Merge pull request #1 from 4s3ti/test

Merging test into Master, merge conflicts resolved.

ISSUE_TEMPLATE.md

@@ -64,4 +64,6 @@ For any output requested below, you may alternatively post it on http://pastebin
 ```
 
 ### Have you taken any steps towards solving your issue?
-     which?
+```
+  which?
+```

README.md

@@ -1,24 +1,15 @@
-PiVPN is once again maintained
-============
-
-james-lasersoft: 0-kaladin has assigned me as new admin for this project. I will do my best to keep things rolling into the future. I would like to thanks 0-kaladin for creating the most excellent project and I would also like to thank all of the future contributions we will receive from our zealous followers as they keep me on track.
-
-
------
-
-0-kaladin:  Sad times.  I love this project just have no time to properly give it the attention it deserves.  I'm still around so if anyone is willing to pick this up and keep it running just create an issue to let me know.  Thanks to all who've kept this going as current life changes don't allow time for hobbies.  Hopefully in the future... I wanted to get this to <pip install pivpn> at one point.
-
 About
 -----
 
 Visit the [PiVPN](http://pivpn.io) site for more information.
-This is a set of shell scripts that serve to easily turn your Raspberry Pi (TM)
+This is a set of shell scripts developed by **@0-kaladin** that serve to easily turn your Raspberry Pi (TM)
 into a VPN server using the free, open-source [OpenVPN](https://openvpn.net) software.
 
 Have you been looking for a good guide or tutorial for installing openvpn on a raspberry pi or ubuntu based server?  Run this script and you don't need a guide or tutorial, this will do it all for you, in a fraction of the time and with hardened security settings in place by default.  
 
 The master branch of this script installs and configures OpenVPN on Raspbian
-Jessie, Stretch, Devuan and has been tested on Ubuntu 14.04 and 16.04 running from an Amazon AWS image.  Personally, I'd recommend using the Stretch or Jessie Lite image on a raspberry pi in your home so you can VPN into your home from unsecure remote locations and safely use the internet.  However, the scripts do try to detect different distributions and make adjustments accordingly.  They should work on the majority of Ubuntu and Debian based distributions including those using UFW by default instead of raw iptables.  
+Jessie, Stretch, Devuan and has been tested on Ubuntu 14.04 and 16.04 running from an Amazon AWS image.
+We recommend using the Stretch or Jessie Lite image on a raspberry pi in your home so you can VPN into your home from unsecure remote locations and safely use the internet.  However, the scripts do try to detect different distributions and make adjustments accordingly.  They should work on the majority of Ubuntu and Debian based distributions including those using UFW by default instead of raw iptables.  
 
 This scripts primary mission in life is to allow a user to have a home VPN for as cost effective as possible and without being a technical wizard.  Hence the design of pivpn to work on a Raspberry Pi ($35) and then one command installer.  Followed by easy management of the VPN thereafter with the 'pivpn' command.  That being said...
 
@@ -54,11 +45,13 @@ curl -L https://install.pivpn.io | bash
 
 The script will first update your APT repositories, upgrade packages, and install OpenVPN,
 which will take some time.
-It will ask which encryption method you wish the guts of your server to use, 1024-bit, 2048-bit, or 4096-bit.
+It will ask which authentication method you wish the guts of your server to use, 1024-bit, 2048-bit, or 4096-bit.
 If you're unsure or don't have a convincing reason one way or the other I'd use 2048 today.  From the OpenVPN site:
 > For asymmetric keys, general wisdom is that 1024-bit keys are no longer sufficient to protect against well-equipped adversaries. Use of 2048-bit is a good minimum. It is wise to ensure all keys across your active PKI (including the CA root keypair) are using at least 2048-bit keys.
 
-> Up to 4096-bit is accepted by nearly all RSA systems (including OpenVPN,) but use of keys this large will dramatically increase generation time, TLS handshake delays, and CPU usage for TLS operations; the benefit beyond 2048-bit keys is small enough not to be of great use at the current time. It is often a larger benefit to consider lower validity times than more bits past 2048, but that is for you to decide.
+> Up to 4096-bit is accepted by nearly all RSA systems (including OpenVPN), but use of keys this large will dramatically increase generation time, TLS handshake delays, and CPU usage for TLS operations; the benefit beyond 2048-bit keys is small enough not to be of great use at the current time. It is often a larger benefit to consider lower validity times than more bits past 2048, but that is for you to decide.
+
+Luckily, OpenVPN 2.4 supports ECDSA certificates, which are based on Elliptic Curves, allowing much smaller keys while providing an equivalent security level (256 bit long, equivalent to 3072 bit RSA). For this reason, PiVPN now uses ECDSA certs if you choose to enable OpenVPN 2.4 features. If not, the usual RSA certificates are generated in case the user has clients running an older version of OpenVPN.
 
 After this, the script will go back to the command line as it builds the server's own
 certificate authority. The script will ask you if you'd like to change the certificate fields,
@@ -70,11 +63,16 @@ and have a working configuration at the end.
 Finally, the script will take some time to build the server's Diffie-Hellman key
 exchange. If you chose 1024-bit encryption, this will just take a few minutes, but if you
 chose 2048-bit, it will take much longer (anywhere from 40 minutes to several hours on a
-Model B+). The script will also make some changes to your system to allow it to forward
+Model B+).
+
+NOTE: Diffie-Hellman parameters are NOT generated if you choose not to use OpenVPN 2.4.
+
+The script will also make some changes to your system to allow it to forward
 internet traffic and allow VPN connections through the Pi's firewall. When the script
 informs you that it has finished configuring OpenVPN, it will ask if you want to reboot.  
