#!/usr/bin/env bash # shellcheck disable=SC1090 # Pi-hole: A black hole for Internet advertisements # (c) Pi-hole (https://pi-hole.net) # Network-wide ad blocking via your own hardware. # # Installs and Updates Pi-hole # # This file is copyright under the latest version of the EUPL. # Please see LICENSE file for your rights under this license. # pi-hole.net/donate # # Install with this command (from your Linux machine): # # curl -sSL https://install.pi-hole.net | bash # -e option instructs bash to immediately exit if any command [1] has a non-zero exit status # We do not want users to end up with a partially working install, so we exit the script # instead of continuing the installation with something broken set -e # Append common folders to the PATH to ensure that all basic commands are available. # When using "su" an incomplete PATH could be passed: https://github.com/pi-hole/pi-hole/issues/3209 export PATH+=':/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin' ######## VARIABLES ######### # For better maintainability, we store as much information that can change in variables # This allows us to make a change in one place that can propagate to all instances of the variable # These variables should all be GLOBAL variables, written in CAPS # Local variables will be in lowercase and will exist only within functions # It's still a work in progress, so you may see some variance in this guideline until it is complete # Dialog result codes # dialog code values can be set by environment variables, we only override if # the env var is not set or empty. : "${DIALOG_OK:=0}" : "${DIALOG_CANCEL:=1}" : "${DIALOG_ESC:=255}" # List of supported DNS servers DNS_SERVERS=$( cat </dev/null 2>&1 } os_check_dig(){ local protocol="$1" local domain="$2" local nameserver="$3" local response response="$(dig -"${protocol}" +short -t txt "${domain}" "${nameserver}" 2>&1 echo $? )" echo "${response}" } os_check_dig_response(){ # Checks the reply from the dig command to determine if it's a valid response local digReply="$1" local response # Dig returned 0 (success), so get the actual response, and loop through it to determine if the detected variables above are valid response="${digReply%%$'\n'*}" # If the value of ${response} is a single 0, then this is the return code, not an actual response. if [ "${response}" == 0 ]; then echo false else echo true fi } os_check() { if [ "$PIHOLE_SKIP_OS_CHECK" != true ]; then # This function gets a list of supported OS versions from a TXT record at versions.pi-hole.net # and determines whether or not the script is running on one of those systems local remote_os_domain valid_os valid_version valid_response detected_os detected_version display_warning cmdResult digReturnCode response local piholeNameserver="@ns1.pi-hole.net" remote_os_domain=${OS_CHECK_DOMAIN_NAME:-"versions.pi-hole.net"} detected_os=$(grep '^ID=' /etc/os-release | cut -d '=' -f2 | tr -d '"') detected_version=$(grep VERSION_ID /etc/os-release | cut -d '=' -f2 | tr -d '"') # Test via IPv4 and hardcoded nameserver ns1.pi-hole.net cmdResult=$(os_check_dig 4 "${remote_os_domain}" "${piholeNameserver}") # Gets the return code of the previous command (last line) digReturnCode="${cmdResult##*$'\n'}" if [ ! "${digReturnCode}" == "0" ]; then valid_response=false else valid_response=$(os_check_dig_response cmdResult) fi # Try again via IPv6 and hardcoded nameserver ns1.pi-hole.net if [ "$valid_response" = false ]; then unset valid_response unset cmdResult unset digReturnCode cmdResult=$(os_check_dig 6 "${remote_os_domain}" "${piholeNameserver}") # Gets the return code of the previous command (last line) digReturnCode="${cmdResult##*$'\n'}" if [ ! "${digReturnCode}" == "0" ]; then valid_response=false else valid_response=$(os_check_dig_response cmdResult) fi fi # Try again without hardcoded nameserver if [ "$valid_response" = false ]; then unset valid_response unset cmdResult unset digReturnCode cmdResult=$(os_check_dig 4 "${remote_os_domain}") # Gets the return code of the previous command (last line) digReturnCode="${cmdResult##*$'\n'}" if [ ! "${digReturnCode}" == "0" ]; then valid_response=false else valid_response=$(os_check_dig_response cmdResult) fi fi if [ "$valid_response" = false ]; then unset valid_response unset cmdResult unset digReturnCode cmdResult=$(os_check_dig 6 "${remote_os_domain}") # Gets the return code of the previous command (last line) digReturnCode="${cmdResult##*$'\n'}" if [ ! "${digReturnCode}" == "0" ]; then valid_response=false else valid_response=$(os_check_dig_response cmdResult) fi fi if [ "$valid_response" = true ]; then response="${cmdResult%%$'\n'*}" IFS=" " read -r -a supportedOS < <(echo "${response}" | tr -d '"') for distro_and_versions in "${supportedOS[@]}"; do distro_part="${distro_and_versions%%=*}" versions_part="${distro_and_versions##*=}" # If the distro part is a (case-insensitive) substring of the computer OS if [[ "${detected_os^^}" =~ ${distro_part^^} ]]; then valid_os=true IFS="," read -r -a supportedVer <<<"${versions_part}" for version in "${supportedVer[@]}"; do if [[ "${detected_version}" =~ $version ]]; then valid_version=true break fi done break fi done fi if [ "$valid_os" = true ] && [ "$valid_version" = true ] && [ "$valid_response" = true ]; then display_warning=false fi if [ "$display_warning" != false ]; then if [ "$valid_response" = false ]; then if [ "${digReturnCode}" -eq 0 ]; then errStr="dig succeeded, but response was blank. Please contact support" else errStr="dig failed with return code ${digReturnCode}" fi printf " %b %bRetrieval of supported OS list failed. %s. %b\\n" "${CROSS}" "${COL_LIGHT_RED}" "${errStr}" "${COL_NC}" printf " %bUnable to determine if the detected OS (%s %s) is supported%b\\n" "${COL_LIGHT_RED}" "${detected_os^}" "${detected_version}" "${COL_NC}" printf " Possible causes for this include:\\n" printf " - Firewall blocking DNS lookups from Pi-hole device to ns1.pi-hole.net\\n" printf " - DNS resolution issues of the host system\\n" printf " - Other internet connectivity issues\\n" else printf " %b %bUnsupported OS detected: %s %s%b\\n" "${CROSS}" "${COL_LIGHT_RED}" "${detected_os^}" "${detected_version}" "${COL_NC}" printf " If you are seeing this message and you do have a supported OS, please contact support.\\n" fi printf "\\n" printf " %bhttps://docs.pi-hole.net/main/prerequisites/#supported-operating-systems%b\\n" "${COL_LIGHT_GREEN}" "${COL_NC}" printf "\\n" printf " If you wish to attempt to continue anyway, you can try one of the following commands to skip this check:\\n" printf "\\n" printf " e.g: If you are seeing this message on a fresh install, you can run:\\n" printf " %bcurl -sSL https://install.pi-hole.net | sudo PIHOLE_SKIP_OS_CHECK=true bash%b\\n" "${COL_LIGHT_GREEN}" "${COL_NC}" printf "\\n" printf " If you are seeing this message after having run pihole -up:\\n" printf " %bsudo PIHOLE_SKIP_OS_CHECK=true pihole -r%b\\n" "${COL_LIGHT_GREEN}" "${COL_NC}" printf " (In this case, your previous run of pihole -up will have already updated the local repository)\\n" printf "\\n" printf " It is possible that the installation will still fail at this stage due to an unsupported configuration.\\n" printf " If that is the case, you can feel free to ask the community on Discourse with the %bCommunity Help%b category:\\n" "${COL_LIGHT_RED}" "${COL_NC}" printf " %bhttps://discourse.pi-hole.net/c/bugs-problems-issues/community-help/%b\\n" "${COL_LIGHT_GREEN}" "${COL_NC}" printf "\\n" exit 1 else printf " %b %bSupported OS detected%b\\n" "${TICK}" "${COL_LIGHT_GREEN}" "${COL_NC}" fi else printf " %b %bPIHOLE_SKIP_OS_CHECK env variable set to true - installer will continue%b\\n" "${INFO}" "${COL_LIGHT_GREEN}" "${COL_NC}" fi } # This function waits for dpkg to unlock, which signals that the previous apt-get command has finished. test_dpkg_lock() { i=0 printf " %b Waiting for package manager to finish (up to 30 seconds)\\n" "${INFO}" # fuser is a program to show which processes use the named files, sockets, or filesystems # So while the lock is held, while fuser /var/lib/dpkg/lock >/dev/null 2>&1; do # we wait half a second, sleep 0.5 # increase the iterator, ((i = i + 1)) # exit if waiting for more then 30 seconds if [[ $i -gt 60 ]]; then printf " %b %bError: Could not verify package manager finished and released lock. %b\\n" "${CROSS}" "${COL_LIGHT_RED}" "${COL_NC}" printf " Attempt to install packages manually and retry.