#!/usr/bin/env bash
# PiVPN: Trivial OpenVPN or WireGuard setup and configuration
# Easiest setup and mangement of OpenVPN or WireGuard on Raspberry Pi
# https://pivpn.dev
# Heavily adapted from the pi-hole.net project and...
# https://github.com/StarshipEngineer/OpenVPN-Setup/
#
# Install with this command (from your Pi):
#
# curl -L https://install.pivpn.dev | bash
# Make sure you have `curl` installed

######## VARIABLES #########
pivpnGitUrl="https://github.com/pivpn/pivpn.git"
setupVars="/etc/pivpn/setupVars.conf"
pivpnFilesDir="/etc/.pivpn"

### PKG Vars ###
PKG_MANAGER="apt-get"
PKG_CACHE="/var/lib/apt/lists/"
### FIXME: quoting UPDATE_PKG_CACHE and PKG_INSTALL hangs the script, shellcheck SC2086
UPDATE_PKG_CACHE="${PKG_MANAGER} update"
PKG_INSTALL="${PKG_MANAGER} --yes --no-install-recommends install"
PKG_COUNT="${PKG_MANAGER} -s -o Debug::NoLocking=true upgrade | grep -c ^Inst || true"

# Dependencies that are required by the script, regardless of the VPN protocol chosen
BASE_DEPS=(git tar wget curl grep dnsutils whiptail net-tools bsdmainutils)

# Dependencies that where actually installed by the script. For example if the script requires
# grep and dnsutils but dnsutils is already installed, we save grep here. This way when uninstalling
# PiVPN we won't prompt to remove packages that may have been installed by the user for other reasons
INSTALLED_PACKAGES=()

easyrsaVer="3.0.6"
easyrsaRel="https://github.com/OpenVPN/easy-rsa/releases/download/v${easyrsaVer}/EasyRSA-unix-v${easyrsaVer}.tgz"

subnetClass="24"
dhcpcdFile="/etc/dhcpcd.conf"
debianOvpnUserGroup="openvpn:openvpn"

# Raspbian's unattended-upgrades package downloads Debian's config, so this is the link for the proper config
UNATTUPG_RELEASE="1.16"
UNATTUPG_CONFIG="https://github.com/mvo5/unattended-upgrades/archive/${UNATTUPG_RELEASE}.tar.gz"

# Find the rows and columns. Will default to 80x24 if it can not be detected.
screen_size=$(stty size 2>/dev/null || echo 24 80)
rows=$(echo "$screen_size" | awk '{print $1}')
columns=$(echo "$screen_size" | awk '{print $2}')

######## Undocumented Flags. Shhh ########
runUnattended=false
skipSpaceCheck=false
reconfigure=false

# Divide by two so the dialogs take up half of the screen, which looks nice.
r=$(( rows / 2 ))
c=$(( columns / 2 ))
# Unless the screen is tiny
r=$(( r < 20 ? 20 : r ))
c=$(( c < 70 ? 70 : c ))

# Find IP (with netmask) and gateway used to route to outside world
BaseIPv4addr=$(ip route get 192.0.2.1 | awk '{print $7}')
CurrentIPv4addr=$(ip -o -f inet address | grep "${BaseIPv4addr}/" | awk '{print $4}')
CurrentIPv4gw=$(ip route get 192.0.2.1 | awk '{print $3}')

# Find network interfaces whose state is UP, so as to skip virtual interfaces and the loopback interface
availableInterfaces=$(ip -o link | awk '/state UP/ {print $2}' | cut -d':' -f1 | cut -d'@' -f1)

######## SCRIPT ############

main(){

	######## FIRST CHECK ########
	# Must be root to install
	echo ":::"
	if [[ $EUID -eq 0 ]];then
		echo "::: You are root."
	else
		echo "::: sudo will be used for the install."
		# Check if it is actually installed
		# If it isn't, exit because the install cannot complete
		if [[ $(dpkg-query -s sudo) ]];then
			export SUDO="sudo"
			export SUDOE="sudo -E"
		else
			echo "::: Please install sudo or run this as root."
			exit 1
		fi
	fi

	# Check arguments for the undocumented flags
	for var in "$@"; do
		case "$var" in
			"--i_do_not_follow_recommendations"   ) skipSpaceCheck=false;;
			"--unattended"     ) runUnattended=true;;
			"--reconfigure"  ) reconfigure=true;;
		esac
	done

	if [[ "${runUnattended}" == true ]]; then
		echo "::: --unattended passed to install script, no whiptail dialogs will be displayed"
		if [ -z "$2" ]; then
			echo "::: No configuration file passed, using default settings..."
		else
			if [ -r "$2" ]; then
		# shellcheck disable=SC1090
				source "$2"
			else
				echo "::: Can't open $2"
				exit 1
			fi
		fi
	fi

	if [ -r "$setupVars" ]; then
		if [[ "${reconfigure}" == true ]]; then
			echo "::: --reconfigure passed to install script, will reinstall PiVPN overwriting existing settings"
			UpdateCmd="Reconfigure"
		elif [[ "${runUnattended}" == true ]]; then
			### What should the script do when passing --unattended to an existing installation?
			UpdateCmd="Reconfigure"
		else
			askAboutExistingInstall
		fi
	fi

	if [ -z "$UpdateCmd" ] || [ "$UpdateCmd" = "Reconfigure" ]; then
		:
	elif [ "$UpdateCmd" = "Update" ]; then
		$SUDO /opt/pivpn/update.sh "$@"
		exit 0
	elif [ "$UpdateCmd" = "Repair" ]; then
		# shellcheck disable=SC1090
		source "$setupVars"
		runUnattended=true
	fi

	# Check for supported distribution
	distroCheck

	# Checks for hostname Length
	checkHostname

	# Start the installer
	# Verify there is enough disk space for the install
	if [[ "${skipSpaceCheck}" == true ]]; then
		echo "::: --i_do_not_follow_recommendations passed to script, skipping free disk space verification!"
	else
		verifyFreeDiskSpace
	fi

	updatePackageCache

	# Notify user of package availability
	notifyPackageUpdatesAvailable

	# Install packages used by this installation script
	preconfigurePackages
	installDependentPackages BASE_DEPS[@]

	# Display welcome dialogs
	welcomeDialogs

	# Find interfaces and let the user choose one
	chooseInterface

	if [ "$PLAT" != "Raspbian" ]; then
		avoidStaticIPv4Ubuntu
	else
		getStaticIPv4Settings
		if [ -z "$dhcpReserv" ] || [ "$dhcpReserv" -ne 1 ]; then
			setStaticIPv4
		fi
	fi

	# Choose the user for the ovpns
	chooseUser

	# Clone/Update the repos
	cloneOrUpdateRepos

	# Install
	if installPiVPN; then
		echo "::: Install Complete..."
	else
		exit 1
	fi

	# Start services
	restartServices

	# Ask if unattended-upgrades will be enabled
	askUnattendedUpgrades

	if [ "$UNATTUPG" -eq 1 ]; then
		confUnattendedUpgrades
	fi

	# Save installation setting to the final location
	echo "INSTALLED_PACKAGES=(${INSTALLED_PACKAGES[*]})" >> /tmp/setupVars.conf
	$SUDO cp /tmp/setupVars.conf "$setupVars"

	installScripts

	# Ensure that cached writes reach persistent storage
	echo "::: Flushing writes to disk..."
	sync
	echo "::: done."

	displayFinalMessage
	echo ":::"
}

####### FUNCTIONS ##########

askAboutExistingInstall(){
	opt1a="Update"
	opt1b="Get the latest PiVPN scripts"

	opt2a="Repair"
	opt2b="Reinstall PiVPN using existing settings"

	opt3a="Reconfigure"
	opt3b="Reinstall PiVPN with new settings"

	UpdateCmd=$(whiptail --title "Existing Install Detected!" --menu "\nWe have detected an existing install.\n\nPlease choose from the following options:" ${r} ${c} 3 \
	"${opt1a}"  "${opt1b}" \
	"${opt2a}"  "${opt2b}" \
	"${opt3a}"  "${opt3b}" 3>&2 2>&1 1>&3) || \
	{ echo "::: Cancel selected. Exiting"; exit 1; }

	echo "::: ${UpdateCmd} option selected."
}


# Compatibility, functions to check for supported OS
# distroCheck, maybeOSSupport, noOSSupport
distroCheck(){
	# if lsb_release command is on their system
	if command -v lsb_release > /dev/null; then

		PLAT=$(lsb_release -si)
		OSCN=$(lsb_release -sc)

	else # else get info from os-release

		# shellcheck disable=SC1091
		source /etc/os-release
		PLAT=$(awk '{print $1}' <<< "$NAME")
		VER="$VERSION_ID"
		declare -A VER_MAP=(["9"]="stretch" ["10"]="buster" ["16.04"]="xenial" ["18.04"]="bionic")
		OSCN=${VER_MAP["${VER}"]}
	fi

	case ${PLAT} in
		Debian|Raspbian|Ubuntu)
			case ${OSCN} in
				buster|xenial|bionic|stretch)
				:
				;;
				*)
				maybeOSSupport
				;;
			esac
		;;
		*)
		noOSSupport
		;;
	esac

	if [ "$PLAT" = "Raspbian" ]; then
		BASE_DEPS+=(dhcpcd5)
	fi

	echo "PLAT=${PLAT}" > /tmp/setupVars.conf
	echo "OSCN=${OSCN}" >> /tmp/setupVars.conf
}

noOSSupport(){
	if [ "${runUnattended}" = 'true' ]; then
		echo "::: Invalid OS detected"
		echo "::: We have not been able to detect a supported OS."
		echo "::: Currently this installer supports Raspbian, Debian and Ubuntu."
		exit 1
	fi

	whiptail --msgbox --backtitle "INVALID OS DETECTED" --title "Invalid OS" "We have not been able to detect a supported OS.
Currently this installer supports Raspbian, Debian and Ubuntu.
For more details, check our documentation at https://github.com/pivpn/pivpn/wiki " ${r} ${c}
	exit 1
}

maybeOSSupport(){
	if [ "${runUnattended}" = 'true' ]; then
		echo "::: OS Not Supported"
		echo "::: You are on an OS that we have not tested but MAY work, continuing anyway..."
		return
	fi

	if (whiptail --backtitle "Untested OS" --title "Untested OS" --yesno "You are on an OS that we have not tested but MAY work.
Currently this installer supports Raspbian, Debian and Ubuntu.
For more details about supported OS please check our documentation at https://github.com/pivpn/pivpn/wiki
Would you like to continue anyway?" ${r} ${c}) then
		echo "::: Did not detect perfectly supported OS but,"
		echo "::: Continuing installation at user's own risk..."
	else
		echo "::: Exiting due to untested OS"
		exit 1
	fi
}


checkHostname(){
###Checks for hostname size
	host_name=$(hostname -s)
	if [[ ! ${#host_name} -le 28 ]]; then
		if [ "${runUnattended}" = 'true' ]; then
			echo "::: Your hostname is too long."
			echo "::: Use 'hostnamectl set-hostname YOURHOSTNAME' to set a new hostname"
			echo "::: It must be less then 28 characters long and it must not use special characters"
			exit 1
		fi
		until [[ ${#host_name} -le 28 && $host_name  =~ ^[a-zA-Z0-9][a-zA-Z0-9-]{1,28}$ ]]; do
			host_name=$(whiptail --inputbox "Your hostname is too long.\\nEnter new hostname with less then 28 characters\\nNo special characters allowed." \
		   --title "Hostname too long" ${r} ${c} 3>&1 1>&2 2>&3)
			$SUDO hostnamectl set-hostname "${host_name}"
			if [[ ${#host_name} -le 28 && $host_name  =~ ^[a-zA-Z0-9][a-zA-Z0-9-]{1,28}$  ]]; then
				echo "::: Hostname valid and length OK, proceeding..."
			fi
		done
	else
		echo "::: Hostname length OK"
	fi
}

spinner(){
	local pid=$1
	local delay=0.50
	local spinstr='/-\|'
	while ps a | awk '{print $1}' | grep -q "$pid"; do
		local temp=${spinstr#?}
		printf " [%c]  " "${spinstr}"
		local spinstr=${temp}${spinstr%"$temp"}
		sleep ${delay}
		printf "\\b\\b\\b\\b\\b\\b"
	done
	printf "    \\b\\b\\b\\b"
}

verifyFreeDiskSpace(){
	# If user installs unattended-upgrades we'd need about 60MB so will check for 75MB free
	echo "::: Verifying free disk space..."
	local required_free_kilobytes=76800
	local existing_free_kilobytes
	existing_free_kilobytes=$(df -Pk | grep -m1 '\/$' | awk '{print $4}')