 I have it where you do not need to reboot when done but it also can't hurt.
 
+
 Managing the PiVPN
 ----------------------
 
@@ -135,14 +133,16 @@ you want to remove OpenVPN without installing a fresh Raspbian image, just run
 Feedback & Support
 --------
 
-I am interested in making this script work for as many people as possible, so I
+PiVPN is purely community driven, and we are interested in making this script work for as many people as possible, we welcome any feedback on your experience.
-welcome any feedback on your experience. If you have problems using it, feel
+
-free to post an issue here on github.  I'll classify the issues the best I can
+for community support or general questions.
-to keep things sorted.
+Feel free to post on our subreddit <https://www.reddit.com/r/pivpn/>
+You can also join #pivpn <ircs://freenode/pivpn> on freenode in IRC 
+
+For code related issues, code contributions, feature requests, feel free to open an issue here at github.
+We will classify the issues the best we can to keep things sorted.
 
-[[DISCONTINUED APRIL 17]] You can also post on the [Google Space](https://goo.gl/spaces/kgp2Mcy5RDfZ5SSf8) I created for PiVPN, especially suited for general questions or discussions.
 
-You can also join #pivpn <ircs://freenode/pivpn> on freenode in IRC for community support or general questions.
 
 Related Projects
 --------
@@ -158,7 +158,7 @@ The foundation for all open-source VPN projects.
 Contributions
 -------------
 
-I'm also interested in improving this script, please check the current issues to see where you can help. If you have any
+Please check the current issues to see where you can help. If you have any
 feature ideas or requests, or are interested in adding your ideas to it,
 testing it on other platforms, please comment or leave a pull request.
 If you contribute often I can add you as a member of the PiVPN project.
@@ -175,4 +175,4 @@ sources.
 
 4. And as always the ever vigilant [EFF](https://www.eff.org/)
 
-I don't take donations at this time but if you want to show your appreciation to me, then contribute or leave feedback on suggestions or improvements.
+PiVPN is not taking donations at this time but if you want to show your appreciation, then contribute or leave feedback on suggestions or improvements.

auto_install/install.sh

@@ -9,12 +9,9 @@
 #
 # curl -L https://install.pivpn.io | bash
 # Make sure you have `curl` installed
-
 set -e
-######## VARIABLES #########
 
-tmpLog="/tmp/pivpn-install.log"
+######## VARIABLES #########
-instalLogLoc="/etc/pivpn/install.log"
 setupVars=/etc/pivpn/setupVars.conf
 useUpdateVars=false
 
@@ -33,7 +30,8 @@ easyrsaVer="3.0.6"
 easyrsaRel="https://github.com/OpenVPN/easy-rsa/releases/download/v${easyrsaVer}/EasyRSA-unix-v${easyrsaVer}.tgz"
 
 # Raspbian's unattended-upgrades package downloads Debian's config, so this is the link for the proper config 
-UNATTUPG_CONFIG="https://github.com/mvo5/unattended-upgrades/archive/1.4.tar.gz"
+UNATTUPG_RELEASE="1.9"
+UNATTUPG_CONFIG="https://github.com/mvo5/unattended-upgrades/archive/${UNATTUPG_RELEASE}.tar.gz"
 
 # Find the rows and columns. Will default to 80x24 if it can not be detected.
 screen_size=$(stty size 2>/dev/null || echo 24 80)
@@ -380,6 +378,18 @@ function valid_ip()
     return $stat
 }
 
+#Call this function to use a regex to check user input for a valid custom domain
+function valid_domain()
+{
+  local domain=$1
+  local stat=1
+
+  if [[ $domain =~ ^[a-zA-Z0-9][a-zA-Z0-9-]{1,61}\.[a-zA-Z]{2,}$ ]]; then
+    stat=$?
+  fi
+  return $stat
+}
+
 installScripts() {
     # Install the scripts from /etc/.pivpn to their various locations
     $SUDO echo ":::"
@@ -395,8 +405,7 @@ installScripts() {
     $SUDO cp /etc/.pivpn/scripts/removeOVPN.sh /opt/pivpn/removeOVPN.sh
     $SUDO cp /etc/.pivpn/scripts/uninstall.sh /opt/pivpn/uninstall.sh
     $SUDO cp /etc/.pivpn/scripts/pivpnDebug.sh /opt/pivpn/pivpnDebug.sh
-    $SUDO cp /etc/.pivpn/scripts/fix_iptables.sh /opt/pivpn/fix_iptables.sh
+    $SUDO chmod 0755 /opt/pivpn/{makeOVPN,clientStat,listOVPN,removeOVPN,uninstall,pivpnDebug}.sh
-    $SUDO chmod 0755 /opt/pivpn/{makeOVPN,clientStat,listOVPN,removeOVPN,uninstall,pivpnDebug,fix_iptables}.sh
     $SUDO cp /etc/.pivpn/pivpn /usr/local/bin/pivpn
     $SUDO chmod 0755 /usr/local/bin/pivpn
     $SUDO cp /etc/.pivpn/scripts/bash-completion /etc/bash_completion.d/pivpn
@@ -473,14 +482,13 @@ install_dependent_packages() {
     echo iptables-persistent iptables-persistent/autosave_v4 boolean true | $SUDO debconf-set-selections
     echo iptables-persistent iptables-persistent/autosave_v6 boolean false | $SUDO debconf-set-selections
 
-    if command -v debconf-apt-progress &> /dev/null; then
+    # Add support for https repositories if there are any that use it otherwise the installation will silently fail
+    if grep -q https /etc/apt/sources.list; then
+        PIVPN_DEPS+=("apt-transport-https")
+    fi
 
-        # Use appropriate argument if the package manager uses https otherwise the installation will silently fail
+    if command -v debconf-apt-progress &> /dev/null; then
-        if grep -q https /etc/apt/sources.list; then
+        $SUDO debconf-apt-progress -- ${PKG_INSTALL} "${argArray1[@]}"
-            $SUDO debconf-apt-progress -- ${PKG_INSTALL} -y apt-transport-https "${argArray1[@]}"
-        else
-            $SUDO debconf-apt-progress -- ${PKG_INSTALL} "${argArray1[@]}"
-        fi
     else
         for i in "${argArray1[@]}"; do
             echo -n ":::    Checking for $i..."