\\n" exit 1 fi done # and then report success once dpkg is unlocked. return 0 } # Compatibility package_manager_detect() { # pull common packages for both distributions out into a common variable OS_CHECK_COMMON_DEPS=(grep) PIHOLE_COMMON_DEPS=(curl psmisc sudo unzip jq); INSTALLER_COMMON_DEPS=(git dialog ca-certificates) # First check to see if apt-get is installed. if is_command apt-get; then # Set some global variables here # We don't set them earlier since the installed package manager might be rpm, so these values would be different PKG_MANAGER="apt-get" # A variable to store the command used to update the package cache UPDATE_PKG_CACHE="${PKG_MANAGER} update" # The command we will use to actually install packages PKG_INSTALL=("${PKG_MANAGER}" -qq --no-install-recommends install) # grep -c will return 1 if there are no matches. This is an acceptable condition, so we OR TRUE to prevent set -e exiting the script. PKG_COUNT="${PKG_MANAGER} -s -o Debug::NoLocking=true upgrade | grep -c ^Inst || true" # Update package cache update_package_cache || exit 1 # Packages required to perform the os_check and FTL binary detection OS_CHECK_DEPS=(dnsutils binutils) # Packages required to run this install script INSTALLER_DEPS=(iproute2) # Packages required to run Pi-hole PIHOLE_DEPS=(cron iputils-ping libcap2-bin dns-root-data libcap2 netcat-openbsd procps lshw bash-completion) # If apt-get is not found, check for rpm. elif is_command rpm; then # Then check if dnf or yum is the package manager if is_command dnf; then PKG_MANAGER="dnf" else PKG_MANAGER="yum" fi # These variable names match the ones for apt-get. See above for an explanation of what they are for. PKG_INSTALL=("${PKG_MANAGER}" install -y) # CentOS package manager returns 100 when there are packages to update so we need to || true to prevent the script from exiting. PKG_COUNT="${PKG_MANAGER} check-update | grep -E '(.i686|.x86|.noarch|.arm|.src|.riscv64)' | wc -l || true" OS_CHECK_DEPS=(bind-utils) INSTALLER_DEPS=(iproute newt procps-ng chkconfig binutils) PIHOLE_DEPS=(cronie findutils libcap nmap-ncat lshw bash-completion) # If neither apt-get or yum/dnf package managers were found else # we cannot install required packages printf " %b No supported package manager found\\n" "${CROSS}" # so exit the installer exit fi } # A function for checking if a directory is a git repository is_repo() { # Use a named, local variable instead of the vague $1, which is the first argument passed to this function # These local variables should always be lowercase local directory="${1}" # A variable to store the return code local rc # If the first argument passed to this function is a directory, if [[ -d "${directory}" ]]; then # move into the directory pushd "${directory}" &>/dev/null || return 1 # Use git to check if the directory is a repo # git -C is not used here to support git versions older than 1.8.4 git status --short &> /dev/null || rc=$? # Move back into the directory the user started in popd &> /dev/null || return 1 else # Set a non-zero return code if directory does not exist rc=1 fi # Return the code; if one is not set, return 0 return "${rc:-0}" } # A function to clone a repo make_repo() { # Set named variables for better readability local directory="${1}" local remoteRepo="${2}" # The message to display when this function is running str="Clone ${remoteRepo} into ${directory}" # Display the message and use the color table to preface the message with an "info" indicator printf " %b %s..." "${INFO}" "${str}" # If the directory exists, if [[ -d "${directory}" ]]; then # Return with a 1 to exit the installer. We don't want to overwrite what could already be here in case it is not ours str="Unable to clone ${remoteRepo} into ${directory} : Directory already exists" printf "%b %b%s\\n" "${OVER}" "${CROSS}" "${str}" return 1 fi # Clone the repo and return the return code from this command git clone -q --depth 20 "${remoteRepo}" "${directory}" &>/dev/null || return $? # Move into the directory that was passed as an argument pushd "${directory}" &>/dev/null || return 1 # Check current branch. If it is master, then reset to the latest available tag. # In case extra commits have been added after tagging/release (i.e in case of metadata updates/README.MD tweaks) curBranch=$(git rev-parse --abbrev-ref HEAD) if [[ "${curBranch}" == "master" ]]; then # If we're calling make_repo() then it should always be master, we may not need to check. git reset --hard "$(git describe --abbrev=0 --tags)" || return $? fi # Show a colored message showing it's status printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" # Data in the repositories is public anyway so we can make it readable by everyone (+r to keep executable permission if already set by git) chmod -R a+rX "${directory}" # Move back into the original directory popd &>/dev/null || return 1 return 0 } # We need to make sure the repos are up-to-date so we can effectively install Clean out the directory if it exists for git to clone into update_repo() { # Use named, local variables # As you can see, these are the same variable names used in the last function, # but since they are local, their scope does not go beyond this function # This helps prevent the wrong value from being assigned if you were to set the variable as a GLOBAL one local directory="${1}" local curBranch # A variable to store the message we want to display; # Again, it's useful to store these in variables in case we need to reuse or change the message; # we only need to make one change here local str="Update repo in ${1}" # Move into the directory that was passed as an argument pushd "${directory}" &>/dev/null || return 1 # Let the user know what's happening printf " %b %s..." "${INFO}" "${str}" # Stash any local commits as they conflict with our working code git stash --all --quiet &>/dev/null || true # Okay for stash failure git clean --quiet --force -d || true # Okay for already clean directory # Pull the latest commits git pull --no-rebase --quiet &>/dev/null || return $? # Check current branch. If it is master, then reset to the latest available tag. # In case extra commits have been added after tagging/release (i.e in case of metadata updates/README.MD tweaks) curBranch=$(git rev-parse --abbrev-ref HEAD) if [[ "${curBranch}" == "master" ]]; then git reset --hard "$(git describe --abbrev=0 --tags)" || return $? fi # Show a completion message printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" # Data in the repositories is public anyway so we can make it readable by everyone (+r to keep executable permission if already set by git) chmod -R a+rX "${directory}" # Move back into the original directory popd &>/dev/null || return 1 return 0 } # A function that combines the previous git functions to update or clone a repo getGitFiles() { # Setup named variables for the git repos # We need the directory local directory="${1}" # as well as the repo URL local remoteRepo="${2}" # A local variable containing the message to be displayed local str="Check for existing repository in ${1}" # Show the message printf " %b %s..." "${INFO}" "${str}" # Check if the directory is a repository if is_repo "${directory}"; then # Show that we're checking it printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" # Update the repo, returning an error message on failure update_repo "${directory}" || { printf "\\n %b: Could not update local repository. Contact support.%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 } # If it's not a .git repo, else # Show an error printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" # Attempt to make the repository, showing an error on failure make_repo "${directory}" "${remoteRepo}" || { printf "\\n %bError: Could not update local repository. Contact support.%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 } fi echo "" # Success via one of the two branches, as the commands would exit if they failed. return 0 } # Reset a repo to get rid of any local changed resetRepo() { # Use named variables for arguments local directory="${1}" # Move into the directory pushd "${directory}" &>/dev/null || return 1 # Store the message in a variable str="Resetting repository within ${1}..." # Show the message printf " %b %s..." "${INFO}" "${str}" # Use git to remove the local changes git reset --hard &>/dev/null || return $? # Data in the repositories is public anyway so we can make it readable by everyone (+r to keep executable permission if already set by git) chmod -R a+rX "${directory}" # And show the status printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" # Return to where we came from popd &>/dev/null || return 1 # Function succeeded, as "git reset" would have triggered a return earlier if it failed return 0 } find_IPv4_information() { # Detects IPv4 address used for communication to WAN addresses. # Accepts no arguments, returns no values. # Named, local variables local route local IPv4bare # Find IP used to route to outside world by checking the route to Google's public DNS server route=$(ip route get 8.8.8.8) # Get just the interface IPv4 address # shellcheck disable=SC2059,SC2086 # disabled as we intentionally want to split on whitespace and have printf populate # the variable with just the first field. printf -v IPv4bare "$(printf ${route#*src })" if ! valid_ip "${IPv4bare}"; then IPv4bare="127.0.0.1" fi # Append the CIDR notation to the IP address, if valid_ip fails this should return 127.0.0.1/8 IPV4_ADDRESS=$(ip -oneline -family inet address show | grep "${IPv4bare}/" | awk '{print $4}' | awk 'END {print}') } # Get available interfaces that are UP get_available_interfaces() { # There may be more than one so it's all stored in a variable availableInterfaces=$(ip --oneline link show up | grep -v "lo" | awk '{print $2}' | cut -d':' -f1 | cut -d'@' -f1) } # A function for displaying the dialogs the user sees when first running the installer welcomeDialogs() { # Display the welcome dialog using an appropriately sized window via the calculation conducted earlier in the script dialog --no-shadow --clear --keep-tite \ --backtitle "Welcome" \ --title "Pi-hole Automated Installer" \ --msgbox "\\n\\nThis installer will transform your device into a network-wide ad blocker!" \ "${r}" "${c}" \ --and-widget --clear \ --backtitle "Support Pi-hole" \ --title "Open Source Software" \ --msgbox "\\n\\nThe Pi-hole is free, but powered by your donations: https://pi-hole.net/donate/" \ "${r}" "${c}" \ --and-widget --clear \ --colors \ --backtitle "Initiating network interface" \ --title "Static IP Needed" \ --no-button "Exit" --yes-button "Continue" \ --defaultno \ --yesno "\\n\\nThe Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.