1
0
Fork 0
mirror of https://github.com/pivpn/pivpn.git synced 2024-12-24 13:50:16 +00:00

Revert "Merge test ()"

This reverts commit d691321b3e.
This commit is contained in:
4s3ti 2020-01-31 20:24:31 +01:00 committed by GitHub
parent d691321b3e
commit b8f89ab015
21 changed files with 507 additions and 692 deletions

View file

@ -24,12 +24,12 @@ PKG_INSTALL="${PKG_MANAGER} --yes --no-install-recommends install"
PKG_COUNT="${PKG_MANAGER} -s -o Debug::NoLocking=true upgrade | grep -c ^Inst || true" PKG_COUNT="${PKG_MANAGER} -s -o Debug::NoLocking=true upgrade | grep -c ^Inst || true"
# Dependencies that are required by the script, regardless of the VPN protocol chosen # Dependencies that are required by the script, regardless of the VPN protocol chosen
BASE_DEPS=(git tar wget curl grep dnsutils whiptail net-tools bsdmainutils) BASE_DEPS=(git tar wget grep dnsutils whiptail net-tools bsdmainutils)
# Dependencies that where actually installed by the script. For example if the script requires # Dependencies that where actually installed by the script. For example if the script requires
# grep and dnsutils but dnsutils is already installed, we save grep here. This way when uninstalling # grep and dnsutils but dnsutils is already installed, we save grep here. This way when uninstalling
# PiVPN we won't prompt to remove packages that may have been installed by the user for other reasons # PiVPN we won't prompt to remove packages that may have been installed by the user for other reasons
INSTALLED_PACKAGES=() TO_INSTALL=()
easyrsaVer="3.0.6" easyrsaVer="3.0.6"
easyrsaRel="https://github.com/OpenVPN/easy-rsa/releases/download/v${easyrsaVer}/EasyRSA-unix-v${easyrsaVer}.tgz" easyrsaRel="https://github.com/OpenVPN/easy-rsa/releases/download/v${easyrsaVer}/EasyRSA-unix-v${easyrsaVer}.tgz"
@ -59,6 +59,11 @@ c=$(( columns / 2 ))
r=$(( r < 20 ? 20 : r )) r=$(( r < 20 ? 20 : r ))
c=$(( c < 70 ? 70 : c )) c=$(( c < 70 ? 70 : c ))
# Find IP used to route to outside world
IPv4addr=$(ip route get 192.0.2.1 | awk '{print $7}')
IPv4gw=$(ip route get 192.0.2.1 | awk '{print $3}')
availableInterfaces=$(ip -o link | awk '/state UP/ {print $2}' | cut -d':' -f1 | cut -d'@' -f1)
######## SCRIPT ############ ######## SCRIPT ############
main(){ main(){
@ -190,7 +195,7 @@ main(){
fi fi
# Save installation setting to the final location # Save installation setting to the final location
echo "INSTALLED_PACKAGES=(${INSTALLED_PACKAGES[*]})" >> /tmp/setupVars.conf echo "TO_INSTALL=(${TO_INSTALL[*]})" >> /tmp/setupVars.conf
$SUDO cp /tmp/setupVars.conf "$setupVars" $SUDO cp /tmp/setupVars.conf "$setupVars"
installScripts installScripts
@ -230,7 +235,7 @@ askAboutExistingInstall(){
# distroCheck, maybeOSSupport, noOSSupport # distroCheck, maybeOSSupport, noOSSupport
distroCheck(){ distroCheck(){
# if lsb_release command is on their system # if lsb_release command is on their system
if command -v lsb_release > /dev/null; then if hash lsb_release 2>/dev/null; then
PLAT=$(lsb_release -si) PLAT=$(lsb_release -si)
OSCN=$(lsb_release -sc) OSCN=$(lsb_release -sc)
@ -330,7 +335,7 @@ spinner(){
local pid=$1 local pid=$1
local delay=0.50 local delay=0.50
local spinstr='/-\|' local spinstr='/-\|'
while ps a | awk '{print $1}' | grep -q "$pid"; do while ps a | awk '{print $1}' | grep "${pid}"; do
local temp=${spinstr#?} local temp=${spinstr#?}
printf " [%c] " "${spinstr}" printf " [%c] " "${spinstr}"
local spinstr=${temp}${spinstr%"$temp"} local spinstr=${temp}${spinstr%"$temp"}
@ -394,7 +399,7 @@ updatePackageCache(){
echo ":::" echo ":::"
echo -ne "::: ${PKG_MANAGER} update has not been run today. Running now...\\n" echo -ne "::: ${PKG_MANAGER} update has not been run today. Running now...\\n"
# shellcheck disable=SC2086 # shellcheck disable=SC2086
$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $! $SUDO ${UPDATE_PKG_CACHE} &> /dev/null
echo " done!" echo " done!"
fi fi
} }
@ -431,7 +436,7 @@ preconfigurePackages(){
# if ufw is enabled, configure that. # if ufw is enabled, configure that.
# running as root because sometimes the executable is not in the user's $PATH # running as root because sometimes the executable is not in the user's $PATH
if $SUDO bash -c 'command -v ufw' > /dev/null; then if $SUDO bash -c 'hash ufw' 2>/dev/null; then
if LANG=en_US.UTF-8 $SUDO ufw status | grep -q inactive; then if LANG=en_US.UTF-8 $SUDO ufw status | grep -q inactive; then
USING_UFW=0 USING_UFW=0
else else
@ -451,8 +456,6 @@ preconfigurePackages(){
} }
installDependentPackages(){ installDependentPackages(){
declare -a TO_INSTALL=()
# Install packages passed in via argument array # Install packages passed in via argument array
# No spinner - conflicts with set -e # No spinner - conflicts with set -e
declare -a argArray1=("${!1}") declare -a argArray1=("${!1}")
@ -460,37 +463,18 @@ installDependentPackages(){
for i in "${argArray1[@]}"; do for i in "${argArray1[@]}"; do
echo -n "::: Checking for $i..." echo -n "::: Checking for $i..."
if dpkg-query -W -f='${Status}' "${i}" 2>/dev/null | grep -q "ok installed"; then if dpkg-query -W -f='${Status}' "${i}" 2>/dev/null | grep -q "ok installed"; then
echo " already installed!" echo " installed!"
else else
echo " not installed!"
# Add this package to the list of packages in the argument array that need to be installed
TO_INSTALL+=("${i}") TO_INSTALL+=("${i}")
echo " not installed!"
fi fi
done done
if command -v debconf-apt-progress > /dev/null; then if command -v debconf-apt-progress &> /dev/null; then
# shellcheck disable=SC2086 # shellcheck disable=SC2086
$SUDO debconf-apt-progress -- ${PKG_INSTALL} "${TO_INSTALL[@]}" $SUDO debconf-apt-progress -- ${PKG_INSTALL} "${argArray1[@]}"
else else
# shellcheck disable=SC2086 ${PKG_INSTALL} "${argArray1[@]}"
$SUDO ${PKG_INSTALL} "${TO_INSTALL[@]}"
fi
local FAILED=0
for i in "${TO_INSTALL[@]}"; do
if dpkg-query -W -f='${Status}' "${i}" 2>/dev/null | grep -q "ok installed"; then
echo "::: Package $i successfully installed!"
# Add this package to the total list of packages that were actually installed by the script
INSTALLED_PACKAGES+=("${i}")
else
echo "::: Failed to install $i!"
((FAILED++))
fi
done
if [ "$FAILED" -gt 0 ]; then
exit 1
fi fi
} }
@ -523,9 +507,6 @@ local chooseInterfaceOptions
# Loop sentinel variable # Loop sentinel variable
local firstloop=1 local firstloop=1
# Find network interfaces whose state is UP, so as to skip virtual interfaces and the loopback interface
availableInterfaces=$(ip -o link | awk '/state UP/ {print $2}' | cut -d':' -f1 | cut -d'@' -f1)
if [ -z "$availableInterfaces" ]; then if [ -z "$availableInterfaces" ]; then
echo "::: Could not find any active network interface, exiting" echo "::: Could not find any active network interface, exiting"
exit 1 exit 1
@ -608,56 +589,39 @@ validIP(){
return $stat return $stat
} }
validIPAndNetmask(){
local ip=$1
local stat=1
ip="${ip/\//.}"
if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,2}$ ]]; then
OIFS=$IFS
IFS='.'
read -r -a ip <<< "$ip"
IFS=$OIFS
[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
&& ${ip[2]} -le 255 && ${ip[3]} -le 255 \
&& ${ip[4]} -le 32 ]]
stat=$?
fi
return $stat
}
getStaticIPv4Settings() { getStaticIPv4Settings() {
# Find the gateway IP used to route to outside world # Grab their current DNS Server
CurrentIPv4gw="$(ip -o route get 192.0.2.1 | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' | awk 'NR==2')" IPv4dns=$(grep nameserver /etc/resolv.conf | awk '{print $2}' | xargs)
# Find the IP address (and netmask) of the desidered interface
CurrentIPv4addr="$(ip -o -f inet address show dev "${IPv4dev}" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\/[0-9]{1,2}')"
# Grab their current DNS servers
IPv4dns=$(grep -v "^#" /etc/resolv.conf | grep -w nameserver | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}' | xargs)
if [ "${runUnattended}" = 'true' ]; then if [ "${runUnattended}" = 'true' ]; then
if [ -z "$dhcpReserv" ] || [ "$dhcpReserv" -ne 1 ]; then if [ -z "$dhcpReserv" ] || [ "$dhcpReserv" -ne 1 ]; then
local MISSING_STATIC_IPV4_SETTINGS=0 local INVALID_STATIC_IPV4_SETTINGS=0
if [ -z "$IPv4addr" ]; then if [ -z "$IPv4addr" ]; then
echo "::: Missing static IP address" echo "::: Missing static IP address"
((MISSING_STATIC_IPV4_SETTINGS++)) INVALID_STATIC_IPV4_SETTINGS=1
fi fi
if [ -z "$IPv4gw" ]; then if [ -z "$IPv4gw" ]; then
echo "::: Missing static IP gateway" echo "::: Missing static IP gateway"
((MISSING_STATIC_IPV4_SETTINGS++)) INVALID_STATIC_IPV4_SETTINGS=1
fi fi
if [ "$MISSING_STATIC_IPV4_SETTINGS" -eq 0 ]; then if [ "$INVALID_STATIC_IPV4_SETTINGS" -eq 1 ]; then
echo "::: Incomplete static IP settings"
exit 1
fi
# If both settings are not empty, check if they are valid and proceed if [ -z "$IPv4addr" ] && [ -z "$IPv4gw" ]; then
if validIPAndNetmask "${IPv4addr}"; then echo "::: No static IP settings, using current settings"
echo "::: Your static IPv4 address: ${IPv4addr}"
echo "::: Your static IPv4 gateway: ${IPv4gw}"
else
if validIP "${IPv4addr%/*}"; then
echo "::: Your static IPv4 address: ${IPv4addr}" echo "::: Your static IPv4 address: ${IPv4addr}"
else else
echo "::: ${IPv4addr} is not a valid IP address" echo "::: ${IPv4addr%/*} is not a valid IP address"
exit 1 exit 1
fi fi
@ -667,45 +631,26 @@ getStaticIPv4Settings() {
echo "::: ${IPv4gw} is not a valid IP address" echo "::: ${IPv4gw} is not a valid IP address"
exit 1 exit 1
fi fi
elif [ "$MISSING_STATIC_IPV4_SETTINGS" -eq 1 ]; then
# If either of the settings is missing, consider the input inconsistent
echo "::: Incomplete static IP settings"
exit 1
elif [ "$MISSING_STATIC_IPV4_SETTINGS" -eq 2 ]; then
# If both of the settings are missing, assume the user wants to use current settings
IPv4addr="${CurrentIPv4addr}"
