT_GREEN}✓${COL_NC}]"
|
||||
CROSS="[${COL_LIGHT_RED}✗${COL_NC}]"
|
||||
INFO="[i]"
|
||||
# shellcheck disable=SC2034
|
||||
DONE="${COL_LIGHT_GREEN} done!${COL_NC}"
|
||||
OVER="\r\033[K"
|
||||
OVER="\\r\\033[K"
|
||||
fi
|
||||
|
||||
# A simple function that just echoes out our logo in ASCII format
|
||||
|
|
@ -122,7 +123,6 @@ show_ascii_berry() {
|
|||
"
|
||||
}
|
||||
|
||||
|
||||
# Compatibility
|
||||
distro_check() {
|
||||
# If apt-get is installed, then we know it's part of the Debian family
|
||||
|
|
@ -321,13 +321,13 @@ getGitFiles() {
|
|||
# Show that we're checking it
|
||||
echo -e "${OVER} ${TICK} ${str}"
|
||||
# Update the repo, returning an error message on failure
|
||||
update_repo "${directory}" || { echo -e "\n ${COL_LIGHT_RED}Error: Could not update local repository. Contact support.${COL_NC}"; exit 1; }
|
||||
update_repo "${directory}" || { echo -e "\\n ${COL_LIGHT_RED}Error: Could not update local repository. Contact support.${COL_NC}"; exit 1; }
|
||||
# If it's not a .git repo,
|
||||
else
|
||||
# Show an error
|
||||
echo -e "${OVER} ${CROSS} ${str}"
|
||||
# Attempt to make the repository, showing an error on falure
|
||||
make_repo "${directory}" "${remoteRepo}" || { echo -e "\n ${COL_LIGHT_RED}Error: Could not update local repository. Contact support.${COL_NC}"; exit 1; }
|
||||
make_repo "${directory}" "${remoteRepo}" || { echo -e "\\n ${COL_LIGHT_RED}Error: Could not update local repository. Contact support.${COL_NC}"; exit 1; }
|
||||
fi
|
||||
# echo a blank line
|
||||
echo ""
|
||||
|
|
@ -380,13 +380,13 @@ get_available_interfaces() {
|
|||
# A function for displaying the dialogs the user sees when first running the installer
|
||||
welcomeDialogs() {
|
||||
# Display the welcome dialog using an approriately sized window via the calculation conducted earlier in the script
|
||||
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "\n\nThis installer will transform your device into a network-wide ad blocker!" ${r} ${c}
|
||||
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "\\n\\nThis installer will transform your device into a network-wide ad blocker!" ${r} ${c}
|
||||
|
||||
# Request that users donate if they enjoy the software since we all work on it in our free time
|
||||
whiptail --msgbox --backtitle "Plea" --title "Free and open source" "\n\nThe Pi-hole is free, but powered by your donations: http://pi-hole.net/donate" ${r} ${c}
|
||||
whiptail --msgbox --backtitle "Plea" --title "Free and open source" "\\n\\nThe Pi-hole is free, but powered by your donations: http://pi-hole.net/donate" ${r} ${c}
|
||||
|
||||
# Explain the need for a static address
|
||||
whiptail --msgbox --backtitle "Initiating network interface" --title "Static IP Needed" "\n\nThe Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
|
||||
whiptail --msgbox --backtitle "Initiating network interface" --title "Static IP Needed" "\\n\\nThe Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
|
||||
|
||||
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." ${r} ${c}
|
||||
}
|
||||
|
|
@ -400,7 +400,8 @@ verifyFreeDiskSpace() {
|
|||
# Reqired space in KB
|
||||
local required_free_kilobytes=51200
|
||||
# Calculate existing free space on this machine
|
||||
local existing_free_kilobytes=$(df -Pk | grep -m1 '\/$' | awk '{print $4}')
|
||||
local existing_free_kilobytes
|
||||
existing_free_kilobytes=$(df -Pk | grep -m1 '\/$' | awk '{print $4}')
|
||||
|
||||
# If the existing space is not an integer,
|
||||
if ! [[ "${existing_free_kilobytes}" =~ ^([0-9])+$ ]]; then
|
||||
|
|
@ -414,7 +415,7 @@ verifyFreeDiskSpace() {
|
|||
# exit with an error code
|
||||
exit 1
|
||||
# If there is insufficient free disk space,
|
||||
elif [[ ${existing_free_kilobytes} -lt ${required_free_kilobytes} ]]; then
|
||||
elif [[ "${existing_free_kilobytes}" -lt "${required_free_kilobytes}" ]]; then
|
||||
# show an error message
|
||||
echo -e " ${CROSS} ${str}
|
||||
Your system disk appears to only have ${existing_free_kilobytes} KB free
|
||||
|
|
@ -428,7 +429,7 @@ verifyFreeDiskSpace() {
|
|||
e.g: curl -L https://install.pi-hole.net | bash"
|
||||
fi
|
||||
# Show there is not enough free space
|
||||
echo -e "\n ${COL_LIGHT_RED}Insufficient free space, exiting...${COL_NC}"
|
||||
echo -e "\\n ${COL_LIGHT_RED}Insufficient free space, exiting...${COL_NC}"
|
||||
# and exit with an error
|
||||
exit 1
|
||||
# Otherwise,
|
||||
|
|
@ -455,7 +456,7 @@ chooseInterface() {
|
|||
interfaceCount=$(echo "${availableInterfaces}" | wc -l)
|
||||
|
||||
# If there is one interface,
|
||||
if [[ ${interfaceCount} -eq 1 ]]; then
|
||||
if [[ "${interfaceCount}" -eq 1 ]]; then
|
||||
# Set it as the interface to use since there is no other option
|
||||
PIHOLE_INTERFACE="${availableInterfaces}"
|
||||
# Otherwise,
|
||||
|
|
@ -465,7 +466,7 @@ chooseInterface() {
|
|||
# use a variable to set the option as OFF to begin with
|
||||
mode="OFF"
|
||||
# If it's the first loop,
|
||||
if [[ ${firstLoop} -eq 1 ]]; then
|
||||
if [[ "${firstLoop}" -eq 1 ]]; then
|
||||
# set this as the interface to use (ON)
|
||||
firstLoop=0
|
||||
mode="ON"
|
||||
|
|
@ -501,11 +502,11 @@ testIPv6() {
|
|||
# will contain 162 which is the decimal value corresponding to 0xa2
|
||||
value2=$(((0x$first)%256))
|
||||
# the ULA test is testing for fc00::/7 according to RFC 4193
|
||||
((($value1&254)==252)) && echo "ULA" || true
|
||||
(((value1&254)==252)) && echo "ULA" || true