\\n\\n\ \\Zb\\Z1IMPORTANT:\\Zn If you have not already done so, you must ensure that this device has a static IP.\\n\\n\ Depending on your operating system, there are many ways to achieve this, through DHCP reservation, or by manually assigning one.\\n\\n\ Please continue when the static addressing has been configured." \ "${r}" "${c}" && result=0 || result="$?" case "${result}" in "${DIALOG_CANCEL}" | "${DIALOG_ESC}") printf " %b Installer exited at static IP message.\\n" "${INFO}" exit 1 ;; esac } # A function that lets the user pick an interface to use with Pi-hole chooseInterface() { # Turn the available interfaces into a string so it can be used with dialog local interfacesList # Number of available interfaces local interfaceCount # POSIX compliant way to get the number of elements in an array interfaceCount=$(printf "%s\n" "${availableInterfaces}" | wc -l) # If there is one interface, if [[ "${interfaceCount}" -eq 1 ]]; then # Set it as the interface to use since there is no other option PIHOLE_INTERFACE="${availableInterfaces}" # Otherwise, else # Set status for the first entry to be selected status="ON" # While reading through the available interfaces for interface in ${availableInterfaces}; do # Put all these interfaces into a string interfacesList="${interfacesList}${interface} available ${status} " # All further interfaces are deselected status="OFF" done # shellcheck disable=SC2086 # Disable check for double quote here as we are passing a string with spaces PIHOLE_INTERFACE=$(dialog --no-shadow --keep-tite --output-fd 1 \ --cancel-label "Exit" --ok-label "Select" \ --radiolist "Choose An Interface (press space to toggle selection)" \ ${r} ${c} "${interfaceCount}" ${interfacesList}) result=$? case ${result} in "${DIALOG_CANCEL}" | "${DIALOG_ESC}") # Show an error message and exit printf " %b %s\\n" "${CROSS}" "No interface selected, exiting installer" exit 1 ;; esac printf " %b Using interface: %s\\n" "${INFO}" "${PIHOLE_INTERFACE}" fi } # This lets us prefer ULA addresses over GUA # This caused problems for some users when their ISP changed their IPv6 addresses # See https://github.com/pi-hole/pi-hole/issues/1473#issuecomment-301745953 testIPv6() { # first will contain fda2 (ULA) printf -v first "%s" "${1%%:*}" # value1 will contain 253 which is the decimal value corresponding to 0xFD value1=$(((0x$first) / 256)) # value2 will contain 162 which is the decimal value corresponding to 0xA2 value2=$(((0x$first) % 256)) # the ULA test is testing for fc00::/7 according to RFC 4193 if (((value1 & 254) == 252)); then # echoing result to calling function as return value echo "ULA" fi # the GUA test is testing for 2000::/3 according to RFC 4291 if (((value1 & 112) == 32)); then # echoing result to calling function as return value echo "GUA" fi # the LL test is testing for fe80::/10 according to RFC 4193 if (((value1) == 254)) && (((value2 & 192) == 128)); then # echoing result to calling function as return value echo "Link-local" fi } find_IPv6_information() { # Detects IPv6 address used for communication to WAN addresses. mapfile -t IPV6_ADDRESSES <<<"$(ip -6 address | grep 'scope global' | awk '{print $2}')" # For each address in the array above, determine the type of IPv6 address it is for i in "${IPV6_ADDRESSES[@]}"; do # Check if it's ULA, GUA, or LL by using the function created earlier result=$(testIPv6 "$i") # If it's a ULA address, use it and store it as a global variable [[ "${result}" == "ULA" ]] && ULA_ADDRESS="${i%/*}" # If it's a GUA address, use it and store it as a global variable [[ "${result}" == "GUA" ]] && GUA_ADDRESS="${i%/*}" # Else if it's a Link-local address, we cannot use it, so just continue done # Determine which address to be used: Prefer ULA over GUA or don't use any if none found # If the ULA_ADDRESS contains a value, if [[ -n "${ULA_ADDRESS}" ]]; then # set the IPv6 address to the ULA address IPV6_ADDRESS="${ULA_ADDRESS}" # Show this info to the user printf " %b Found IPv6 ULA address\\n" "${INFO}" # Otherwise, if the GUA_ADDRESS has a value, elif [[ -n "${GUA_ADDRESS}" ]]; then # Let the user know printf " %b Found IPv6 GUA address\\n" "${INFO}" # And assign it to the global variable IPV6_ADDRESS="${GUA_ADDRESS}" # If none of those work, else printf " %b Unable to find IPv6 ULA/GUA address\\n" "${INFO}" # So set the variable to be empty IPV6_ADDRESS="" fi } # A function to collect IPv4 and IPv6 information of the device collect_v4andv6_information() { find_IPv4_information printf " %b IPv4 address: %s\\n" "${INFO}" "${IPV4_ADDRESS}" find_IPv6_information printf " %b IPv6 address: %s\\n" "${INFO}" "${IPV6_ADDRESS}" } # Check an IP address to see if it is a valid one valid_ip() { # Local, named variables local ip=${1} local stat=1 # Regex matching one IPv4 component, i.e. an integer from 0 to 255. # See https://tools.ietf.org/html/rfc1340 local ipv4elem="(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9][0-9]?|0)" # Regex matching an optional port (starting with '#') range of 1-65536 local portelem="(#(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))?" # Build a full IPv4 regex from the above subexpressions local regex="^${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}\\.${ipv4elem}${portelem}$" # Evaluate the regex, and return the result [[ $ip =~ ${regex} ]] stat=$? return "${stat}" } valid_ip6() { local ip=${1} local stat=1 # Regex matching one IPv6 element, i.e. a hex value from 0000 to FFFF local ipv6elem="[0-9a-fA-F]{1,4}" # Regex matching an IPv6 CIDR, i.e. 1 to 128 local v6cidr="(\\/([1-9]|[1-9][0-9]|1[0-1][0-9]|12[0-8])){0,1}" # Regex matching an optional port (starting with '#') range of 1-65536 local portelem="(#(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))?" # Build a full IPv6 regex from the above subexpressions local regex="^(((${ipv6elem}))*((:${ipv6elem}))*::((${ipv6elem}))*((:${ipv6elem}))*|((${ipv6elem}))((:${ipv6elem})){7})${v6cidr}${portelem}$" # Evaluate the regex, and return the result [[ ${ip} =~ ${regex} ]] stat=$? return "${stat}" } # A function to choose the upstream DNS provider(s) setDNS() { # Local, named variables local DNSSettingsCorrect # In an array, list the available upstream providers DNSChooseOptions=() local DNSServerCount=0 # Save the old Internal Field Separator in a variable, OIFS=$IFS # and set the new one to newline IFS=$'\n' # Put the DNS Servers into an array for DNSServer in ${DNS_SERVERS}; do DNSName="$(cut -d';' -f1 <<<"${DNSServer}")" DNSChooseOptions[DNSServerCount]="${DNSName}" ((DNSServerCount = DNSServerCount + 1)) DNSChooseOptions[DNSServerCount]="" ((DNSServerCount = DNSServerCount + 1)) done DNSChooseOptions[DNSServerCount]="Custom" ((DNSServerCount = DNSServerCount + 1)) DNSChooseOptions[DNSServerCount]="" # Restore the IFS to what it was IFS=${OIFS} # In a dialog, show the options DNSchoices=$(dialog --no-shadow --keep-tite --output-fd 1 \ --cancel-label "Exit" \ --menu "Select Upstream DNS Provider. To use your own, select Custom." "${r}" "${c}" 7 \ "${DNSChooseOptions[@]}") result=$? case ${result} in "${DIALOG_CANCEL}" | "${DIALOG_ESC}") printf " %b Cancel was selected, exiting installer%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 ;; esac # Depending on the user's choice, set the GLOBAL variables to the IP of the respective provider if [[ "${DNSchoices}" == "Custom" ]]; then # Loop until we have a valid DNS setting until [[ "${DNSSettingsCorrect}" = True ]]; do # Signal value, to be used if the user inputs an invalid IP address strInvalid="Invalid" if [[ ! "${PIHOLE_DNS_1}" ]]; then if [[ ! "${PIHOLE_DNS_2}" ]]; then # If the first and second upstream servers do not exist, do not prepopulate an IP address prePopulate="" else # Otherwise, prepopulate the dialogue with the appropriate DNS value(s) prePopulate=", ${PIHOLE_DNS_2}" fi elif [[ "${PIHOLE_DNS_1}" ]] && [[ ! "${PIHOLE_DNS_2}" ]]; then prePopulate="${PIHOLE_DNS_1}" elif [[ "${PIHOLE_DNS_1}" ]] && [[ "${PIHOLE_DNS_2}" ]]; then prePopulate="${PIHOLE_DNS_1}, ${PIHOLE_DNS_2}" fi # Prompt the user to enter custom upstream servers piholeDNS=$(dialog --no-shadow --keep-tite --output-fd 1 \ --cancel-label "Exit" \ --backtitle "Specify Upstream DNS Provider(s)" \ --inputbox "Enter your desired upstream DNS provider(s), separated by a comma.\ If you want to specify a port other than 53, separate it with a hash.