	# - Unknown free disk space , not a integer
	if ! [[ "${existing_free_kilobytes}" =~ ^([0-9])+$ ]]; then
		echo "::: Unknown free disk space!"
		echo "::: We were unable to determine available free disk space on this system."
		if [ "${runUnattended}" = 'true' ]; then
			exit 1
		fi
		echo "::: You may continue with the installation, however, it is not recommended."
		read -r -p "::: If you are sure you want to continue, type YES and press enter :: " response
		case $response in
			[Y][E][S])
				;;
			*)
				echo "::: Confirmation not received, exiting..."
				exit 1
				;;
		esac
	# - Insufficient free disk space
	elif [[ ${existing_free_kilobytes} -lt ${required_free_kilobytes} ]]; then
		echo "::: Insufficient Disk Space!"
		echo "::: Your system appears to be low on disk space. PiVPN recommends a minimum of $required_free_kilobytes KiloBytes."
		echo "::: You only have ${existing_free_kilobytes} KiloBytes free."
		echo "::: If this is a new install on a Raspberry Pi you may need to expand your disk."
		echo "::: Try running 'sudo raspi-config', and choose the 'expand file system option'"
		echo "::: After rebooting, run this installation again. (curl -L https://install.pivpn.dev | bash)"

		echo "Insufficient free space, exiting..."
		exit 1
	fi
}

updatePackageCache(){
	#Running apt-get update/upgrade with minimal output can cause some issues with
	#requiring user input

	#Check to see if apt-get update has already been run today
	#it needs to have been run at least once on new installs!
	timestamp=$(stat -c %Y ${PKG_CACHE})
	timestampAsDate=$(date -d @"${timestamp}" "+%b %e")
	today=$(date "+%b %e")


	 if [ ! "${today}" == "${timestampAsDate}" ]; then
		#update package lists
		echo ":::"
		echo -ne "::: ${PKG_MANAGER} update has not been run today. Running now...\\n"
        # shellcheck disable=SC2086
		$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $!
		echo " done!"
	fi
}

notifyPackageUpdatesAvailable(){
	# Let user know if they have outdated packages on their system and
	# advise them to run a package update at soonest possible.
	echo ":::"
	echo -n "::: Checking ${PKG_MANAGER} for upgraded packages...."
	updatesToInstall=$(eval "${PKG_COUNT}")
	echo " done!"
	echo ":::"
	if [[ ${updatesToInstall} -eq "0" ]]; then
		echo "::: Your system is up to date! Continuing with PiVPN installation..."
	else
		echo "::: There are ${updatesToInstall} updates available for your system!"
		echo "::: We recommend you update your OS after installing PiVPN! "
		echo ":::"
	fi
}

preconfigurePackages(){
	# Add support for https repositories if there are any that use it otherwise the installation will silently fail
  if [[ -f /etc/apt/sources.list ]]; then
		if grep -q https /etc/apt/sources.list; then
	  	BASE_DEPS+=("apt-transport-https")
		fi
  fi

	if [[ ${OSCN} == "buster" ]]; then
		$SUDO update-alternatives --set iptables /usr/sbin/iptables-legacy
		$SUDO update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy
	fi

	# if ufw is enabled, configure that.
	# running as root because sometimes the executable is not in the user's $PATH
	if $SUDO bash -c 'command -v ufw' > /dev/null; then
		if LANG=en_US.UTF-8 $SUDO ufw status | grep -q inactive; then
			USING_UFW=0
		else
			USING_UFW=1
		fi
	else
		USING_UFW=0
	fi

	if [ "$USING_UFW" -eq 0 ]; then
		BASE_DEPS+=(iptables-persistent)
		echo iptables-persistent iptables-persistent/autosave_v4 boolean true | $SUDO debconf-set-selections
		echo iptables-persistent iptables-persistent/autosave_v6 boolean false | $SUDO debconf-set-selections
	fi

	echo "USING_UFW=${USING_UFW}" >> /tmp/setupVars.conf
}

installDependentPackages(){
	declare -a TO_INSTALL=()

	# Install packages passed in via argument array
	# No spinner - conflicts with set -e
	declare -a argArray1=("${!1}")

	for i in "${argArray1[@]}"; do
		echo -n ":::    Checking for $i..."
		if dpkg-query -W -f='${Status}' "${i}" 2>/dev/null | grep -q "ok installed"; then
			echo " installed!"
		else
			echo " not installed!"
			# Add this package to the list of packages in the argument array that need to be installed
			TO_INSTALL+=("${i}")
		fi
	done

	if command -v debconf-apt-progress > /dev/null; then
        # shellcheck disable=SC2086
		$SUDO debconf-apt-progress -- ${PKG_INSTALL} "${TO_INSTALL[@]}"
	else
		# shellcheck disable=SC2086
		$SUDO ${PKG_INSTALL} "${TO_INSTALL[@]}"
	fi

	local FAILED=0

	for i in "${TO_INSTALL[@]}"; do
		if dpkg-query -W -f='${Status}' "${i}" 2>/dev/null | grep -q "ok installed"; then
			echo ":::    Package $i successfully installed!"
			# Add this package to the total list of packages that were actually installed by the script
			INSTALLED_PACKAGES+=("${i}")
		else
			echo ":::    Failed to install $i!"
			((FAILED++))
		fi
	done

	if [ "$FAILED" -gt 0 ]; then
		exit 1
	fi
}

welcomeDialogs(){
	if [ "${runUnattended}" = 'true' ]; then
		echo "::: PiVPN Automated Installer"
		echo "::: This installer will transform your ${PLAT} host into an OpenVPN or WireGuard server!"
		echo "::: Initiating network interface"
		return
	fi

	# Display the welcome dialog
	whiptail --msgbox --backtitle "Welcome" --title "PiVPN Automated Installer" "This installer will transform your Raspberry Pi into an OpenVPN or WireGuard server!" ${r} ${c}

	# Explain the need for a static address
	whiptail --msgbox --backtitle "Initiating network interface" --title "Static IP Needed" "The PiVPN is a SERVER so it needs a STATIC IP ADDRESS to function properly.

In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." ${r} ${c}
}

chooseInterface(){
# Turn the available interfaces into an array so it can be used with a whiptail dialog
local interfacesArray=()
# Number of available interfaces
local interfaceCount
# Whiptail variable storage
local chooseInterfaceCmd
# Temporary Whiptail options storage
local chooseInterfaceOptions
# Loop sentinel variable
local firstloop=1

if [ -z "$availableInterfaces" ]; then
    echo "::: Could not find any active network interface, exiting"
    exit 1
else
    while read -r line; do
        mode="OFF"
        if [[ ${firstloop} -eq 1 ]]; then
            firstloop=0
            mode="ON"
        fi
        interfacesArray+=("${line}" "available" "${mode}")
        ((interfaceCount++))
    done <<< "${availableInterfaces}"
fi

if [ "${runUnattended}" = 'true' ]; then
    if [ -z "$IPv4dev" ]; then
        if [ $interfaceCount -eq 1 ]; then
            IPv4dev="${availableInterfaces}"
            echo "::: No interface specified, but only ${IPv4dev} is available, using it"
        else
            echo "::: No interface specified and failed to determine one"
            exit 1
        fi
    else
        if ip -o link | grep -qw "${IPv4dev}"; then
            echo "::: Using interface: ${IPv4dev}"
        else
          	echo "::: Interface ${IPv4dev} does not exist"
            exit 1
        fi
    fi
    echo "IPv4dev=${IPv4dev}" >> /tmp/setupVars.conf
    return
else
    if [ "$interfaceCount" -eq 1 ]; then
        IPv4dev="${availableInterfaces}"
        echo "IPv4dev=${IPv4dev}" >> /tmp/setupVars.conf
        return
    fi
fi

chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An interface (press space to select):" "${r}" "${c}" "${interfaceCount}")
if chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty) ; then
    for desiredInterface in ${chooseInterfaceOptions}; do
        IPv4dev=${desiredInterface}
        echo "::: Using interface: $IPv4dev"
        echo "IPv4dev=${IPv4dev}" >> /tmp/setupVars.conf
    done
else
    echo "::: Cancel selected, exiting...."
    exit 1
fi
}

avoidStaticIPv4Ubuntu() {
	if [ "${runUnattended}" = 'true' ]; then
		echo "::: Since we think you are not using Raspbian, we will not configure a static IP for you."
		return
	fi

	# If we are in Ubuntu then they need to have previously set their network, so just use what you have.
	whiptail --msgbox --backtitle "IP Information" --title "IP Information" "Since we think you are not using Raspbian, we will not configure a static IP for you.
If you are in Amazon then you can not configure a static IP anyway. Just ensure before this installer started you had set an elastic IP on your instance." ${r} ${c}
}

validIP(){
	local ip=$1
	local stat=1

	if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
		OIFS=$IFS
		IFS='.'
		read -r -a ip <<< "$ip"
		IFS=$OIFS
		[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
		&& ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
		stat=$?
	fi
	return $stat
}

validIPAndNetmask(){
	local ip=$1
	local stat=1
	ip="${ip/\//.}"

	if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,2}$ ]]; then
		OIFS=$IFS
		IFS='.'
		read -r -a ip <<< "$ip"
		IFS=$OIFS
		[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
		&& ${ip[2]} -le 255 && ${ip[3]} -le 255 \
		&& ${ip[4]} -le 32 ]]
		stat=$?
	fi
	return $stat
}

getStaticIPv4Settings() {
	# Grab their current DNS Server
	IPv4dns=$(grep nameserver /etc/resolv.conf | awk '{print $2}' | xargs)

	if [ "${runUnattended}" = 'true' ]; then

		if [ -z "$dhcpReserv" ] || [ "$dhcpReserv" -ne 1 ]; then
			local MISSING_STATIC_IPV4_SETTINGS=0

			if [ -z "$IPv4addr" ]; then
				echo "::: Missing static IP address"
				((MISSING_STATIC_IPV4_SETTINGS++))
			fi

			if [ -z "$IPv4gw" ]; then
				echo "::: Missing static IP gateway"
				((MISSING_STATIC_IPV4_SETTINGS++))
			fi

			if [ "$MISSING_STATIC_IPV4_SETTINGS" -eq 0 ]; then

				# If both settings are not empty, check if they are valid and proceed
				if validIPAndNetmask "${IPv4addr}"; then
					echo "::: Your static IPv4 address:    ${IPv4addr}"
				else
					echo "::: ${IPv4addr} is not a valid IP address"
					exit 1
				fi

				if validIP "${IPv4gw}"; then
					echo "::: Your static IPv4 gateway:    ${IPv4gw}"
				else
					echo "::: ${IPv4gw} is not a valid IP address"
					exit 1
				fi

			elif [ "$MISSING_STATIC_IPV4_SETTINGS" -eq 1 ]; then

				# If either of the settings is missing, consider the input inconsistent
				echo "::: Incomplete static IP settings"
				exit 1

			elif [ "$MISSING_STATIC_IPV4_SETTINGS" -eq 2 ]; then

				# If both of the settings are missing, assume the user wants to use current settings
				IPv4addr="${CurrentIPv4addr}"
				IPv4gw="${CurrentIPv4gw}"
				echo "::: No static IP settings, using current settings"
				echo "::: Your static IPv4 address:    ${IPv4addr}"
				echo "::: Your static IPv4 gateway:    ${IPv4gw}"

			fi
		else
			echo "::: Skipping setting static IP address"
		fi

		echo "dhcpReserv=${dhcpReserv}" >> /tmp/setupVars.conf
		echo "IPv4addr=${IPv4addr}" >> /tmp/setupVars.conf
		echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf
		return
	fi

	local ipSettingsCorrect
	local IPv4AddrValid
	local IPv4gwValid
	# Some users reserve IP addresses on another DHCP Server or on their routers,
	# Lets ask them if they want to make any changes to their interfaces.