|
||||
# the GUA test is testing for 2000::/3 according to RFC 4291
|
||||
((($value1&112)==32)) && echo "GUA" || true
|
||||
(((value1&112)==32)) && echo "GUA" || true
|
||||
# the LL test is testing for fe80::/10 according to RFC 4193
|
||||
((($value1==254) && (($value2&192)==128))) && echo "Link-local" || true
|
||||
(((value1==254) && ((value2&192)==128))) && echo "Link-local" || true
|
||||
}
|
||||
|
||||
# A dialog for showing the user about IPv6 blocking
|
||||
|
|
@ -529,17 +530,17 @@ useIPv6dialog() {
|
|||
# set the IPv6 address to the ULA address
|
||||
IPV6_ADDRESS="${ULA_ADDRESS}"
|
||||
# Show this info to the user
|
||||
echo "::: Found IPv6 ULA address, using it for blocking IPv6 ads"
|
||||
echo -e " ${INFO} Found IPv6 ULA address, using it for blocking IPv6 ads"
|
||||
# Otherwise, if the GUA_ADDRESS has a value,
|
||||
elif [[ ! -z "${GUA_ADDRESS}" ]]; then
|
||||
# Let the user know
|
||||
echo "::: Found IPv6 GUA address, using it for blocking IPv6 ads"
|
||||
echo -e " ${INFO} Found IPv6 GUA address, using it for blocking IPv6 ads"
|
||||
# And assign it to the global variable
|
||||
IPV6_ADDRESS="${GUA_ADDRESS}"
|
||||
# If none of those work,
|
||||
else
|
||||
# explain that IPv6 blocking will not be used
|
||||
echo "::: Found neither IPv6 ULA nor GUA address, blocking IPv6 ads will not be enabled"
|
||||
echo -e " ${INFO} Unable to find IPv6 ULA/GUA address, IPv6 adblocking will not be enabled"
|
||||
# So set the variable to be empty
|
||||
IPV6_ADDRESS=""
|
||||
fi
|
||||
|
|
@ -575,14 +576,14 @@ use4andor6() {
|
|||
esac
|
||||
done
|
||||
# If IPv4 is to be used,
|
||||
if [[ ${useIPv4} ]]; then
|
||||
if [[ "${useIPv4}" ]]; then
|
||||
# Run our function to get the information we need
|
||||
find_IPv4_information
|
||||
getStaticIPv4Settings
|
||||
setStaticIPv4
|
||||
fi
|
||||
# If IPv6 is to be used,
|
||||
if [[ ${useIPv6} ]]; then
|
||||
if [[ "${useIPv6}" ]]; then
|
||||
# Run our function to get this information
|
||||
useIPv6dialog
|
||||
fi
|
||||
|
|
@ -590,7 +591,7 @@ use4andor6() {
|
|||
echo -e " ${INFO} IPv4 address: ${IPV4_ADDRESS}"
|
||||
echo -e " ${INFO} IPv6 address: ${IPV6_ADDRESS}"
|
||||
# If neither protocol is selected,
|
||||
if [ ! ${useIPv4} ] && [ ! ${useIPv6} ]; then
|
||||
if [[ ! "${useIPv4}" ]] && [[ ! "${useIPv6}" ]]; then
|
||||
# Show an error in red
|
||||
echo -e " ${COL_LIGHT_RED}Error: Neither IPv4 or IPv6 selected${COL_NC}"
|
||||
# and exit with an error
|
||||
|
|
@ -616,7 +617,7 @@ It is also possible to use a DHCP reservation, but if you are going to do that,
|
|||
# Otherwise, we need to ask the user to input their desired settings.
|
||||
# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
|
||||
# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
|
||||
until [[ ${ipSettingsCorrect} = True ]]; do
|
||||
until [[ "${ipSettingsCorrect}" = True ]]; do
|
||||
|
||||
# Ask for the IPv4 address
|
||||
IPV4_ADDRESS=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" ${r} ${c} "${IPV4_ADDRESS}" 3>&1 1>&2 2>&3) || \
|
||||
|
|
@ -660,7 +661,7 @@ setStaticIPv4() {
|
|||
local IPADDR
|
||||
local CIDR
|
||||
# For the Debian family, if dhcpcd.conf exists,
|
||||
if [[ -f /etc/dhcpcd.conf ]]; then
|
||||
if [[ -f "/etc/dhcpcd.conf" ]]; then
|
||||
# check if the IP is already in the file
|
||||
if grep -q "${IPV4_ADDRESS}" /etc/dhcpcd.conf; then
|
||||
echo -e " ${INFO} Static IP already configured"
|
||||
|
|
@ -672,10 +673,10 @@ setStaticIPv4() {
|
|||
ip addr replace dev "${PIHOLE_INTERFACE}" "${IPV4_ADDRESS}"
|
||||
# Also give a warning that the user may need to reboot their system
|
||||
echo -e " ${TICK} Set IP address to ${IPV4_ADDRESS%/*}
|
||||
You may need to restart after the install is complete"
|
||||
You may need to restart after the install is complete"
|
||||
fi
|
||||
# If it's not Debian, check if it's the Fedora family by checking for the file below
|
||||
elif [[ -f /etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE} ]];then
|
||||
elif [[ -f "/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE}" ]];then
|
||||
# If it exists,
|
||||
IFCFG_FILE=/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE}
|
||||
# check if the desired IP is already set
|
||||
|
|
@ -710,7 +711,7 @@ setStaticIPv4() {
|
|||
fi
|
||||
# Show a warning that the user may need to restart
|
||||
echo -e " ${TICK} Set IP address to ${IPV4_ADDRESS%/*}
|
||||
You may need to restart after the install is complete"
|
||||
You may need to restart after the install is complete"
|
||||
fi
|
||||
# If all that fails,
|
||||
else
|
||||
|
|
@ -727,7 +728,7 @@ valid_ip() {
|
|||
local stat=1
|
||||
|
||||
# If the IP matches the format xxx.xxx.xxx.xxx,
|
||||
if [[ ${ip} =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
|
||||
if [[ "${ip}" =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
|
||||
# Save the old Interfal Field Separator in a variable
|
||||
OIFS=$IFS
|
||||
# and set the new one to a dot (period)
|
||||
|
|
@ -737,8 +738,8 @@ valid_ip() {
|
|||
# Restore the IFS to what it was
|
||||
IFS=${OIFS}
|
||||
## Evaluate each octet by checking if it's less than or equal to 255 (the max for each octet)
|
||||
[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
|
||||
&& ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
|
||||
[[ "${ip[0]}" -le 255 && "${ip[1]}" -le 255 \
|
||||
&& "${ip[2]}" -le 255 && "${ip[3]}" -le 255 ]]
|
||||
# Save the exit code
|
||||
stat=$?