@@ -537,7 +545,7 @@ make_repo() {
     # Remove the non-repos interface and clone the interface
     echo -n ":::    Cloning $2 into $1..."
     $SUDO rm -rf "${1}"
-    $SUDO git clone -q "${2}" "${1}" > /dev/null & spinner $!
+    $SUDO git clone -q --depth 1 --no-single-branch "${2}" "${1}" > /dev/null & spinner $!
     if [ -z "${TESTING+x}" ]; then
         :
     else
@@ -552,9 +560,9 @@ update_repo() {
     else
         # Pull the latest commits
         echo -n ":::     Updating repo in $1..."
+        $SUDO rm -rf "${1}"
+        $SUDO git clone -q --depth 1 --no-single-branch "${2}" "${1}" > /dev/null & spinner $!
         cd "${1}" || exit 1
-        $SUDO git stash -q > /dev/null & spinner $!
-        $SUDO git pull -q > /dev/null & spinner $!
         if [ -z "${TESTING+x}" ]; then
             :
         else
@@ -702,6 +710,40 @@ setClientDNS() {
     fi
 }
 
+#This procedure allows a user to specify a custom search domain if they have one.
+setCustomDomain() {
+  DomainSettingsCorrect=False
+
+  if (whiptail --backtitle "Custom Search Domain" --title "Custom Search Domain" --yesno "Would you like to add a custom search domain? \n (This is only for advanced users who have their own domain)\n" ${r} ${c}); then
+
+    until [[ $DomainSettingsCorrect = True ]]
+    do
+      if CUSTOMDomain=$(whiptail --inputbox "Enter Custom Domain\nFormat: mydomain.com" ${r} ${c} --title "Custom Domain" 3>&1 1>&2 2>&3); then
+          if valid_domain "$CUSTOMDomain"; then
+            if (whiptail --backtitle "Custom Search Domain" --title "Custom Search Domain" --yesno "Are these settings correct?\n    Custom Search Domain: $CUSTOMDomain" ${r} ${c}); then
+                DomainSettingsCorrect=True
+
+                $SUDO sed -i '0,/\(.*dhcp-option.*\)/s//\push "dhcp-option DOMAIN '${CUSTOMDomain}'" \n&/' /etc/openvpn/server.conf
+
+            else
+                # If the settings are wrong, the loop continues
+                DomainSettingsCorrect=False
+            fi
+          else
+            whiptail --msgbox --backtitle "Invalid Domain" --title "Invalid Domain" "Domain is invalid. Please try again.\n\n    DOMAIN:   $CUSTOMDomain\n" ${r} ${c}
+            DomainSettingsCorrect=False
+          fi
+      else
+        echo "::: Cancel selected. Exiting..."
+        exit 1
+      fi
+    done
+
+  else
+    echo sleep 0.1
+  fi
+}
+
 confOpenVPN() {
     # Generate a random, alphanumeric identifier of 16 characters for this server so that we can use verify-x509-name later that is unique for this server installation. Source: Earthgecko (https://gist.github.com/earthgecko/3089509)
     NEW_UUID=$(cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 16 | head -n 1)
@@ -729,20 +771,20 @@ confOpenVPN() {
 
         if [[ ${APPLY_TWO_POINT_FOUR} == false ]]; then
 
-            ENCRYPT=$(whiptail --backtitle "Setup OpenVPN" --title "RSA encryption strength" --radiolist \
+            ENCRYPT=$(whiptail --backtitle "Setup OpenVPN" --title "RSA certificate size" --radiolist \
-            "Choose your desired level of encryption (press space to select):\n   This is an encryption key that will be generated on your system.  The larger the key, the more time this will take.  For most applications, it is recommended to use 2048 bits.  If you are testing, you can use 1024 bits to speed things up, but do not use this for normal use!  If you are paranoid about ... things... then grab a cup of joe and pick 4096 bits." ${r} ${c} 3 \
+            "Choose the desired size of your certificate (press space to select):\n   This is a certificate that will be generated on your system.  The larger the certificate, the more time this will take.  For most applications, it is recommended to use 2048 bits.  If you are testing, you can use 1024 bits to speed things up, but do not use this for normal use!  If you are paranoid about ... things... then grab a cup of joe and pick 4096 bits." ${r} ${c} 3 \
-            "1024" "Use 1024-bit encryption (testing only)" OFF \
+            "1024" "Use a 1024-bit certificate (testing only)" OFF \
-            "2048" "Use 2048-bit encryption (recommended level)" ON \
+            "2048" "Use a 2048-bit certificate (recommended level)" ON \
-            "4096" "Use 4096-bit encryption (paranoid level)" OFF 3>&1 1>&2 2>&3)
+            "4096" "Use a 4096-bit certificate (paranoid level)" OFF 3>&1 1>&2 2>&3)
 
         else
 
             declare -A ECDSA_MAP=(["256"]="prime256v1" ["384"]="secp384r1" ["521"]="secp521r1")
-            ENCRYPT=$(whiptail --backtitle "Setup OpenVPN" --title "ECDSA encryption strength" --radiolist \
+            ENCRYPT=$(whiptail --backtitle "Setup OpenVPN" --title "ECDSA certificate size" --radiolist \
-            "Choose your desired level of encryption (press space to select):\n   This is an encryption key that will be generated on your system.  The larger the key, the more time this will take.  For most applications, it is recommended to use 256 bits.  You can increase the number of bits if you care about, however, consider that 256 bits are already as secure as 3072 bit RSA." ${r} ${c} 3 \