	if (whiptail --backtitle "Calibrating network interface" --title "DHCP Reservation" --yesno \
	"Are you Using DHCP Reservation on your Router/DHCP Server?
These are your current Network Settings:

			IP address:    ${CurrentIPv4addr}
			Gateway:       ${CurrentIPv4gw}

Yes: Keep using DHCP reservation
No: Setup static IP address
Don't know what DHCP Reservation is? Answer No." ${r} ${c}); then
		dhcpReserv=1
        # shellcheck disable=SC2129
		echo "dhcpReserv=${dhcpReserv}" >> /tmp/setupVars.conf
		# We don't really need to save them as we won't set a static IP but they might be useful for debugging
		echo "IPv4addr=${CurrentIPv4addr}" >> /tmp/setupVars.conf
		echo "IPv4gw=${CurrentIPv4gw}" >> /tmp/setupVars.conf
	else
		# Ask if the user wants to use DHCP settings as their static IP
		if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?

				IP address:    ${CurrentIPv4addr}
				Gateway:       ${CurrentIPv4gw}" ${r} ${c}); then
			IPv4addr=${CurrentIPv4addr}
			IPv4gw=${CurrentIPv4gw}
			echo "IPv4addr=${IPv4addr}" >> /tmp/setupVars.conf
			echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf

			# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
			whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict.  But in most cases the router is smart enough to not do that.
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." ${r} ${c}
			# Nothing else to do since the variables are already set above
		else
			# Otherwise, we need to ask the user to input their desired settings.
			# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
			# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
			until [[ ${ipSettingsCorrect} = True ]]; do

				until [[ ${IPv4AddrValid} = True ]]; do
					# Ask for the IPv4 address
					if IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" ${r} ${c} "${CurrentIPv4addr}" 3>&1 1>&2 2>&3) ; then
						if validIPAndNetmask "${IPv4addr}"; then
							echo "::: Your static IPv4 address:    ${IPv4addr}"
							IPv4AddrValid=True
						else
							whiptail --msgbox --backtitle "Calibrating network interface" --title "IPv4 address" "You entered an invalid IPv4 address.\\n\\nPlease enter an IP address in the CIDR notation, example: 192.168.23.211/24.\\n\\nIf you are not sure, please just keep the default." ${r} ${c}
							echo "::: Invalid IPv4 address:    ${IPv4addr}"
							IPv4AddrValid=False
						fi
					else
						# Cancelling IPv4 settings window
						echo "::: Cancel selected. Exiting..."
						exit 1
					fi
				done

				until [[ ${IPv4gwValid} = True ]]; do
					# Ask for the gateway
					if IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" ${r} ${c} "${CurrentIPv4gw}" 3>&1 1>&2 2>&3) ; then
						if validIP "${IPv4gw}"; then
							echo "::: Your static IPv4 gateway:    ${IPv4gw}"
							IPv4gwValid=True
						else
							whiptail --msgbox --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" "You entered an invalid IPv4 address.\\n\\nPlease enter the IP address of your gateway (router), example: 192.168.23.1.\\n\\nIf you are not sure, please just keep the default." ${r} ${c}
							echo "::: Invalid IPv4 gateway:    ${IPv4gw}"
							IPv4gwValid=False
						fi
					else
						# Cancelling gateway settings window
						echo "::: Cancel selected. Exiting..."
						exit 1
					fi
				done

				# Give the user a chance to review their settings before moving on
				if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?

						IP address:    ${IPv4addr}
						Gateway:       ${IPv4gw}" ${r} ${c}); then
					# If the settings are correct, then we need to set the pivpnIP
					echo "IPv4addr=${IPv4addr}" >> /tmp/setupVars.conf
					echo "IPv4gw=${IPv4gw}" >> /tmp/setupVars.conf
					# After that's done, the loop ends and we move on
					ipSettingsCorrect=True
				else
					# If the settings are wrong, the loop continues
					ipSettingsCorrect=False
					IPv4AddrValid=False
					IPv4gwValid=False
				fi
			done
			# End the if statement for DHCP vs. static
		fi
		# End of If Statement for DCHCP Reservation
	fi
}

setDHCPCD(){
	# Append these lines to dhcpcd.conf to enable a static IP
	echo "interface ${IPv4dev}
	static ip_address=${IPv4addr}
	static routers=${IPv4gw}
	static domain_name_servers=${IPv4dns}" | $SUDO tee -a ${dhcpcdFile} >/dev/null
}

setStaticIPv4(){
	# Tries to set the IPv4 address
	if [[ -f /etc/dhcpcd.conf ]]; then
		if grep -q "${IPv4addr}" ${dhcpcdFile}; then
			echo "::: Static IP already configured."
		else
			setDHCPCD
			$SUDO ip addr replace dev "${IPv4dev}" "${IPv4addr}"
			echo ":::"
			echo "::: Setting IP to ${IPv4addr}.  You may need to restart after the install is complete."
			echo ":::"
		fi
	else
		echo "::: Critical: Unable to locate configuration file to set static IPv4 address!"
		exit 1
	fi
}

chooseUser(){
	if [ "${runUnattended}" = 'true' ]; then
		if [ -z "$install_user" ]; then
			if [ "$(awk -F':' 'BEGIN {count=0} $3>=1000 && $3<=60000 { count++ } END{ print count }' /etc/passwd)" -eq 1 ]; then
				install_user="$(awk -F':' '$3>=1000 && $3<=60000 {print $1}' /etc/passwd)"
				echo "::: No user specified, but only ${install_user} is available, using it"
			else
				echo "::: No user specified"
				exit 1
			fi
		else
			if awk -F':' '$3>=1000 && $3<=60000 {print $1}' /etc/passwd | grep -qw "${install_user}"; then
				echo "::: ${install_user} will hold your ovpn configurations."
			else
				echo "::: User ${install_user} does not exist, creating..."
				$SUDO useradd -m -s /bin/bash "${install_user}"
				echo "::: User created without a password, please do sudo passwd $install_user to create one"
			fi
		fi
		install_home=$(grep -m1 "^${install_user}:" /etc/passwd | cut -d: -f6)
		install_home=${install_home%/}
		echo "install_user=${install_user}" >> /tmp/setupVars.conf
		echo "install_home=${install_home}" >> /tmp/setupVars.conf
		return
	fi

	# Explain the local user
	whiptail --msgbox --backtitle "Parsing User List" --title "Local Users" "Choose a local user that will hold your ovpn configurations." ${r} ${c}
	# First, let's check if there is a user available.
	numUsers=$(awk -F':' 'BEGIN {count=0} $3>=1000 && $3<=60000 { count++ } END{ print count }' /etc/passwd)
	if [ "$numUsers" -eq 0 ]
	then
		# We don't have a user, let's ask to add one.
		if userToAdd=$(whiptail --title "Choose A User" --inputbox "No non-root user account was found. Please type a new username." ${r} ${c} 3>&1 1>&2 2>&3)
		then
			# See https://askubuntu.com/a/667842/459815
			PASSWORD=$(whiptail  --title "password dialog" --passwordbox "Please enter the new user password" ${r} ${c} 3>&1 1>&2 2>&3)
			CRYPT=$(perl -e 'printf("%s\n", crypt($ARGV[0], "password"))' "${PASSWORD}")
			if $SUDO useradd -m -p "${CRYPT}" -s /bin/bash "${userToAdd}" ; then
				echo "Succeeded"
				((numUsers+=1))
			else
				exit 1
			fi
		else
			exit 1
		fi
	fi
	availableUsers=$(awk -F':' '$3>=1000 && $3<=60000 {print $1}' /etc/passwd)
	local userArray=()
	local firstloop=1

	while read -r line
	do
		mode="OFF"
		if [[ $firstloop -eq 1 ]]; then
			firstloop=0
			mode="ON"
		fi
		userArray+=("${line}" "" "${mode}")
	done <<< "${availableUsers}"
	chooseUserCmd=(whiptail --title "Choose A User" --separate-output --radiolist
  "Choose (press space to select):" "${r}" "${c}" "${numUsers}")
	if chooseUserOptions=$("${chooseUserCmd[@]}" "${userArray[@]}" 2>&1 >/dev/tty) ; then
		for desiredUser in ${chooseUserOptions}; do
			install_user=${desiredUser}
			echo "::: Using User: $install_user"
			install_home=$(grep -m1 "^${install_user}:" /etc/passwd | cut -d: -f6)
			install_home=${install_home%/} # remove possible trailing slash
			echo "install_user=${install_user}" >> /tmp/setupVars.conf
			echo "install_home=${install_home}" >> /tmp/setupVars.conf
		done
	else
		echo "::: Cancel selected, exiting...."
		exit 1
	fi
}

isRepo(){
	# If the directory does not have a .git folder it is not a repo
	echo -n ":::    Checking $1 is a repo..."
	cd "${1}" &> /dev/null || return 1
	$SUDO git status &> /dev/null && echo " OK!"; return 0 || echo " not found!"; return 1
}

updateRepo(){
	if [ "${UpdateCmd}" = "Repair" ]; then
		echo "::: Repairing an existing installation, not downloading/updating local repos"
	else
		# Pull the latest commits
		echo -n ":::     Updating repo in $1..."
		### FIXME: Never call rm -rf with a plain variable. Never again as SU!
		#$SUDO rm -rf "${1}"
		if test -n "$1"; then
			$SUDO rm -rf "$(dirname "$1")/.pivpn"
		fi
		# Go back to /etc otherwise git will complain when the current working
		# directory has just been deleted (/etc/.pivpn).
		cd /etc && \
		$SUDO git clone -q --depth 1 --no-single-branch "${2}" "${1}" > /dev/null & spinner $!
		cd "${1}" || exit 1
		if [ -z "${TESTING+x}" ]; then
			:
		else
			${SUDOE} git checkout test
		fi
		echo " done!"
	fi
}