|
||||
fi
|
||||
|
|
@ -801,13 +802,13 @@ setDNS() {
|
|||
;;
|
||||
Custom)
|
||||
# Until the DNS settings are selected,
|
||||
until [[ ${DNSSettingsCorrect} = True ]]; do
|
||||
until [[ "${DNSSettingsCorrect}" = True ]]; do
|
||||
#
|
||||
strInvalid="Invalid"
|
||||
# If the first
|
||||
if [ ! ${PIHOLE_DNS_1} ]; then
|
||||
if [[ ! "${PIHOLE_DNS_1}" ]]; then
|
||||
# and second upstream servers do not exist
|
||||
if [ ! ${PIHOLE_DNS_2} ]; then
|
||||
if [[ ! "${PIHOLE_DNS_2}" ]]; then
|
||||
#
|
||||
prePopulate=""
|
||||
# Otherwise,
|
||||
|
|
@ -816,39 +817,39 @@ setDNS() {
|
|||
prePopulate=", ${PIHOLE_DNS_2}"
|
||||
fi
|
||||
#
|
||||
elif [ ${PIHOLE_DNS_1} ] && [ ! ${PIHOLE_DNS_2} ]; then
|
||||
elif [[ "${PIHOLE_DNS_1}" ]] && [[ ! "${PIHOLE_DNS_2}" ]]; then
|
||||
#
|
||||
prePopulate="${PIHOLE_DNS_1}"
|
||||
#
|
||||
elif [ ${PIHOLE_DNS_1} ] && [ ${PIHOLE_DNS_2} ]; then
|
||||
elif [[ "${PIHOLE_DNS_1}" ]] && [[ "${PIHOLE_DNS_2}" ]]; then
|
||||
#
|
||||
prePopulate="${PIHOLE_DNS_1}, ${PIHOLE_DNS_2}"
|
||||
fi
|
||||
|
||||
# Dialog for the user to enter custom upstream servers
|
||||
piholeDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)" --inputbox "Enter your desired upstream DNS provider(s), seperated by a comma.\n\nFor example '8.8.8.8, 8.8.4.4'" ${r} ${c} "${prePopulate}" 3>&1 1>&2 2>&3) || \
|
||||
piholeDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)" --inputbox "Enter your desired upstream DNS provider(s), seperated by a comma.\\n\\nFor example '8.8.8.8, 8.8.4.4'" ${r} ${c} "${prePopulate}" 3>&1 1>&2 2>&3) || \
|
||||
{ echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
|
||||
#
|
||||
PIHOLE_DNS_1=$(echo "${piholeDNS}" | sed 's/[, \t]\+/,/g' | awk -F, '{print$1}')
|
||||
PIHOLE_DNS_2=$(echo "${piholeDNS}" | sed 's/[, \t]\+/,/g' | awk -F, '{print$2}')
|
||||
# If the IP is valid,
|
||||
if ! valid_ip "${PIHOLE_DNS_1}" || [ ! "${PIHOLE_DNS_1}" ]; then
|
||||
if ! valid_ip "${PIHOLE_DNS_1}" || [[ ! "${PIHOLE_DNS_1}" ]]; then
|
||||
# store it in the variable so we can use it
|
||||
PIHOLE_DNS_1=${strInvalid}
|
||||
fi
|
||||
# Do the same for the secondary server
|
||||
if ! valid_ip "${PIHOLE_DNS_2}" && [ "${PIHOLE_DNS_2}" ]; then
|
||||
if ! valid_ip "${PIHOLE_DNS_2}" && [[ "${PIHOLE_DNS_2}" ]]; then
|
||||
PIHOLE_DNS_2=${strInvalid}
|
||||
fi
|
||||
# If either of the DNS servers are invalid,
|
||||
if [[ ${PIHOLE_DNS_1} == "${strInvalid}" ]] || [[ ${PIHOLE_DNS_2} == "${strInvalid}" ]]; then
|
||||
if [[ "${PIHOLE_DNS_1}" == "${strInvalid}" ]] || [[ "${PIHOLE_DNS_2}" == "${strInvalid}" ]]; then
|
||||
# explain this to the user
|
||||
whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\n\n DNS Server 1: $PIHOLE_DNS_1\n DNS Server 2: ${PIHOLE_DNS_2}" ${r} ${c}
|
||||
whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\\n\\n DNS Server 1: $PIHOLE_DNS_1\\n DNS Server 2: ${PIHOLE_DNS_2}" ${r} ${c}
|
||||
# and set the variables back to nothing
|
||||
if [[ ${PIHOLE_DNS_1} == "${strInvalid}" ]]; then
|
||||
if [[ "${PIHOLE_DNS_1}" == "${strInvalid}" ]]; then
|
||||
PIHOLE_DNS_1=""
|
||||
fi
|
||||
if [[ ${PIHOLE_DNS_2} == "${strInvalid}" ]]; then
|
||||
if [[ "${PIHOLE_DNS_2}" == "${strInvalid}" ]]; then
|
||||
PIHOLE_DNS_2=""
|
||||
fi
|
||||
# Since the settings will not work, stay in the loop
|
||||
|
|
@ -856,7 +857,7 @@ setDNS() {
|
|||
# Othwerise,
|
||||
else
|
||||
# Show the settings
|
||||
if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\n DNS Server 1: $PIHOLE_DNS_1\n DNS Server 2: ${PIHOLE_DNS_2}" ${r} ${c}); then
|
||||
if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\\n DNS Server 1: $PIHOLE_DNS_1\\n DNS Server 2: ${PIHOLE_DNS_2}" ${r} ${c}); then
|
||||
# and break from the loop since the servers are vaid
|
||||
DNSSettingsCorrect=True
|
||||
# Otherwise,
|
||||
|
|
@ -878,7 +879,7 @@ setLogging() {
|
|||
local LogChoices
|
||||
|
||||
# Ask if the user wants to log queries
|
||||
LogToggleCommand=(whiptail --separate-output --radiolist "Do you want to log queries?\n (Disabling will render graphs on the Admin page useless):" ${r} ${c} 6)
|
||||
LogToggleCommand=(whiptail --separate-output --radiolist "Do you want to log queries?\\n (Disabling will render graphs on the Admin page useless):" ${r} ${c} 6)
|
||||
# The default selection is on
|
||||
LogChooseOptions=("On (Recommended)" "" on
|
||||
Off "" off)
|
||||
|
|
@ -916,12 +917,12 @@ setAdminFlag() {
|
|||
# Depending on their choice
|
||||
case ${WebChoices} in
|
||||
"On (Recommended)")
|
||||
echo -e " ${INFO} Web Interface On."
|
||||
echo -e " ${INFO} Web Interface On"
|
||||
# Set it to true
|
||||
INSTALL_WEB=true
|
||||
;;
|
||||
Off)
|
||||
echo -e " ${INFO} Web Interface off."
|
||||
echo -e " ${INFO} Web Interface Off"
|
||||
# or false
|
||||
INSTALL_WEB=false
|
||||
;;
|
||||
|
|
@ -939,7 +940,7 @@ version_check_dnsmasq() {
|
|||
local dnsmasq_pihole_01_location="/etc/dnsmasq.d/01-pihole.conf"
|
||||
|
||||
# If the dnsmasq config file exists
|
||||
if [ -f ${dnsmasq_conf} ]; then
|
||||
if [[ -f "${dnsmasq_conf}" ]]; then
|
||||
echo -ne " ${INFO} Existing dnsmasq.conf found..."