+            "Choose the desired size of your certificate (press space to select):\n   This is an certificate that will be generated on your system.  The larger the certificate, the more time this will take.  For most applications, it is recommended to use 256 bits.  You can increase the number of bits if you care about, however, consider that 256 bits are already as secure as 3072 bit RSA." ${r} ${c} 3 \
-            "256" "Use 256-bit encryption (recommended level)" ON \
+            "256" "Use a 256-bit certificate (recommended level)" ON \
-            "384" "Use 384-bit encryption" OFF \
+            "384" "Use a 384-bit certificate" OFF \
-            "521" "Use 521-bit encryption (paranoid level)" OFF 3>&1 1>&2 2>&3)
+            "521" "Use a 521-bit certificate (paranoid level)" OFF 3>&1 1>&2 2>&3)
 
         fi
 
@@ -758,7 +800,8 @@ confOpenVPN() {
         $SUDO rm -rf /etc/openvpn/easy-rsa/
     fi
 
-    # Get the PiVPN easy-rsa
+
+    # Get easy-rsa
     wget -q -O - "${easyrsaRel}" | $SUDO tar xz -C /etc/openvpn && $SUDO mv /etc/openvpn/EasyRSA-v${easyrsaVer} /etc/openvpn/easy-rsa
     # fix ownership
     $SUDO chown -R root:root /etc/openvpn/easy-rsa
@@ -799,7 +842,7 @@ EOF
 
     if [[ ${useUpdateVars} == false ]]; then
         if [[ ${APPLY_TWO_POINT_FOUR} == false ]]; then
-            whiptail --msgbox --backtitle "Setup OpenVPN" --title "Server Information" "The server key, Diffie-Hellman key, and HMAC key will now be generated." ${r} ${c}
+            whiptail --msgbox --backtitle "Setup OpenVPN" --title "Server Information" "The server key, Diffie-Hellman parameters, and HMAC key will now be generated." ${r} ${c}
         fi
     fi
 
@@ -886,8 +929,8 @@ EOT
             # Fix Raspbian config
             if [[ $PLAT == "Raspbian" ]]; then
                 wget -q -O - "$UNATTUPG_CONFIG" | $SUDO tar xz
-                $SUDO cp unattended-upgrades-1.4/data/50unattended-upgrades.Raspbian 50unattended-upgrades
+                $SUDO cp "unattended-upgrades-$UNATTUPG_RELEASE/data/50unattended-upgrades.Raspbian" 50unattended-upgrades
-                $SUDO rm -rf unattended-upgrades-1.4
+                $SUDO rm -rf "unattended-upgrades-$UNATTUPG_RELEASE"
             fi
 
             # Add the remaining settings for all other distributions
@@ -909,21 +952,20 @@ confNetwork() {
     $SUDO sed -i '/net.ipv4.ip_forward=1/s/^#//g' /etc/sysctl.conf
     $SUDO sysctl -p
 
-    # if ufw enabled, configure that
+    # if ufw enabled, configure that (running as root because sometimes the executable is not in the user's $PATH, on Debian for example)
-    if hash ufw 2>/dev/null; then
+    if $SUDO bash -c 'hash ufw' 2>/dev/null; then
         if LANG=en_US.UTF-8 $SUDO ufw status | grep -q inactive
         then
             noUFW=1
         else
             echo "::: Detected UFW is enabled."
             echo "::: Adding UFW rules..."
-            $SUDO cp /etc/.pivpn/ufw_add.txt /tmp/ufw_add.txt
+            $SUDO sed "/delete these required/i *nat\n:POSTROUTING ACCEPT [0:0]\n-I POSTROUTING -s 10.8.0.0/24 -o $IPv4dev -j MASQUERADE\nCOMMIT\n" -i /etc/ufw/before.rules
-            $SUDO sed -i 's/IPv4dev/'"$IPv4dev"'/' /tmp/ufw_add.txt
+            # Insert rules at the beginning of the chain (in case there are other rules that may drop the traffic)
-            $SUDO sed -i "s/\(DEFAULT_FORWARD_POLICY=\).*/\1\"ACCEPT\"/" /etc/default/ufw
+            $SUDO ufw insert 1 allow "$PORT"/"$PROTO" >/dev/null
-            $SUDO sed -i -e '/delete these required/r /tmp/ufw_add.txt' -e//N /etc/ufw/before.rules
+            # Don't forward everything, just the traffic originated from the VPN subnet
-            $SUDO ufw allow "${PORT}/${PROTO}"
+            $SUDO ufw route insert 1 allow in on tun0 from 10.8.0.0/24 out on "$IPv4dev" to any >/dev/null
-            $SUDO ufw allow from 10.8.0.0/24
+            $SUDO ufw reload >/dev/null
-            $SUDO ufw reload
             echo "::: UFW configuration completed."
         fi
     else
@@ -932,7 +974,7 @@ confNetwork() {
     # else configure iptables
     if [[ $noUFW -eq 1 ]]; then
         echo 1 > /tmp/noUFW
-        $SUDO iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o "$IPv4dev" -j MASQUERADE
+        $SUDO iptables -t nat -I POSTROUTING -s 10.8.0.0/24 -o "$IPv4dev" -j MASQUERADE
         case ${PLAT} in
             Ubuntu|Debian|Devuan)
                 $SUDO iptables-save | $SUDO tee /etc/iptables/rules.v4 > /dev/null
@@ -1104,6 +1146,7 @@ installPiVPN() {
     confNetwork
     confOVPN
     setClientDNS
+    setCustomDomain
     confLogging
     finalExports
 }
@@ -1138,8 +1181,7 @@ updatePiVPN() {
 displayFinalMessage() {
     # Final completion message to user
     whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Now run 'pivpn add' to create the ovpn profiles.