\ \\n\\nFor example '8.8.8.8, 8.8.4.4' or '127.0.0.1#5335'" \ "${r}" "${c}" "${prePopulate}") result=$? case ${result} in "${DIALOG_CANCEL}" | "${DIALOG_ESC}") printf " %b Cancel was selected, exiting installer%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 ;; esac # Clean user input and replace whitespace with comma. piholeDNS=$(sed 's/[, \t]\+/,/g' <<<"${piholeDNS}") # Separate the user input into the two DNS values (separated by a comma) printf -v PIHOLE_DNS_1 "%s" "${piholeDNS%%,*}" printf -v PIHOLE_DNS_2 "%s" "${piholeDNS##*,}" # If the first DNS value is invalid (neither IPv4 nor IPv6) or empty, set PIHOLE_DNS_1="Invalid" if ! valid_ip "${PIHOLE_DNS_1}" && ! valid_ip6 "${PIHOLE_DNS_1}" || [[ -z "${PIHOLE_DNS_1}" ]]; then PIHOLE_DNS_1=${strInvalid} fi # If the second DNS value is invalid but not empty, set PIHOLE_DNS_2="Invalid" if ! valid_ip "${PIHOLE_DNS_2}" && ! valid_ip6 "${PIHOLE_DNS_2}" && [[ -n "${PIHOLE_DNS_2}" ]]; then PIHOLE_DNS_2=${strInvalid} fi # If either of the DNS servers are invalid, if [[ "${PIHOLE_DNS_1}" == "${strInvalid}" ]] || [[ "${PIHOLE_DNS_2}" == "${strInvalid}" ]]; then # explain this to the user, dialog --no-shadow --keep-tite \ --title "Invalid IP Address(es)" \ --backtitle "Invalid IP" \ --msgbox "\\nOne or both of the entered IP addresses were invalid. Please try again.\ \\n\\nInvalid IPs: ${PIHOLE_DNS_1}, ${PIHOLE_DNS_2}" \ "${r}" "${c}" # set the variables back to nothing, if [[ "${PIHOLE_DNS_1}" == "${strInvalid}" ]]; then PIHOLE_DNS_1="" fi if [[ "${PIHOLE_DNS_2}" == "${strInvalid}" ]]; then PIHOLE_DNS_2="" fi # and continue the loop. DNSSettingsCorrect=False else dialog --no-shadow --no-collapse --keep-tite \ --backtitle "Specify Upstream DNS Provider(s)" \ --title "Upstream DNS Provider(s)" \ --yesno "Are these settings correct?\\n"$'\t'"DNS Server 1:"$'\t'"${PIHOLE_DNS_1}\\n"$'\t'"DNS Server 2:"$'\t'"${PIHOLE_DNS_2}" \ "${r}" "${c}" && result=0 || result=$? case ${result} in "${DIALOG_OK}") DNSSettingsCorrect=True ;; "${DIALOG_CANCEL}") DNSSettingsCorrect=False ;; "${DIALOG_ESC}") printf " %b Escape pressed, exiting installer at DNS Settings%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 ;; esac fi done else # Save the old Internal Field Separator in a variable, OIFS=$IFS # and set the new one to newline IFS=$'\n' for DNSServer in ${DNS_SERVERS}; do DNSName="$(cut -d';' -f1 <<<"${DNSServer}")" if [[ "${DNSchoices}" == "${DNSName}" ]]; then PIHOLE_DNS_1="$(cut -d';' -f2 <<<"${DNSServer}")" PIHOLE_DNS_2="$(cut -d';' -f3 <<<"${DNSServer}")" break fi done # Restore the IFS to what it was IFS=${OIFS} fi # Display final selection local DNSIP=${PIHOLE_DNS_1} [[ -z ${PIHOLE_DNS_2} ]] || DNSIP+=", ${PIHOLE_DNS_2}" printf " %b Using upstream DNS: %s (%s)\\n" "${INFO}" "${DNSchoices}" "${DNSIP}" } # Allow the user to enable/disable logging setLogging() { # Ask the user if they want to enable logging dialog --no-shadow --keep-tite \ --backtitle "Pihole Installation" \ --title "Enable Logging" \ --yesno "\\n\\nWould you like to enable query logging?" \ "${r}" "${c}" && result=0 || result=$? case ${result} in "${DIALOG_OK}") # If they chose yes, printf " %b Query Logging on.\\n" "${INFO}" QUERY_LOGGING=true ;; "${DIALOG_CANCEL}") # If they chose no, printf " %b Query Logging off.\\n" "${INFO}" QUERY_LOGGING=false ;; "${DIALOG_ESC}") # User pressed printf " %b Escape pressed, exiting installer at Query Logging choice.%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 ;; esac } # Allow the user to set their FTL privacy level setPrivacyLevel() { # The default selection is level 0 PRIVACY_LEVEL=$(dialog --no-shadow --keep-tite --output-fd 1 \ --cancel-label "Exit" \ --ok-label "Continue" \ --radiolist "Select a privacy mode for FTL. https://docs.pi-hole.net/ftldns/privacylevels/" \ "${r}" "${c}" 6 \ "0" "Show everything" on \ "1" "Hide domains" off \ "2" "Hide domains and clients" off \ "3" "Anonymous mode" off) result=$? case ${result} in "${DIALOG_OK}") printf " %b Using privacy level: %s\\n" "${INFO}" "${PRIVACY_LEVEL}" ;; "${DIALOG_CANCEL}" | "${DIALOG_ESC}") printf " %b Cancelled privacy level selection.%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 ;; esac } # A function to display a list of example blocklists for users to select chooseBlocklists() { # Back up any existing adlist file, on the off chance that it exists. Useful in case of a reconfigure. if [[ -f "${adlistFile}" ]]; then mv "${adlistFile}" "${adlistFile}.old" fi # Let user select (or not) blocklists dialog --no-shadow --keep-tite \ --backtitle "Pi-hole Installation" \ --title "Blocklists" \ --yesno "\\nPi-hole relies on third party lists in order to block ads.\ \\n\\nYou can use the suggestion below, and/or add your own after installation.\ \\n\\nSelect 'Yes' to include:\ \\n\\nStevenBlack's Unified Hosts List" \ "${r}" "${c}" && result=0 || result=$? case ${result} in "${DIALOG_OK}") # If they chose yes, printf " %b Installing StevenBlack's Unified Hosts List\\n" "${INFO}" echo "https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts" >>"${adlistFile}" ;; "${DIALOG_CANCEL}") # If they chose no, printf " %b Not installing StevenBlack's Unified Hosts List\\n" "${INFO}" ;; "${DIALOG_ESC}") # User pressed printf " %b Escape pressed, exiting installer at blocklist choice.%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 ;; esac # Create an empty adList file with appropriate permissions. if [ ! -f "${adlistFile}" ]; then install -m 644 /dev/null "${adlistFile}" else chmod 644 "${adlistFile}" fi } # Used only in unattended setup # If there is already the adListFile, we keep it, else we create it using all default lists installDefaultBlocklists() { # In unattended setup, could be useful to use userdefined blocklist. # If this file exists, we avoid overriding it. if [[ -f "${adlistFile}" ]]; then return fi echo "https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts" >>"${adlistFile}" } remove_old_dnsmasq_ftl_configs() { # Local, named variables local dnsmasq_conf="/etc/dnsmasq.conf" local pihole_01="/etc/dnsmasq.d/01-pihole.conf" local rfc6761_06="/etc/dnsmasq.d/06-rfc6761.conf" local pihole_dhcp_02="/etc/dnsmasq.d/02-pihole-dhcp.conf" # pihole-FTL does some fancy stuff with config these days, and so we can remove some old config files if [[ -f "${pihole_01}" ]]; then rm "${pihole_01}" fi if [[ -f "${rfc6761_06}" ]]; then rm "${rfc6761_06}" fi if [[ -f "${pihole_dhcp_02}" ]]; then rm "${pihole_dhcp_02}" fi # If the dnsmasq config file exists if [[ -f "${dnsmasq_conf}" ]]; then # There should not be anything custom in here for Pi-hole users # It is no longer needed, but we'll back it up instead of deleting it just in case mv "${dnsmasq_conf}" "${dnsmasq_conf}.old" fi # Create /etc/dnsmasq.d if it doesn't exist if [[ ! -d "/etc/dnsmasq.d" ]]; then mkdir "/etc/dnsmasq.d" fi } remove_old_pihole_lighttpd_configs() { local lighttpdConfig="/etc/lighttpd/lighttpd.conf" local condfd="/etc/lighttpd/conf.d/pihole-admin.conf" local confavailable="/etc/lighttpd/conf-available/15-pihole-admin.conf" local confenabled="/etc/lighttpd/conf-enabled/15-pihole-admin.conf" if [[ -f "${lighttpdConfig}" ]]; then sed -i '/include "\/etc\/lighttpd\/conf.d\/pihole-admin.conf"/d' "${lighttpdConfig}" fi if [[ -f "${condfd}" ]]; then rm "${condfd}" fi if is_command lighty-disable-mod; then lighty-disable-mod pihole-admin >/dev/null || true fi if [[ -f "${confavailable}" ]]; then rm "${confavailable}" fi if [[ -f "${confenabled}" ]]; then rm "${confenabled}" fi } # Clean an existing installation to prepare for upgrade/reinstall clean_existing() { # Local, named variables # ${1} Directory to clean local clean_directory="${1}" # Pop the first argument, and shift all addresses down by one (i.e. ${2} becomes ${1}) shift # Then, we can access all arguments ($@) without including the directory to clean local old_files=("$@") # Remove each script in the old_files array for script in "${old_files[@]}"; do rm -f "${clean_directory}/${script}.sh" done } # Install the scripts from repository to their various locations installScripts() { # Local, named variables local str="Installing scripts from ${PI_HOLE_LOCAL_REPO}" printf " %b %s..." "${INFO}" "${str}" # Clear out script files from Pi-hole scripts directory. clean_existing "${PI_HOLE_INSTALL_DIR}" "${PI_HOLE_FILES[@]}" # Install files from local core repository if is_repo "${PI_HOLE_LOCAL_REPO}"; then # move into the directory cd "${PI_HOLE_LOCAL_REPO}" # Install the scripts by: # -o setting the owner to the user # -Dm755 create all leading components of destination except the last, then copy the source to the destination and setting the permissions to 755 # # This first one is the directory install -o "${USER}" -Dm755 -d "${PI_HOLE_INSTALL_DIR}" # The rest are the scripts Pi-hole needs install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" gravity.sh install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/*.sh install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./automated\ install/uninstall.sh install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/COL_TABLE install -o "${USER}" -Dm755 -t "${PI_HOLE_BIN_DIR}" pihole install -Dm644 ./advanced/bash-completion/pihole /etc/bash_completion.d/pihole printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" else # Otherwise, show an error and exit printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" printf "\\t\\t%bError: Local repo %s not found, exiting installer%b\\n" "${COL_LIGHT_RED}" "${PI_HOLE_LOCAL_REPO}" "${COL_NC}" return 1 fi } # Install the configs from PI_HOLE_LOCAL_REPO to their various locations installConfigs() { printf "\\n %b Installing configs from %s...