|
||||
# If gravity.list is found within this file, we presume it's from older versions on Pi-hole,
|
||||
if grep -q ${dnsmasq_pihole_id_string} ${dnsmasq_conf}; then
|
||||
|
|
@ -1048,8 +1049,8 @@ installScripts() {
|
|||
# Otherwise,
|
||||
else
|
||||
# Show an error and exit
|
||||
echo -e "${OVER} ${CROSS} ${str}"
|
||||
echo -e " ${COL_LIGHT_RED}Error: Local repo ${PI_HOLE_LOCAL_REPO} not found, exiting installer${COL_NC}"
|
||||
echo -e "${OVER} ${CROSS} ${str}
|
||||
${COL_LIGHT_RED}Error: Local repo ${PI_HOLE_LOCAL_REPO} not found, exiting installer${COL_NC}"
|
||||
exit 1
|
||||
fi
|
||||
}
|
||||
|
|
@ -1062,15 +1063,15 @@ installConfigs() {
|
|||
version_check_dnsmasq
|
||||
|
||||
# If the user chose to install the dashboard,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# and if the Web server conf directory does not exist,
|
||||
if [ ! -d "/etc/lighttpd" ]; then
|
||||
if [[ ! -d "/etc/lighttpd" ]]; then
|
||||
# make it
|
||||
mkdir /etc/lighttpd
|
||||
# and set the owners
|
||||
chown "${USER}":root /etc/lighttpd
|
||||
# Otherwise, if the config file already exists
|
||||
elif [ -f "/etc/lighttpd/lighttpd.conf" ]; then
|
||||
elif [[ -f "/etc/lighttpd/lighttpd.conf" ]]; then
|
||||
# back up the original
|
||||
mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
|
||||
fi
|
||||
|
|
@ -1164,16 +1165,13 @@ update_package_cache() {
|
|||
notify_package_updates_available() {
|
||||
# Local, named variables
|
||||
local str="Checking ${PKG_MANAGER} for upgraded packages"
|
||||
echo ""
|
||||
echo -ne " ${INFO} ${str}..."
|
||||
echo -ne "\\n ${INFO} ${str}..."
|
||||
# Store the list of packages in a variable
|
||||
updatesToInstall=$(eval "${PKG_COUNT}")
|
||||
#echo -e "\r\033[K ${TICK} ${str}"
|
||||
#echo ""
|
||||
#
|
||||
|
||||
if [[ -d "/lib/modules/$(uname -r)" ]]; then
|
||||
#
|
||||
if [[ ${updatesToInstall} -eq "0" ]]; then
|
||||
if [[ "${updatesToInstall}" -eq 0 ]]; then
|
||||
#
|
||||
echo -e "${OVER} ${TICK} ${str}... up to date!"
|
||||
echo ""
|
||||
|
|
@ -1184,10 +1182,8 @@ notify_package_updates_available() {
|
|||
echo ""
|
||||
fi
|
||||
else
|
||||
#
|
||||
echo -e "${OVER} ${CROSS} ${str}
|
||||
Kernel update detected. If the install fails, please reboot and try again"
|
||||
echo ""
|
||||
Kernel update detected. If the install fails, please reboot and try again\\n"
|
||||
fi
|
||||
}
|
||||
|
||||
|
|
@ -1199,7 +1195,7 @@ install_dependent_packages() {
|
|||
# Add one to the counter
|
||||
counter=$((counter+1))
|
||||
# If it equals 1,
|
||||
if [ ${counter} == 1 ]; then
|
||||
if [[ "${counter}" == 1 ]]; then
|
||||
#
|
||||
echo -e " ${INFO} Installer Dependency checks..."
|
||||
else
|
||||
|
|
@ -1233,7 +1229,7 @@ install_dependent_packages() {
|
|||
fi
|
||||
done
|
||||
#
|
||||
if [[ ${#installArray[@]} -gt 0 ]]; then
|
||||
if [[ "${#installArray[@]}" -gt 0 ]]; then
|
||||
#
|
||||
test_dpkg_lock
|
||||
#
|
||||
|
|
@ -1258,7 +1254,7 @@ install_dependent_packages() {
|
|||
fi
|
||||
done
|
||||
#
|
||||
if [[ ${#installArray[@]} -gt 0 ]]; then
|
||||
if [[ "${#installArray[@]}" -gt 0 ]]; then
|
||||
#
|
||||
"${PKG_INSTALL[@]}" "${installArray[@]}" &> /dev/null
|
||||
return
|
||||
|
|
@ -1273,7 +1269,7 @@ CreateLogFile() {
|
|||
echo ""
|
||||
echo -ne " ${INFO} ${str}..."
|
||||
# If the pihole log does not exist,
|
||||
if [ ! -f /var/log/pihole.log ]; then
|
||||
if [[ ! -f "/var/log/pihole.log" ]]; then
|
||||
# Make it,
|
||||
touch /var/log/pihole.log
|
||||
# set the permissions,
|
||||
|
|
@ -1293,11 +1289,11 @@ installPiholeWeb() {
|
|||
echo ""
|
||||
echo " ${INFO} Installing blocking page..."
|
||||
# If the pihole Web directory exists,
|
||||
if [ -d "/var/www/html/pihole" ]; then
|
||||
if [[ -d "/var/www/html/pihole" ]]; then
|
||||
local str="Installing index.php"
|
||||
echo -ne " ${INFO} ${str}..."
|
||||
# and if the index file exists,
|
||||
if [ -f "/var/www/html/pihole/index.php" ]; then
|
||||
if [[ -f "/var/www/html/pihole/index.php" ]]; then
|
||||
# do not overwrite it,
|
||||
echo -e " ${COL_LIGHT_GREEN}detected index.php, not overwriting${COL_NC}"
|
||||
# if it doesn't exist
|
||||
|
|
@ -1310,7 +1306,7 @@ installPiholeWeb() {
|
|||
local str="Installing index.js"
|
||||
echo -ne " ${INFO} ${str}..."
|
||||
# and if the index file exists,
|
||||
if [ -f "/var/www/html/pihole/index.js" ]; then
|
||||
if [[ -f "/var/www/html/pihole/index.js" ]]; then
|
||||
# do not overwrite it,
|
||||
echo -e " ${COL_LIGHT_GREEN}detected index.js, not overwriting${COL_NC}"
|
||||
else
|
||||
|
|
@ -1322,7 +1318,7 @@ installPiholeWeb() {
|
|||
local str="Installing blockingpage.css"
|
||||
echo -ne " ${INFO} ${str}..."