IPv4gw="${CurrentIPv4gw}"
echo "::: No static IP settings, using current settings"
echo "::: Your static IPv4 address: ${IPv4addr}"
echo "::: Your static IPv4 gateway: ${IPv4gw}"
fi fi
else else
echo "::: Skipping setting static IP address" echo "::: Skipping setting static IP address"
fi fi
echo "dhcpReserv=${dhcpReserv}" >> /tmp/setupVars.conf echo "dhcpReserv=${dhcpReserv}" >> /tmp/setupVars.conf
echo "IPv4addr=${IPv4addr}" >> /tmp/setupVars.conf echo "IPv4addr=${IPv4addr%/*}" >> /tmp/setupVars.conf
echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf
return return
fi fi
local ipSettingsCorrect local ipSettingsCorrect
local IPv4AddrValid
local IPv4gwValid
# Some users reserve IP addresses on another DHCP Server or on their routers, # Some users reserve IP addresses on another DHCP Server or on their routers,
# Lets ask them if they want to make any changes to their interfaces. # Lets ask them if they want to make any changes to their interfaces.
if (whiptail --backtitle "Calibrating network interface" --title "DHCP Reservation" --yesno \
if (whiptail --backtitle "Calibrating network interface" --title "DHCP Reservation" --yesno --defaultno \
"Are you Using DHCP Reservation on your Router/DHCP Server? "Are you Using DHCP Reservation on your Router/DHCP Server?
These are your current Network Settings: These are your current Network Settings:
IP address: ${CurrentIPv4addr} IP address: ${IPv4addr}
Gateway: ${CurrentIPv4gw} Gateway: ${IPv4gw}
Yes: Keep using DHCP reservation Yes: Keep using DHCP reservation
No: Setup static IP address No: Setup static IP address
@ -713,20 +658,16 @@ Don't know what DHCP Reservation is? Answer No." ${r} ${c}); then
dhcpReserv=1 dhcpReserv=1
# shellcheck disable=SC2129 # shellcheck disable=SC2129
echo "dhcpReserv=${dhcpReserv}" >> /tmp/setupVars.conf echo "dhcpReserv=${dhcpReserv}" >> /tmp/setupVars.conf
# We don't really need to save them as we won't set a static IP but they might be useful for debugging echo "IPv4addr=${IPv4addr%/*}" >> /tmp/setupVars.conf
echo "IPv4addr=${CurrentIPv4addr}" >> /tmp/setupVars.conf echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf
echo "IPv4gw=${CurrentIPv4gw}" >> /tmp/setupVars.conf
else else
# Ask if the user wants to use DHCP settings as their static IP # Ask if the user wants to use DHCP settings as their static IP
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address? if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
IP address: ${IPv4addr}
Gateway: ${IPv4gw}" ${r} ${c}); then
IP address: ${CurrentIPv4addr} echo "IPv4addr=${IPv4addr%/*}" >> /tmp/setupVars.conf
Gateway: ${CurrentIPv4gw}" ${r} ${c}); then
IPv4addr=${CurrentIPv4addr}
IPv4gw=${CurrentIPv4gw}
echo "IPv4addr=${IPv4addr}" >> /tmp/setupVars.conf
echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict. # If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that. whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want. If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
@ -737,58 +678,36 @@ It is also possible to use a DHCP reservation, but if you are going to do that,
# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP) # Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
# Start a loop to let the user enter their information with the chance to go back and edit it if necessary # Start a loop to let the user enter their information with the chance to go back and edit it if necessary
until [[ ${ipSettingsCorrect} = True ]]; do until [[ ${ipSettingsCorrect} = True ]]; do
until [[ ${IPv4AddrValid} = True ]]; do
# Ask for the IPv4 address # Ask for the IPv4 address
if IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" ${r} ${c} "${CurrentIPv4addr}" 3>&1 1>&2 2>&3) ; then if IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" ${r} ${c} "${IPv4addr}" 3>&1 1>&2 2>&3) ; then
if validIPAndNetmask "${IPv4addr}"; then
echo "::: Your static IPv4 address: ${IPv4addr}" echo "::: Your static IPv4 address: ${IPv4addr}"
IPv4AddrValid=True
else
whiptail --msgbox --backtitle "Calibrating network interface" --title "IPv4 address" "You've entered an invalid IP address: ${IPv4addr}\\n\\nPlease enter an IP address in the CIDR notation, example: 192.168.23.211/24\\n\\nIf you are not sure, please just keep the default." ${r} ${c}
echo "::: Invalid IPv4 address: ${IPv4addr}"
IPv4AddrValid=False
fi
else
# Cancelling IPv4 settings window
echo "::: Cancel selected. Exiting..."
exit 1
fi
done
until [[ ${IPv4gwValid} = True ]]; do
# Ask for the gateway # Ask for the gateway
if IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" ${r} ${c} "${CurrentIPv4gw}" 3>&1 1>&2 2>&3) ; then if IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" ${r} ${c} "${IPv4gw}" 3>&1 1>&2 2>&3) ; then
if validIP "${IPv4gw}"; then
echo "::: Your static IPv4 gateway: ${IPv4gw}" echo "::: Your static IPv4 gateway: ${IPv4gw}"
IPv4gwValid=True
else
whiptail --msgbox --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" "You've entered an invalid gateway IP: ${IPv4gw}\\n\\nPlease enter the IP address of your gateway (router), example: 192.168.23.1\\n\\nIf you are not sure, please just keep the default." ${r} ${c}
echo "::: Invalid IPv4 gateway: ${IPv4gw}"
IPv4gwValid=False
fi
else
# Cancelling gateway settings window
echo "::: Cancel selected. Exiting..."
exit 1
fi
done
# Give the user a chance to review their settings before moving on # Give the user a chance to review their settings before moving on
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct? if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
IP address: ${IPv4addr} IP address: ${IPv4addr}
Gateway: ${IPv4gw}" ${r} ${c}); then Gateway: ${IPv4gw}" ${r} ${c}); then
# If the settings are correct, then we need to set the pivpnIP # If the settings are correct, then we need to set the pivpnIP
echo "IPv4addr=${IPv4addr}" >> /tmp/setupVars.conf echo "IPv4addr=${IPv4addr%/*}" >> /tmp/setupVars.conf
echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf
# After that's done, the loop ends and we move on # After that's done, the loop ends and we move on
ipSettingsCorrect=True ipSettingsCorrect=True
else else
# If the settings are wrong, the loop continues # If the settings are wrong, the loop continues
ipSettingsCorrect=False ipSettingsCorrect=False
IPv4AddrValid=False fi
IPv4gwValid=False else
# Cancelling gateway settings window
ipSettingsCorrect=False
echo "::: Cancel selected. Exiting..."
exit 1
fi
else
# Cancelling IPv4 settings window
ipSettingsCorrect=False
echo "::: Cancel selected. Exiting..."
exit 1
fi fi
done done
# End the if statement for DHCP vs. static # End the if statement for DHCP vs. static
@ -1045,29 +964,18 @@ askWhichVPN(){
installOpenVPN(){ installOpenVPN(){
local PIVPN_DEPS local PIVPN_DEPS
echo "::: Installing OpenVPN from Debian package... "
if [ "$PLAT" = "Debian" ] || [ "$PLAT" = "Ubuntu" ]; then if [ "$PLAT" = "Debian" ] || [ "$PLAT" = "Ubuntu" ]; then
echo "::: Adding OpenVPN repository... "
# gnupg is used to add the openvpn PGP key to the APT keyring # gnupg is used to add the openvpn PGP key to the APT keyring
PIVPN_DEPS=(gnupg) PIVPN_DEPS=(gnupg)
installDependentPackages PIVPN_DEPS[@] installDependentPackages PIVPN_DEPS[@]
# We will download the repository key regardless of whether the user
# has already enabled the openvpn repository or not, just to make sure
# we have the right key
echo "::: Adding repository key..."
wget -qO- https://swupdate.openvpn.net/repos/repo-public.gpg | $SUDO apt-key add - wget -qO- https://swupdate.openvpn.net/repos/repo-public.gpg | $SUDO apt-key add -
if ! grep -qR "deb http.\?://build.openvpn.net/debian/openvpn/stable.\? $OSCN main" /etc/apt/sources.list*; then
echo "::: Adding OpenVPN repository... "
echo "deb https://build.openvpn.net/debian/openvpn/stable $OSCN main" | $SUDO tee /etc/apt/sources.list.d/pivpn-openvpn-repo.list > /dev/null echo "deb https://build.openvpn.net/debian/openvpn/stable $OSCN main" | $SUDO tee /etc/apt/sources.list.d/pivpn-openvpn-repo.list > /dev/null
fi
echo "::: Updating package cache..."
# shellcheck disable=SC2086 # shellcheck disable=SC2086
$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $! $SUDO ${UPDATE_PKG_CACHE} &> /dev/null
fi fi
echo "::: Installing OpenVPN from Debian package... "
# grepcidr is used to redact IPs in the debug log whereas expect is used # grepcidr is used to redact IPs in the debug log whereas expect is used
# to feed easy-rsa with passwords # to feed easy-rsa with passwords
PIVPN_DEPS=(openvpn grepcidr expect) PIVPN_DEPS=(openvpn grepcidr expect)
@ -1075,8 +983,6 @@ installOpenVPN(){
} }
installWireGuard(){ installWireGuard(){
local PIVPN_DEPS
if [ "$PLAT" = "Raspbian" ]; then if [ "$PLAT" = "Raspbian" ]; then
# If the running kernel is older than the kernel from the repo, dkms will # If the running kernel is older than the kernel from the repo, dkms will
@ -1130,28 +1036,19 @@ installWireGuard(){
if [ "$(uname -m)" = "armv7l" ]; then if [ "$(uname -m)" = "armv7l" ]; then
echo "::: Installing WireGuard from Debian package... " echo "::: Installing WireGuard from Debian package... "
# dirmngr is used to download repository keys for the unstable repo # dirmngr is used to download repository keys, whereas qrencode is used to generate qrcodes
PIVPN_DEPS=(dirmngr) # from config file, for use with mobile clients
PIVPN_DEPS=(dirmngr qrencode)
installDependentPackages PIVPN_DEPS[@] installDependentPackages PIVPN_DEPS[@]
# Do not upgrade packages from the unstable repository except for wireguard
echo "::: Adding repository keys..."
$SUDO apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 04EE7237B7D453EC 648ACFD622F3D138
