diff --git a/OpenVPN-server:-IPv6.md b/OpenVPN-server:-IPv6.md
new file mode 100644
index 0000000..624c0c7
--- /dev/null
+++ b/OpenVPN-server:-IPv6.md
@@ -0,0 +1,31 @@
+Full article: https://github.com/pi-hole/pi-hole/wiki/Pi-hole---OpenVPN-server
+
+This optional section walks through providing IPv6 connectivity outside and inside the tunnel.
+
+### Optional: IPv6 outside the tunnel
+
+To connect to your server over ipv6 (ipv6 transport) use this on both sides, e.g.
+```
+proto udp6
+```
+
+### Optional: IPv6 inside the tunnel
+
+In this document, we'll assume you have the following from the OpenVPN server's viewpoint:
+
+- The OpenVPN server has an IPv6 IP of `2001:db8:0:abc::100/64` on its LAN interface
+- The following block is routed to the OpenVPN server host: `2001:db8:0:123::/64`
+
+**Note: This section is work in progress**
+
+Add the following to a functioning OpenVPN config:
+```
+server-ipv6 2001:db8:0:123::/64
+```
+
+Pushing routes over the tunnel works much like it does in IPv4, but you use `push "route-ipv6 NETWORK/CIDR"`.
+
+To redirect all Internet-bound traffic, use the current allocated public IP space like this:
+```
+push "route-ipv6 2000::/3"
+```
\ No newline at end of file