makeRepo(){
	# Remove the non-repos interface and clone the interface
	echo -n ":::    Cloning $2 into $1..."
	### FIXME: Never call rm -rf with a plain variable. Never again as SU!
	#$SUDO rm -rf "${1}"
	if test -n "$1"; then
		$SUDO rm -rf "$(dirname "$1")/.pivpn"
	fi
	# Go back to /etc otherwhise git will complain when the current working
	# directory has just been deleted (/etc/.pivpn).
	cd /etc && \
	$SUDO git clone -q --depth 1 --no-single-branch "${2}" "${1}" > /dev/null & spinner $!
	cd "${1}" || exit 1
	if [ -z "${TESTING+x}" ]; then
		:
	else
		${SUDOE} git checkout test
	fi
	echo " done!"
}

getGitFiles(){
	# Setup git repos for base files
	echo ":::"
	echo "::: Checking for existing base files..."
	if isRepo "${1}"; then
		updateRepo "${1}" "${2}"
	else
		makeRepo "${1}" "${2}"
	fi
}

cloneOrUpdateRepos(){
	# Get Git files
	getGitFiles ${pivpnFilesDir} ${pivpnGitUrl} || \
	{ echo "!!! Unable to clone ${pivpnGitUrl} into ${pivpnFilesDir}, unable to continue."; \
	exit 1; \
}
}

installPiVPN(){
	$SUDO mkdir -p /etc/pivpn/
	askWhichVPN

	if [ "$VPN" = "openvpn" ]; then
		installOpenVPN
		askCustomProto
		askCustomPort
		askClientDNS
		askCustomDomain
		askPublicIPOrDNS
		askEncryption
		confOpenVPN
		confOVPN
		confNetwork
		confLogging
	elif [ "$VPN" = "wireguard" ]; then
		installWireGuard
		askCustomPort
		askClientDNS
		askPublicIPOrDNS
		confWireGuard
		confNetwork
	fi
}

askWhichVPN(){
	if [ "${runUnattended}" = 'true' ]; then
		if [ -z "$VPN" ]; then
			echo ":: No VPN protocol specified, using WireGuard"
			VPN="wireguard"
		else
			VPN="${VPN,,}"
			if [ "$VPN" = "wireguard" ]; then
				echo "::: WireGuard will be installed"
			elif [ "$VPN" = "openvpn" ]; then
				echo "::: OpenVPN will be installed"
			else
				echo ":: $VPN is not a supported VPN protocol, please specify 'wireguard' or 'openvpn'"
				exit 1
			fi
		fi
	else
		chooseVPNCmd=(whiptail --backtitle "Setup PiVPN" --title "Installation mode" --separate-output --radiolist "WireGuard is a new kind of VPN that provides near-istantaneous connection speed, high performance, modern cryptography.\\n\\nIt's the recommended choice expecially if you use mobile devices where WireGuard is easier on battery than OpenVPN.\\n\\nOpenVPN is still available if you need the traditional, flexible, trusted VPN protocol. Or if you need features like TCP and custom search domain.\\n\\nChoose a VPN (press space to select):" "${r}" "${c}" 2)
		VPNChooseOptions=(WireGuard "" on
							OpenVPN "" off)

		if VPN=$("${chooseVPNCmd[@]}" "${VPNChooseOptions[@]}" 2>&1 >/dev/tty) ; then
			echo "::: Using VPN: $VPN"
			VPN="${VPN,,}"
		else
			echo "::: Cancel selected, exiting...."
			exit 1
		fi
	fi

	if [ "$VPN" = "wireguard" ]; then
		pivpnPROTO="udp"
		pivpnDEV="wg0"
		pivpnNET="10.6.0.0"
	elif [ "$VPN" = "openvpn" ]; then
		pivpnDEV="tun0"
		pivpnNET="10.8.0.0"
	fi
	vpnGw="${pivpnNET/.0.0/.0.1}"

	echo "VPN=${VPN}" >> /tmp/setupVars.conf
}

installOpenVPN(){
	local PIVPN_DEPS

	if [ "$PLAT" = "Debian" ] || [ "$PLAT" = "Ubuntu" ]; then
		echo "::: Adding OpenVPN repository... "
		# gnupg is used to add the openvpn PGP key to the APT keyring
		PIVPN_DEPS=(gnupg)
		installDependentPackages PIVPN_DEPS[@]
		wget -qO- https://swupdate.openvpn.net/repos/repo-public.gpg | $SUDO apt-key add -
		echo "deb https://build.openvpn.net/debian/openvpn/stable $OSCN main" | $SUDO tee /etc/apt/sources.list.d/pivpn-openvpn-repo.list > /dev/null
		echo "::: Updating package cache..."
		# shellcheck disable=SC2086
		$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $!
	fi

	echo "::: Installing OpenVPN from Debian package... "
	# grepcidr is used to redact IPs in the debug log whereas expect is used
	# to feed easy-rsa with passwords
	PIVPN_DEPS=(openvpn grepcidr expect)
	installDependentPackages PIVPN_DEPS[@]
}

installWireGuard(){
	local PIVPN_DEPS

	if [ "$PLAT" = "Raspbian" ]; then

		# If this Raspberry Pi uses armv7l we can use the package from the repo
		# https://lists.zx2c4.com/pipermail/wireguard/2017-November/001885.html
		# Otherwhise compile and build the kernel module via DKMS (so it will
		# be recompiled on kernel upgrades)

		if [ "$(uname -m)" = "armv7l" ]; then

			echo "::: Installing WireGuard from Debian package... "
			# dirmngr is used to download repository keys, whereas qrencode is used to generate qrcodes
			# from config file, for use with mobile clients
			PIVPN_DEPS=(dirmngr qrencode)
			installDependentPackages PIVPN_DEPS[@]
			# Do not upgrade packages from the unstable repository except for wireguard
			echo "::: Adding Debian repository... "
			echo "deb https://deb.debian.org/debian/ unstable main" | $SUDO tee /etc/apt/sources.list.d/pivpn-unstable.list > /dev/null
			printf 'Package: *\nPin: release a=unstable\nPin-Priority: 1\n\nPackage: wireguard wireguard-dkms wireguard-tools\nPin: release a=unstable\nPin-Priority: 500\n' | $SUDO tee /etc/apt/preferences.d/pivpn-limit-unstable > /dev/null

			$SUDO apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 04EE7237B7D453EC 648ACFD622F3D138
			echo "::: Updating package cache..."
			# shellcheck disable=SC2086
			$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $!
			PIVPN_DEPS=(raspberrypi-kernel-headers wireguard wireguard-tools wireguard-dkms)
			installDependentPackages PIVPN_DEPS[@]

		elif [ "$(uname -m)" = "armv6l" ]; then

			echo "::: Installing WireGuard from source... "
			PIVPN_DEPS=(checkinstall dkms libmnl-dev libelf-dev raspberrypi-kernel-headers build-essential pkg-config qrencode jq)
			installDependentPackages PIVPN_DEPS[@]

			# Delete any leftover code
			$SUDO rm -rf /usr/src/wireguard-*

			WG_TOOLS_SNAPSHOT="$(curl -s https://build.wireguard.com/distros.json | jq -r '."upstream-tools"."version"')"
			WG_TOOLS_SOURCE="https://git.zx2c4.com/wireguard-tools/snapshot/wireguard-tools-${WG_TOOLS_SNAPSHOT}.tar.xz"

			echo "::: Downloading wireguard-tools source code... "
			wget -qO- "${WG_TOOLS_SOURCE}" | $SUDO tar xJ --directory /usr/src
			echo "done!"

			##  || exits if cd fails.
			cd /usr/src/wireguard-tools-"${WG_TOOLS_SNAPSHOT}/src" || exit 1

			# We install the userspace tools manually since DKMS only compiles and
			# installs the kernel module
			echo "::: Compiling WireGuard tools... "
			if $SUDO make; then
				echo "done!"
			else
				echo "failed!"
				exit 1
			fi

			# Use checkinstall to install userspace tools so if the user wants to uninstall
			# PiVPN we can just do apt remove wireguard-tools, instead of manually removing
			# files from the file system
			echo "::: Installing WireGuard tools... "
			if $SUDO checkinstall --pkgname wireguard-tools --pkgversion "${WG_TOOLS_SNAPSHOT}" -y; then
				INSTALLED_PACKAGES+=("wireguard-tools")
				echo "done!"
			else
				echo "failed!"
				exit 1
			fi

			echo "WG_TOOLS_SNAPSHOT=${WG_TOOLS_SNAPSHOT}" >> /tmp/setupVars.conf

			WG_MODULE_SNAPSHOT="$(curl -s https://build.wireguard.com/distros.json | jq -r '."upstream-linuxcompat"."version"')"
			WG_MODULE_SOURCE="https://git.zx2c4.com/wireguard-linux-compat/snapshot/wireguard-linux-compat-${WG_MODULE_SNAPSHOT}.tar.xz"

			echo "::: Downloading wireguard-linux-compat source code... "
			wget -qO- "${WG_MODULE_SOURCE}" | $SUDO tar xJ --directory /usr/src
			echo "done!"

			# Rename wireguard-linux-compat folder and move the source code to the parent folder
			# such that dkms picks up the module when referencing wireguard/"${WG_MODULE_SNAPSHOT}"
			cd /usr/src && \
			$SUDO mv wireguard-linux-compat-"${WG_MODULE_SNAPSHOT}" wireguard-"${WG_MODULE_SNAPSHOT}" && \
			cd wireguard-"${WG_MODULE_SNAPSHOT}" && \
			$SUDO mv src/* . && \
			$SUDO rmdir src || exit 1

			echo "::: Adding WireGuard modules via DKMS... "
			if $SUDO dkms add wireguard/"${WG_MODULE_SNAPSHOT}"; then
				echo "done!"
			else
				echo "failed!"
				$SUDO dkms remove wireguard/"${WG_MODULE_SNAPSHOT}" --all
				exit 1
			fi

			echo "::: Compiling WireGuard modules via DKMS... "
			if $SUDO dkms build wireguard/"${WG_MODULE_SNAPSHOT}"; then
				echo "done!"
			else
				echo "failed!"
				$SUDO dkms remove wireguard/"${WG_MODULE_SNAPSHOT}" --all
				exit 1
			fi

			echo "::: Installing WireGuard modules via DKMS... "
			if $SUDO dkms install wireguard/"${WG_MODULE_SNAPSHOT}"; then
				INSTALLED_PACKAGES+=("wireguard-dkms")
				echo "done!"
			else
				echo "failed!"
				$SUDO dkms remove wireguard/"${WG_MODULE_SNAPSHOT}" --all
				exit 1
			fi

			echo "WG_MODULE_SNAPSHOT=${WG_MODULE_SNAPSHOT}" >> /tmp/setupVars.conf

		fi

	elif [ "$PLAT" = "Debian" ]; then

		echo "::: Installing WireGuard from Debian package... "
		echo "::: Adding Debian repository... "
		echo "deb https://deb.debian.org/debian/ unstable main" | $SUDO tee /etc/apt/sources.list.d/pivpn-unstable.list > /dev/null
		printf 'Package: *\nPin: release a=unstable\nPin-Priority: 90\n' | $SUDO tee /etc/apt/preferences.d/pivpn-limit-unstable > /dev/null
		echo "::: Updating package cache..."
		# shellcheck disable=SC2086
		$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $!
		PIVPN_DEPS=(linux-headers-amd64 qrencode wireguard wireguard-tools wireguard-dkms)
		installDependentPackages PIVPN_DEPS[@]

	elif [ "$PLAT" = "Ubuntu" ]; then

		echo "::: Installing WireGuard from PPA... "
		$SUDO add-apt-repository ppa:wireguard/wireguard -y
		echo "::: Updating package cache..."
		# shellcheck disable=SC2086
		$SUDO ${UPDATE_PKG_CACHE} &> /dev/null & spinner $!
		PIVPN_DEPS=(qrencode wireguard wireguard-tools wireguard-dkms linux-headers-generic)
		installDependentPackages PIVPN_DEPS[@]

	fi
}

askCustomProto(){
	if [ "${runUnattended}" = 'true' ]; then
		if [ -z "$pivpnPROTO" ]; then
			echo "::: No TCP/IP protocol specified, using the default protocol udp"
			pivpnPROTO="udp"
		else
			pivpnPROTO="${pivpnPROTO,,}"
			if [ "$pivpnPROTO" = "udp" ] || [ "$pivpnPROTO" = "tcp" ]; then
				echo "::: Using the $pivpnPROTO protocol"
			else
				echo ":: $pivpnPROTO is not a supported TCP/IP protocol, please specify 'udp' or 'tcp'"
				exit 1
			fi
		fi
		echo "pivpnPROTO=${pivpnPROTO}" >> /tmp/setupVars.conf
		return
	fi