-Run 'pivpn help' to see what else you can do!
+Run 'pivpn help' to see what else you can do!" ${r} ${c}
-The install log is in /etc/pivpn." ${r} ${c}
     if (whiptail --title "Reboot" --yesno --defaultno "It is strongly recommended you reboot after installation.  Would you like to reboot now?" ${r} ${c}); then
         whiptail --title "Rebooting" --msgbox "The system will now reboot." ${r} ${c}
         printf "\nRebooting system...\n"
@@ -1277,10 +1319,12 @@ main() {
         # Clone/Update the repos
         clone_or_update_repos
 
-        # Install and log everything to a file
+        # Install
-        installPiVPN | tee ${tmpLog}
+        if installPiVPN; then
-
+            echo "::: Install Complete..."
-        echo "::: Install Complete..."
+        else
+            exit 1
+        fi
     else
         # Source ${setupVars} for use in the rest of the functions.
         source ${setupVars}
@@ -1314,12 +1358,9 @@ main() {
         clone_or_update_repos
 
 
-        updatePiVPN | tee ${tmpLog}
+        updatePiVPN
     fi
 
-    #Move the install log into /etc/pivpn for storage
-    $SUDO mv ${tmpLog} ${instalLogLoc}
-
     echo "::: Restarting services..."
     # Start services
     case ${PLAT} in
@@ -1331,6 +1372,10 @@ main() {
             $SUDO systemctl start openvpn.service
             ;;
     esac
+    
+    # Ensure that cached writes reach persistent storage
+    echo "::: Flushing writes to disk..."
+    sync
 
     echo "::: done."
 
@@ -1349,7 +1394,6 @@ main() {
     fi
 
     echo ":::"
-    echo "::: The install log is located at: ${instalLogLoc}"
 }
 
 if [[ "${PIVPN_TEST}" != true ]] ; then

ca_info.txt

@@ -1,8 +0,0 @@
-CO
-ST
-CITY
-ORG
-ORG-UNIT
-COMMON-NAME
-NAME
-EMAIL

firewall-openvpn-rules.txt

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o IPv4dev -j MASQUERADE

pivpn

@@ -27,30 +27,12 @@ function listOVPNFunc {
 }
 
 function debugFunc {
-    noUFW=$(cat /etc/pivpn/NO_UFW)
     echo "::: Generating Debug Output"
     $SUDO /opt/pivpn/pivpnDebug.sh | tee /tmp/debug.txt
     echo "::: "
     echo "::: Debug output completed above."
     echo "::: Copy saved to /tmp/debug.txt"
     echo "::: "
-    if [[ ${noUFW} -eq 1 ]]; then
-        IPTABLES_FIX=`$SUDO iptables -t nat -L -n -v | grep -c 'MASQUERADE.*10.8.0.0\/24'`
-        $SUDO iptables -t nat -L -n -v | grep -q 'MASQUERADE.*10.8.0.0\/24'
-        if [ $? -ne 0 ]; then
-            IPTABLES_FIX=2
-        fi
-        if [[ ${IPTABLES_FIX} -gt 1 ]]; then
-            echo "::: We detected some potential issues with your iptables."
-            read -p "::: Would you like us to try to fix this? [y/n]: " -n 1 -r
-            echo
-            if [[ ${REPLY} =~ ^[Yy]$ ]]; then
-                $SUDO /opt/pivpn/fix_iptables.sh
-            fi
-            echo "::: Attempt at fix completed."
-            echo "::: Run 'pivpn debug' again to see if we detect issues."