\\n" "${INFO}" "${PI_HOLE_LOCAL_REPO}" # Ensure that permissions are correctly set chown -R pihole:pihole /etc/pihole # Install list of DNS servers # Format: Name;Primary IPv4;Secondary IPv4;Primary IPv6;Secondary IPv6 # Some values may be empty (for example: DNS servers without IPv6 support) echo "${DNS_SERVERS}" >"${PI_HOLE_CONFIG_DIR}/dns-servers.conf" chmod 644 "${PI_HOLE_CONFIG_DIR}/dns-servers.conf" chown pihole:pihole "${PI_HOLE_CONFIG_DIR}/dns-servers.conf" # Install empty custom.list file if it does not exist if [[ ! -r "${PI_HOLE_CONFIG_DIR}/hosts/custom.list" ]]; then if ! install -D -T -o pihole -g pihole -m 660 /dev/null "${PI_HOLE_CONFIG_DIR}/hosts/custom.list" &>/dev/null; then printf " %b Error: Unable to initialize configuration file %s/custom.list\\n" "${COL_LIGHT_RED}" "${PI_HOLE_CONFIG_DIR}/hosts" return 1 fi fi # Install pihole-FTL systemd or init.d service, based on whether systemd is the init system or not # Follow debhelper logic, which checks for /run/systemd/system to derive whether systemd is the init system if [[ -d '/run/systemd/system' ]]; then install -T -m 0644 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.systemd" '/etc/systemd/system/pihole-FTL.service' # Remove init.d service if present if [[ -e '/etc/init.d/pihole-FTL' ]]; then rm '/etc/init.d/pihole-FTL' update-rc.d pihole-FTL remove fi # Load final service systemctl daemon-reload else install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL.service" '/etc/init.d/pihole-FTL' fi install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL-prestart.sh" "${PI_HOLE_INSTALL_DIR}/pihole-FTL-prestart.sh" install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole-FTL-poststop.sh" "${PI_HOLE_INSTALL_DIR}/pihole-FTL-poststop.sh" } install_manpage() { # Copy Pi-hole man pages and call mandb to update man page database # Default location for man files for /usr/local/bin is /usr/local/share/man # on lightweight systems may not be present, so check before copying. printf " %b Testing man page installation" "${INFO}" if ! is_command mandb; then # if mandb is not present, no manpage support printf "%b %b man not installed\\n" "${OVER}" "${INFO}" return elif [[ ! -d "/usr/local/share/man" ]]; then # appropriate directory for Pi-hole's man page is not present printf "%b %b man pages not installed\\n" "${OVER}" "${INFO}" return fi if [[ ! -d "/usr/local/share/man/man8" ]]; then # if not present, create man8 directory install -d -m 755 /usr/local/share/man/man8 fi if [[ ! -d "/usr/local/share/man/man5" ]]; then # if not present, create man5 directory install -d -m 755 /usr/local/share/man/man5 fi # Testing complete, copy the files & update the man db install -D -m 644 -T ${PI_HOLE_LOCAL_REPO}/manpages/pihole.8 /usr/local/share/man/man8/pihole.8 # remove previously installed man pages if [[ -f "/usr/local/share/man/man5/pihole-FTL.conf.5" ]]; then rm /usr/local/share/man/man5/pihole-FTL.conf.5 fi if [[ -f "/usr/local/share/man/man8/pihole-FTL.8" ]]; then rm /usr/local/share/man/man8/pihole-FTL.8 fi if mandb -q &>/dev/null; then # Updated successfully printf "%b %b man pages installed and database updated\\n" "${OVER}" "${TICK}" return else # Something is wrong with the system's man installation, clean up # our files, (leave everything how we found it). rm /usr/local/share/man/man8/pihole.8 printf "%b %b man page db not updated, man pages not installed\\n" "${OVER}" "${CROSS}" fi } stop_service() { # Stop service passed in as argument. # Can softfail, as process may not be installed when this is called local str="Stopping ${1} service" printf " %b %s..." "${INFO}" "${str}" if is_command systemctl; then systemctl stop "${1}" &>/dev/null || true else service "${1}" stop &>/dev/null || true fi printf "%b %b %s...\\n" "${OVER}" "${TICK}" "${str}" } # Start/Restart service passed in as argument restart_service() { # Local, named variables local str="Restarting ${1} service" printf " %b %s..." "${INFO}" "${str}" # If systemctl exists, if is_command systemctl; then # use that to restart the service systemctl restart "${1}" &>/dev/null else # Otherwise, fall back to the service command service "${1}" restart &>/dev/null fi printf "%b %b %s...\\n" "${OVER}" "${TICK}" "${str}" } # Enable service so that it will start with next reboot enable_service() { # Local, named variables local str="Enabling ${1} service to start on reboot" printf " %b %s..." "${INFO}" "${str}" # If systemctl exists, if is_command systemctl; then # use that to enable the service systemctl enable "${1}" &>/dev/null else # Otherwise, use update-rc.d to accomplish this update-rc.d "${1}" defaults &>/dev/null fi printf "%b %b %s...\\n" "${OVER}" "${TICK}" "${str}" } # Disable service so that it will not with next reboot disable_service() { # Local, named variables local str="Disabling ${1} service" printf " %b %s..." "${INFO}" "${str}" # If systemctl exists, if is_command systemctl; then # use that to disable the service systemctl disable "${1}" &>/dev/null else # Otherwise, use update-rc.d to accomplish this update-rc.d "${1}" disable &>/dev/null fi printf "%b %b %s...\\n" "${OVER}" "${TICK}" "${str}" } check_service_active() { # If systemctl exists, if is_command systemctl; then # use that to check the status of the service systemctl is-enabled "${1}" &>/dev/null else # Otherwise, fall back to service command service "${1}" status &>/dev/null fi } # Systemd-resolved's DNSStubListener and ftl can't share port 53. disable_resolved_stublistener() { printf " %b Testing if systemd-resolved is enabled\\n" "${INFO}" # Check if Systemd-resolved's DNSStubListener is enabled and active on port 53 if check_service_active "systemd-resolved"; then # Check if DNSStubListener is enabled printf " %b %b Testing if systemd-resolved DNSStub-Listener is active" "${OVER}" "${INFO}" if (grep -E '#?DNSStubListener=yes' /etc/systemd/resolved.conf &>/dev/null); then # Disable the DNSStubListener to unbind it from port 53 # Note that this breaks dns functionality on host until ftl are up and running printf "%b %b Disabling systemd-resolved DNSStubListener" "${OVER}" "${TICK}" # Make a backup of the original /etc/systemd/resolved.conf # (This will need to be restored on uninstallation) sed -r -i.orig 's/#?DNSStubListener=yes/DNSStubListener=no/g' /etc/systemd/resolved.conf printf " and restarting systemd-resolved\\n" systemctl reload-or-restart systemd-resolved else printf "%b %b Systemd-resolved does not need to be restarted\\n" "${OVER}" "${INFO}" fi else printf "%b %b Systemd-resolved is not enabled\\n" "${OVER}" "${INFO}" fi } update_package_cache() { # Update package cache on apt based OSes. Do this every time since # it's quick and packages can be updated at any time. # Local, named variables local str="Update local cache of available packages" printf " %b %s..." "${INFO}" "${str}" # Create a command from the package cache variable if eval "${UPDATE_PKG_CACHE}" &>/dev/null; then printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" else # Otherwise, show an error and exit # In case we used apt-get and apt is also available, we use this as recommendation as we have seen it # gives more user-friendly (interactive) advice if [[ ${PKG_MANAGER} == "apt-get" ]] && is_command apt; then UPDATE_PKG_CACHE="apt update" fi printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" printf " %b Error: Unable to update package cache. Please try \"%s\"%b\\n" "${COL_LIGHT_RED}" "sudo ${UPDATE_PKG_CACHE}" "${COL_NC}" return 1 fi } # Let user know if they have outdated packages on their system and # advise them to run a package update at soonest possible. notify_package_updates_available() { # Local, named variables local str="Checking ${PKG_MANAGER} for upgraded packages" printf "\\n %b %s..." "${INFO}" "${str}" # Store the list of packages in a variable updatesToInstall=$(eval "${PKG_COUNT}") if [[ -d "/lib/modules/$(uname -r)" ]]; then if [[ "${updatesToInstall}" -eq 0 ]]; then printf "%b %b %s... up to date!\\n\\n" "${OVER}" "${TICK}" "${str}" else printf "%b %b %s... %s updates available\\n" "${OVER}" "${TICK}" "${str}" "${updatesToInstall}" printf " %b %bIt is recommended to update your OS after installing the Pi-hole!%b\\n\\n" "${INFO}" "${COL_LIGHT_GREEN}" "${COL_NC}" fi else printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" printf " Kernel update detected. If the install fails, please reboot and try again\\n" fi } install_dependent_packages() { # Install packages passed in via argument array # No spinner - conflicts with set -e declare -a installArray # Debian based package install - debconf will download the entire package list # so we just create an array of packages not currently installed to cut down on the # amount of download traffic. # NOTE: We may be able to use this installArray in the future to create a list of package that were # installed by us, and remove only the installed packages, and not the entire list. if is_command apt-get; then # For each package, check if it's already installed (and if so, don't add it to the installArray) for i in "$@"; do printf " %b Checking for %s..." "${INFO}" "${i}" if dpkg-query -W -f='${Status}' "${i}" 2>/dev/null | grep "ok installed" &>/dev/null; then printf "%b %b Checking for %s\\n" "${OVER}" "${TICK}" "${i}" else printf "%b %b Checking for %s (will be installed)\\n" "${OVER}" "${INFO}" "${i}" installArray+=("${i}") fi done # If there's anything to install, install everything in the list. if [[ "${#installArray[@]}" -gt 0 ]]; then test_dpkg_lock # Running apt-get install with minimal output can cause some issues with # requiring user input (e.g password for phpmyadmin see #218) printf " %b Processing %s install(s) for: %s, please wait...