|
||||
# and if the index file exists,
|
||||
if [ -f "/var/www/html/pihole/blockingpage.css" ]; then
|
||||
if [[ -f "/var/www/html/pihole/blockingpage.css" ]]; then
|
||||
# do not overwrite it,
|
||||
echo -e " ${COL_LIGHT_GREEN}detected blockingpage.css, not overwriting${COL_NC}"
|
||||
else
|
||||
|
|
@ -1343,15 +1339,15 @@ installPiholeWeb() {
|
|||
local str="Backing up index.lighttpd.html"
|
||||
echo -ne " ${INFO} ${str}..."
|
||||
# If the default index file exists,
|
||||
if [ -f /var/www/html/index.lighttpd.html ]; then
|
||||
if [[ -f "/var/www/html/index.lighttpd.html" ]]; then
|
||||
# back it up
|
||||
mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
|
||||
echo -e "${OVER} ${TICK} ${str}"
|
||||
# Othwerwise,
|
||||
else
|
||||
# don't do anything
|
||||
echo -e "${OVER} ${CROSS} ${str}"
|
||||
echo -e " No default index.lighttpd.html file found... not backing up"
|
||||
echo -e "${OVER} ${CROSS} ${str}
|
||||
No default index.lighttpd.html file found... not backing up"
|
||||
fi
|
||||
|
||||
fi
|
||||
|
|
@ -1435,9 +1431,9 @@ configureFirewall() {
|
|||
# If a firewall is running,
|
||||
if firewall-cmd --state &> /dev/null; then
|
||||
# ask if the user wants to install Pi-hole's default firwall rules
|
||||
whiptail --title "Firewall in use" --yesno "We have detected a running firewall\n\nPi-hole currently requires HTTP and DNS port access.\n\n\n\nInstall Pi-hole default firewall rules?" ${r} ${c} || \
|
||||
whiptail --title "Firewall in use" --yesno "We have detected a running firewall\\n\\nPi-hole currently requires HTTP and DNS port access.\\n\\n\\n\\nInstall Pi-hole default firewall rules?" ${r} ${c} || \
|
||||
{ echo -e " ${INFO} Not installing firewall rulesets."; return 0; }
|
||||
echo -e " ${TICK} Configuring FirewallD for httpd and dnsmasq."
|
||||
echo -e " ${TICK} Configuring FirewallD for httpd and dnsmasq"
|
||||
# Allow HTTP and DNS traffice
|
||||
firewall-cmd --permanent --add-service=http --add-service=dns
|
||||
# Reload the firewall to apply these changes
|
||||
|
|
@ -1448,9 +1444,9 @@ configureFirewall() {
|
|||
# If chain Policy is not ACCEPT or last Rule is not ACCEPT
|
||||
# then check and insert our Rules above the DROP/REJECT Rule.
|
||||
if iptables -S INPUT | head -n1 | grep -qv '^-P.*ACCEPT$' || iptables -S INPUT | tail -n1 | grep -qv '^-\(A\|P\).*ACCEPT$'; then
|
||||
whiptail --title "Firewall in use" --yesno "We have detected a running firewall\n\nPi-hole currently requires HTTP and DNS port access.\n\n\n\nInstall Pi-hole default firewall rules?" ${r} ${c} || \
|
||||
whiptail --title "Firewall in use" --yesno "We have detected a running firewall\\n\\nPi-hole currently requires HTTP and DNS port access.\\n\\n\\n\\nInstall Pi-hole default firewall rules?" ${r} ${c} || \
|
||||
{ echo -e " ${INFO} Not installing firewall rulesets."; return 0; }
|
||||
echo -e " ${TICK} Installing new IPTables firewall rulesets."
|
||||
echo -e " ${TICK} Installing new IPTables firewall rulesets"
|
||||
# Check chain first, otherwise a new rule will duplicate old ones
|
||||
iptables -C INPUT -p tcp -m tcp --dport 80 -j ACCEPT &> /dev/null || iptables -I INPUT 1 -p tcp -m tcp --dport 80 -j ACCEPT
|
||||
iptables -C INPUT -p tcp -m tcp --dport 53 -j ACCEPT &> /dev/null || iptables -I INPUT 1 -p tcp -m tcp --dport 53 -j ACCEPT
|
||||
|
|
@ -1461,31 +1457,32 @@ configureFirewall() {
|
|||
# Othwerwise,
|
||||
else
|
||||
# no firewall is running
|
||||
echo -e " ${INFO} No active firewall detected.. skipping firewall configuration."
|
||||
echo -e " ${INFO} No active firewall detected.. skipping firewall configuration"
|
||||
# so just exit
|
||||
return 0
|
||||
fi
|
||||
echo -e " ${INFO} Skipping firewall configuration."
|
||||
echo -e " ${INFO} Skipping firewall configuration"
|
||||
}
|
||||
|
||||
#
|
||||
finalExports() {
|
||||
# If the Web interface is not set to be installed,
|
||||
if [[ ${INSTALL_WEB} == false ]]; then
|
||||
if [[ "${INSTALL_WEB}" == false ]]; then
|
||||
# and if there is not an IPv4 address,
|
||||
if [ ${IPV4_ADDRESS} ]; then
|
||||
if [[ "${IPV4_ADDRESS}" ]]; then
|
||||
# there is no block page, so set IPv4 to 0.0.0.0 (all IP addresses)
|
||||
IPV4_ADDRESS="0.0.0.0"
|
||||
fi
|
||||
if [ ${IPV6_ADDRESS} ]; then
|
||||
if [[ "${IPV6_ADDRESS}" ]]; then
|
||||
# and IPv6 to ::/0
|
||||
IPV6_ADDRESS="::/0"
|
||||
fi
|
||||
fi
|
||||
|
||||
# If the setup variable file exists,
|
||||
if [ -e "${setupVars}" ]; then
|
||||
sed -i.update.bak '/PIHOLE_INTERFACE/d;/IPV4_ADDRESS/d;/IPV6_ADDRESS/d;/PIHOLE_DNS_1/d;/PIHOLE_DNS_2/d;/QUERY_LOGGING/d;/INSTALL_WEB/d;/LIGHTTPD_ENABLED/d;' "${setupVars}"
|
||||
if [[ -e "${setupVars}" ]]; then
|
||||
# update the variables in the file
|
||||
sed -i.update.bak '/PIHOLE_INTERFACE/d;/IPV4_ADDRESS/d;/IPV6_ADDRESS/d;/PIHOLE_DNS_1/d;/PIHOLE_DNS_2/d;/QUERY_LOGGING/d;/INSTALL_WEB/d;' "${setupVars}"
|
||||
fi
|
||||
# echo the information to the user
|
||||
{
|
||||
|
|
@ -1526,7 +1523,7 @@ installLogrotate() {
|
|||
# the local properties of the /var/log directory
|
||||
logusergroup="$(stat -c '%U %G' /var/log)"
|
||||
# If the variable has a value,
|
||||
if [[ ! -z $logusergroup ]]; then
|
||||
if [[ ! -z "${logusergroup}" ]]; then
|
||||
#
|
||||
sed -i "s/# su #/su ${logusergroup}/g;" /etc/pihole/logrotate
|
||||
fi
|
||||
|
|
@ -1539,8 +1536,8 @@ installPihole() {
|
|||
create_pihole_user
|
||||
|
||||
# If the user wants to install the Web interface,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [ ! -d "/var/www/html" ]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
if [[ ! -d "/var/www/html" ]]; then
|
||||
# make the Web directory if necessary
|
||||
mkdir -p /var/www/html
|
||||
fi
|
||||
|
|
@ -1550,13 +1547,13 @@ installPihole() {
|
|||
# Give pihole access to the Web server group
|
||||
usermod -a -G ${LIGHTTPD_GROUP} pihole
|
||||
# If the lighttpd command is executable,
|
||||
if [ -x "$(command -v lighty-enable-mod)" ]; then
|
||||
if [[ -x "$(command -v lighty-enable-mod)" ]]; then
|
||||
# enable fastcgi and fastcgi-php
|
||||
lighty-enable-mod fastcgi fastcgi-php > /dev/null || true
|
||||
else
|
||||
# Othweise, show info about installing them
|
||||
echo -e " ${INFO} Warning: 'lighty-enable-mod' utility not found
|
||||
Please ensure fastcgi is enabled if you experience issues\n"
|
||||
Please ensure fastcgi is enabled if you experience issues\\n"
|
||||
fi
|
||||
fi
|
||||
# Install scripts,
|
||||
|
|
@ -1566,7 +1563,7 @@ installPihole() {
|
|||
# and create the log file
|
||||
CreateLogFile
|
||||
# If the user wants to install the dashboard,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# do so
|
||||
installPiholeWeb
|
||||
fi
|
||||
|
|
@ -1575,7 +1572,7 @@ installPihole() {
|
|||
# Install the logrotate file
|
||||
installLogrotate
|
||||
# Check if FTL is installed
|
||||
FTLdetect || echo -e " ${CROSS} FTL Engine not installed."