# This regular expression should match combinations like http[s]://mirror.example.com/debian[/] unstable main
if ! grep -qR 'deb http.\?://.*/debian.\? unstable main' /etc/apt/sources.list*; then
echo "::: Adding Debian repository... " echo "::: Adding Debian repository... "
echo "deb https://deb.debian.org/debian/ unstable main" | $SUDO tee /etc/apt/sources.list.d/pivpn-unstable.list > /dev/null echo "deb https://deb.debian.org/debian/ unstable main" | $SUDO tee /etc/apt/sources.list.d/pivpn-unstable.list > /dev/null
fi
# Do not upgrade packages from the unstable repository except for wireguard
printf 'Package: *\nPin: release a=unstable\nPin-Priority: 1\n\nPackage: wireguard wireguard-dkms wireguard-tools\nPin: release a=unstable\nPin-Priority: 500\n' | $SUDO tee /etc/apt/preferences.d/pivpn-limit-unstable > /dev/null printf 'Package: *\nPin: release a=unstable\nPin-Priority: 1\n\nPackage: wireguard wireguard-dkms wireguard-tools\nPin: release a=unstable\nPin-Priority: 500\n' | $SUDO tee /etc/apt/preferences.d/pivpn-limit-unstable > /dev/null
echo "::: Updating package cache..." $SUDO apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 04EE7237B7D453EC 648ACFD622F3D138
# shellcheck disable=SC2086 # shellcheck disable=SC2086
$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $! $SUDO ${UPDATE_PKG_CACHE} &> /dev/null
PIVPN_DEPS=(raspberrypi-kernel-headers wireguard wireguard-tools wireguard-dkms)
# qrencode is used to generate qrcodes from config file, for use with mobile clients
PIVPN_DEPS=(raspberrypi-kernel-headers wireguard wireguard-tools wireguard-dkms qrencode)
installDependentPackages PIVPN_DEPS[@] installDependentPackages PIVPN_DEPS[@]
elif [ "$(uname -m)" = "armv6l" ]; then elif [ "$(uname -m)" = "armv6l" ]; then
@ -1167,7 +1064,7 @@ installWireGuard(){
WG_TOOLS_SOURCE="https://git.zx2c4.com/wireguard-tools/snapshot/wireguard-tools-${WG_TOOLS_SNAPSHOT}.tar.xz" WG_TOOLS_SOURCE="https://git.zx2c4.com/wireguard-tools/snapshot/wireguard-tools-${WG_TOOLS_SNAPSHOT}.tar.xz"
echo "::: Downloading wireguard-tools source code... " echo "::: Downloading wireguard-tools source code... "
wget -qO- "${WG_TOOLS_SOURCE}" | $SUDO tar xJ --directory /usr/src wget -qO- "${WG_TOOLS_SOURCE}" | $SUDO tar Jxf - --directory /usr/src
echo "done!" echo "done!"
## || exits if cd fails. ## || exits if cd fails.
@ -1188,7 +1085,7 @@ installWireGuard(){
# files from the file system # files from the file system
echo "::: Installing WireGuard tools... " echo "::: Installing WireGuard tools... "
if $SUDO checkinstall --pkgname wireguard-tools --pkgversion "${WG_TOOLS_SNAPSHOT}" -y; then if $SUDO checkinstall --pkgname wireguard-tools --pkgversion "${WG_TOOLS_SNAPSHOT}" -y; then
INSTALLED_PACKAGES+=("wireguard-tools") TO_INSTALL+=("wireguard-tools")
echo "done!" echo "done!"
else else
echo "failed!" echo "failed!"
@ -1201,16 +1098,16 @@ installWireGuard(){
WG_MODULE_SOURCE="https://git.zx2c4.com/wireguard-linux-compat/snapshot/wireguard-linux-compat-${WG_MODULE_SNAPSHOT}.tar.xz" WG_MODULE_SOURCE="https://git.zx2c4.com/wireguard-linux-compat/snapshot/wireguard-linux-compat-${WG_MODULE_SNAPSHOT}.tar.xz"
echo "::: Downloading wireguard-linux-compat source code... " echo "::: Downloading wireguard-linux-compat source code... "
wget -qO- "${WG_MODULE_SOURCE}" | $SUDO tar xJ --directory /usr/src wget -qO- "${WG_MODULE_SOURCE}" | $SUDO tar Jxf - --directory /usr/src
echo "done!" echo "done!"
# Rename wireguard-linux-compat folder and move the source code to the parent folder # Rename wireguard-linux-compat folder and move the source code to the parent folder
# such that dkms picks up the module when referencing wireguard/"${WG_MODULE_SNAPSHOT}" # such that dkms picks up the module when referencing wireguard/"${WG_MODULE_SNAPSHOT}"
cd /usr/src && \ cd /usr/src && \
$SUDO mv wireguard-linux-compat-"${WG_MODULE_SNAPSHOT}" wireguard-"${WG_MODULE_SNAPSHOT}" && \ $SUDO mv wireguard-linux-compat-"${WG_MODULE_SNAPSHOT}" wireguard-"${WG_MODULE_SNAPSHOT}"
cd wireguard-"${WG_MODULE_SNAPSHOT}" && \ cd wireguard-"${WG_MODULE_SNAPSHOT}" && \
$SUDO mv src/* . && \ $SUDO mv src/* . && \
$SUDO rmdir src || exit 1 $SUDO rmdir src
echo "::: Adding WireGuard modules via DKMS... " echo "::: Adding WireGuard modules via DKMS... "
if $SUDO dkms add wireguard/"${WG_MODULE_SNAPSHOT}"; then if $SUDO dkms add wireguard/"${WG_MODULE_SNAPSHOT}"; then
@ -1232,7 +1129,7 @@ installWireGuard(){
echo "::: Installing WireGuard modules via DKMS... " echo "::: Installing WireGuard modules via DKMS... "
if $SUDO dkms install wireguard/"${WG_MODULE_SNAPSHOT}"; then if $SUDO dkms install wireguard/"${WG_MODULE_SNAPSHOT}"; then
INSTALLED_PACKAGES+=("wireguard-dkms") TO_INSTALL+=("wireguard-dkms")
echo "done!" echo "done!"
else else
echo "failed!" echo "failed!"
@ -1247,17 +1144,11 @@ installWireGuard(){
elif [ "$PLAT" = "Debian" ]; then elif [ "$PLAT" = "Debian" ]; then
echo "::: Installing WireGuard from Debian package... " echo "::: Installing WireGuard from Debian package... "
if ! grep -qR 'deb http.\?://.*/debian.\? unstable main' /etc/apt/sources.list*; then
echo "::: Adding Debian repository... " echo "::: Adding Debian repository... "
echo "deb https://deb.debian.org/debian/ unstable main" | $SUDO tee /etc/apt/sources.list.d/pivpn-unstable.list > /dev/null echo "deb https://deb.debian.org/debian/ unstable main" | $SUDO tee /etc/apt/sources.list.d/pivpn-unstable.list > /dev/null
fi
printf 'Package: *\nPin: release a=unstable\nPin-Priority: 90\n' | $SUDO tee /etc/apt/preferences.d/pivpn-limit-unstable > /dev/null printf 'Package: *\nPin: release a=unstable\nPin-Priority: 90\n' | $SUDO tee /etc/apt/preferences.d/pivpn-limit-unstable > /dev/null
echo "::: Updating package cache..."
# shellcheck disable=SC2086 # shellcheck disable=SC2086
$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $! $SUDO ${UPDATE_PKG_CACHE} &> /dev/null
PIVPN_DEPS=(linux-headers-amd64 qrencode wireguard wireguard-tools wireguard-dkms) PIVPN_DEPS=(linux-headers-amd64 qrencode wireguard wireguard-tools wireguard-dkms)
installDependentPackages PIVPN_DEPS[@] installDependentPackages PIVPN_DEPS[@]
@ -1265,11 +1156,7 @@ installWireGuard(){
echo "::: Installing WireGuard from PPA... " echo "::: Installing WireGuard from PPA... "
$SUDO add-apt-repository ppa:wireguard/wireguard -y $SUDO add-apt-repository ppa:wireguard/wireguard -y
$SUDO ${UPDATE_PKG_CACHE}
echo "::: Updating package cache..."
# shellcheck disable=SC2086
$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $!
PIVPN_DEPS=(qrencode wireguard wireguard-tools wireguard-dkms linux-headers-generic) PIVPN_DEPS=(qrencode wireguard wireguard-tools wireguard-dkms linux-headers-generic)
installDependentPackages PIVPN_DEPS[@] installDependentPackages PIVPN_DEPS[@]
@ -1415,10 +1302,11 @@ askClientDNS(){
fi fi
# Detect and offer to use Pi-hole # Detect and offer to use Pi-hole
if command -v pihole > /dev/null; then if command -v pihole &>/dev/null; then
if (whiptail --backtitle "Setup PiVPN" --title "Pi-hole" --yesno "We have detected a Pi-hole installation, do you want to use it as the DNS server for the VPN, so you get ad blocking on the go?" ${r} ${c}); then if (whiptail --backtitle "Setup PiVPN" --title "Pi-hole" --yesno "We have detected a Pi-hole installation, do you want to use it as the DNS server for the VPN, so you get ad blocking on the go?" ${r} ${c}); then
pivpnDNS1="$vpnGw" pivpnDNS1="$vpnGw"
echo "interface=$pivpnDEV" | $SUDO tee /etc/dnsmasq.d/02-pivpn.conf > /dev/null echo "interface=$pivpnDEV" | $SUDO tee /etc/dnsmasq.d/02-pivpn.conf > /dev/null
$SUDO pihole restartdns
echo "pivpnDNS1=${pivpnDNS1}" >> /tmp/setupVars.conf echo "pivpnDNS1=${pivpnDNS1}" >> /tmp/setupVars.conf
echo "pivpnDNS2=${pivpnDNS2}" >> /tmp/setupVars.conf echo "pivpnDNS2=${pivpnDNS2}" >> /tmp/setupVars.conf
return return
@ -1592,45 +1480,35 @@ askPublicIPOrDNS(){
return return
fi fi
local publicDNSCorrect METH=$(whiptail --title "Public IP or DNS" --radiolist "Will clients use a Public IP or DNS Name to connect to your server (press space to select)?" ${r} ${c} 2 \
local publicDNSValid
if METH=$(whiptail --title "Public IP or DNS" --radiolist "Will clients use a Public IP or DNS Name to connect to your server (press space to select)?" ${r} ${c} 2 \
"$IPv4pub" "Use this public IP" "ON" \ "$IPv4pub" "Use this public IP" "ON" \
"DNS Entry" "Use a public DNS" "OFF" 3>&1 1>&2 2>&3); then "DNS Entry" "Use a public DNS" "OFF" 3>&1 1>&2 2>&3)
if [ "$METH" = "$IPv4pub" ]; then exitstatus=$?
if [ $exitstatus != 0 ]; then
echo "::: Cancel selected. Exiting..."
exit 1
fi
if [ "$METH" == "$IPv4pub" ]; then
pivpnHOST="${IPv4pub}" pivpnHOST="${IPv4pub}"
else else
until [[ ${publicDNSCorrect} = True ]]; do until [[ $publicDNSCorrect = True ]]
do
until [[ ${publicDNSValid} = True ]]; do PUBLICDNS=$(whiptail --title "PiVPN Setup" --inputbox "What is the public DNS name of this Server?" ${r} ${c} 3>&1 1>&2 2>&3)
if PUBLICDNS=$(whiptail --title "PiVPN Setup" --inputbox "What is the public DNS name of this Server?" ${r} ${c} 3>&1 1>&2 2>&3); then exitstatus=$?
if validDomain "$PUBLICDNS"; then if [ $exitstatus != 0 ]; then
publicDNSValid=True echo "::: Cancel selected. Exiting..."
exit 1
fi
if (whiptail --backtitle "Confirm DNS Name" --title "Confirm DNS Name" --yesno "Is this correct?\\n\\n Public DNS Name: $PUBLICDNS" ${r} ${c}) then
publicDNSCorrect=True
pivpnHOST="${PUBLICDNS}" pivpnHOST="${PUBLICDNS}"
else
whiptail --msgbox --backtitle "PiVPN Setup" --title "Invalid DNS name" "This DNS name is invalid. Please try again.\\n\\n DNS name: $PUBLICDNS\\n" ${r} ${c}
publicDNSValid=False
fi
else
echo "::: Cancel selected. Exiting..."
exit 1
fi
done
if (whiptail --backtitle "PiVPN Setup" --title "Confirm DNS Name" --yesno "Is this correct?\\n\\n Public DNS Name: $PUBLICDNS" ${r} ${c}) then