-        fi
-    fi
     exit 1
 }
 

scripts/fix_iptables.sh

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-# PiVPN: Fix iptables script
-# called by pivpnDebug.sh
-
-IPv4dev=$(ip route get 8.8.8.8 | awk '{for(i=1;i<=NF;i++)if($i~/dev/)print $(i+1)}')
-iptables -t nat -F
-iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o ${IPv4dev} -j MASQUERADE
-iptables-save > /etc/iptables/rules.v4
-iptables-restore < /etc/iptables/rules.v4

scripts/makeOVPN.sh

@@ -13,11 +13,12 @@ INSTALL_USER=$(cat /etc/pivpn/INSTALL_USER)
 helpFunc() {
     echo "::: Create a client ovpn profile, optional nopass"
     echo ":::"
-    echo "::: Usage: pivpn <-a|add> [-n|--name <arg>] [-p|--password <arg>]|[nopass] [-h|--help]"
+    echo "::: Usage: pivpn <-a|add> [-n|--name <arg>] [-p|--password <arg>]|[nopass] [-d|--days <number>] [-h|--help]"
     echo ":::"
     echo "::: Commands:"
     echo ":::  [none]               Interactive mode"
     echo ":::  nopass               Create a client without a password"
+    echo ":::  -d,--days            Expire the certificate after specified number of days (default: 1080)"
     echo ":::  -n,--name            Name for the Client (default: '"$(hostname)"')"
     echo ":::  -p,--password        Password for the Client (no default)"
     echo ":::  -h,--help            Show this help dialog"
@@ -48,6 +49,16 @@ do
             fi
             PASSWD="$_val"
             ;;
+        -d|--days|--days=*)
+            _val="${_key##--days=}"
+            if test "$_val" = "$_key"
+            then
+                test $# -lt 2 && echo "Missing value for the optional argument '$_key'." && exit 1
+                _val="$2"
+                shift
+            fi
+            DAYS="$_val"
+            ;;
         -h|--help)
             helpFunc
             exit 0
@@ -71,6 +82,7 @@ function keynoPASS() {
     #Build the client key
     expect << EOF
     set timeout -1
+    set env(EASYRSA_CERT_EXPIRE) "${DAYS}"
     spawn ./easyrsa build-client-full "${NAME}" nopass
     expect eof
 EOF
@@ -115,6 +127,7 @@ function keyPASS() {
 
     expect << EOF
     set timeout -1
+    set env(EASYRSA_CERT_EXPIRE) "${DAYS}"
     spawn ./easyrsa build-client-full "${NAME}"
     expect "Enter PEM pass phrase" { send -- "${PASSWD}\r" }
     expect "Verifying - Enter PEM pass phrase" { send -- "${PASSWD}\r" }
@@ -129,8 +142,13 @@ if [ -z "${NAME}" ]; then
     read -r NAME
 fi
 
-if [[ "${NAME}" =~ [^a-zA-Z0-9\-] ]]; then
+if [[ ${NAME::1} == "." ]] || [[ ${NAME::1} == "-" ]]; then
-    echo "Name can only contain alphanumeric characters and dashes (-)."
+    echo "Names cannot start with a dot (.) or a dash (-)."
+    exit 1
+fi
+
+if [[ "${NAME}" =~ [^a-zA-Z0-9\.\-\@\_] ]]; then
+    echo "Name can only contain alphanumeric characters and these characters (.-@_)."
     exit 1
 fi
 
@@ -164,6 +182,18 @@ if [ "${NAME}" == "ta" ] || [ "${NAME}" == "server" ] || [ "${NAME}" == "ca" ];
     exit 1
 fi
 
+#As of EasyRSA 3.0.6, by default certificates last 1080 days, see https://github.com/OpenVPN/easy-rsa/blob/6b7b6bf1f0d3c9362b5618ad18c66677351cacd1/easyrsa3/vars.example
+if [ -z "${DAYS}" ]; then
+    read -r -e -p "How many days should the certificate last?  " -i 1080 DAYS
+fi
+
+if [[ ! "$DAYS" =~ ^[0-9]+$ ]] || [ "$DAYS" -lt 1 ] || [ "$DAYS" -gt 3650 ]; then
+    #The CRL lasts 3650 days so it doesn't make much sense that certificates would last longer
+    echo "Please input a valid number of days, between 1 and 3650 inclusive."
+    exit 1
+
+fi
+
 cd /etc/openvpn/easy-rsa || exit
 
 if [[ "${NO_PASS}" =~ "1" ]]; then
@@ -241,6 +271,8 @@ echo "tls-auth Private Key found: $TA"
 # Copy the .ovpn profile to the home directory for convenient remote access
 cp "/etc/openvpn/easy-rsa/pki/$NAME$FILEEXT" "/home/$INSTALL_USER/ovpns/$NAME$FILEEXT"
 chown "$INSTALL_USER" "/home/$INSTALL_USER/ovpns/$NAME$FILEEXT"
+chmod o-r "/etc/openvpn/easy-rsa/pki/$NAME$FILEEXT"
+chmod o-r "/home/$INSTALL_USER/ovpns/$NAME$FILEEXT"
 printf "\n\n"
 printf "========================================================\n"
 printf "\e[1mDone! %s successfully created!\e[0m \n" "$NAME$FILEEXT"

scripts/pivpnDebug.sh

@@ -1,23 +1,169 @@
 #!/usr/bin/env bash
 # This scripts runs as root
-printf ":::\t\t\t\t\t:::\n::\t\tPiVPN Debug\t\t ::\n"
+
-printf ":::\t\t\t\t\t:::\n::\tLatest Commit\t\t\t ::\n:::\t\t\t\t\t:::\n"
+PORT=$(cat /etc/pivpn/INSTALL_PORT)
+PROTO=$(cat /etc/pivpn/INSTALL_PROTO)
+IPv4dev="$(cat /etc/pivpn/pivpnINTERFACE)"
+REMOTE="$(grep 'remote ' /etc/openvpn/easy-rsa/pki/Default.txt | awk '{print $2}')"
+ERR=0