\\n" "${INFO}" "${PKG_MANAGER}" "${installArray[*]}" printf '%*s\n' "${c}" '' | tr " " - "${PKG_INSTALL[@]}" "${installArray[@]}" printf '%*s\n' "${c}" '' | tr " " - return fi printf "\\n" return 0 fi # Install Fedora/CentOS packages for i in "$@"; do # For each package, check if it's already installed (and if so, don't add it to the installArray) printf " %b Checking for %s..." "${INFO}" "${i}" if "${PKG_MANAGER}" -q list installed "${i}" &>/dev/null; then printf "%b %b Checking for %s\\n" "${OVER}" "${TICK}" "${i}" else printf "%b %b Checking for %s (will be installed)\\n" "${OVER}" "${INFO}" "${i}" installArray+=("${i}") fi done # If there's anything to install, install everything in the list. if [[ "${#installArray[@]}" -gt 0 ]]; then printf " %b Processing %s install(s) for: %s, please wait...\\n" "${INFO}" "${PKG_MANAGER}" "${installArray[*]}" printf '%*s\n' "${c}" '' | tr " " - "${PKG_INSTALL[@]}" "${installArray[@]}" printf '%*s\n' "${c}" '' | tr " " - return fi printf "\\n" return 0 } # Installs a cron file installCron() { # Install the cron job local str="Installing latest Cron script" printf "\\n %b %s..." "${INFO}" "${str}" # Copy the cron file over from the local repo # File must not be world or group writeable and must be owned by root install -D -m 644 -T -o root -g root ${PI_HOLE_LOCAL_REPO}/advanced/Templates/pihole.cron /etc/cron.d/pihole # Randomize gravity update time sed -i "s/59 1 /$((1 + RANDOM % 58)) $((3 + RANDOM % 2))/" /etc/cron.d/pihole # Randomize update checker time sed -i "s/59 17/$((1 + RANDOM % 58)) $((12 + RANDOM % 8))/" /etc/cron.d/pihole printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" } # Gravity is a very important script as it aggregates all of the domains into a single HOSTS formatted list, # which is what Pi-hole needs to begin blocking ads runGravity() { # Run gravity in the current shell as user pihole { sudo -u pihole bash /opt/pihole/gravity.sh --force; } } # Check if the pihole user exists and create if it does not create_pihole_user() { local str="Checking for user 'pihole'" printf " %b %s..." "${INFO}" "${str}" # If the pihole user exists, if id -u pihole &>/dev/null; then # and if the pihole group exists, if getent group pihole >/dev/null 2>&1; then # succeed printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" else local str="Checking for group 'pihole'" printf " %b %s..." "${INFO}" "${str}" local str="Creating group 'pihole'" # if group can be created if groupadd pihole; then printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" local str="Adding user 'pihole' to group 'pihole'" printf " %b %s..." "${INFO}" "${str}" # if pihole user can be added to group pihole if usermod -g pihole pihole; then printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" else printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" fi else printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" fi fi else # If the pihole user doesn't exist, printf "%b %b %s" "${OVER}" "${CROSS}" "${str}" local str="Checking for group 'pihole'" printf " %b %s..." "${INFO}" "${str}" if getent group pihole >/dev/null 2>&1; then # group pihole exists printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" # then create and add her to the pihole group local str="Creating user 'pihole'" printf "%b %b %s..." "${OVER}" "${INFO}" "${str}" if useradd -r --no-user-group -g pihole -s /usr/sbin/nologin pihole; then printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" else printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" fi else # group pihole does not exist printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" local str="Creating group 'pihole'" # if group can be created if groupadd pihole; then printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" # create and add pihole user to the pihole group local str="Creating user 'pihole'" printf "%b %b %s..." "${OVER}" "${INFO}" "${str}" if useradd -r --no-user-group -g pihole -s /usr/sbin/nologin pihole; then printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" else printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" fi else printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" fi fi fi } # Install the logrotate script installLogrotate() { local str="Installing latest logrotate script" local target=/etc/pihole/logrotate local logfileUpdate=false printf "\\n %b %s..." "${INFO}" "${str}" if [[ -f ${target} ]]; then # Account for changed logfile paths from /var/log -> /var/log/pihole/ made in core v5.11. if grep -q "/var/log/pihole.log" ${target} || grep -q "/var/log/pihole-FTL.log" ${target}; then sed -i 's/\/var\/log\/pihole.log/\/var\/log\/pihole\/pihole.log/g' ${target} sed -i 's/\/var\/log\/pihole-FTL.log/\/var\/log\/pihole\/FTL.log/g' ${target} printf "\\n\\t%b Old log file paths updated in existing logrotate file. \\n" "${INFO}" logfileUpdate=true fi # Account for added webserver.log in v6.0 if ! grep -q "/var/log/pihole/webserver.log" ${target}; then echo "/var/log/pihole/webserver.log { # su # weekly copytruncate rotate 3 compress delaycompress notifempty nomail }" >> ${target} printf "\\n\\t%b webserver.log added to logrotate file. \\n" "${INFO}" logfileUpdate=true fi if [[ "${logfileUpdate}" == false ]]; then printf "\\n\\t%b Existing logrotate file found. No changes made.\\n" "${INFO}" return fi else # Copy the file over from the local repo # Logrotate config file must be owned by root and not writable by group or other install -o root -g root -D -m 644 -T "${PI_HOLE_LOCAL_REPO}"/advanced/Templates/logrotate ${target} fi # Different operating systems have different user / group # settings for logrotate that makes it impossible to create # a static logrotate file that will work with e.g. # Rasbian and Ubuntu at the same time. Hence, we have to # customize the logrotate script here in order to reflect # the local properties of the /var/log directory logusergroup="$(stat -c '%U %G' /var/log)" # If there is a usergroup for log rotation, if [[ -n "${logusergroup}" ]]; then # replace the line in the logrotate script with that usergroup. sed -i "s/# su #/su ${logusergroup}/g;" ${target} fi printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" } # Install base files and web interface installPihole() { # Install base files and web interface if ! installScripts; then printf " %b Failure in dependent script copy function.\\n" "${CROSS}" exit 1 fi # /opt/pihole/utils.sh should be installed by installScripts now, so we can use it if [ -f "${PI_HOLE_INSTALL_DIR}/utils.sh" ]; then # shellcheck disable=SC1091 source "${PI_HOLE_INSTALL_DIR}/utils.sh" else printf " %b Failure: /opt/pihole/utils.sh does not exist .\\n" "${CROSS}" exit 1 fi remove_old_dnsmasq_ftl_configs remove_old_pihole_lighttpd_configs # Install config files if ! installConfigs; then printf " %b Failure in dependent config copy function.\\n" "${CROSS}" exit 1 fi # Install the cron file installCron # Install the logrotate file installLogrotate || true # install a man page entry for pihole install_manpage } # SELinux checkSelinux() { local DEFAULT_SELINUX local CURRENT_SELINUX local SELINUX_ENFORCING=0 # Check for SELinux configuration file and getenforce command if [[ -f /etc/selinux/config ]] && is_command getenforce; then # Check the default SELinux mode DEFAULT_SELINUX=$(awk -F= '/^SELINUX=/ {print $2}' /etc/selinux/config) case "${DEFAULT_SELINUX,,}" in enforcing) printf " %b %bDefault SELinux: %s%b\\n" "${CROSS}" "${COL_RED}" "${DEFAULT_SELINUX,,}" "${COL_NC}" SELINUX_ENFORCING=1 ;; *) # 'permissive' and 'disabled' printf " %b %bDefault SELinux: %s%b\\n" "${TICK}" "${COL_GREEN}" "${DEFAULT_SELINUX,,}" "${COL_NC}" ;; esac # Check the current state of SELinux CURRENT_SELINUX=$(getenforce) case "${CURRENT_SELINUX,,}" in enforcing) printf " %b %bCurrent SELinux: %s%b\\n" "${CROSS}" "${COL_RED}" "${CURRENT_SELINUX,,}" "${COL_NC}" SELINUX_ENFORCING=1 ;; *) # 'permissive' and 'disabled' printf " %b %bCurrent SELinux: %s%b\\n" "${TICK}" "${COL_GREEN}" "${CURRENT_SELINUX,,}" "${COL_NC}" ;; esac else echo -e " ${INFO} ${COL_GREEN}SELinux not detected${COL_NC}" fi # Exit the installer if any SELinux checks toggled the flag if [[ "${SELINUX_ENFORCING}" -eq 1 ]] && [[ -z "${PIHOLE_SELINUX}" ]]; then printf " Pi-hole does not provide an SELinux policy as the required changes modify the security of your system.\\n" printf " Please refer to https://wiki.centos.org/HowTos/SELinux if SELinux is required for your deployment.\\n" printf " This check can be skipped by setting the environment variable %bPIHOLE_SELINUX%b to %btrue%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" "${COL_LIGHT_RED}" "${COL_NC}" printf " e.g: export PIHOLE_SELINUX=true\\n" printf " By setting this variable to true you acknowledge there may be issues with Pi-hole during or after the install\\n" printf "\\n %bSELinux Enforcing detected, exiting installer%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 elif [[ "${SELINUX_ENFORCING}" -eq 1 ]] && [[ -n "${PIHOLE_SELINUX}" ]]; then printf " %b %bSELinux Enforcing detected%b. PIHOLE_SELINUX env variable set - installer will continue\\n" "${INFO}" "${COL_LIGHT_RED}" "${COL_NC}" fi } # Installation complete message with instructions for the user displayFinalMessage() { # TODO: COME BACK TO THIS, WHAT IS GOING ON? # If the number of arguments is > 0, if [[ "${#1}" -gt 0 ]]; then # set the password to the first argument. pwstring="$1" elif [[ $(pihole-FTL --config webserver.api.pwhash) == '""' ]]; then # Else if the password exists from previous setup, we'll load it later pwstring="unchanged" else # Else, inform the user that there is no set password. pwstring="NOT SET" fi # Store a message in a variable and display it additional="View the web interface at http://pi.hole/admin:${WEBPORT} or http://${IPV4_ADDRESS%/*}:${WEBPORT}/admin\\n\\nYour Admin Webpage login password is ${pwstring}" # Final completion message to user dialog --no-shadow --keep-tite \ --title "Installation Complete!" \ --msgbox "Configure your devices to use the Pi-hole as their DNS server using:\ \\n\\nIPv4: ${IPV4_ADDRESS%/*}\ \\nIPv6: ${IPV6_ADDRESS:-"Not Configured"}\ \\nIf you have not done so already, the above IP should be set to static.