publicDNSCorrect=True
else else
publicDNSCorrect=False publicDNSCorrect=False
publicDNSValid=False
fi fi
done done
fi fi
else
echo "::: Cancel selected. Exiting..."
exit 1
fi
echo "pivpnHOST=${pivpnHOST}" >> /tmp/setupVars.conf echo "pivpnHOST=${pivpnHOST}" >> /tmp/setupVars.conf
} }
@ -1669,21 +1547,17 @@ askEncryption(){
fi fi
fi fi
if [ -z "$USE_PREDEFINED_DH_PARAM" ]; then if [ -z "$DOWNLOAD_DH_PARAM" ] || [ "$DOWNLOAD_DH_PARAM" -ne 1 ]; then
USE_PREDEFINED_DH_PARAM=1 DOWNLOAD_DH_PARAM=0
echo "::: Pre-defined DH parameters will be used"
else
if [ "$USE_PREDEFINED_DH_PARAM" -eq 1 ]; then
echo "::: Pre-defined DH parameters will be used"
else
echo "::: DH parameters will be generated locally" echo "::: DH parameters will be generated locally"
fi else
echo "::: DH parameters will be downloaded from \"2 Ton Digital\""
fi fi
fi fi
echo "TWO_POINT_FOUR=${TWO_POINT_FOUR}" >> /tmp/setupVars.conf echo "TWO_POINT_FOUR=${TWO_POINT_FOUR}" >> /tmp/setupVars.conf
echo "pivpnENCRYPT=${pivpnENCRYPT}" >> /tmp/setupVars.conf echo "pivpnENCRYPT=${pivpnENCRYPT}" >> /tmp/setupVars.conf
echo "USE_PREDEFINED_DH_PARAM=${USE_PREDEFINED_DH_PARAM}" >> /tmp/setupVars.conf echo "DOWNLOAD_DH_PARAM=${DOWNLOAD_DH_PARAM}" >> /tmp/setupVars.conf
return return
fi fi
@ -1709,15 +1583,15 @@ askEncryption(){
exit 1 exit 1
fi fi
if ([ "$pivpnENCRYPT" -ge 2048 ] && whiptail --backtitle "Setup OpenVPN" --title "Generate Diffie-Hellman Parameters" --yesno "Generating DH parameters can take many hours on a Raspberry Pi. You can instead use Pre-defined DH parameters recommended by the Internet Engineering Task Force.\\n\\nMore information about those can be found here: https://wiki.mozilla.org/Security/Archive/Server_Side_TLS_4.0#Pre-defined_DHE_groups\\n\\nIf you want unique parameters, choose 'No' and new Diffie-Hellman parameters will be generated on your device." ${r} ${c}); then if ([ "$pivpnENCRYPT" -ge 3072 ] && whiptail --backtitle "Setup OpenVPN" --title "Download Diffie-Hellman Parameters" --yesno --defaultno "Download Diffie-Hellman parameters from a public DH parameter generation service?\\n\\nGenerating DH parameters for a $pivpnENCRYPT-bit key can take many hours on a Raspberry Pi. You can instead download DH parameters from \"2 Ton Digital\" that are generated at regular intervals as part of a public service. Downloaded DH parameters will be randomly selected from their database.\\nMore information about this service can be found here: https://2ton.com.au/safeprimes/\\n\\nIf you're paranoid, choose 'No' and Diffie-Hellman parameters will be generated on your device." ${r} ${c}); then
USE_PREDEFINED_DH_PARAM=1 DOWNLOAD_DH_PARAM=1
else else
USE_PREDEFINED_DH_PARAM=0 DOWNLOAD_DH_PARAM=0
fi fi
echo "TWO_POINT_FOUR=${TWO_POINT_FOUR}" >> /tmp/setupVars.conf echo "TWO_POINT_FOUR=${TWO_POINT_FOUR}" >> /tmp/setupVars.conf
echo "pivpnENCRYPT=${pivpnENCRYPT}" >> /tmp/setupVars.conf echo "pivpnENCRYPT=${pivpnENCRYPT}" >> /tmp/setupVars.conf
echo "USE_PREDEFINED_DH_PARAM=${USE_PREDEFINED_DH_PARAM}" >> /tmp/setupVars.conf echo "DOWNLOAD_DH_PARAM=${DOWNLOAD_DH_PARAM}" >> /tmp/setupVars.conf
} }
confOpenVPN(){ confOpenVPN(){
@ -1743,7 +1617,7 @@ confOpenVPN(){
fi fi
# Get easy-rsa # Get easy-rsa
wget -qO- "${easyrsaRel}" | $SUDO tar xz --directory /etc/openvpn wget -qO- "${easyrsaRel}" | $SUDO tar xz -C /etc/openvpn
$SUDO mv /etc/openvpn/EasyRSA-v${easyrsaVer} /etc/openvpn/easy-rsa $SUDO mv /etc/openvpn/EasyRSA-v${easyrsaVer} /etc/openvpn/easy-rsa
# fix ownership # fix ownership
$SUDO chown -R root:root /etc/openvpn/easy-rsa $SUDO chown -R root:root /etc/openvpn/easy-rsa
@ -1786,13 +1660,13 @@ set_var EASYRSA_ALGO ${pivpnCERT}" | $SUDO tee vars >/dev/null
${SUDOE} ./easyrsa --batch build-ca nopass ${SUDOE} ./easyrsa --batch build-ca nopass
printf "\\n::: CA Complete.\\n" printf "\\n::: CA Complete.\\n"
if [ "$pivpnCERT" = "rsa" ] && [ "$USE_PREDEFINED_DH_PARAM" -ne 1 ]; then if [ "$pivpnCERT" = "rsa" ]; then
if [ "${runUnattended}" = 'true' ]; then if [ "${runUnattended}" = 'true' ]; then
echo "::: The server key, Diffie-Hellman parameters, and HMAC key will now be generated." echo "::: The server key, Diffie-Hellman parameters, and HMAC key will now be generated."
else else
whiptail --msgbox --backtitle "Setup OpenVPN" --title "Server Information" "The server key, Diffie-Hellman parameters, and HMAC key will now be generated." ${r} ${c} whiptail --msgbox --backtitle "Setup OpenVPN" --title "Server Information" "The server key, Diffie-Hellman parameters, and HMAC key will now be generated." ${r} ${c}
fi fi
elif [ "$pivpnCERT" = "ec" ] || { [ "$pivpnCERT" = "rsa" ] && [ "$USE_PREDEFINED_DH_PARAM" -eq 1 ]; }; then elif [ "$pivpnCERT" = "ec" ]; then
if [ "${runUnattended}" = 'true' ]; then if [ "${runUnattended}" = 'true' ]; then
echo "::: The server key and HMAC key will now be generated." echo "::: The server key and HMAC key will now be generated."
else else
@ -1804,13 +1678,13 @@ set_var EASYRSA_ALGO ${pivpnCERT}" | $SUDO tee vars >/dev/null
EASYRSA_CERT_EXPIRE=3650 ${SUDOE} ./easyrsa build-server-full "${SERVER_NAME}" nopass EASYRSA_CERT_EXPIRE=3650 ${SUDOE} ./easyrsa build-server-full "${SERVER_NAME}" nopass
if [ "$pivpnCERT" = "rsa" ]; then if [ "$pivpnCERT" = "rsa" ]; then
if [ "${USE_PREDEFINED_DH_PARAM}" -eq 1 ]; then if [ ${DOWNLOAD_DH_PARAM} -eq 1 ]; then
# Use Diffie-Hellman parameters from RFC 7919 (FFDHE) # Downloading parameters
${SUDOE} install -m 644 "${pivpnFilesDir}"/files/etc/openvpn/easy-rsa/pki/ffdhe"${pivpnENCRYPT}".pem pki/dh"${pivpnENCRYPT}".pem ${SUDOE} curl -s "https://2ton.com.au/getprimes/random/dhparam/${pivpnENCRYPT}" -o "/etc/openvpn/easy-rsa/pki/dh${pivpnENCRYPT}.pem"
else else
# Generate Diffie-Hellman key exchange # Generate Diffie-Hellman key exchange
${SUDOE} ./easyrsa gen-dh ${SUDOE} ./easyrsa gen-dh
${SUDOE} mv pki/dh.pem pki/dh"${pivpnENCRYPT}".pem ${SUDOE} mv "pki/dh.pem" "pki/dh${pivpnENCRYPT}.pem"
fi fi
fi fi
@ -1826,7 +1700,7 @@ set_var EASYRSA_ALGO ${pivpnCERT}" | $SUDO tee vars >/dev/null
${SUDOE} chown "$debianOvpnUserGroup" /etc/openvpn/crl.pem ${SUDOE} chown "$debianOvpnUserGroup" /etc/openvpn/crl.pem
# Write config file for server using the template.txt file # Write config file for server using the template.txt file
$SUDO install -m 644 "$pivpnFilesDir"/files/etc/openvpn/server_config.txt /etc/openvpn/server.conf $SUDO cp $pivpnFilesDir/server_config.txt /etc/openvpn/server.conf
# Apply client DNS settings # Apply client DNS settings
${SUDOE} sed -i '0,/\(dhcp-option DNS \)/ s/\(dhcp-option DNS \).*/\1'${pivpnDNS1}'\"/' /etc/openvpn/server.conf ${SUDOE} sed -i '0,/\(dhcp-option DNS \)/ s/\(dhcp-option DNS \).*/\1'${pivpnDNS1}'\"/' /etc/openvpn/server.conf
@ -1873,7 +1747,7 @@ set_var EASYRSA_ALGO ${pivpnCERT}" | $SUDO tee vars >/dev/null
} }
confOVPN(){ confOVPN(){
$SUDO install -m 644 "$pivpnFilesDir"/files/etc/openvpn/easy-rsa/pki/Default.txt /etc/openvpn/easy-rsa/pki/Default.txt $SUDO cp $pivpnFilesDir/Default.txt /etc/openvpn/easy-rsa/pki/Default.txt
$SUDO sed -i 's/IPv4pub/'"$pivpnHOST"'/' /etc/openvpn/easy-rsa/pki/Default.txt $SUDO sed -i 's/IPv4pub/'"$pivpnHOST"'/' /etc/openvpn/easy-rsa/pki/Default.txt
@ -2077,10 +1951,6 @@ restartServices(){
fi fi
;; ;;
esac esac
if [ -f /etc/dnsmasq.d/02-pivpn.conf ]; then
$SUDO pihole restartdns
fi
} }
askUnattendedUpgrades(){ askUnattendedUpgrades(){
@ -2112,7 +1982,7 @@ askUnattendedUpgrades(){
confUnattendedUpgrades(){ confUnattendedUpgrades(){
local PIVPN_DEPS local PIVPN_DEPS
PIVPN_DEPS=(unattended-upgrades) PIVPN_DEPS+=(unattended-upgrades)
installDependentPackages PIVPN_DEPS[@] installDependentPackages PIVPN_DEPS[@]
aptConfDir="/etc/apt/apt.conf.d" aptConfDir="/etc/apt/apt.conf.d"
@ -2129,13 +1999,10 @@ confUnattendedUpgrades(){
# Fix Raspbian config # Fix Raspbian config
if [ "$PLAT" = "Raspbian" ]; then if [ "$PLAT" = "Raspbian" ]; then
wget -qO- "$UNATTUPG_CONFIG" | $SUDO tar xz --directory "${aptConfDir}" "unattended-upgrades-$UNATTUPG_RELEASE/data/50unattended-upgrades.Raspbian" --strip-components 2 wget -q -O "/tmp/${UNATTUPG_RELEASE}.tar.gz" "$UNATTUPG_CONFIG"
if test -s "${aptConfDir}/50unattended-upgrades.Raspbian"; then cd /tmp/ && $SUDO tar xzf "/tmp/${UNATTUPG_RELEASE}.tar.gz"
$SUDO mv "${aptConfDir}/50unattended-upgrades.Raspbian" "${aptConfDir}/50unattended-upgrades" $SUDO cp /tmp/"unattended-upgrades-$UNATTUPG_RELEASE/data/50unattended-upgrades.Raspbian" "${aptConfDir}/50unattended-upgrades"
else $SUDO rm -rf "/tmp/unattended-upgrades-$UNATTUPG_RELEASE"
echo "$0: ERR: Failed to download \"50unattended-upgrades.Raspbian\"."
exit 1
fi
fi fi
# Add the remaining settings for all other distributions # Add the remaining settings for all other distributions
@ -2166,10 +2033,13 @@ installScripts(){
$SUDO chmod 0755 /opt/pivpn $SUDO chmod 0755 /opt/pivpn
fi fi
$SUDO install -m 755 "$pivpnFilesDir"/scripts/*.sh -t /opt/pivpn $SUDO cp "$pivpnFilesDir"/scripts/*.sh /opt/pivpn/
$SUDO install -m 755 "$pivpnFilesDir"/scripts/"$VPN"/*.sh -t /opt/pivpn $SUDO cp "$pivpnFilesDir"/scripts/"$VPN"/*.sh /opt/pivpn/
$SUDO install -m 755 "$pivpnFilesDir"/scripts/"$VPN"/pivpn /usr/local/bin/pivpn $SUDO chmod 0755 /opt/pivpn/*.sh
$SUDO install -m 644 "$pivpnFilesDir"/scripts/"$VPN"/bash-completion /etc/bash_completion.d/pivpn $SUDO cp "$pivpnFilesDir"/scripts/"$VPN"/pivpn /usr/local/bin/pivpn
$SUDO chmod 0755 /usr/local/bin/pivpn
$SUDO cp "$pivpnFilesDir"/scripts/"$VPN"/bash-completion /etc/bash_completion.d/pivpn
$SUDO chmod 0644 /etc/bash_completion.d/pivpn
# shellcheck disable=SC1091 # shellcheck disable=SC1091
. /etc/bash_completion.d/pivpn . /etc/bash_completion.d/pivpn
echo " done." echo " done."