	# Set the available protocols into an array so it can be used with a whiptail dialog
	if pivpnPROTO=$(whiptail --title "Protocol" --radiolist \
		"Choose a protocol (press space to select). Please only choose TCP if you know why you need TCP." ${r} ${c} 2 \
		"UDP" "" ON \
		"TCP" "" OFF 3>&1 1>&2 2>&3)
	then
		# Convert option into lowercase (UDP->udp)
		pivpnPROTO="${pivpnPROTO,,}"
		echo "::: Using protocol: $pivpnPROTO"
		echo "pivpnPROTO=${pivpnPROTO}" >> /tmp/setupVars.conf
	else
		echo "::: Cancel selected, exiting...."
		exit 1
	fi
}

askCustomPort(){
	if [ "${runUnattended}" = 'true' ]; then
		if [ -z "$pivpnPORT" ]; then
			if [ "$VPN" = "wireguard" ]; then
				echo "::: No port specified, using the default port 51820"
				pivpnPORT=51820
			elif [ "$VPN" = "openvpn" ]; then
				if [ "$pivpnPROTO" = "udp" ]; then
					echo "::: No port specified, using the default port 1194"
					pivpnPORT=1194
				elif [ "$pivpnPROTO" = "tcp" ]; then
					echo "::: No port specified, using the default port 443"
					pivpnPORT=443
				fi
			fi
		else
			if [[ "$pivpnPORT" =~ ^[0-9]+$ ]] && [ "$pivpnPORT" -ge 1 ] && [ "$pivpnPORT" -le 65535 ]; then
				echo "::: Using port $pivpnPORT"
			else
				echo "::: $pivpnPORT is not a valid port, use a port within the range [1,65535] (inclusive)"
				exit 1
			fi
		fi
		echo "pivpnPORT=${pivpnPORT}" >> /tmp/setupVars.conf
		return
	fi

	until [[ $PORTNumCorrect = True ]]
		do
			portInvalid="Invalid"

			if [ "$VPN" = "wireguard" ]; then
				DEFAULT_PORT=51820
			elif [ "$VPN" = "openvpn" ]; then
				if [ "$pivpnPROTO" = "udp" ]; then
					DEFAULT_PORT=1194
				else
					DEFAULT_PORT=443
				fi
			fi

			if pivpnPORT=$(whiptail --title "Default $VPN Port" --inputbox "You can modify the default $VPN port. \\nEnter a new value or hit 'Enter' to retain the default" ${r} ${c} $DEFAULT_PORT 3>&1 1>&2 2>&3)
			then
				if [[ "$pivpnPORT" =~ ^[0-9]+$ ]] && [ "$pivpnPORT" -ge 1 ] && [ "$pivpnPORT" -le 65535 ]; then
					:
				else
					pivpnPORT=$portInvalid
				fi
			else
				echo "::: Cancel selected, exiting...."
				exit 1
			fi

			if [[ $pivpnPORT == "$portInvalid" ]]; then
				whiptail --msgbox --backtitle "Invalid Port" --title "Invalid Port" "You entered an invalid Port number.\\n    Please enter a number from 1 - 65535.\\n    If you are not sure, please just keep the default." ${r} ${c}
				PORTNumCorrect=False
			else
				if (whiptail --backtitle "Specify Custom Port" --title "Confirm Custom Port Number" --yesno "Are these settings correct?\\n    PORT:   $pivpnPORT" ${r} ${c}) then
					PORTNumCorrect=True
				else
					# If the settings are wrong, the loop continues
					PORTNumCorrect=False
				fi
			fi
		done
	# write out the port
	echo "pivpnPORT=${pivpnPORT}" >> /tmp/setupVars.conf
}

askClientDNS(){
	if [ "${runUnattended}" = 'true' ]; then

		if [ -z "$pivpnDNS1" ] && [ -n "$pivpnDNS2" ]; then
			pivpnDNS1="$pivpnDNS2"
			unset pivpnDNS2
		elif [ -z "$pivpnDNS1" ] && [ -z "$pivpnDNS2" ]; then
			pivpnDNS1="9.9.9.9"
			pivpnDNS2="149.112.112.112"
			echo "::: No DNS provider specified, using Quad9 DNS ($pivpnDNS1 $pivpnDNS2)"
		fi

		local INVALID_DNS_SETTINGS=0

		if ! validIP "$pivpnDNS1"; then
			INVALID_DNS_SETTINGS=1
			echo "::: Invalid DNS $pivpnDNS1"
		fi

		if [ -n "$pivpnDNS2" ] && ! validIP "$pivpnDNS2"; then
			INVALID_DNS_SETTINGS=1
			echo "::: Invalid DNS $pivpnDNS2"
		fi

		if [ "$INVALID_DNS_SETTINGS" -eq 0 ]; then
			echo "::: Using DNS $pivpnDNS1 $pivpnDNS2"
		else
			exit 1
		fi

		echo "pivpnDNS1=${pivpnDNS1}" >> /tmp/setupVars.conf
		echo "pivpnDNS2=${pivpnDNS2}" >> /tmp/setupVars.conf
		return
	fi

	# Detect and offer to use Pi-hole
	if command -v pihole > /dev/null; then
		if (whiptail --backtitle "Setup PiVPN" --title "Pi-hole" --yesno "We have detected a Pi-hole installation, do you want to use it as the DNS server for the VPN, so you get ad blocking on the go?" ${r} ${c}); then
			pivpnDNS1="$vpnGw"
			echo "interface=$pivpnDEV" | $SUDO tee /etc/dnsmasq.d/02-pivpn.conf > /dev/null
			echo "pivpnDNS1=${pivpnDNS1}" >> /tmp/setupVars.conf
			echo "pivpnDNS2=${pivpnDNS2}" >> /tmp/setupVars.conf
			return
		fi
	fi

	DNSChoseCmd=(whiptail --separate-output --radiolist "Select the DNS Provider
  for your VPN Clients (press space to select). To use your own, select
	Custom.\\n\\nIn case you have a local resolver running, i.e. unbound, select
	\"PiVPN-is-local-DNS\" and make sure your resolver is listening on
	\"$vpnGw\", allowing requests from \"${pivpnNET}/${subnetClass}\"." "${r}" "${c}" 6)
	DNSChooseOptions=(Quad9 "" on
			OpenDNS "" off
			Level3 "" off
			DNS.WATCH "" off
			Norton "" off
			FamilyShield "" off
			CloudFlare "" off
			Google "" off
			PiVPN-is-local-DNS "" off
			Custom "" off)

	if DNSchoices=$("${DNSChoseCmd[@]}" "${DNSChooseOptions[@]}" 2>&1 >/dev/tty)
	then

		if [[ ${DNSchoices} != "Custom" ]]; then

			echo "::: Using ${DNSchoices} servers."
			declare -A DNS_MAP=(["Quad9"]="9.9.9.9 149.112.112.112"
								["OpenDNS"]="208.67.222.222 208.67.220.220"
								["Level3"]="209.244.0.3 209.244.0.4"
								["DNS.WATCH"]="84.200.69.80 84.200.70.40"
								["Norton"]="199.85.126.10 199.85.127.10"
								["FamilyShield"]="208.67.222.123 208.67.220.123"
								["CloudFlare"]="1.1.1.1 1.0.0.1"
								["Google"]="8.8.8.8 8.8.4.4"
								["PiVPN-is-local-DNS"]="$vpnGw")

			pivpnDNS1=$(awk '{print $1}' <<< "${DNS_MAP["${DNSchoices}"]}")
			pivpnDNS2=$(awk '{print $2}' <<< "${DNS_MAP["${DNSchoices}"]}")

		else

			until [[ $DNSSettingsCorrect = True ]]; do
				strInvalid="Invalid"

				if pivpnDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)" --inputbox "Enter your desired upstream DNS provider(s), separated by a comma.\\n\\nFor example '1.1.1.1, 9.9.9.9'" ${r} ${c} "" 3>&1 1>&2 2>&3)
				then
					pivpnDNS1=$(echo "$pivpnDNS" | sed 's/[, \t]\+/,/g' | awk -F, '{print$1}')
					pivpnDNS2=$(echo "$pivpnDNS" | sed 's/[, \t]\+/,/g' | awk -F, '{print$2}')
					if ! validIP "$pivpnDNS1" || [ ! "$pivpnDNS1" ]; then
						pivpnDNS1=$strInvalid
					fi
					if ! validIP "$pivpnDNS2" && [ "$pivpnDNS2" ]; then
						pivpnDNS2=$strInvalid
					fi
				else
					echo "::: Cancel selected, exiting...."
					exit 1
				fi

				if [[ $pivpnDNS1 == "$strInvalid" ]] || [[ $pivpnDNS2 == "$strInvalid" ]]; then
					whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\\n\\n    DNS Server 1:   $pivpnDNS1\\n    DNS Server 2:   $pivpnDNS2" ${r} ${c}
					if [[ $pivpnDNS1 == "$strInvalid" ]]; then
						pivpnDNS1=""
					fi
					if [[ $pivpnDNS2 == "$strInvalid" ]]; then
						pivpnDNS2=""
					fi
					DNSSettingsCorrect=False
				else
					if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\\n    DNS Server 1:   $pivpnDNS1\\n    DNS Server 2:   $pivpnDNS2" ${r} ${c}) then
						DNSSettingsCorrect=True
					else
						# If the settings are wrong, the loop continues
						DNSSettingsCorrect=False
					fi
				fi
			done
		fi

	else
		echo "::: Cancel selected. Exiting..."
		exit 1
	fi

	echo "pivpnDNS1=${pivpnDNS1}" >> /tmp/setupVars.conf
	echo "pivpnDNS2=${pivpnDNS2}" >> /tmp/setupVars.conf
}

#Call this function to use a regex to check user input for a valid custom domain
validDomain(){
  local domain=$1
  local stat=1

  if [[ $domain =~ ^(([a-zA-Z0-9]{1,63}|([a-zA-Z0-9]{1,60}[-a-zA-Z0-9()]{0,2}[a-zA-Z0-9]{1,60}))\.){1,6}([a-zA-Z]{2,})$ ]]; then
	stat=$?
  fi
  return $stat
}

#This procedure allows a user to specify a custom search domain if they have one.
askCustomDomain(){
	if [ "${runUnattended}" = 'true' ]; then
		if [ -n "$pivpnSEARCHDOMAIN" ]; then
			if validDomain "$pivpnSEARCHDOMAIN"; then
				echo "::: Using custom domain $pivpnSEARCHDOMAIN"
			else
				echo "::: Custom domain $pivpnSEARCHDOMAIN is not valid"
				exit 1
			fi
		else
			echo "::: Skipping custom domain"
		fi
		echo "pivpnSEARCHDOMAIN=${pivpnSEARCHDOMAIN}" >> /tmp/setupVars.conf
		return
	fi