\ \\n${additional}" "${r}" "${c}" } update_dialogs() { # If pihole -r "reconfigure" option was selected, if [[ "${reconfigure}" = true ]]; then # set some variables that will be used opt1a="Repair" opt1b="This will retain existing settings" strAdd="You will remain on the same version" else # Otherwise, set some variables with different values opt1a="Update" opt1b="This will retain existing settings." strAdd="You will be updated to the latest version." fi opt2a="Reconfigure" opt2b="Resets Pi-hole and allows re-selecting settings." # Display the information to the user UpdateCmd=$(dialog --no-shadow --keep-tite --output-fd 1 \ --cancel-label Exit \ --title "Existing Install Detected!" \ --menu "\\n\\nWe have detected an existing install.\ \\n\\nPlease choose from the following options:\ \\n($strAdd)" \ "${r}" "${c}" 2 \ "${opt1a}" "${opt1b}" \ "${opt2a}" "${opt2b}") || result=$? case ${result} in "${DIALOG_CANCEL}" | "${DIALOG_ESC}") printf " %b Cancel was selected, exiting installer%b\\n" "${COL_LIGHT_RED}" "${COL_NC}" exit 1 ;; esac # Set the variable based on if the user chooses case ${UpdateCmd} in # repair, or "${opt1a}") printf " %b %s option selected\\n" "${INFO}" "${opt1a}" useUpdateVars=true ;; # reconfigure, "${opt2a}") printf " %b %s option selected\\n" "${INFO}" "${opt2a}" useUpdateVars=false ;; esac } check_download_exists() { # Check if the download exists and we can reach the server local status=$(curl --head --silent "https://ftl.pi-hole.net/${1}" | head -n 1) # Check the status code if grep -q "200" <<<"$status"; then return 0 elif grep -q "404" <<<"$status"; then return 1 fi # Other error or no status code at all, e.g., no Internet, server not # available/reachable, ... return 2 } fully_fetch_repo() { # Add upstream branches to shallow clone local directory="${1}" cd "${directory}" || return 1 if is_repo "${directory}"; then git remote set-branches origin '*' || return 1 git fetch --quiet || return 1 else return 1 fi return 0 } get_available_branches() { # Return available branches local directory directory="${1}" local output cd "${directory}" || return 1 # Get reachable remote branches, but store STDERR as STDOUT variable output=$({ git ls-remote --heads --quiet | cut -d'/' -f3- -; } 2>&1) # echo status for calling function to capture echo "$output" return } fetch_checkout_pull_branch() { # Check out specified branch local directory directory="${1}" local branch branch="${2}" # Set the reference for the requested branch, fetch, check it put and pull it cd "${directory}" || return 1 git remote set-branches origin "${branch}" || return 1 git stash --all --quiet &>/dev/null || true git clean --quiet --force -d || true git fetch --quiet || return 1 checkout_pull_branch "${directory}" "${branch}" || return 1 } checkout_pull_branch() { # Check out specified branch local directory directory="${1}" local branch branch="${2}" local oldbranch cd "${directory}" || return 1 oldbranch="$(git symbolic-ref HEAD)" str="Switching to branch: '${branch}' from '${oldbranch}'" printf " %b %s" "${INFO}" "$str" git checkout "${branch}" --quiet || return 1 printf "%b %b %s\\n" "${OVER}" "${TICK}" "$str" # Data in the repositories is public anyway so we can make it readable by everyone (+r to keep executable permission if already set by git) chmod -R a+rX "${directory}" git_pull=$(git pull --no-rebase || return 1) printf " %b %s\\n" "${INFO}" "${git_pull}" return 0 } clone_or_update_repos() { # If the user wants to reconfigure, if [[ "${reconfigure}" == true ]]; then printf " %b Performing reconfiguration, skipping download of local repos\\n" "${INFO}" # Reset the Core repo resetRepo ${PI_HOLE_LOCAL_REPO} || { printf " %b Unable to reset %s, exiting installer%b\\n" "${COL_LIGHT_RED}" "${PI_HOLE_LOCAL_REPO}" "${COL_NC}" exit 1 } # Reset the Web repo resetRepo ${webInterfaceDir} || { printf " %b Unable to reset %s, exiting installer%b\\n" "${COL_LIGHT_RED}" "${webInterfaceDir}" "${COL_NC}" exit 1 } # Otherwise, a repair is happening else # so get git files for Core getGitFiles ${PI_HOLE_LOCAL_REPO} ${piholeGitUrl} || { printf " %b Unable to clone %s into %s, unable to continue%b\\n" "${COL_LIGHT_RED}" "${piholeGitUrl}" "${PI_HOLE_LOCAL_REPO}" "${COL_NC}" exit 1 } # get the Web git files getGitFiles ${webInterfaceDir} ${webInterfaceGitUrl} || { printf " %b Unable to clone %s into ${webInterfaceDir}, exiting installer%b\\n" "${COL_LIGHT_RED}" "${webInterfaceGitUrl}" "${COL_NC}" exit 1 } fi } # Download FTL binary to random temp directory and install FTL binary # Disable directive for SC2120 a value _can_ be passed to this function, but it is passed from an external script that sources this one # shellcheck disable=SC2120 FTLinstall() { # Local, named variables local str="Downloading and Installing FTL" printf " %b %s..." "${INFO}" "${str}" # Move into the temp ftl directory pushd "$(mktemp -d)" >/dev/null || { printf "Unable to make temporary directory for FTL binary download\\n" return 1 } local tempdir tempdir="$(pwd)" local ftlBranch local url if [[ -f "/etc/pihole/ftlbranch" ]]; then ftlBranch=$(/dev/null # Install the new version with the correct permissions install -T -m 0755 "${binary}" /usr/bin/pihole-FTL # Move back into the original directory the user was in popd >/dev/null || { printf "Unable to return to original directory after FTL binary download.\\n" return 1 } # Installed the FTL service printf "%b %b %s\\n" "${OVER}" "${TICK}" "${str}" # Remove temp dir remove_dir "${tempdir}" return 0 else # Otherwise, the hash download failed, so print and exit. popd >/dev/null || { printf "Unable to return to original directory after FTL binary download.\\n" return 1 } printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" printf " %b Error: Download of %s/%s failed (checksum error)%b\\n" "${COL_LIGHT_RED}" "${url}" "${binary}" "${COL_NC}" # Remove temp dir remove_dir "${tempdir}" return 1 fi else # Otherwise, the download failed, so print and exit. popd >/dev/null || { printf "Unable to return to original directory after FTL binary download.\\n" return 1 } printf "%b %b %s\\n" "${OVER}" "${CROSS}" "${str}" # The URL could not be found printf " %b Error: URL %s/%s not found%b\\n" "${COL_LIGHT_RED}" "${url}" "${binary}" "${COL_NC}" # Remove temp dir remove_dir "${tempdir}" return 1 fi } remove_dir() { # Delete dir rm -r "${1}" >/dev/null 2>&1 || echo -e " ${CROSS} Unable to remove ${1}" } get_binary_name() { local l_binary local machine machine=$(uname -m) local str="Detecting processor" printf " %b %s..." "${INFO}" "${str}" # If the machine is aarch64 (armv8) if [[ "${machine}" == "aarch64" ]]; then # If AArch64 is found (e.g., BCM2711 in Raspberry Pi 4) printf "%b %b Detected AArch64 (64 Bit ARM) architecture\\n" "${OVER}" "${TICK}" l_binary="pihole-FTL-arm64" elif [[ "${machine}" == "arm"* ]]; then # ARM 32 bit # Get supported processor from other binaries installed on the system # We cannot really rely on the output of $(uname -m) above as this may # return an incorrect architecture when buildx-compiling with QEMU local cpu_arch cpu_arch=$(readelf -A "$(command -v sh)" | grep Tag_CPU_arch | awk '{ print $2 }') # Get the revision from the CPU architecture local rev rev=$(echo "${cpu_arch}" | grep -o '[0-9]*') if [[ "${rev}" -eq 6 ]]; then # If ARMv6 is found (e.g., BCM2835 in Raspberry Pi 1 and Zero) printf "%b %b Detected ARMv6 architecture\\n" "${OVER}" "${TICK}" l_binary="pihole-FTL-armv6" elif [[ "${rev}" -ge 7 ]]; then # If ARMv7 or higher is found (e.g., BCM2836 in Raspberry PI 2 Mod. B) # This path is also used for ARMv8 when the OS is in 32bit mode # (e.g., BCM2837 in Raspberry Pi Model 3B, or BCM2711 in Raspberry Pi 4) printf "%b %b Detected ARMv7 (or newer) architecture (%s)\\n" "${OVER}" "${TICK}" "${cpu_arch}" l_binary="pihole-FTL-armv7" else # Otherwise, Pi-hole does not support this architecture printf "%b %b This processor architecture is not supported by Pi-hole (%s)\\n" "${OVER}" "${CROSS}" "${cpu_arch}" l_binary="" fi elif [[ "${machine}" == "x86_64" ]]; then # This gives the processor of packages dpkg installs (for example, "i386") local dpkgarch dpkgarch=$(dpkg --print-processor 2>/dev/null || dpkg --print-architecture 2>/dev/null) # Special case: This is a 32 bit OS, installed on a 64 bit machine # -> change machine processor to download the 32 bit executable # We only check this for Debian-based systems as this has been an issue # in the past (see https://github.com/pi-hole/pi-hole/pull/2004) if [[ "${dpkgarch}" == "i386" ]]; then printf "%b %b Detected 32bit (i686) architecture\\n" "${OVER}" "${TICK}" l_binary="pihole-FTL-386" else # 64bit OS printf "%b %b Detected x86_64 architecture\\n" "${OVER}" "${TICK}" l_binary="pihole-FTL-amd64" fi elif [[ "${machine}" == "riscv64" ]]; then printf "%b %b Detected riscv64 architecture\\n" "${OVER}" "${TICK}" l_binary="pihole-FTL-riscv64" else # Something else - we try to use 32bit executable and warn the user if [[ ! "${machine}" == "i686" ]]; then printf "%b %b %s...