View file

@ -1,8 +0,0 @@
-----BEGIN DH PARAMETERS-----
MIIBCAKCAQEA//////////+t+FRYortKmq/cViAnPTzx2LnFg84tNpWp4TZBFGQz
+8yTnc4kmz75fS/jY2MMddj2gbICrsRhetPfHtXV/WVhJDP1H18GbtCFY2VVPe0a
87VXE15/V8k1mE8McODmi3fipona8+/och3xWKE2rec1MKzKT0g6eXq8CrGCsyT7
YdEIqUuyyOP7uWrat2DX9GgdT0Kj3jlN9K5W7edjcrsZCwenyO4KbXCeAvzhzffi
7MA0BM0oNC9hkXL+nOmFg/+OTxIy7vKBg8P+OxtMb61zO7X8vC7CIAXFjvGDfRaD
ssbzSibBsu/6iGtCOGEoXJf//////////wIBAg==
-----END DH PARAMETERS-----

View file

@ -1,11 +0,0 @@
-----BEGIN DH PARAMETERS-----
MIIBiAKCAYEA//////////+t+FRYortKmq/cViAnPTzx2LnFg84tNpWp4TZBFGQz
+8yTnc4kmz75fS/jY2MMddj2gbICrsRhetPfHtXV/WVhJDP1H18GbtCFY2VVPe0a
87VXE15/V8k1mE8McODmi3fipona8+/och3xWKE2rec1MKzKT0g6eXq8CrGCsyT7
YdEIqUuyyOP7uWrat2DX9GgdT0Kj3jlN9K5W7edjcrsZCwenyO4KbXCeAvzhzffi
7MA0BM0oNC9hkXL+nOmFg/+OTxIy7vKBg8P+OxtMb61zO7X8vC7CIAXFjvGDfRaD
ssbzSibBsu/6iGtCOGEfz9zeNVs7ZRkDW7w09N75nAI4YbRvydbmyQd62R0mkff3
7lmMsPrBhtkcrv4TCYUTknC0EwyTvEN5RPT9RFLi103TZPLiHnH1S/9croKrnJ32
nuhtK8UiNjoNq8Uhl5sN6todv5pC1cRITgq80Gv6U93vPBsg7j/VnXwl5B0rZsYu
N///////////AgEC
-----END DH PARAMETERS-----

View file

@ -1,13 +0,0 @@
-----BEGIN DH PARAMETERS-----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-----END DH PARAMETERS-----

View file

@ -1,16 +1,9 @@
#!/bin/bash #!/bin/bash
# shellcheck disable=SC1091
source /etc/pivpn/setupVars.conf
# shellcheck disable=SC1090
backupdir=pivpnbackup backupdir=pivpnbackup
date=$(date +%Y%m%d-%H%M%S) date=$(date +%Y%m%d-%H%M%S)
setupVars="/etc/pivpn/setupVars.conf"
if [ ! -f "${setupVars}" ]; then
echo "::: Missing setup vars file!"
exit 1
fi
# shellcheck disable=SC1090
source "${setupVars}"
checkbackupdir(){ checkbackupdir(){

View file

@ -91,7 +91,7 @@ do
NO_PASS="1" NO_PASS="1"
;; ;;
-b|--bitwarden) -b|--bitwarden)
if command -v bw > /dev/null; then if command -v bw &> /dev/null; then
BITWARDEN="2" BITWARDEN="2"
else else
echo "Bitwarden not found, please install bitwarden" echo "Bitwarden not found, please install bitwarden"

View file

@ -2,6 +2,7 @@
# This scripts runs as root # This scripts runs as root
setupVars="/etc/pivpn/setupVars.conf" setupVars="/etc/pivpn/setupVars.conf"
ERR=0
if [ ! -f "${setupVars}" ]; then if [ ! -f "${setupVars}" ]; then
echo "::: Missing setup vars file!" echo "::: Missing setup vars file!"
@ -16,6 +17,14 @@ echo -e "::::\t\t\e[4mLatest commit\e[0m\t\t ::::"
git --git-dir /etc/.pivpn/.git log -n 1 git --git-dir /etc/.pivpn/.git log -n 1
printf "=============================================\n" printf "=============================================\n"
echo -e "::::\t \e[4mInstallation settings\e[0m \t ::::" echo -e "::::\t \e[4mInstallation settings\e[0m \t ::::"
# Use the wildcard so setupVars.conf.update.bak from the previous install is not shown
for filename in /etc/pivpn/*; do
if [[ "$filename" != "/etc/pivpn/setupVars.conf"* ]]; then
echo "$filename -> $(cat "$filename")"
fi
done
printf "=============================================\n"
echo -e "::::\t\e[4msetupVars file shown below\e[0m\t ::::"
sed "s/$pivpnHOST/REDACTED/" < /etc/pivpn/setupVars.conf sed "s/$pivpnHOST/REDACTED/" < /etc/pivpn/setupVars.conf
printf "=============================================\n" printf "=============================================\n"
echo -e ":::: \e[4mServer configuration shown below\e[0m ::::" echo -e ":::: \e[4mServer configuration shown below\e[0m ::::"
@ -28,7 +37,152 @@ echo -e ":::: \t\e[4mRecursive list of files in\e[0m\t ::::\n::: \e[4m/etc/openv
ls -LR /etc/openvpn/easy-rsa/pki/ -Ireqs -Icerts_by_serial ls -LR /etc/openvpn/easy-rsa/pki/ -Ireqs -Icerts_by_serial
printf "=============================================\n" printf "=============================================\n"
echo -e "::::\t\t\e[4mSelf check\e[0m\t\t ::::" echo -e "::::\t\t\e[4mSelf check\e[0m\t\t ::::"
/opt/pivpn/self_check.sh
if [ "$(cat /proc/sys/net/ipv4/ip_forward)" -eq 1 ]; then
echo ":: [OK] IP forwarding is enabled"
else
ERR=1
read -r -p ":: [ERR] IP forwarding is not enabled, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
sed -i '/net.ipv4.ip_forward=1/s/^#//g' /etc/sysctl.conf
sysctl -p
echo "Done"
fi
fi
if [ "$USING_UFW" -eq 0 ]; then
if iptables -t nat -C POSTROUTING -s 10.8.0.0/24 -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule" &> /dev/null; then
echo ":: [OK] Iptables MASQUERADE rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables MASQUERADE rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -t nat -I POSTROUTING -s 10.8.0.0/24 -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
if [ "$INPUT_CHAIN_EDITED" -eq 1 ]; then
if iptables -C INPUT -i "$IPv4dev" -p "$pivpnPROTO" --dport "$pivpnPORT" -j ACCEPT -m comment --comment "${VPN}-input-rule" &> /dev/null; then
echo ":: [OK] Iptables INPUT rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables INPUT rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -I INPUT 1 -i "$IPv4dev" -p "$pivpnPROTO" --dport "$pivpnPORT" -j ACCEPT -m comment --comment "${VPN}-input-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
fi
if [ "$FORWARD_CHAIN_EDITED" -eq 1 ]; then
if iptables -C FORWARD -s 10.8.0.0/24 -i tun0 -o "$IPv4dev" -j ACCEPT -m comment --comment "${VPN}-forward-rule" &> /dev/null; then
echo ":: [OK] Iptables FORWARD rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables FORWARD rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -I FORWARD 1 -d 10.8.0.0/24 -i "$IPv4dev" -o tun0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -m comment --comment "${VPN}-forward-rule"
iptables -I FORWARD 2 -s 10.8.0.0/24 -i tun0 -o "$IPv4dev" -j ACCEPT -m comment --comment "${VPN}-forward-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
fi
else
if LANG="en_US.UTF-8" ufw status | grep -qw 'active'; then
echo ":: [OK] Ufw is enabled"
else
ERR=1
read -r -p ":: [ERR] Ufw is not enabled, try to enable now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw enable
fi
fi
if iptables -t nat -C POSTROUTING -s 10.8.0.0/24 -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule" &> /dev/null; then
echo ":: [OK] Iptables MASQUERADE rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables MASQUERADE rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
sed "/delete these required/i *nat\n:POSTROUTING ACCEPT [0:0]\n-I POSTROUTING -s 10.8.0.0/24 -o $IPv4dev -j MASQUERADE -m comment --comment ${VPN}-nat-rule\nCOMMIT\n" -i /etc/ufw/before.rules
ufw reload
echo "Done"
fi
fi
if iptables -C ufw-user-input -p "${pivpnPROTO}" --dport "${pivpnPORT}" -j ACCEPT &> /dev/null; then
echo ":: [OK] Ufw input rule set"
else
ERR=1
read -r -p ":: [ERR] Ufw input rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw insert 1 allow "$pivpnPORT"/"$pivpnPROTO"
ufw reload
echo "Done"
fi
fi
if iptables -C ufw-user-forward -i tun0 -o "${IPv4dev}" -s 10.8.0.0/24 -j ACCEPT &> /dev/null; then
echo ":: [OK] Ufw forwarding rule set"
else
ERR=1
read -r -p ":: [ERR] Ufw forwarding rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw route insert 1 allow in on tun0 from 10.8.0.0/24 out on "$IPv4dev" to any
ufw reload
echo "Done"
fi
fi
fi
if systemctl is-active -q openvpn; then
echo ":: [OK] OpenVPN is running"
else
ERR=1
read -r -p ":: [ERR] OpenVPN is not running, try to start now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl start openvpn
echo "Done"
fi
fi
if systemctl is-enabled -q openvpn; then
echo ":: [OK] OpenVPN is enabled (it will automatically start on reboot)"
else
ERR=1
read -r -p ":: [ERR] OpenVPN is not enabled, try to enable now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl enable openvpn
echo "Done"
fi
fi
# grep -w (whole word) is used so port 11940 won't match when looking for 1194
if netstat -uanpt | grep openvpn | grep -w "${pivpnPORT}" | grep -q "${pivpnPROTO}"; then
echo ":: [OK] OpenVPN is listening on port ${pivpnPORT}/${pivpnPROTO}"
else
ERR=1
read -r -p ":: [ERR] OpenVPN is not listening, try to restart now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl restart openvpn
echo "Done"
fi
fi
if [ "$ERR" -eq 1 ]; then
echo -e "[INFO] Run \e[1mpivpn -d\e[0m again to see if we detect issues"
fi
printf "=============================================\n" printf "=============================================\n"
echo -e ":::: \e[4mSnippet of the server log\e[0m ::::" echo -e ":::: \e[4mSnippet of the server log\e[0m ::::"
tail -20 /var/log/openvpn.log > /tmp/snippet tail -20 /var/log/openvpn.log > /tmp/snippet