	DomainSettingsCorrect=False

	if (whiptail --backtitle "Custom Search Domain" --title "Custom Search Domain" --yesno --defaultno "Would you like to add a custom search domain? \\n (This is only for advanced users who have their own domain)\\n" ${r} ${c}); then

		until [[ $DomainSettingsCorrect = True ]]
		do
			if pivpnSEARCHDOMAIN=$(whiptail --inputbox "Enter Custom Domain\\nFormat: mydomain.com" ${r} ${c} --title "Custom Domain" 3>&1 1>&2 2>&3); then
				if validDomain "$pivpnSEARCHDOMAIN"; then
					if (whiptail --backtitle "Custom Search Domain" --title "Custom Search Domain" --yesno "Are these settings correct?\\n    Custom Search Domain: $pivpnSEARCHDOMAIN" ${r} ${c}); then
						DomainSettingsCorrect=True
					else
						# If the settings are wrong, the loop continues
						DomainSettingsCorrect=False
					fi
				else
					whiptail --msgbox --backtitle "Invalid Domain" --title "Invalid Domain" "Domain is invalid. Please try again.\\n\\n    DOMAIN:   $pivpnSEARCHDOMAIN\\n" ${r} ${c}
					DomainSettingsCorrect=False
				fi
			else
				echo "::: Cancel selected. Exiting..."
				exit 1
			fi
		done
	fi

	echo "pivpnSEARCHDOMAIN=${pivpnSEARCHDOMAIN}" >> /tmp/setupVars.conf
}

askPublicIPOrDNS(){
	if ! IPv4pub=$(dig +short myip.opendns.com @208.67.222.222) || ! validIP "$IPv4pub"; then
		echo "dig failed, now trying to curl checkip.amazonaws.com"
		if ! IPv4pub=$(curl -s https://checkip.amazonaws.com) || ! validIP "$IPv4pub"; then
			echo "checkip.amazonaws.com failed, please check your internet connection/DNS"
			exit 1
		fi
	fi

	if [ "${runUnattended}" = 'true' ]; then
		if [ -z "$pivpnHOST" ]; then
			echo "::: No IP or domain name specified, using public IP $IPv4pub"
			pivpnHOST="$IPv4pub"
		else
			if validIP "$pivpnHOST"; then
				echo "::: Using public IP $pivpnHOST"
			elif validDomain "$pivpnHOST"; then
				echo "::: Using domain name $pivpnHOST"
			else
				echo "::: $pivpnHOST is not a valid IP or domain name"
				exit 1
			fi
		fi
		echo "pivpnHOST=${pivpnHOST}" >> /tmp/setupVars.conf
		return
	fi

	METH=$(whiptail --title "Public IP or DNS" --radiolist "Will clients use a Public IP or DNS Name to connect to your server (press space to select)?" ${r} ${c} 2 \
		"$IPv4pub" "Use this public IP" "ON" \
		"DNS Entry" "Use a public DNS" "OFF" 3>&1 1>&2 2>&3)

	exitstatus=$?
	if [ $exitstatus != 0 ]; then
		echo "::: Cancel selected. Exiting..."
		exit 1
	fi

	if [ "$METH" == "$IPv4pub" ]; then
		pivpnHOST="${IPv4pub}"
	else
		until [[ $publicDNSCorrect = True ]]
		do
			PUBLICDNS=$(whiptail --title "PiVPN Setup" --inputbox "What is the public DNS name of this Server?" ${r} ${c} 3>&1 1>&2 2>&3)
			exitstatus=$?
			if [ $exitstatus != 0 ]; then
			echo "::: Cancel selected. Exiting..."
			exit 1
			fi
			if (whiptail --backtitle "Confirm DNS Name" --title "Confirm DNS Name" --yesno "Is this correct?\\n\\n Public DNS Name:  $PUBLICDNS" ${r} ${c}) then
				publicDNSCorrect=True
				pivpnHOST="${PUBLICDNS}"
			else
				publicDNSCorrect=False
			fi
		done
	fi

	echo "pivpnHOST=${pivpnHOST}" >> /tmp/setupVars.conf
}

askEncryption(){
	if [ "${runUnattended}" = 'true' ]; then

		if [ -z "$TWO_POINT_FOUR" ] || [ "$TWO_POINT_FOUR" -eq 1 ]; then
			TWO_POINT_FOUR=1
			echo "::: Using OpenVPN 2.4 features"

			if [ -z "$pivpnENCRYPT" ]; then
				pivpnENCRYPT=256
				echo "::: Using a 256 bit certificate"
			else
				if [ "$pivpnENCRYPT" -eq 256 ] || [ "$pivpnENCRYPT" -eq 384 ] || [ "$pivpnENCRYPT" -eq 521 ]; then
					echo "::: Using a ${pivpnENCRYPT}-bit certificate"
				else
					echo "::: ${pivpnENCRYPT} is not a valid certificate size, use 256, 384, or 521"
					exit 1
				fi
			fi
		else
			TWO_POINT_FOUR=0
			echo "::: Using traditional OpenVPN configuration"

			if [ -z "$pivpnENCRYPT" ]; then
				pivpnENCRYPT=2048
				echo "::: Using a 2048 bit certificate"
			else
				if [ "$pivpnENCRYPT" -eq 2048 ] || [ "$pivpnENCRYPT" -eq 3072 ] || [ "$pivpnENCRYPT" -eq 4096 ]; then
					echo "::: Using a ${pivpnENCRYPT}-bit certificate"
				else
					echo "::: ${pivpnENCRYPT} is not a valid certificate size, use 2048, 3072, or 4096"
					exit 1
				fi
			fi

			if [ -z "$DOWNLOAD_DH_PARAM" ] || [ "$DOWNLOAD_DH_PARAM" -ne 1 ]; then
				DOWNLOAD_DH_PARAM=0
				echo "::: DH parameters will be generated locally"
			else
				echo "::: DH parameters will be downloaded from \"2 Ton Digital\""
			fi
		fi

		echo "TWO_POINT_FOUR=${TWO_POINT_FOUR}" >> /tmp/setupVars.conf
		echo "pivpnENCRYPT=${pivpnENCRYPT}" >> /tmp/setupVars.conf
		echo "DOWNLOAD_DH_PARAM=${DOWNLOAD_DH_PARAM}" >> /tmp/setupVars.conf
		return
	fi

	if (whiptail --backtitle "Setup OpenVPN" --title "Installation mode" --yesno "OpenVPN 2.4 can take advantage of Elliptic Curves to provide higher connection speed and improved security over RSA, while keeping smaller certificates.\\n\\nMoreover, the 'tls-crypt' directive encrypts the certificates being used while authenticating, increasing privacy.\\n\\nIf your clients do run OpenVPN 2.4 or later you can enable these features, otherwise choose 'No' for best compatibility." "${r}" "${c}"); then
		TWO_POINT_FOUR=1
		pivpnENCRYPT=$(whiptail --backtitle "Setup OpenVPN" --title "ECDSA certificate size" --radiolist \
			"Choose the desired size of your certificate (press space to select):\\nThis is a certificate that will be generated on your system. The larger the certificate, the more time this will take. For most applications, it is recommended to use 256 bits. You can increase the number of bits if you care about, however, consider that 256 bits are already as secure as 3072 bit RSA." ${r} ${c} 3 \
			"256" "Use a 256-bit certificate (recommended level)" ON \
			"384" "Use a 384-bit certificate" OFF \
			"521" "Use a 521-bit certificate (paranoid level)" OFF 3>&1 1>&2 2>&3)
	else
		TWO_POINT_FOUR=0
		pivpnENCRYPT=$(whiptail --backtitle "Setup OpenVPN" --title "RSA certificate size" --radiolist \
			"Choose the desired size of your certificate (press space to select):\\nThis is a certificate that will be generated on your system. The larger the certificate, the more time this will take. For most applications, it is recommended to use 2048 bits. If you are paranoid about ... things... then grab a cup of joe and pick 4096 bits." ${r} ${c} 3 \
			"2048" "Use a 2048-bit certificate (recommended level)" ON \
			"3072" "Use a 3072-bit certificate " OFF \
			"4096" "Use a 4096-bit certificate (paranoid level)" OFF 3>&1 1>&2 2>&3)
	fi

	exitstatus=$?
	if [ $exitstatus != 0 ]; then
		echo "::: Cancel selected. Exiting..."
		exit 1
	fi

	if ([ "$pivpnENCRYPT" -ge 3072 ] && whiptail --backtitle "Setup OpenVPN" --title "Download Diffie-Hellman Parameters" --yesno --defaultno "Download Diffie-Hellman parameters from a public DH parameter generation service?\\n\\nGenerating DH parameters for a $pivpnENCRYPT-bit key can take many hours on a Raspberry Pi. You can instead download DH parameters from \"2 Ton Digital\" that are generated at regular intervals as part of a public service. Downloaded DH parameters will be randomly selected from their database.\\nMore information about this service can be found here: https://2ton.com.au/safeprimes/\\n\\nIf you're paranoid, choose 'No' and Diffie-Hellman parameters will be generated on your device." ${r} ${c}); then
		DOWNLOAD_DH_PARAM=1
	else
		DOWNLOAD_DH_PARAM=0
	fi

	echo "TWO_POINT_FOUR=${TWO_POINT_FOUR}" >> /tmp/setupVars.conf
	echo "pivpnENCRYPT=${pivpnENCRYPT}" >> /tmp/setupVars.conf
	echo "DOWNLOAD_DH_PARAM=${DOWNLOAD_DH_PARAM}" >> /tmp/setupVars.conf
}

confOpenVPN(){
	# Grab the existing Hostname
	host_name=$(hostname -s)
	# Generate a random UUID for this server so that we can use verify-x509-name later that is unique for this server installation.
	NEW_UUID=$(</proc/sys/kernel/random/uuid)
	# Create a unique server name using the host name and UUID
	SERVER_NAME="${host_name}_${NEW_UUID}"

	# Backup the openvpn folder
	OPENVPN_BACKUP="openvpn_$(date +%Y-%m-%d-%H%M%S).tar.gz"
	echo "::: Backing up the openvpn folder to /etc/${OPENVPN_BACKUP}"
	$SUDO tar czf "/etc/${OPENVPN_BACKUP}" /etc/openvpn &> /dev/null

	if [ -f /etc/openvpn/server.conf ]; then
		$SUDO rm /etc/openvpn/server.conf
	fi

	# If easy-rsa exists, remove it
	if [[ -d /etc/openvpn/easy-rsa/ ]]; then
		$SUDO rm -rf /etc/openvpn/easy-rsa/
	fi

	# Get easy-rsa
	wget -qO- "${easyrsaRel}" | $SUDO tar xz --directory /etc/openvpn
	$SUDO mv /etc/openvpn/EasyRSA-v${easyrsaVer} /etc/openvpn/easy-rsa
	# fix ownership
	$SUDO chown -R root:root /etc/openvpn/easy-rsa
	$SUDO mkdir /etc/openvpn/easy-rsa/pki
	$SUDO chmod 700 /etc/openvpn/easy-rsa/pki

	cd /etc/openvpn/easy-rsa || exit 1

	if [ "$TWO_POINT_FOUR" -eq 1 ]; then
		pivpnCERT="ec"
		pivpnTLSPROT="tls-crypt"
	else
		pivpnCERT="rsa"
		pivpnTLSPROT="tls-auth"
	fi