|
||||
FTLdetect || echo -e " ${CROSS} FTL Engine not installed"
|
||||
# Configure the firewall
|
||||
configureFirewall
|
||||
|
||||
|
|
@ -1604,7 +1601,7 @@ updatePihole() {
|
|||
# Create the log file
|
||||
CreateLogFile
|
||||
# If the user wants to install the dasboard,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# do so
|
||||
installPiholeWeb
|
||||
fi
|
||||
|
|
@ -1625,19 +1622,17 @@ updatePihole() {
|
|||
checkSelinux() {
|
||||
# If the getenforce command exists,
|
||||
if command -v getenforce &> /dev/null; then
|
||||
echo ""
|
||||
echo -ne " ${INFO} SELinux Support Detected... Mode: "
|
||||
# Store the current mode in a variable
|
||||
enforceMode=$(getenforce)
|
||||
echo "${enforceMode}"
|
||||
echo -e "\\n ${INFO} SELinux mode detected: ${enforceMode}"
|
||||
|
||||
# If it's enforcing,
|
||||
if [[ "${enforceMode}" == "Enforcing" ]]; then
|
||||
# Explain Pi-hole does not support it yet
|
||||
whiptail --title "SELinux Enforcing Detected" --yesno "SELinux is being Enforced on your system!\n\nPi-hole currently does not support SELinux, but you may still continue with the installation.\n\nNote: Admin UI Will not function fully without setting your policies correctly\n\nContinue installing Pi-hole?" ${r} ${c} || \
|
||||
{ echo ""; echo -e " ${COL_LIGHT_RED}SELinux Enforcing detected, exiting installer${COL_NC}"; exit 1; }
|
||||
echo ""
|
||||
echo -e " ${INFO} Continuing installation with SELinux Enforcing"
|
||||
echo -e " ${INFO} Please refer to official SELinux documentation to create a custom policy"
|
||||
whiptail --defaultno --title "SELinux Enforcing Detected" --yesno "SELinux is being ENFORCED on your system! \\n\\nPi-hole currently does not support SELinux, but you may still continue with the installation.\\n\\nNote: Web Admin will not be fully functional unless you set your policies correctly\\n\\nContinue installing Pi-hole?" ${r} ${c} || \
|
||||
{ echo -e "\\n ${COL_LIGHT_RED}SELinux Enforcing detected, exiting installer${COL_NC}"; exit 1; }
|
||||
echo -e " ${INFO} Continuing installation with SELinux Enforcing
|
||||
${INFO} Please refer to official SELinux documentation to create a custom policy"
|
||||
fi
|
||||
fi
|
||||
}
|
||||
|
|
@ -1645,7 +1640,7 @@ checkSelinux() {
|
|||
# Installation complete message with instructions for the user
|
||||
displayFinalMessage() {
|
||||
# If
|
||||
if [[ ${#1} -gt 0 ]] ; then
|
||||
if [[ "${#1}" -gt 0 ]] ; then
|
||||
pwstring="$1"
|
||||
# else, if the dashboard password in the setup variables exists,
|
||||
elif [[ $(grep 'WEBPASSWORD' -c /etc/pihole/setupVars.conf) -gt 0 ]]; then
|
||||
|
|
@ -1656,7 +1651,7 @@ displayFinalMessage() {
|
|||
pwstring="NOT SET"
|
||||
fi
|
||||
# If the user wants to install the dashboard,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# Store a message in a variable and display it
|
||||
additional="View the web interface at http://pi.hole/admin or http://${IPV4_ADDRESS%/*}/admin
|
||||
|
||||
|
|
@ -1678,7 +1673,7 @@ ${additional}" ${r} ${c}
|
|||
|
||||
update_dialogs() {
|
||||
# If pihole -r "reconfigure" option was selected,
|
||||
if [ "${reconfigure}" = true ]; then
|
||||
if [[ "${reconfigure}" = true ]]; then
|
||||
# set some variables that will be used
|
||||
opt1a="Repair"
|
||||
opt1b="This will retain existing settings"
|
||||
|
|
@ -1694,7 +1689,7 @@ update_dialogs() {
|
|||
opt2b="This will allow you to enter new settings"
|
||||
|
||||
# Display the information to the user
|
||||
UpdateCmd=$(whiptail --title "Existing Install Detected!" --menu "\n\nWe have detected an existing install.\n\nPlease choose from the following options: \n($strAdd)" ${r} ${c} 2 \
|
||||
UpdateCmd=$(whiptail --title "Existing Install Detected!" --menu "\\n\\nWe have detected an existing install.\\n\\nPlease choose from the following options: \\n($strAdd)" ${r} ${c} 2 \
|
||||
"${opt1a}" "${opt1b}" \
|
||||
"${opt2a}" "${opt2b}" 3>&2 2>&1 1>&3) || \
|
||||
{ echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
|
||||
|
|
@ -1703,7 +1698,7 @@ update_dialogs() {
|
|||
case ${UpdateCmd} in
|
||||
# repair, or
|
||||
${opt1a})
|
||||
echo -e " ${INFO} ${opt1a} option selected."