View file

@ -1,170 +0,0 @@
#!/bin/bash
subnetClass="24"
setupVars="/etc/pivpn/setupVars.conf"
ERR=0
if [ ! -f "${setupVars}" ]; then
echo "::: Missing setup vars file!"
exit 1
fi
source "${setupVars}"
if [ "$VPN" = "wireguard" ]; then
pivpnPROTO="udp"
pivpnDEV="wg0"
pivpnNET="10.6.0.0"
VPN_SERVICE="wg-quick@wg0"
VPN_PRETTY_NAME="WireGuard"
elif [ "$VPN" = "openvpn" ]; then
pivpnDEV="tun0"
pivpnNET="10.8.0.0"
VPN_SERVICE="openvpn"
VPN_PRETTY_NAME="OpenVPN"
fi
if [ "$(</proc/sys/net/ipv4/ip_forward)" -eq 1 ]; then
echo ":: [OK] IP forwarding is enabled"
else
ERR=1
read -r -p ":: [ERR] IP forwarding is not enabled, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
sed -i '/net.ipv4.ip_forward=1/s/^#//g' /etc/sysctl.conf
sysctl -p
echo "Done"
fi
fi
if [ "$USING_UFW" -eq 0 ]; then
if iptables -t nat -C POSTROUTING -s "${pivpnNET}/${subnetClass}" -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule" &> /dev/null; then
echo ":: [OK] Iptables MASQUERADE rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables MASQUERADE rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -t nat -I POSTROUTING -s "${pivpnNET}/${subnetClass}" -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
if [ "$INPUT_CHAIN_EDITED" -eq 1 ]; then
if iptables -C INPUT -i "${IPv4dev}" -p "${pivpnPROTO}" --dport "${pivpnPORT}" -j ACCEPT -m comment --comment "${VPN}-input-rule" &> /dev/null; then
echo ":: [OK] Iptables INPUT rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables INPUT rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -I INPUT 1 -i "${IPv4dev}" -p "${pivpnPROTO}" --dport "${pivpnPORT}" -j ACCEPT -m comment --comment "${VPN}-input-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
fi
if [ "$FORWARD_CHAIN_EDITED" -eq 1 ]; then
if iptables -C FORWARD -s "${pivpnNET}/${subnetClass}" -i "${pivpnDEV}" -o "${IPv4dev}" -j ACCEPT -m comment --comment "${VPN}-forward-rule" &> /dev/null; then
echo ":: [OK] Iptables FORWARD rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables FORWARD rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -I FORWARD 1 -d "${pivpnNET}/${subnetClass}" -i "${IPv4dev}" -o "${pivpnDEV}" -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -m comment --comment "${VPN}-forward-rule"
iptables -I FORWARD 2 -s "${pivpnNET}/${subnetClass}" -i "${pivpnDEV}" -o "${IPv4dev}" -j ACCEPT -m comment --comment "${VPN}-forward-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
fi
else
if LANG="en_US.UTF-8" ufw status | grep -qw 'active'; then
echo ":: [OK] Ufw is enabled"
else
ERR=1
read -r -p ":: [ERR] Ufw is not enabled, try to enable now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw enable
fi
fi
if iptables -t nat -C POSTROUTING -s "${pivpnNET}/${subnetClass}" -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule" &> /dev/null; then
echo ":: [OK] Iptables MASQUERADE rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables MASQUERADE rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
sed "/delete these required/i *nat\n:POSTROUTING ACCEPT [0:0]\n-I POSTROUTING -s ${pivpnNET}/${subnetClass} -o ${IPv4dev} -j MASQUERADE -m comment --comment ${VPN}-nat-rule\nCOMMIT\n" -i /etc/ufw/before.rules
ufw reload
echo "Done"
fi
fi
if iptables -C ufw-user-input -p "${pivpnPROTO}" --dport "${pivpnPORT}" -j ACCEPT &> /dev/null; then
echo ":: [OK] Ufw input rule set"
else
ERR=1
read -r -p ":: [ERR] Ufw input rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw insert 1 allow "${pivpnPORT}"/"${pivpnPROTO}"
ufw reload
echo "Done"
fi
fi
if iptables -C ufw-user-forward -i "${pivpnDEV}" -o "${IPv4dev}" -s "${pivpnNET}/${subnetClass}" -j ACCEPT &> /dev/null; then
echo ":: [OK] Ufw forwarding rule set"
else
ERR=1
read -r -p ":: [ERR] Ufw forwarding rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw route insert 1 allow in on "${pivpnDEV}" from "${pivpnNET}/${subnetClass}" out on "${IPv4dev}" to any
ufw reload
echo "Done"
fi
fi
fi
if systemctl is-active -q "${VPN_SERVICE}"; then
echo ":: [OK] ${VPN_PRETTY_NAME} is running"
else
ERR=1
read -r -p ":: [ERR] ${VPN_PRETTY_NAME} is not running, try to start now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl start "${VPN_SERVICE}"
echo "Done"
fi
fi
if systemctl is-enabled -q "${VPN_SERVICE}"; then
echo ":: [OK] ${VPN_PRETTY_NAME} is enabled (it will automatically start on reboot)"
else
ERR=1
read -r -p ":: [ERR] ${VPN_PRETTY_NAME} is not enabled, try to enable now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl enable "${VPN_SERVICE}"
echo "Done"
fi
fi
# grep -w (whole word) is used so port 11940 won't match when looking for 1194
if netstat -antu | grep -wqE "${pivpnPROTO}.*${pivpnPORT}"; then
echo ":: [OK] ${VPN_PRETTY_NAME} is listening on port ${pivpnPORT}/${pivpnPROTO}"
else
ERR=1
read -r -p ":: [ERR] ${VPN_PRETTY_NAME} is not listening, try to restart now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl restart "${VPN_SERVICE}"
echo "Done"
fi
fi
if [ "$ERR" -eq 1 ]; then
echo -e "[INFO] Run \e[1mpivpn -d\e[0m again to see if we detect issues"
fi

View file

@ -5,7 +5,6 @@
### FIXME: use variables where appropriate, reduce magic numbers by 99.9%, at least. ### FIXME: use variables where appropriate, reduce magic numbers by 99.9%, at least.
PKG_MANAGER="apt-get" PKG_MANAGER="apt-get"
UPDATE_PKG_CACHE="${PKG_MANAGER} update"
subnetClass="24" subnetClass="24"
setupVars="/etc/pivpn/setupVars.conf" setupVars="/etc/pivpn/setupVars.conf"
@ -34,7 +33,7 @@ spinner(){
local pid=$1 local pid=$1
local delay=0.50 local delay=0.50
local spinstr='/-\|' local spinstr='/-\|'
while ps a | awk '{print $1}' | grep -q "$pid"; do while ps a | awk '{print $1}' | grep "$pid"; do
local temp=${spinstr#?} local temp=${spinstr#?}
printf " [%c] " "$spinstr" printf " [%c] " "$spinstr"
local spinstr=$temp${spinstr%"$temp"} local spinstr=$temp${spinstr%"$temp"}
@ -102,7 +101,7 @@ removeAll(){
# Purge dependencies # Purge dependencies
echo "::: Purge dependencies..." echo "::: Purge dependencies..."
for i in "${INSTALLED_PACKAGES[@]}"; do for i in "${TO_INSTALL[@]}"; do
while true; do while true; do
read -rp "::: Do you wish to remove $i from your system? [Y/n]: " yn read -rp "::: Do you wish to remove $i from your system? [Y/n]: " yn
case $yn in case $yn in
@ -114,11 +113,11 @@ removeAll(){
if [ "$PLAT" = "Debian" ] || { [ "$PLAT" = "Raspbian" ] && [ "$(uname -m)" = "armv7l" ]; }; then if [ "$PLAT" = "Debian" ] || { [ "$PLAT" = "Raspbian" ] && [ "$(uname -m)" = "armv7l" ]; }; then
rm -f /etc/apt/sources.list.d/pivpn-unstable.list rm -f /etc/apt/sources.list.d/pivpn-unstable.list
rm -f /etc/apt/preferences.d/pivpn-limit-unstable rm -f /etc/apt/preferences.d/pivpn-limit-unstable
$PKG_MANAGER update &> /dev/null
elif [ "$PLAT" = "Ubuntu" ]; then elif [ "$PLAT" = "Ubuntu" ]; then
add-apt-repository ppa:wireguard/wireguard -r -y add-apt-repository ppa:wireguard/wireguard -r -y
$PKG_MANAGER update &> /dev/null
fi fi
echo "::: Updating package cache..."
${UPDATE_PKG_CACHE} &> /dev/null & spinner $!
elif [ "${i}" = "wireguard-dkms" ]; then elif [ "${i}" = "wireguard-dkms" ]; then
@ -136,6 +135,12 @@ removeAll(){
rm -rf /usr/src/wireguard-tools-"${WG_TOOLS_SNAPSHOT}" rm -rf /usr/src/wireguard-tools-"${WG_TOOLS_SNAPSHOT}"
fi fi
elif [ "${i}" = "dirmngr" ]; then
# If dirmngr was installed, then we had previously installed wireguard on armv7l Raspbian
# so we remove the repository keys
apt-key remove E1CF20DDFFE4B89E802658F1E0B11894F66AEC98 80D15823B7FD1561F9F7BCDDDC30D7C23CBBABEE &> /dev/null
elif [ "${i}" = "unattended-upgrades" ]; then elif [ "${i}" = "unattended-upgrades" ]; then
### REALLY??? ### REALLY???
@ -147,8 +152,7 @@ removeAll(){
if [ "$PLAT" = "Debian" ] || [ "$PLAT" = "Ubuntu" ]; then if [ "$PLAT" = "Debian" ] || [ "$PLAT" = "Ubuntu" ]; then
rm -f /etc/apt/sources.list.d/pivpn-openvpn-repo.list rm -f /etc/apt/sources.list.d/pivpn-openvpn-repo.list
echo "::: Updating package cache..." $PKG_MANAGER update &> /dev/null
${UPDATE_PKG_CACHE} &> /dev/null & spinner $!
fi fi
deluser openvpn deluser openvpn
rm -f /etc/rsyslog.d/30-openvpn.conf rm -f /etc/rsyslog.d/30-openvpn.conf