	# Write out new vars file
	echo "if [ -z \"\$EASYRSA_CALLER\" ]; then
	echo \"Nope.\" >&2
	return 1
fi
set_var EASYRSA            \"/etc/openvpn/easy-rsa\"
set_var EASYRSA_PKI        \"\$EASYRSA/pki\"
set_var EASYRSA_CRL_DAYS   3650
set_var EASYRSA_ALGO       ${pivpnCERT}" | $SUDO tee vars >/dev/null

	# Set certificate type
	if [ "$pivpnENCRYPT" -ge 2048 ]; then
		echo "set_var EASYRSA_KEY_SIZE   ${pivpnENCRYPT}" | $SUDO tee -a vars >/dev/null
	else
		declare -A ECDSA_MAP=(["256"]="prime256v1" ["384"]="secp384r1" ["521"]="secp521r1")
		echo "set_var EASYRSA_CURVE      ${ECDSA_MAP["${pivpnENCRYPT}"]}" | $SUDO tee -a vars >/dev/null
	fi

	# Remove any previous keys
	${SUDOE} ./easyrsa --batch init-pki

	# Build the certificate authority
	printf "::: Building CA...\\n"
	${SUDOE} ./easyrsa --batch build-ca nopass
	printf "\\n::: CA Complete.\\n"

	if [ "$pivpnCERT" = "rsa" ]; then
		if [ "${runUnattended}" = 'true' ]; then
			echo "::: The server key, Diffie-Hellman parameters, and HMAC key will now be generated."
		else
			whiptail --msgbox --backtitle "Setup OpenVPN" --title "Server Information" "The server key, Diffie-Hellman parameters, and HMAC key will now be generated." ${r} ${c}
		fi
	elif [ "$pivpnCERT" = "ec" ]; then
		if [ "${runUnattended}" = 'true' ]; then
			echo "::: The server key and HMAC key will now be generated."
		else
			whiptail --msgbox --backtitle "Setup OpenVPN" --title "Server Information" "The server key and HMAC key will now be generated." ${r} ${c}
		fi
	fi

	# Build the server
	EASYRSA_CERT_EXPIRE=3650 ${SUDOE} ./easyrsa build-server-full "${SERVER_NAME}" nopass

	if [ "$pivpnCERT" = "rsa" ]; then
		if [ ${DOWNLOAD_DH_PARAM} -eq 1 ]; then
			# Downloading parameters
			${SUDOE} curl -s "https://2ton.com.au/getprimes/random/dhparam/${pivpnENCRYPT}" -o "/etc/openvpn/easy-rsa/pki/dh${pivpnENCRYPT}.pem"
		else
			# Generate Diffie-Hellman key exchange
			${SUDOE} ./easyrsa gen-dh
			${SUDOE} mv "pki/dh.pem" "pki/dh${pivpnENCRYPT}.pem"
		fi
	fi

	# Generate static HMAC key to defend against DDoS
	${SUDOE} openvpn --genkey --secret pki/ta.key

	# Generate an empty Certificate Revocation List
	${SUDOE} ./easyrsa gen-crl
	${SUDOE} cp pki/crl.pem /etc/openvpn/crl.pem
  if ! getent passwd openvpn; then
	${SUDOE} adduser --system --home /var/lib/openvpn/ --group --disabled-login ${debianOvpnUserGroup%:*}
  fi
  ${SUDOE} chown "$debianOvpnUserGroup" /etc/openvpn/crl.pem

	# Write config file for server using the template.txt file
	$SUDO cp $pivpnFilesDir/server_config.txt /etc/openvpn/server.conf

	# Apply client DNS settings
	${SUDOE} sed -i '0,/\(dhcp-option DNS \)/ s/\(dhcp-option DNS \).*/\1'${pivpnDNS1}'\"/' /etc/openvpn/server.conf

	if [ -z ${pivpnDNS2} ]; then
		${SUDOE} sed -i '/\(dhcp-option DNS \)/{n;N;d}' /etc/openvpn/server.conf
	else
		${SUDOE} sed -i '0,/\(dhcp-option DNS \)/! s/\(dhcp-option DNS \).*/\1'${pivpnDNS2}'\"/' /etc/openvpn/server.conf
	fi

	# Set the user encryption key size
	$SUDO sed -i "s#\\(dh /etc/openvpn/easy-rsa/pki/dh\\).*#\\1${pivpnENCRYPT}.pem#" /etc/openvpn/server.conf

	if [ "$pivpnTLSPROT" = "tls-crypt" ]; then
		#If they enabled 2.4 use tls-crypt instead of tls-auth to encrypt control channel
		$SUDO sed -i "s/tls-auth \/etc\/openvpn\/easy-rsa\/pki\/ta.key 0/tls-crypt \/etc\/openvpn\/easy-rsa\/pki\/ta.key/" /etc/openvpn/server.conf
	fi

	if [ "$pivpnCERT" = "ec" ]; then
		#If they enabled 2.4 disable dh parameters and specify the matching curve from the ECDSA certificate
		$SUDO sed -i "s/\(dh \/etc\/openvpn\/easy-rsa\/pki\/dh\).*/dh none\necdh-curve ${ECDSA_MAP["${pivpnENCRYPT}"]}/" /etc/openvpn/server.conf
	elif [ "$pivpnCERT" = "rsa" ]; then
		# Otherwise set the user encryption key size
		$SUDO sed -i "s#\\(dh /etc/openvpn/easy-rsa/pki/dh\\).*#\\1${pivpnENCRYPT}.pem#" /etc/openvpn/server.conf
	fi

	# if they modified port put value in server.conf
	if [ "$pivpnPORT" != 1194 ]; then
		$SUDO sed -i "s/1194/${pivpnPORT}/g" /etc/openvpn/server.conf
	fi

	# if they modified protocol put value in server.conf
	if [ "$pivpnPROTO" != "udp" ]; then
		$SUDO sed -i "s/proto udp/proto tcp/g" /etc/openvpn/server.conf
	fi

	if [ -n "$pivpnSEARCHDOMAIN" ]; then
		$SUDO sed -i "0,/\\(.*dhcp-option.*\\)/s//push \"dhcp-option DOMAIN ${pivpnSEARCHDOMAIN}\" \\n&/" /etc/openvpn/server.conf
	fi

	# write out server certs to conf file
	$SUDO sed -i "s#\\(key /etc/openvpn/easy-rsa/pki/private/\\).*#\\1${SERVER_NAME}.key#" /etc/openvpn/server.conf
	$SUDO sed -i "s#\\(cert /etc/openvpn/easy-rsa/pki/issued/\\).*#\\1${SERVER_NAME}.crt#" /etc/openvpn/server.conf
}

confOVPN(){
	$SUDO cp $pivpnFilesDir/Default.txt /etc/openvpn/easy-rsa/pki/Default.txt

	$SUDO sed -i 's/IPv4pub/'"$pivpnHOST"'/' /etc/openvpn/easy-rsa/pki/Default.txt

	# if they modified port put value in Default.txt for clients to use
	if [ "$pivpnPORT" != 1194 ]; then
		$SUDO sed -i -e "s/1194/${pivpnPORT}/g" /etc/openvpn/easy-rsa/pki/Default.txt
	fi

	# if they modified protocol put value in Default.txt for clients to use
	if [ "$pivpnPROTO" != "udp" ]; then
		$SUDO sed -i -e "s/proto udp/proto tcp/g" /etc/openvpn/easy-rsa/pki/Default.txt
	fi

	# verify server name to strengthen security
	$SUDO sed -i "s/SRVRNAME/${SERVER_NAME}/" /etc/openvpn/easy-rsa/pki/Default.txt

	if [ "$pivpnTLSPROT" = "tls-crypt" ]; then
		#If they enabled 2.4 remove key-direction options since it's not required
		$SUDO sed -i "/key-direction 1/d" /etc/openvpn/easy-rsa/pki/Default.txt
	fi
}

confWireGuard(){
	if [ -d /etc/wireguard ]; then
		# Backup the wireguard folder
		WIREGUARD_BACKUP="wireguard_$(date +%Y-%m-%d-%H%M%S).tar.gz"
		echo "::: Backing up the wireguard folder to /etc/${WIREGUARD_BACKUP}"
		$SUDO tar czf "/etc/${WIREGUARD_BACKUP}" /etc/wireguard &> /dev/null

		if [ -f /etc/wireguard/wg0.conf ]; then
			$SUDO rm /etc/wireguard/wg0.conf
		fi
	else
		# If compiled from source, the wireguard folder is not being created
		$SUDO mkdir /etc/wireguard
	fi

	# Ensure that only root is able to enter the wireguard folder
	$SUDO chown root:root /etc/wireguard
	$SUDO chmod 700 /etc/wireguard

	if [ "${runUnattended}" = 'true' ]; then
		echo "::: The Server Keys and Pre-Shared key will now be generated."
	else
		whiptail --title "Server Information" --msgbox "The Server Keys and Pre-Shared key will now be generated." "${r}" "${c}"
	fi

	# Remove configs and keys folders to make space for a new server when using 'Repair' or 'Reconfigure'
	# over an existing installation
	$SUDO rm -rf /etc/wireguard/configs
	$SUDO rm -rf /etc/wireguard/keys

	$SUDO mkdir -p /etc/wireguard/configs
	$SUDO touch /etc/wireguard/configs/clients.txt
	$SUDO mkdir -p /etc/wireguard/keys

	# Generate private key and derive public key from it
	wg genkey | $SUDO tee /etc/wireguard/keys/server_priv &> /dev/null
	wg genpsk | $SUDO tee /etc/wireguard/keys/psk &> /dev/null
	$SUDO cat /etc/wireguard/keys/server_priv | wg pubkey | $SUDO tee /etc/wireguard/keys/server_pub &> /dev/null

	echo "::: Server Keys and Pre-Shared Key have been generated."

	echo "[Interface]
PrivateKey = $($SUDO cat /etc/wireguard/keys/server_priv)
Address = ${vpnGw}/${subnetClass}
ListenPort = ${pivpnPORT}" | $SUDO tee /etc/wireguard/wg0.conf &> /dev/null
	echo "::: Server config generated."
}

confNetwork(){
	# Enable forwarding of internet traffic
	$SUDO sed -i '/net.ipv4.ip_forward=1/s/^#//g' /etc/sysctl.conf
	$SUDO sysctl -p > /dev/null

	if [ "$USING_UFW" -eq 1 ]; then

		echo "::: Detected UFW is enabled."
		echo "::: Adding UFW rules..."
		### Basic safeguard: if file is empty, there's been something weird going on.
		### Note: no safeguard against imcomplete content as a result of previous failures.
		if test -s /etc/ufw/before.rules; then
			$SUDO cp -f /etc/ufw/before.rules /etc/ufw/before.rules.pre-pivpn
		else
			echo "$0: ERR: Sorry, won't touch empty file \"/etc/ufw/before.rules\".";
			exit 1;
		fi
		### If there is already a "*nat" section just add our POSTROUTING MASQUERADE
		if $SUDO grep -q "*nat" /etc/ufw/before.rules; then
			### Onyl add the NAT rule if it isn't already there
			if ! $SUDO grep -q "${VPN}-nat-rule" /etc/ufw/before.rules; then
				$SUDO sed "/^*nat/{n;s/\(:POSTROUTING ACCEPT .*\)/\1\n-I POSTROUTING -s ${pivpnNET}\/${subnetClass} -o ${IPv4dev} -j MASQUERADE -m comment --comment ${VPN}-nat-rule/}" -i /etc/ufw/before.rules
			fi
		else
			$SUDO sed "/delete these required/i *nat\n:POSTROUTING ACCEPT [0:0]\n-I POSTROUTING -s ${pivpnNET}\/${subnetClass} -o ${IPv4dev} -j MASQUERADE -m comment --comment ${VPN}-nat-rule\nCOMMIT\n" -i /etc/ufw/before.rules
		fi
		# Insert rules at the beginning of the chain (in case there are other rules that may drop the traffic)
		$SUDO ufw insert 1 allow "${pivpnPORT}"/"${pivpnPROTO}" >/dev/null
		$SUDO ufw route insert 1 allow in on "${pivpnDEV}" from "${pivpnNET}/${subnetClass}" out on "${IPv4dev}" to any >/dev/null

		$SUDO ufw reload >/dev/null
		echo "::: UFW configuration completed."

	elif [ "$USING_UFW" -eq 0 ]; then

		# Now some checks to detect which rules we need to add. On a newly installed system all policies
		# should be ACCEPT, so the only required rule would be the MASQUERADE one.

		if ! $SUDO iptables -t nat -S | grep -q "${VPN}-nat-rule"; then
			$SUDO iptables -t nat -I POSTROUTING -s "${pivpnNET}/${subnetClass}" -o "${IPv4dev}" -j MASQUERADE -m comment --comment "${VPN}-nat-rule"
		fi

		# Count how many rules are in the INPUT and FORWARD chain. When parsing input from
		# iptables -S, '^-P' skips the policies and 'ufw-' skips ufw chains (in case ufw was found
		# installed but not enabled).