|
||||
echo -e " ${INFO} ${opt1a} option selected"
|
||||
useUpdateVars=true
|
||||
;;
|
||||
# recongigure,
|
||||
|
|
@ -1714,7 +1709,6 @@ update_dialogs() {
|
|||
esac
|
||||
}
|
||||
|
||||
|
||||
clone_or_update_repos() {
|
||||
# If the user wants to reconfigure,
|
||||
if [[ "${reconfigure}" == true ]]; then
|
||||
|
|
@ -1725,7 +1719,7 @@ clone_or_update_repos() {
|
|||
exit 1; \
|
||||
}
|
||||
# If the Web interface was installed,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# reset it's repo
|
||||
resetRepo ${webInterfaceDir} || \
|
||||
{ echo -e " ${COL_LIGHT_RED}Unable to reset ${webInterfaceDir}, exiting installer${COL_NC}"; \
|
||||
|
|
@ -1736,11 +1730,11 @@ clone_or_update_repos() {
|
|||
else
|
||||
# so get git files for Core
|
||||
getGitFiles ${PI_HOLE_LOCAL_REPO} ${piholeGitUrl} || \
|
||||
{ echo "!!! Unable to clone ${piholeGitUrl} into ${PI_HOLE_LOCAL_REPO}, unable to continue."; \
|
||||
{ echo -e " ${COL_LIGHT_RED}Unable to clone ${piholeGitUrl} into ${PI_HOLE_LOCAL_REPO}, unable to continue${COL_NC}"; \
|
||||
exit 1; \
|
||||
}
|
||||
# If the Web interface was installed,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# get the Web git files
|
||||
getGitFiles ${webInterfaceDir} ${webInterfaceGitUrl} || \
|
||||
{ echo -e " ${COL_LIGHT_RED}Unable to clone ${webInterfaceGitUrl} into ${webInterfaceDir}, exiting installer${COL_NC}"; \
|
||||
|
|
@ -1824,21 +1818,23 @@ FTLdetect() {
|
|||
local str="Detecting architecture"
|
||||
echo -ne " ${INFO} ${str}..."
|
||||
# If the machine is arm or aarch
|
||||
if [[ ${machine} == arm* || ${machine} == *aarch* ]]; then
|
||||
if [[ "${machine}" == "arm"* || "${machine}" == *"aarch"* ]]; then
|
||||
# ARM
|
||||
#
|
||||
local rev=$(uname -m | sed "s/[^0-9]//g;")
|
||||
local rev
|
||||
rev=$(uname -m | sed "s/[^0-9]//g;")
|
||||
#
|
||||
local lib=$(ldd /bin/ls | grep -E '^\s*/lib' | awk '{ print $1 }')
|
||||
local lib
|
||||
lib=$(ldd /bin/ls | grep -E '^\s*/lib' | awk '{ print $1 }')
|
||||
#
|
||||
if [[ "$lib" == "/lib/ld-linux-aarch64.so.1" ]]; then
|
||||
if [[ "${lib}" == "/lib/ld-linux-aarch64.so.1" ]]; then
|
||||
echo -e "${OVER} ${TICK} Detected ARM-aarch64 architecture"
|
||||
# set the binary to be used
|
||||
binary="pihole-FTL-aarch64-linux-gnu"
|
||||
#
|
||||
elif [[ "$lib" == "/lib/ld-linux-armhf.so.3" ]]; then
|
||||
elif [[ "${lib}" == "/lib/ld-linux-armhf.so.3" ]]; then
|
||||
#
|
||||
if [ "$rev" -gt "6" ]; then
|
||||
if [[ "${rev}" -gt 6 ]]; then
|
||||
echo -e "${OVER} ${TICK} Detected ARM-hf architecture (armv7+)"
|
||||
# set the binary to be used
|
||||
binary="pihole-FTL-arm-linux-gnueabihf"
|
||||
|
|
@ -1853,22 +1849,22 @@ FTLdetect() {
|
|||
# set the binary to be used
|
||||
binary="pihole-FTL-arm-linux-gnueabi"
|
||||
fi
|
||||
elif [[ $machine == ppc ]]; then
|
||||
elif [[ "${machine}" == "ppc" ]]; then
|
||||
# PowerPC
|
||||
echo "::: Detected PowerPC architecture"
|
||||
echo -e "${OVER} ${TICK} Detected PowerPC architecture"
|
||||
# set the binary to be used
|
||||
binary="pihole-FTL-powerpc-linux-gnu"
|
||||
elif [[ ${machine} == x86_64 ]]; then
|
||||
elif [[ "${machine}" == "x86_64" ]]; then
|
||||
# 64bit
|
||||
echo -e "${OVER} ${TICK} Detected x86_64 architecture"
|
||||
# set the binary to be used
|
||||
binary="pihole-FTL-linux-x86_64"
|
||||
else
|
||||
# Something else - we try to use 32bit executable and warn the user
|
||||
if [[ ! ${machine} == i686 ]]; then
|
||||
if [[ ! "${machine}" == "i686" ]]; then
|
||||
echo -e "${OVER} ${CROSS} ${str}...