+
+echo -e "::::\t\t\e[4mPiVPN debug\e[0m\t\t ::::"
+printf "=============================================\n"
+echo -e "::::\t\t\e[4mLatest commit\e[0m\t\t ::::"
 git --git-dir /etc/.pivpn/.git log -n 1
-printf ":::\t\t\t\t\t:::\n::\tRecursive list of files in\t ::\n"
+printf "=============================================\n"
-printf "::\t/etc/openvpn/easy-rsa/pki\t ::\n:::\t\t\t\t\t:::\n"
+echo -e "::::\t    \e[4mInstallation settings\e[0m    \t ::::"
-ls -LR /etc/openvpn/easy-rsa/pki/ -Ireqs -Icerts_by_serial
-printf ":::\t\t\t\t\t:::\n::\tOutput of /etc/pivpn/*\t\t ::\n:::\t\t\t\t\t:::\n"
 for filename in /etc/pivpn/*; do
-    if [[ "${filename}" != "/etc/pivpn/install.log" ]]; then
+    if [ "$filename" != "/etc/pivpn/setupVars.conf" ]; then
-        echo ":: START $filename ::"
+        echo "$filename -> $(cat "$filename")"
-        cat "$filename"
-        echo ":: END $filename ::"
     fi
 done
-printf ":::\t\t\t\t\t:::\n:: /etc/openvpn/easy-rsa/pki/Default.txt ::\n:::\t\t\t\t\t:::\n"
+printf "=============================================\n"
-cat /etc/openvpn/easy-rsa/pki/Default.txt
+echo -e "::::\t\e[4msetupVars file shown below\e[0m\t ::::"
-if [[ ${noUFW} -eq 1 ]]; then
+sed "s/$REMOTE/REMOTE/" < /etc/pivpn/setupVars.conf
-    printf ":::\t\t\t\t\t:::\n::\tOutput of iptables\t\t ::\n:::\t\t\t\t\t:::\n"
+printf "=============================================\n"
-    iptables -t nat -L -n -v
+echo -e "::::  \e[4mServer configuration shown below\e[0m   ::::"
+cat /etc/openvpn/server.conf
+printf "=============================================\n"
+echo -e "::::  \e[4mClient template file shown below\e[0m   ::::"
+sed "s/$REMOTE/REMOTE/" < /etc/openvpn/easy-rsa/pki/Default.txt
+printf "=============================================\n"
+echo -e ":::: \t\e[4mRecursive list of files in\e[0m\t ::::\n::: \e[4m/etc/openvpn/easy-rsa/pki shows below\e[0m :::"
+ls -LR /etc/openvpn/easy-rsa/pki/ -Ireqs -Icerts_by_serial
+printf "=============================================\n"
+echo -e "::::\t\t\e[4mSelf check\e[0m\t\t ::::"
+
+if [ "$(cat /proc/sys/net/ipv4/ip_forward)" -eq 1 ]; then
+    echo ":: [OK] IP forwarding is enabled"
+else
+    ERR=1
+    read -r -p ":: [ERR] IP forwarding is not enabled, attempt fix now? [Y/n] " REPLY
+    if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+        sed -i '/net.ipv4.ip_forward=1/s/^#//g' /etc/sysctl.conf
+        sysctl -p
+        echo "Done"
+    fi
 fi
-printf ":::\t\t\t\t\t:::\n::\tDebug Output Complete\t\t ::\n:::\t\t\t\t\t:::\n"
+
+if [ "$(cat /etc/pivpn/NO_UFW)" -eq 1 ]; then
+
+    if iptables -t nat -C POSTROUTING -s 10.8.0.0/24 -o "${IPv4dev}" -j MASQUERADE &> /dev/null; then
+        echo ":: [OK] Iptables MASQUERADE rule set"
+    else
+        ERR=1
+        read -r -p ":: [ERR] Iptables MASQUERADE rule is not set, attempt fix now? [Y/n] " REPLY
+        if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+            iptables -t nat -F
+            iptables -t nat -I POSTROUTING -s 10.8.0.0/24 -o "${IPv4dev}" -j MASQUERADE
+            iptables-save > /etc/iptables/rules.v4
+            iptables-restore < /etc/iptables/rules.v4
+            echo "Done"
+        fi
+    fi
+
+else
+
+    if LANG="en_US.UTF-8" ufw status | grep -qw 'active'; then
+        echo ":: [OK] Ufw is enabled"
+    else
+        ERR=1
+        read -r -p ":: [ERR] Ufw is not enabled, try to enable now? [Y/n] " REPLY
+        if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+            ufw enable
+        fi
+    fi
+
+    if iptables -t nat -C POSTROUTING -s 10.8.0.0/24 -o "${IPv4dev}" -j MASQUERADE &> /dev/null; then
+        echo ":: [OK] Iptables MASQUERADE rule set"
+    else
+        ERR=1
+        read -r -p ":: [ERR] Iptables MASQUERADE rule is not set, attempt fix now? [Y/n] " REPLY
+        if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+            sed "/delete these required/i *nat\n:POSTROUTING ACCEPT [0:0]\n-I POSTROUTING -s 10.8.0.0/24 -o $IPv4dev -j MASQUERADE\nCOMMIT\n" -i /etc/ufw/before.rules
+            ufw reload
+            echo "Done"
+        fi
+    fi
+
+    if iptables -C ufw-user-input -p "${PROTO}" --dport "${PORT}" -j ACCEPT &> /dev/null; then
+        echo ":: [OK] Ufw input rule set"
+    else
+        ERR=1
+        read -r -p ":: [ERR] Ufw input rule is not set, attempt fix now? [Y/n] " REPLY
+        if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+            ufw insert 1 allow "$PORT"/"$PROTO"
+            ufw reload
+            echo "Done"
+        fi
+    fi
+