		# Grep returns non 0 exit code where there are no matches, however that would make the script exit,
		# for this reasons we use '|| true' to force exit code 0
		INPUT_RULES_COUNT="$($SUDO iptables -S INPUT | grep -vcE '(^-P|ufw-)')"
		FORWARD_RULES_COUNT="$($SUDO iptables -S FORWARD | grep -vcE '(^-P|ufw-)')"

		INPUT_POLICY="$($SUDO iptables -S INPUT | grep '^-P' | awk '{print $3}')"
		FORWARD_POLICY="$($SUDO iptables -S FORWARD | grep '^-P' | awk '{print $3}')"

		# If rules count is not zero, we assume we need to explicitly allow traffic. Same conclusion if
		# there are no rules and the policy is not ACCEPT. Note that rules are being added to the top of the
		# chain (using -I).

		if [ "$INPUT_RULES_COUNT" -ne 0 ] || [ "$INPUT_POLICY" != "ACCEPT" ]; then
			if $SUDO iptables -S | grep -q "${VPN}-input-rule"; then
				INPUT_CHAIN_EDITED=0
			else
				$SUDO iptables -I INPUT 1 -i "${IPv4dev}" -p "${pivpnPROTO}" --dport "${pivpnPORT}" -j ACCEPT -m comment --comment "${VPN}-input-rule"
			fi
			INPUT_CHAIN_EDITED=1
		else
			INPUT_CHAIN_EDITED=0
		fi

		if [ "$FORWARD_RULES_COUNT" -ne 0 ] || [ "$FORWARD_POLICY" != "ACCEPT" ]; then
			if $SUDO iptables -S | grep -q "${VPN}-forward-rule"; then
				FORWARD_CHAIN_EDITED=0
			else
				$SUDO iptables -I FORWARD 1 -d "${pivpnNET}/${subnetClass}" -i "${IPv4dev}" -o "${pivpnDEV}" -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -m comment --comment "${VPN}-forward-rule"
				$SUDO iptables -I FORWARD 2 -s "${pivpnNET}/${subnetClass}" -i "${pivpnDEV}" -o "${IPv4dev}" -j ACCEPT -m comment --comment "${VPN}-forward-rule"
			fi
			FORWARD_CHAIN_EDITED=1
		else
			FORWARD_CHAIN_EDITED=0
		fi

		case ${PLAT} in
			Debian|Raspbian|Ubuntu)
				$SUDO iptables-save | $SUDO tee /etc/iptables/rules.v4 > /dev/null
			;;
		esac

		echo "INPUT_CHAIN_EDITED=${INPUT_CHAIN_EDITED}" >> /tmp/setupVars.conf
		echo "FORWARD_CHAIN_EDITED=${FORWARD_CHAIN_EDITED}" >> /tmp/setupVars.conf

	fi
}

confLogging() {
	echo "if \$programname == 'ovpn-server' then /var/log/openvpn.log
if \$programname == 'ovpn-server' then stop" | $SUDO tee /etc/rsyslog.d/30-openvpn.conf > /dev/null

  echo "/var/log/openvpn.log
{
	rotate 4
	weekly
	missingok
	notifempty
	compress
	delaycompress
	sharedscripts
	postrotate
		invoke-rc.d rsyslog rotate >/dev/null 2>&1 || true
	endscript
}" | $SUDO tee /etc/logrotate.d/openvpn > /dev/null

	# Restart the logging service
	case ${PLAT} in
		Debian|Raspbian|Ubuntu)
			$SUDO systemctl restart rsyslog.service || true
		;;
	esac
}


restartServices(){
	echo "::: Restarting services..."
	case ${PLAT} in
		Debian|Raspbian|Ubuntu)
			if [ "$VPN" = "openvpn" ]; then
				$SUDO systemctl enable openvpn.service &> /dev/null
				$SUDO systemctl restart openvpn.service
			elif [ "$VPN" = "wireguard" ]; then
				$SUDO systemctl enable wg-quick@wg0.service &> /dev/null
				$SUDO systemctl restart wg-quick@wg0.service
			fi
		;;
	esac

	if [ -f /etc/dnsmasq.d/02-pivpn.conf ]; then
		$SUDO pihole restartdns
	fi
}

askUnattendedUpgrades(){
	if [ "${runUnattended}" = 'true' ]; then
		if [ -z "$UNATTUPG" ]; then
			UNATTUPG=1
			echo "::: No preference regarding unattended upgrades, assuming yes"
		else
			if [ "$UNATTUPG" -eq 1 ]; then
				echo "::: Enabling unattended upgrades"
			else
				echo "::: Skipping unattended upgrades"
			fi
		fi
		echo "UNATTUPG=${UNATTUPG}" >> /tmp/setupVars.conf
		return
	fi

	whiptail --msgbox --backtitle "Security Updates" --title "Unattended Upgrades" "Since this server will have at least one port open to the internet, it is recommended you enable unattended-upgrades.\\nThis feature will check daily for security package updates only and apply them when necessary.\\nIt will NOT automatically reboot the server so to fully apply some updates you should periodically reboot." ${r} ${c}

	if (whiptail --backtitle "Security Updates" --title "Unattended Upgrades" --yesno "Do you want to enable unattended upgrades of security patches to this server?" ${r} ${c}); then
		UNATTUPG=1
	else
		UNATTUPG=0
	fi

	echo "UNATTUPG=${UNATTUPG}" >> /tmp/setupVars.conf
}

confUnattendedUpgrades(){
	local PIVPN_DEPS
	PIVPN_DEPS=(unattended-upgrades)
	installDependentPackages PIVPN_DEPS[@]
  aptConfDir="/etc/apt/apt.conf.d"

	if [ "$PLAT" = "Ubuntu" ]; then

		# Ubuntu 50unattended-upgrades should already just have security enabled
		# so we just need to configure the 10periodic file
		echo "APT::Periodic::Update-Package-Lists \"1\";
	APT::Periodic::Download-Upgradeable-Packages \"1\";
	APT::Periodic::AutocleanInterval \"5\";
	APT::Periodic::Unattended-Upgrade \"1\";" | $SUDO tee "${aptConfDir}/10periodic" > /dev/null

	else

		# Fix Raspbian config
		if [ "$PLAT" = "Raspbian" ]; then
			wget -qO- "$UNATTUPG_CONFIG" | $SUDO tar xz --directory "${aptConfDir}" "unattended-upgrades-$UNATTUPG_RELEASE/data/50unattended-upgrades.Raspbian" --strip-components 2
			if test -s "${aptConfDir}/50unattended-upgrades.Raspbian"; then
				$SUDO mv "${aptConfDir}/50unattended-upgrades.Raspbian" "${aptConfDir}/50unattended-upgrades"
			else
				echo "$0: ERR: Failed to download \"50unattended-upgrades.Raspbian\"."
				exit 1
			fi
		fi

		# Add the remaining settings for all other distributions
		echo "APT::Periodic::Enable \"1\";
	APT::Periodic::Update-Package-Lists \"1\";
	APT::Periodic::Download-Upgradeable-Packages \"1\";
	APT::Periodic::Unattended-Upgrade \"1\";
	APT::Periodic::AutocleanInterval \"7\";
	APT::Periodic::Verbose \"0\";" | $SUDO tee "${aptConfDir}/02periodic" > /dev/null

	fi

	# Enable automatic updates via the unstable repository when installing from debian package
	if [ "$VPN" = "wireguard" ] && [ "$PLAT" != "Ubuntu" ] && [ "$(uname -m)" != "armv6l" ]; then
		if ! grep -q '"o=Debian,a=unstable";' "${aptConfDir}/50unattended-upgrades"; then
			$SUDO sed -i '/Unattended-Upgrade::Origins-Pattern {/a"o=Debian,a=unstable";' "${aptConfDir}/50unattended-upgrades"
		fi
	fi
}

installScripts(){
	# Install the scripts from /etc/.pivpn to their various locations
	echo ":::"
	echo -n -e "::: Installing scripts to /opt/pivpn...\n"
	if [ ! -d /opt/pivpn ]; then
		$SUDO mkdir -p /opt/pivpn
		$SUDO chown root:root /opt/pivpn
		$SUDO chmod 0755 /opt/pivpn
	fi

	$SUDO cp "$pivpnFilesDir"/scripts/*.sh /opt/pivpn/
	$SUDO cp "$pivpnFilesDir"/scripts/"$VPN"/*.sh /opt/pivpn/
	$SUDO chmod 0755 /opt/pivpn/*.sh
	$SUDO cp "$pivpnFilesDir"/scripts/"$VPN"/pivpn /usr/local/bin/pivpn
	$SUDO chmod 0755 /usr/local/bin/pivpn
	$SUDO cp "$pivpnFilesDir"/scripts/"$VPN"/bash-completion /etc/bash_completion.d/pivpn
	$SUDO chmod 0644 /etc/bash_completion.d/pivpn
  # shellcheck disable=SC1091
	. /etc/bash_completion.d/pivpn
	echo " done."
}

displayFinalMessage(){
	if [ "${runUnattended}" = 'true' ]; then
		echo "::: Installation Complete!"
		echo "::: Now run 'pivpn add' to create the ovpn profiles."
		echo "::: Run 'pivpn help' to see what else you can do!"
		echo
		echo "::: If you run into any issue, please read all our documentation carefully."
		echo "::: All incomplete posts or bug reports will be ignored or deleted."
		echo
		echo "::: Thank you for using PiVPN."
		echo "::: It is strongly recommended you reboot after installation."
		return
	fi

	# Final completion message to user
	whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Now run 'pivpn add' to create the ovpn profiles.
Run 'pivpn help' to see what else you can do!\\n\\nIf you run into any issue, please read all our documentation carefully.
All incomplete posts or bug reports will be ignored or deleted.\\n\\nThank you for using PiVPN." ${r} ${c}
	if (whiptail --title "Reboot" --yesno --defaultno "It is strongly recommended you reboot after installation.  Would you like to reboot now?" ${r} ${c}); then
		whiptail --title "Rebooting" --msgbox "The system will now reboot." ${r} ${c}
		printf "\\nRebooting system...\\n"
		$SUDO sleep 3
		$SUDO shutdown -r now
	fi
}

main "$@"