View file

@ -15,17 +15,6 @@ fi
source "${setupVars}" source "${setupVars}"
scriptusage(){
echo "::: Updates PiVPN scripts"
echo ":::"
echo "::: Usage: pivpn <-up|update> [-t|--test]"
echo ":::"
echo "::: Commands:"
echo "::: [none] Updates from master branch"
echo "::: -t, test Updates from test branch"
echo "::: -h, help Show this usage dialog"
}
###Functions ###Functions
##Updates scripts ##Updates scripts
updatepivpnscripts(){ updatepivpnscripts(){
@ -79,6 +68,14 @@ cloneupdttest(){
git -C "$pivpnlocalpath" checkout master git -C "$pivpnlocalpath" checkout master
} }
scriptusage(){
echo -e "Updates pivpn scripts,
Usage:
pivpn update | updates from master branch
pivpn update -t or --test | updates from test branch"
}
## SCRIPT ## SCRIPT
if [[ $# -eq 0 ]]; then if [[ $# -eq 0 ]]; then
@ -86,15 +83,15 @@ if [[ $# -eq 0 ]]; then
else else
while true; do while true; do
case "$1" in case "$1" in
-t|test) -t|--test|test)
updatefromtest updatefromtest
exit 0 exit 0
;; ;;
-h|help) -h|--help|help)
scriptusage scriptusage
exit 0 exit 0
;; ;;
*) * )
updatepivpnscripts updatepivpnscripts
exit 0 exit 0
;; ;;

View file

@ -4,8 +4,8 @@ _pivpn()
COMPREPLY=() COMPREPLY=()
cur="${COMP_WORDS[COMP_CWORD]}" cur="${COMP_WORDS[COMP_CWORD]}"
prev="${COMP_WORDS[COMP_CWORD-1]}" prev="${COMP_WORDS[COMP_CWORD-1]}"
dashopts="-a -c -d -l -qr -r -h -u -up -wg -bk" dashopts="-a -c -d -l -qr -r -h -u -up -bk"
opts="add clients debug list qrcode remove help uninstall update wgupdate backup" opts="add clients debug list qrcode remove help uninstall update backup"
if [ "${#COMP_WORDS[@]}" -eq 2 ] if [ "${#COMP_WORDS[@]}" -eq 2 ]
then then
if [[ ${cur} == -* ]] ; then if [[ ${cur} == -* ]] ; then

View file

@ -10,11 +10,7 @@ hr(){
numfmt --to=iec-i --suffix=B "$1" numfmt --to=iec-i --suffix=B "$1"
} }
if DUMP="$(wg show wg0 dump)"; then DUMP="$(wg show wg0 dump | tail -n +2)"
DUMP="$(tail -n +2 <<< "$DUMP")"
else
exit 1
fi
printf "\e[1m::: Connected Clients List :::\e[0m\n" printf "\e[1m::: Connected Clients List :::\e[0m\n"
@ -32,7 +28,7 @@ while IFS= read -r LINE; do
CLIENT_NAME="$(grep "$PUBLIC_KEY" clients.txt | awk '{ print $1 }')" CLIENT_NAME="$(grep "$PUBLIC_KEY" clients.txt | awk '{ print $1 }')"
if [ "$LAST_SEEN" -ne 0 ]; then if [ "$LAST_SEEN" -ne 0 ]; then
printf "%s \t %s \t %s \t %s \t %s \t %s\n" "$CLIENT_NAME" "$REMOTE_IP" "${VIRTUAL_IP/\/32/}" "$(hr "$BYTES_RECEIVED")" "$(hr "$BYTES_SENT")" "$(date -d @"$LAST_SEEN" '+%b %d %Y - %T')" printf "%s \t %s \t %s \t %s \t %s \t %s\n" "$CLIENT_NAME" "$REMOTE_IP" "${VIRTUAL_IP/\/32/}" "$(hr "$BYTES_RECEIVED")" "$(hr "$BYTES_SENT")" "$(date -d @"$LAST_SEEN" '+%b %m %Y - %T')"
else else
printf "%s \t %s \t %s \t %s \t %s \t %s\n" "$CLIENT_NAME" "$REMOTE_IP" "${VIRTUAL_IP/\/32/}" "$(hr "$BYTES_RECEIVED")" "$(hr "$BYTES_SENT")" "(not yet)" printf "%s \t %s \t %s \t %s \t %s \t %s\n" "$CLIENT_NAME" "$REMOTE_IP" "${VIRTUAL_IP/\/32/}" "$(hr "$BYTES_RECEIVED")" "$(hr "$BYTES_SENT")" "(not yet)"
fi fi

View file

@ -2,13 +2,6 @@
setupVars="/etc/pivpn/setupVars.conf" setupVars="/etc/pivpn/setupVars.conf"
if [ ! -f "${setupVars}" ]; then
echo "::: Missing setup vars file!"
exit 1
fi
source "${setupVars}"
helpFunc(){ helpFunc(){
echo "::: Create a client conf profile" echo "::: Create a client conf profile"
echo ":::" echo ":::"
@ -46,6 +39,13 @@ while test $# -gt 0; do
shift shift
done done
if [ ! -f "${setupVars}" ]; then
echo "::: Missing setup vars file!"
exit 1
fi
source "${setupVars}"
# The home folder variable was sourced from the settings file. # The home folder variable was sourced from the settings file.
if [ ! -d "${install_home}/configs" ]; then if [ ! -d "${install_home}/configs" ]; then
mkdir "${install_home}/configs" mkdir "${install_home}/configs"

View file

@ -54,11 +54,6 @@ updateScripts(){
exit 0 exit 0
} }
updateWireGuard(){
$SUDO /opt/pivpn/wgUPDATE.sh
exit 0
}
backup(){ backup(){
$SUDO /opt/pivpn/backup.sh $SUDO /opt/pivpn/backup.sh
} }
@ -78,8 +73,7 @@ showHelp(){
echo "::: -h, help Show this help dialog" echo "::: -h, help Show this help dialog"
echo "::: -u, uninstall Uninstall pivpn from your system!" echo "::: -u, uninstall Uninstall pivpn from your system!"
echo "::: -up, update Updates PiVPN Scripts" echo "::: -up, update Updates PiVPN Scripts"
echo "::: -wg, wgupdate Updates WireGuard" echo "::: -bk, Backup Backup vpn configs and user profiles"
echo "::: -bk, backup Backup VPN configs and user profiles"
exit 0 exit 0
} }
@ -98,7 +92,6 @@ case "$1" in
"-h" | "help" ) showHelp;; "-h" | "help" ) showHelp;;
"-u" | "uninstall" ) uninstallServer;; "-u" | "uninstall" ) uninstallServer;;
"-up" | "update" ) updateScripts "$@" ;; "-up" | "update" ) updateScripts "$@" ;;
"-wg" | "wgupdate" ) updateWireGuard ;;
"-bk" | "backup" ) backup ;; "-bk" | "backup" ) backup ;;
* ) showHelp;; * ) showHelp;;
esac esac

View file

@ -10,6 +10,9 @@ fi
source "${setupVars}" source "${setupVars}"
EXAMPLE="$(head -1 /etc/wireguard/configs/clients.txt | awk '{print $1}')"
ERR=0
echo -e "::::\t\t\e[4mPiVPN debug\e[0m\t\t ::::" echo -e "::::\t\t\e[4mPiVPN debug\e[0m\t\t ::::"
printf "=============================================\n" printf "=============================================\n"
echo -e "::::\t\t\e[4mLatest commit\e[0m\t\t ::::" echo -e "::::\t\t\e[4mLatest commit\e[0m\t\t ::::"
@ -23,17 +26,16 @@ cd /etc/wireguard/keys
cp ../wg0.conf ../wg0.tmp cp ../wg0.conf ../wg0.tmp
# Replace every key in the server configuration with just its file name # Replace every key in the server configuration with just its file name
for k in *; do for k in *; do
sed "s#$(<"$k")#$k#" -i ../wg0.tmp sed "s#$(cat "$k")#$k#" -i ../wg0.tmp
done done
cat ../wg0.tmp cat ../wg0.tmp
rm ../wg0.tmp rm ../wg0.tmp
printf "=============================================\n" printf "=============================================\n"
echo -e ":::: \e[4mClient configuration shown below\e[0m ::::" echo -e ":::: \e[4mClient configuration shown below\e[0m ::::"
EXAMPLE="$(head -1 /etc/wireguard/configs/clients.txt | awk '{print $1}')"
if [ -n "$EXAMPLE" ]; then if [ -n "$EXAMPLE" ]; then
cp ../configs/"$EXAMPLE".conf ../configs/"$EXAMPLE".tmp cp ../configs/"$EXAMPLE".conf ../configs/"$EXAMPLE".tmp
for k in *; do for k in *; do
sed "s#$(<"$k")#$k#" -i ../configs/"$EXAMPLE".tmp sed "s#$(cat "$k")#$k#" -i ../configs/"$EXAMPLE".tmp
done done
sed "s/$pivpnHOST/REDACTED/" < ../configs/"$EXAMPLE".tmp sed "s/$pivpnHOST/REDACTED/" < ../configs/"$EXAMPLE".tmp
rm ../configs/"$EXAMPLE".tmp rm ../configs/"$EXAMPLE".tmp
@ -46,7 +48,151 @@ echo -e ":::: \t\e[4mRecursive list of files in\e[0m\t ::::\n::::\e\t[4m/etc/wir
ls -LR /etc/wireguard ls -LR /etc/wireguard
printf "=============================================\n" printf "=============================================\n"
echo -e "::::\t\t\e[4mSelf check\e[0m\t\t ::::" echo -e "::::\t\t\e[4mSelf check\e[0m\t\t ::::"
/opt/pivpn/self_check.sh
if [ "$(cat /proc/sys/net/ipv4/ip_forward)" -eq 1 ]; then
echo ":: [OK] IP forwarding is enabled"
else
ERR=1
read -r -p ":: [ERR] IP forwarding is not enabled, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
sed -i '/net.ipv4.ip_forward=1/s/^#//g' /etc/sysctl.conf
sysctl -p
echo "Done"
fi
fi
if [ "$USING_UFW" -eq 0 ]; then
if iptables -t nat -C POSTROUTING -s 10.6.0.0/24 -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule" &> /dev/null; then
echo ":: [OK] Iptables MASQUERADE rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables MASQUERADE rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -t nat -I POSTROUTING -s 10.6.0.0/24 -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
if [ "$INPUT_CHAIN_EDITED" -eq 1 ]; then
if iptables -C INPUT -i "$IPv4dev" -p udp --dport "$pivpnPORT" -j ACCEPT -m comment --comment "${VPN}-input-rule" &> /dev/null; then
echo ":: [OK] Iptables INPUT rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables INPUT rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -I INPUT 1 -i "$IPv4dev" -p udp --dport "$pivpnPORT" -j ACCEPT -m comment --comment "${VPN}-input-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
fi
if [ "$FORWARD_CHAIN_EDITED" -eq 1 ]; then
if iptables -C FORWARD -s 10.6.0.0/24 -i wg0 -o "$IPv4dev" -j ACCEPT -m comment --comment "${VPN}-forward-rule" &> /dev/null; then
echo ":: [OK] Iptables FORWARD rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables FORWARD rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
iptables -I FORWARD 1 -d 10.6.0.0/24 -i "$IPv4dev" -o wg0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -m comment --comment "${VPN}-forward-rule"
iptables -I FORWARD 2 -s 10.6.0.0/24 -i wg0 -o "$IPv4dev" -j ACCEPT -m comment --comment "${VPN}-forward-rule"
iptables-save > /etc/iptables/rules.v4
echo "Done"
fi
fi
fi
else
if LANG="en_US.UTF-8" ufw status | grep -qw 'active'; then
echo ":: [OK] Ufw is enabled"
else
ERR=1
read -r -p ":: [ERR] Ufw is not enabled, try to enable now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw enable
fi
fi
if iptables -t nat -C POSTROUTING -s 10.6.0.0/24 -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule" &> /dev/null; then
echo ":: [OK] Iptables MASQUERADE rule set"
else
ERR=1
read -r -p ":: [ERR] Iptables MASQUERADE rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
sed "/delete these required/i *nat\n:POSTROUTING ACCEPT [0:0]\n-I POSTROUTING -s 10.6.0.0/24 -o $IPv4dev -j MASQUERADE -m comment --comment ${VPN}-nat-rule\nCOMMIT\n" -i /etc/ufw/before.rules
ufw reload
echo "Done"
fi
fi
if iptables -C ufw-user-input -p udp --dport "${pivpnPORT}" -j ACCEPT &> /dev/null; then
echo ":: [OK] Ufw input rule set"
else
ERR=1
read -r -p ":: [ERR] Ufw input rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw insert 1 allow "$pivpnPORT"/udp
ufw reload
echo "Done"
fi
fi
if iptables -C ufw-user-forward -i wg0 -o "${IPv4dev}" -s 10.6.0.0/24 -j ACCEPT &> /dev/null; then
echo ":: [OK] Ufw forwarding rule set"
else
ERR=1
read -r -p ":: [ERR] Ufw forwarding rule is not set, attempt fix now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
ufw route insert 1 allow in on wg0 from 10.6.0.0/24 out on "$IPv4dev" to any
ufw reload
echo "Done"
fi
fi
fi
if systemctl is-active -q wg-quick@wg0; then
echo ":: [OK] WireGuard is running"
else
ERR=1
read -r -p ":: [ERR] WireGuard is not running, try to start now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl start wg-quick@wg0
echo "Done"
fi
fi
if systemctl is-enabled -q wg-quick@wg0; then
echo ":: [OK] WireGuard is enabled (it will automatically start on reboot)"
else
ERR=1
read -r -p ":: [ERR] WireGuard is not enabled, try to enable now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl enable wg-quick@wg0
echo "Done"
fi
fi
# grep -w (whole word) is used so port 11940 won't match when looking for 1194
if netstat -uanp | grep -w "${pivpnPORT}" | grep -q 'udp'; then
echo ":: [OK] WireGuard is listening on port ${pivpnPORT}/udp"
else
ERR=1
read -r -p ":: [ERR] WireGuard is not listening, try to restart now? [Y/n] " REPLY
if [[ ${REPLY} =~ ^[Yy]$ ]] || [[ -z ${REPLY} ]]; then
systemctl restart wg-quick@wg0
echo "Done"
fi
fi
if [ "$ERR" -eq 1 ]; then
echo -e "[INFO] Run \e[1mpivpn -d\e[0m again to see if we detect issues"
fi
printf "=============================================\n" printf "=============================================\n"
echo -e ":::: \e[1mWARNING\e[0m: This script should have automatically masked sensitive ::::" echo -e ":::: \e[1mWARNING\e[0m: This script should have automatically masked sensitive ::::"
echo -e ":::: information, however, still make sure that \e[4mPrivateKey\e[0m, \e[4mPublicKey\e[0m ::::" echo -e ":::: information, however, still make sure that \e[4mPrivateKey\e[0m, \e[4mPublicKey\e[0m ::::"