|
||||
${COL_LIGHT_RED}Not able to detect architecture (unknown: ${machine}), trying 32bit executable
|
||||
Contact support if you experience issues (e.g: FTL not running)${COL_NC}"
|
||||
${COL_LIGHT_RED}Not able to detect architecture (unknown: ${machine}), trying 32bit executable${COL_NC}
|
||||
Contact Pi-hole Support if you experience issues (e.g: FTL not running)"
|
||||
else
|
||||
echo -e "${OVER} ${TICK} Detected 32bit (i686) architecture"
|
||||
fi
|
||||
|
|
@ -1910,7 +1906,6 @@ FTLdetect() {
|
|||
}
|
||||
|
||||
main() {
|
||||
|
||||
######## FIRST CHECK ########
|
||||
# Show the Pi-hole logo so people know it's genuine since the logo and name are trademarked
|
||||
show_ascii_berry
|
||||
|
|
@ -1919,18 +1914,17 @@ main() {
|
|||
echo ""
|
||||
|
||||
# If the user's id is zero,
|
||||
if [[ ${EUID} -eq 0 ]]; then
|
||||
if [[ "${EUID}" -eq 0 ]]; then
|
||||
# they are root and all is good
|
||||
echo -e " ${TICK} ${str}"
|
||||
# Otherwise,
|
||||
else
|
||||
# They do not have enough privileges, so let the user know
|
||||
echo -e " ${CROSS} ${str}
|
||||
Script called with non-root privileges
|
||||
The Pi-hole requires elevated privleges to install and run
|
||||
Please check the installer for any concerns regarding this requirement
|
||||
Make sure to download this script from a trusted source"
|
||||
echo ""
|
||||
${COL_LIGHT_RED}Script called with non-root privileges${COL_NC}
|
||||
The Pi-hole requires elevated privleges to install and run
|
||||
Please check the installer for any concerns regarding this requirement
|
||||
Make sure to download this script from a trusted source\\n"
|
||||
echo -ne " ${INFO} Sudo utility check"
|
||||
|
||||
# If the sudo command exists,
|
||||
|
|
@ -1943,7 +1937,7 @@ main() {
|
|||
else
|
||||
# Let them know they need to run it as root
|
||||
echo -e "${OVER} ${CROSS} Sudo utility check
|
||||
Sudo is needed for the Web Interface to run pihole commands\n
|
||||
Sudo is needed for the Web Interface to run pihole commands\\n
|
||||
${COL_LIGHT_RED}Please re-run this installer as root${COL_NC}"
|
||||
exit 1
|
||||
fi
|
||||
|
|
@ -1962,7 +1956,7 @@ main() {
|
|||
done
|
||||
|
||||
# If the setup variable file exists,
|
||||
if [[ -f ${setupVars} ]]; then
|
||||
if [[ -f "${setupVars}" ]]; then
|
||||
# if it's running unattended,
|
||||
if [[ "${runUnattended}" == true ]]; then
|
||||
echo -e " ${INFO} Performing unattended setup, no whiptail dialogs will be displayed"
|
||||
|
|
@ -1995,15 +1989,14 @@ main() {
|
|||
# Check if SELinux is Enforcing
|
||||
checkSelinux
|
||||
|
||||
|
||||
if [[ ${useUpdateVars} == false ]]; then
|
||||
if [[ "${useUpdateVars}" == false ]]; then
|
||||
# Display welcome dialogs
|
||||
welcomeDialogs
|
||||
# Create directory for Pi-hole storage
|
||||
mkdir -p /etc/pihole/
|
||||
|
||||
stop_service dnsmasq
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
stop_service lighttpd
|
||||
fi
|
||||
# Determine available interfaces
|
||||
|
|
@ -2022,7 +2015,7 @@ main() {
|
|||
clone_or_update_repos
|
||||
|
||||
# Install packages used by the Pi-hole
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# Install the Web dependencies
|
||||
DEPS=("${PIHOLE_DEPS[@]}" "${PIHOLE_WEB_DEPS[@]}")
|
||||
# Otherwise,
|
||||
|
|
@ -2046,11 +2039,11 @@ main() {
|
|||
# Clone/Update the repos
|
||||
clone_or_update_repos
|
||||
|
||||
# Source ${setupVars} for use in the rest of the functions.
|
||||
# Source ${setupVars} for use in the rest of the functions
|
||||
source ${setupVars}
|
||||
|
||||
# Install packages used by the Pi-hole
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# Install the Web dependencies
|
||||
DEPS=("${PIHOLE_DEPS[@]}" "${PIHOLE_WEB_DEPS[@]}")
|
||||
# Otherwise,
|
||||
|
|
@ -2074,13 +2067,14 @@ main() {
|
|||
# Move the log file into /etc/pihole for storage
|
||||
mv ${tmpLog} ${instalLogLoc}
|
||||
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# Add password to web UI if there is none
|
||||
pw=""
|
||||
# If no password is set,
|
||||
if [[ $(grep 'WEBPASSWORD' -c /etc/pihole/setupVars.conf) == 0 ]] ; then
|
||||
# generate a random password
|
||||
pw=$(tr -dc _A-Z-a-z-0-9 < /dev/urandom | head -c 8)
|
||||
# shellcheck disable=SC1091
|
||||
. /opt/pihole/webpage.sh
|
||||
echo "WEBPASSWORD=$(HashPassword ${pw})" >> ${setupVars}
|
||||
fi
|
||||
|
|
@ -2115,20 +2109,19 @@ main() {
|
|||
fi
|
||||
|
||||
# If the Web interface was installed,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
# If there is a password,
|
||||
if (( ${#pw} > 0 )) ; then
|
||||
# display the password
|
||||
echo -e " ${INFO} Web Interface password: ${COL_LIGHT_GREEN}${pw}${COL_NC}
|
||||
This can be changed using 'pihole -a -p'"
|
||||
echo ""
|
||||
This can be changed using 'pihole -a -p'\\n"
|
||||
fi
|
||||
fi
|
||||
|
||||
#
|
||||
if [[ "${useUpdateVars}" == false ]]; then
|
||||
# If the Web interface was installed,
|
||||
if [[ ${INSTALL_WEB} == true ]]; then
|
||||
if [[ "${INSTALL_WEB}" == true ]]; then
|
||||
echo -e " View the web interface at http://pi.hole/admin or http://${IPV4_ADDRESS%/*}/admin"
|
||||
echo ""
|
||||
fi
|
||||
|
|
@ -2145,7 +2138,7 @@ main() {
|
|||
fi
|
||||
|
||||
# Display where the log file is
|
||||
echo -e "\n ${INFO} The install log is located at: /etc/pihole/install.log
|
||||
echo -e "\\n ${INFO} The install log is located at: /etc/pihole/install.log
|
||||
${COL_LIGHT_GREEN}${INSTALL_TYPE} Complete! ${COL_NC}"
|
||||
|
||||
}
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ def test_configureFirewall_firewalld_running_no_errors(Pihole):
|
|||
source /opt/pihole/basic-install.sh
|
||||
configureFirewall
|
||||
''')
|
||||
expected_stdout = 'Configuring FirewallD for httpd and dnsmasq.'
|
||||
expected_stdout = 'Configuring FirewallD for httpd and dnsmasq'
|
||||
assert expected_stdout in configureFirewall.stdout
|
||||
firewall_calls = Pihole.run('cat /var/log/firewall-cmd').stdout
|
||||
assert 'firewall-cmd --state' in firewall_calls
|
||||
|
|
@ -95,7 +95,7 @@ def test_configureFirewall_firewalld_disabled_no_errors(Pihole):
|
|||
source /opt/pihole/basic-install.sh
|
||||
configureFirewall
|
||||
''')
|
||||
expected_stdout = 'No active firewall detected.. skipping firewall configuration.'
|
||||
expected_stdout = 'No active firewall detected.. skipping firewall configuration'
|
||||
assert expected_stdout in configureFirewall.stdout
|
||||
|
||||
def test_configureFirewall_firewalld_enabled_declined_no_errors(Pihole):
|
||||
|
|
@ -444,7 +444,7 @@ def test_IPv6_only_link_local(Pihole):
|
|||
source /opt/pihole/basic-install.sh
|
||||
useIPv6dialog
|
||||
''')
|
||||
expected_stdout = 'Found neither IPv6 ULA nor GUA address, blocking IPv6 ads will not be enabled'
|
||||
expected_stdout = 'Unable to find IPv6 ULA/GUA address, IPv6 adblocking will not be enabled'
|
||||
assert expected_stdout in detectPlatform.stdout
|
||||
|
||||
def test_IPv6_only_ULA(Pihole):
|
||||
|
|
|
|||
Loading…
Reference in a new issue