\\n" "${OVER}" "${CROSS}" "${str}" printf " %b %bNot able to detect architecture (unknown: %s), trying x86 (32bit) executable%b\\n" "${INFO}" "${COL_LIGHT_RED}" "${machine}" "${COL_NC}" printf " %b Contact Pi-hole Support if you experience issues (e.g: FTL not running)\\n" "${INFO}" else printf "%b %b Detected 32bit (i686) architecture\\n" "${OVER}" "${TICK}" fi l_binary="pihole-FTL-linux-386" fi # Returning a string value via echo echo ${l_binary} } FTLcheckUpdate() { # In the next section we check to see if FTL is already installed (in case of pihole -r). # If the installed version matches the latest version, then check the installed sha1sum of the binary vs the remote sha1sum. If they do not match, then download local ftlLoc ftlLoc=$(command -v pihole-FTL 2>/dev/null) local ftlBranch if [[ -f "/etc/pihole/ftlbranch" ]]; then ftlBranch=$("$TEMPLOG" # Delete templog, but allow for addressing via file handle # This lets us write to the log without having a temporary file on the drive, which # is meant to be a security measure so there is not a lingering file on the drive during the install process rm "$TEMPLOG" } copy_to_install_log() { # Copy the contents of file descriptor 3 into the install log # Since we use color codes such as '\e[1;33m', they should be removed sed 's/\[[0-9;]\{1,5\}m//g' "${installLogLoc}" chmod 644 "${installLogLoc}" chown pihole:pihole "${installLogLoc}" } migrate_dnsmasq_configs() { # Previously, Pi-hole created a number of files in /etc/dnsmasq.d # During migration, their content is copied into the new single source of # truth file /etc/pihole/pihole.toml and the old files are moved away to # avoid conflicts with other services on this system # Exit early if this is already Pi-hole v6.0 # We decide this on the presence of the file /etc/pihole/pihole.toml if [[ -f /etc/pihole/pihole.toml ]]; then return 0 fi # Create target directory /etc/pihole/migration_backup_v6 # and make it owned by pihole:pihole mkdir -p "${V6_CONF_MIGRATION_DIR}" chown pihole:pihole "${V6_CONF_MIGRATION_DIR}" # Move all conf files originally created by Pi-hole into this directory # - 01-pihole.conf # - 02-pihole-dhcp.conf # - 04-pihole-static-dhcp.conf # - 05-pihole-custom-cname.conf # - 06-rfc6761.conf mv /etc/dnsmasq.d/0{1,2,4,5}-pihole*.conf "${V6_CONF_MIGRATION_DIR}/" 2>/dev/null || true mv /etc/dnsmasq.d/06-rfc6761.conf "${V6_CONF_MIGRATION_DIR}/" 2>/dev/null || true } main() { ######## FIRST CHECK ######## # Must be root to install local str="Root user check" printf "\\n" # If the user's id is zero, if [[ "${EUID}" -eq 0 ]]; then # they are root and all is good printf " %b %s\\n" "${TICK}" "${str}" # Show the Pi-hole logo so people know it's genuine since the logo and name are trademarked show_ascii_berry make_temporary_log else # Otherwise, they do not have enough privileges, so let the user know printf " %b %s\\n" "${INFO}" "${str}" printf " %b %bScript called with non-root privileges%b\\n" "${INFO}" "${COL_LIGHT_RED}" "${COL_NC}" printf " The Pi-hole requires elevated privileges to install and run\\n" printf " Please check the installer for any concerns regarding this requirement\\n" printf " Make sure to download this script from a trusted source\\n\\n" printf " %b Sudo utility check" "${INFO}" # If the sudo command exists, try rerunning as admin if is_command sudo; then printf "%b %b Sudo utility check\\n" "${OVER}" "${TICK}" # when run via curl piping if [[ "$0" == "bash" ]]; then # Download the install script and run it with admin rights exec curl -sSL https://install.pi-hole.net | sudo bash "$@" else # when run via calling local bash script exec sudo bash "$0" "$@" fi exit $? else # Otherwise, tell the user they need to run the script as root, and bail printf "%b %b Sudo utility check\\n" "${OVER}" "${CROSS}" printf " %b Sudo is needed for the Web Interface to run pihole commands\\n\\n" "${INFO}" printf " %b %bPlease re-run this installer as root${COL_NC}\\n" "${INFO}" "${COL_LIGHT_RED}" exit 1 fi fi # Check if SELinux is Enforcing and exit before doing anything else checkSelinux # Check for supported package managers so that we may install dependencies package_manager_detect # Notify user of package availability notify_package_updates_available # Install packages necessary to perform os_check printf " %b Checking for / installing Required dependencies for OS Check...\\n" "${INFO}" install_dependent_packages "${OS_CHECK_COMMON_DEPS[@]}" "${OS_CHECK_DEPS[@]}" # Check that the installed OS is officially supported - display warning if not os_check # Check if there is a usable FTL binary available on this architecture - do # this early on as FTL is a hard dependency for Pi-hole local funcOutput funcOutput=$(get_binary_name) #Store output of get_binary_name here # Abort early if this processor is not supported (get_binary_name returns empty string) if [[ "${funcOutput}" == "" ]]; then printf " %b Upgrade/install aborted\\n" "${CROSS}" "${DISTRO_NAME}" exit 1 fi # Install packages used by this installation script printf " %b Checking for / installing Required dependencies for this install script...\\n" "${INFO}" install_dependent_packages "${INSTALLER_COMMON_DEPS[@]}" "${INSTALLER_DEPS[@]}" # if it's running unattended, if [[ "${runUnattended}" == true ]]; then printf " %b Performing unattended setup, no dialogs will be displayed\\n" "${INFO}" # Use the setup variables useUpdateVars=true # also disable debconf-apt-progress dialogs export DEBIAN_FRONTEND="noninteractive" else # If running attended, show the available options (repair/reconfigure) update_dialogs fi if [[ "${useUpdateVars}" == false ]]; then # Display welcome dialogs welcomeDialogs # Create directory for Pi-hole storage (/etc/pihole/) install -d -m 755 "${PI_HOLE_CONFIG_DIR}" # Determine available interfaces get_available_interfaces # Find interfaces and let the user choose one chooseInterface # find IPv4 and IPv6 information of the device collect_v4andv6_information # Decide what upstream DNS Servers to use setDNS # Give the user a choice of blocklists to include in their install. Or not. chooseBlocklists # Let the user decide if they want query logging enabled... setLogging # Let the user decide the FTL privacy level setPrivacyLevel else # Setup adlist file if not exists installDefaultBlocklists fi # Download or update the scripts by updating the appropriate git repos clone_or_update_repos # Install the Core dependencies local dep_install_list=("${PIHOLE_COMMON_DEPS[@]}" "${PIHOLE_DEPS[@]}") # Install packages used by the actual software printf " %b Checking for / installing Required dependencies for Pi-hole software...\\n" "${INFO}" install_dependent_packages "${dep_install_list[@]}" unset dep_install_list # Create the pihole user create_pihole_user # Download and install FTL local binary binary="pihole-FTL${funcOutput##*pihole-FTL}" #binary name will be the last line of the output of get_binary_name (it always begins with pihole-FTL) local theRest theRest="${funcOutput%pihole-FTL*}" # Print the rest of get_binary_name's output to display (cut out from first instance of "pihole-FTL") if ! FTLdetect "${binary}" "${theRest}"; then printf " %b FTL Engine not installed\\n" "${CROSS}" exit 1 fi # Install and log everything to a file installPihole | tee -a /proc/$$/fd/3 # Copy the temp log file into final log location for storage copy_to_install_log # Add password to web UI if there is none pw="" # If no password is set, if [[ $(pihole-FTL --config webserver.api.pwhash) == '""' ]]; then # generate a random password pw=$(tr -dc _A-Z-a-z-0-9 0)); then # display the password printf " %b Web Interface password: %b%s%b\\n" "${INFO}" "${COL_LIGHT_GREEN}" "${pw}" "${COL_NC}" printf " %b This can be changed using 'pihole -a -p'\\n\\n" "${INFO}" fi if [[ "${useUpdateVars}" == false ]]; then # If the Web interface was installed, printf " %b View the web interface at http://pi.hole:${WEBPORT}/admin or http://%s/admin\\n\\n" "${INFO}" "${IPV4_ADDRESS%/*}:${WEBPORT}" # Explain to the user how to use Pi-hole as their DNS server printf " %b You may now configure your devices to use the Pi-hole as their DNS server\\n" "${INFO}" [[ -n "${IPV4_ADDRESS%/*}" ]] && printf " %b Pi-hole DNS (IPv4): %s\\n" "${INFO}" "${IPV4_ADDRESS%/*}" [[ -n "${IPV6_ADDRESS}" ]] && printf " %b Pi-hole DNS (IPv6): %s\\n" "${INFO}" "${IPV6_ADDRESS}" printf " %b If you have not done so already, the above IP should be set to static.\\n" "${INFO}" INSTALL_TYPE="Installation" else INSTALL_TYPE="Update" fi # Display where the log file is printf "\\n %b The install log is located at: %s\\n" "${INFO}" "${installLogLoc}" printf " %b %b%s complete! %b\\n" "${TICK}" "${COL_LIGHT_GREEN}" "${INSTALL_TYPE}" "${COL_NC}" if [[ "${INSTALL_TYPE}" == "Update" ]]; then printf "\\n" "${PI_HOLE_BIN_DIR}"/pihole version fi } # allow to source this script without running it if [[ "${SKIP_INSTALL}" != true ]]; then main "$@" fi