View file

@ -2,13 +2,6 @@
setupVars="/etc/pivpn/setupVars.conf" setupVars="/etc/pivpn/setupVars.conf"
if [ ! -f "${setupVars}" ]; then
echo "::: Missing setup vars file!"
exit 1
fi
source "${setupVars}"
helpFunc(){ helpFunc(){
echo "::: Remove a client conf profile" echo "::: Remove a client conf profile"
echo ":::" echo ":::"
@ -36,6 +29,13 @@ do
shift shift
done done
if [ ! -f "${setupVars}" ]; then
echo "::: Missing setup vars file!"
exit 1
fi
source "${setupVars}"
cd /etc/wireguard cd /etc/wireguard
if [ ! -s configs/clients.txt ]; then if [ ! -s configs/clients.txt ]; then
echo "::: There are no clients to remove" echo "::: There are no clients to remove"

View file

@ -1,132 +0,0 @@
#!/bin/bash
setupVars="/etc/pivpn/setupVars.conf"
if [ ! -f "${setupVars}" ]; then
echo "::: Missing setup vars file!"
exit 1
fi
source "${setupVars}"
if [ "$(uname -m)" != "armv6l" ]; then
echo "On your system, WireGuard updates via the package manager"
exit 0
fi
CURRENT_WG_TOOLS_SNAPSHOT="${WG_TOOLS_SNAPSHOT}"
WG_TOOLS_SNAPSHOT="$(curl -s https://build.wireguard.com/distros.json | jq -r '."upstream-tools"."version"')"
if dpkg --compare-versions "${WG_TOOLS_SNAPSHOT}" gt "${CURRENT_WG_TOOLS_SNAPSHOT}"; then
read -r -p "A new wireguard-tools update is available (${WG_TOOLS_SNAPSHOT}), install? [Y/n]: "
if [[ ${REPLY} =~ ^[Yy]$ ]]; then
echo "::: Upgrading wireguard-tools from ${CURRENT_WG_TOOLS_SNAPSHOT} to ${WG_TOOLS_SNAPSHOT}..."
WG_TOOLS_SOURCE="https://git.zx2c4.com/wireguard-tools/snapshot/wireguard-tools-${WG_TOOLS_SNAPSHOT}.tar.xz"
echo "::: Downloading wireguard-tools source code... "
wget -qO- "${WG_TOOLS_SOURCE}" | tar xJ --directory /usr/src
echo "done!"
## || exits if cd fails.
cd /usr/src/wireguard-tools-"${WG_TOOLS_SNAPSHOT}/src" || exit 1
# We install the userspace tools manually since DKMS only compiles and
# installs the kernel module
echo "::: Compiling WireGuard tools... "
if make; then
echo "done!"
else
echo "failed!"
exit 1
fi
# Use checkinstall to install userspace tools so if the user wants to uninstall
# PiVPN we can just do apt remove wireguard-tools, instead of manually removing
# files from the file system
echo "::: Installing WireGuard tools... "
if checkinstall --pkgname wireguard-tools --pkgversion "${WG_TOOLS_SNAPSHOT}" -y; then
echo "done!"
else
echo "failed!"
exit 1
fi
echo "::: Removing old source code ..."
rm -rf /usr/src/wireguard-tools-"${CURRENT_WG_TOOLS_SNAPSHOT}"
sed "s/WG_TOOLS_SNAPSHOT=${CURRENT_WG_TOOLS_SNAPSHOT}/WG_TOOLS_SNAPSHOT=${WG_TOOLS_SNAPSHOT}/" -i "${setupVars}"
echo "::: Upgrade completed!"
fi
else
echo "::: You are running the lastest version of wireguard-tools (${CURRENT_WG_TOOLS_SNAPSHOT})"
fi
CURRENT_WG_MODULE_SNAPSHOT="${WG_MODULE_SNAPSHOT}"
WG_MODULE_SNAPSHOT="$(curl -s https://build.wireguard.com/distros.json | jq -r '."upstream-linuxcompat"."version"')"
if dpkg --compare-versions "${WG_MODULE_SNAPSHOT}" gt "${CURRENT_WG_MODULE_SNAPSHOT}"; then
read -r -p "A new wireguard-dkms update is available (${WG_MODULE_SNAPSHOT}), install? [Y/n]: "
if [[ ${REPLY} =~ ^[Yy]$ ]]; then
echo "::: Upgrading wireguard-dkms from ${CURRENT_WG_MODULE_SNAPSHOT} to ${WG_MODULE_SNAPSHOT}..."
WG_MODULE_SOURCE="https://git.zx2c4.com/wireguard-linux-compat/snapshot/wireguard-linux-compat-${WG_MODULE_SNAPSHOT}.tar.xz"
echo "::: Downloading wireguard-linux-compat source code... "
wget -qO- "${WG_MODULE_SOURCE}" | tar xJ --directory /usr/src
echo "done!"
# Rename wireguard-linux-compat folder and move the source code to the parent folder
# such that dkms picks up the module when referencing wireguard/"${WG_MODULE_SNAPSHOT}"
cd /usr/src && \
mv wireguard-linux-compat-"${WG_MODULE_SNAPSHOT}" wireguard-"${WG_MODULE_SNAPSHOT}" && \
cd wireguard-"${WG_MODULE_SNAPSHOT}" && \
mv src/* . && \
rmdir src || exit 1
echo "::: Adding WireGuard module via DKMS... "
if dkms add wireguard/"${WG_MODULE_SNAPSHOT}"; then
echo "done!"
else
echo "failed!"
dkms remove wireguard/"${WG_MODULE_SNAPSHOT}" --all
exit 1
fi
echo "::: Compiling WireGuard module via DKMS... "
if dkms build wireguard/"${WG_MODULE_SNAPSHOT}"; then
echo "done!"
else
echo "failed!"
dkms remove wireguard/"${WG_MODULE_SNAPSHOT}" --all
exit 1
fi
echo "::: Installing WireGuard module via DKMS... "
if dkms install wireguard/"${WG_MODULE_SNAPSHOT}"; then
echo "done!"
else
echo "failed!"
dkms remove wireguard/"${WG_MODULE_SNAPSHOT}" --all
exit 1
fi
echo "::: Removing old kernel module and source code..."
if dkms remove wireguard/"${CURRENT_WG_MODULE_SNAPSHOT}" --all; then
rm -rf /usr/src/wireguard-"${CURRENT_WG_MODULE_SNAPSHOT}"
echo "done!"
else
echo "failed!"
exit 1
fi
sed "s/WG_TOOLS_SNAPSHOT=${CURRENT_WG_MODULE_SNAPSHOT}/WG_TOOLS_SNAPSHOT=${WG_MODULE_SNAPSHOT}/" -i "${setupVars}"
echo "::: Upgrade completed!"
fi
else
echo "::: You are running the lastest version of wireguard-dkms (${CURRENT_WG_MODULE_SNAPSHOT})"
fi

View file

@ -1,6 +1,4 @@
IPv4dev=eth0 IPv4dev=eth0
IPv4addr=192.168.23.211/24
IPv4gw=192.168.23.1
dhcpReserv=0 dhcpReserv=0
install_user=pi install_user=pi
VPN=openvpn VPN=openvpn
@ -12,5 +10,5 @@ pivpnHOST=pivpn.example.com
pivpnENCRYPT=256 pivpnENCRYPT=256
pivpnSEARCHDOMAIN=searchdomain.example.com pivpnSEARCHDOMAIN=searchdomain.example.com
TWO_POINT_FOUR=1 TWO_POINT_FOUR=1
USE_PREDEFINED_DH_PARAM=1 DOWNLOAD_DH_PARAM=0
UNATTUPG=1 UNATTUPG=1

View file

@ -1,6 +1,4 @@
IPv4dev=eth0 IPv4dev=eth0
IPv4addr=192.168.23.211/24
IPv4gw=192.168.23.1
dhcpReserv=0 dhcpReserv=0
install_user=pi install_user=pi
VPN=wireguard VPN=wireguard