+    if iptables -C ufw-user-forward -i tun0 -o "${IPv4dev}" -s 10.8.0.0/24 -j ACCEPT &> /dev/null; then
+        echo ":: [OK] Ufw forwarding rule set"
+    else
+        ERR=1
+        read -r -p ":: [ERR] Ufw forwarding rule is not set, attempt fix now? [Y/n] " REPLY
+        if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+            ufw route insert 1 allow in on tun0 from 10.8.0.0/24 out on "$IPv4dev" to any
+            ufw reload
+            echo "Done"
+        fi
+    fi
+
+fi
+
+if systemctl is-active -q openvpn; then
+    echo ":: [OK] OpenVPN is running"
+else
+    ERR=1
+    read -r -p ":: [ERR] OpenVPN is not running, try to start now? [Y/n] " REPLY
+    if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+        systemctl start openvpn
+        echo "Done"
+    fi
+fi
+
+if systemctl is-enabled -q openvpn; then
+    echo ":: [OK] OpenVPN is enabled (it will automatically start on reboot)"
+else
+    ERR=1
+    read -r -p ":: [ERR] OpenVPN is not enabled, try to enable now? [Y/n] " REPLY
+    if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+        systemctl enable openvpn
+        echo "Done"
+    fi
+fi
+
+# grep -w (whole word) is used so port 111940 with now match when looking for 1194
+if netstat -uanpt | grep openvpn | grep -w "${PORT}" | grep -q "${PROTO}"; then
+    echo ":: [OK] OpenVPN is listening on port ${PORT}/${PROTO}"
+else
+    ERR=1
+    read -r -p ":: [ERR] OpenVPN is not listening, try to restart now? [Y/n] " REPLY
+    if [[ ${REPLY} =~ ^[Yy]$ ]]; then
+        systemctl restart openvpn
+        echo "Done"
+    fi
+fi
+
+if [ "$ERR" -eq 1 ]; then
+    echo -e "[INFO] Run \e[1mpivpn -d\e[0m again to see if we detect issues"
+fi
+
+printf "=============================================\n"
+echo -e "::::      \e[4mSnippet of the server log\e[0m      ::::"
+tail -20 /var/log/openvpn.log
+printf "=============================================\n"
+echo -e "::::\t\t\e[4mDebug complete\e[0m\t\t ::::"
+
+# Telekom Hybrid Check
+wget -O /tmp/hybcheck http://speedport.ip &>/dev/null
+if grep -Fq "Speedport Pro" /tmp/hybcheck || grep -Fq "Speedport Hybrid" /tmp/hybcheck
+then
+    printf ":::\t\t\t\t\t:::\n::\tTelekom Hybrid Check\t\t ::\n:::\t\t\t\t\t:::\n"
+    echo "Are you using Telekom Hybrid (found a hybrid compatible router)?"
+    echo "If yes and you have problems with the connections you can test the following:"
+    echo "Add 'tun-mtu 1316' in /etc/openvpn/easy-rsa/pki/Default.txt to set a hybrid compatible MTU size (new .ovpn files)."
+    echo "For already existing .ovpn files 'tun-mtu 1316' can also be inserted there manually."
+    echo "With Telekom hybrid connections, you may have to experiment a little with MTU (tun-mtu, link-mtu and mssfix)."
+fi
+rm /tmp/hybcheck

scripts/removeOVPN.sh

@@ -114,6 +114,7 @@ for (( ii = 0; ii < ${#CERTS_TO_REVOKE[@]}; ii++)); do
     rm -rf "pki/private/${CERTS_TO_REVOKE[ii]}.key"
     rm -rf "pki/issued/${CERTS_TO_REVOKE[ii]}.crt"
     rm -rf "/home/${INSTALL_USER}/ovpns/${CERTS_TO_REVOKE[ii]}.ovpn"
+    rm -rf "/etc/openvpn/easy-rsa/pki/${CERTS_TO_REVOKE[ii]}.ovpn"
     cp /etc/openvpn/easy-rsa/pki/crl.pem /etc/openvpn/crl.pem
 done
 printf "::: Completed!\n"

scripts/uninstall.sh

@@ -21,6 +21,7 @@ PLAT=$(cat /etc/pivpn/DET_PLATFORM)
 NO_UFW=$(cat /etc/pivpn/NO_UFW)
 PORT=$(cat /etc/pivpn/INSTALL_PORT)
 PROTO=$(cat /etc/pivpn/INSTALL_PROTO)
+IPv4dev="$(cat /etc/pivpn/pivpnINTERFACE)"
 
 # Find the rows and columns. Will default to 80x24 if it can not be detected.
 screen_size=$(stty size 2>/dev/null || echo 24 80)
@@ -107,11 +108,10 @@ echo ":::"
     sysctl -p
 
     if [[ $NO_UFW -eq 0 ]]; then
-        $SUDO sed -i "s/\(DEFAULT_FORWARD_POLICY=\).*/\1\"DROP\"/" /etc/default/ufw
+        $SUDO sed -z "s/*nat\n:POSTROUTING ACCEPT \[0:0\]\n-I POSTROUTING -s 10.8.0.0\/24 -o $IPv4dev -j MASQUERADE\nCOMMIT\n\n//" -i /etc/ufw/before.rules
-        $SUDO sed -i '/START OPENVPN RULES/,/END OPENVPN RULES/ d' /etc/ufw/before.rules
+        $SUDO ufw delete allow "$PORT"/"$PROTO" >/dev/null
-        $SUDO ufw delete allow from 10.8.0.0/24 >/dev/null
+        $SUDO ufw route delete allow in on tun0 from 10.8.0.0/24 out on "$IPv4dev" to any >/dev/null
-        $SUDO ufw delete allow ${PORT}/${PROTO} >/dev/null
+        $SUDO ufw reload >/dev/null
-        $SUDO ufw reload
     fi
 
     echo ":::"

ufw_add.txt

@@ -1,9 +0,0 @@
-# START OPENVPN RULES
-# NAT table rules
-*nat
-:POSTROUTING ACCEPT [0:0] 
-# Allow traffic from OpenVPN client to masquerade 
--A POSTROUTING -s 10.8.0.0/24 -o IPv4dev -j MASQUERADE
-COMMIT
-# END OPENVPN RULES
-