#!/usr/bin/env bash # PiVPN: Trivial openvpn setup and configuration # Easiest setup and mangement of openvpn on Raspberry Pi # http://pivpn.io # Heavily adapted from the pi-hole.net project and... # https://github.com/StarshipEngineer/OpenVPN-Setup/ # # Install with this command (from your Pi): # # curl -L https://install.pivpn.io | bash ######## VARIABLES ######### tmpLog=/tmp/pivpn-install.log instalLogLoc=/etc/pivpn/install.log pivpnGitUrl="https://github.com/pivpn/pivpn.git" pivpnFilesDir="/etc/.pivpn" # Find the rows and columns rows=$(tput lines) columns=$(tput cols) # Divide by two so the dialogs take up half of the screen, which looks nice. r=$(( rows / 2 )) c=$(( columns / 2 )) # Find IP used to route to outside world IPv4dev=$(ip route get 8.8.8.8 | awk '{for(i=1;i<=NF;i++)if($i~/dev/)print $(i+1)}') IPv4addr=$(ip -o -f inet addr show dev "$IPv4dev" | awk '{print $4}' | awk 'END {print}') IPv4gw=$(ip route get 8.8.8.8 | awk '{print $3}') availableInterfaces=$(ip -o link | awk '{print $2}' | grep -v "lo" | cut -d':' -f1) availableUsers=$(awk -F':' '$3>=500 && $3<=60000 {print $1}' /etc/passwd) dhcpcdFile=/etc/dhcpcd.conf ######## FIRST CHECK ######## # Must be root to install echo ":::" if [[ $EUID -eq 0 ]];then echo "::: You are root." else echo "::: sudo will be used for the install." # Check if it is actually installed # If it isn't, exit because the install cannot complete if [[ $(dpkg-query -s sudo) ]];then export SUDO="sudo" export SUDOE="sudo -E" else echo "::: Please install sudo or run this as root." exit 1 fi fi # Next see if we are on a tested and supported OS function noOS_Support() { whiptail --msgbox --backtitle "INVALID OS DETECTED" --title "Invalid OS" "We have not been able to detect a supported OS. Currently this installer supports Raspbian jessie, Ubuntu 14.04 (trusty), and Ubuntu 16.04 (xenial). If you think you received this message in error, you can post an issue on the GitHub at https://github.com/pivpn/pivpn/issues." $r $c exit 1 } if hash lsb_release 2>/dev/null; then PLAT=$($LSB_REL -si) OSCN=$($LSB_REL -sc) # We want this to be trusty xenial or jessie if [[ $PLAT == "Ubuntu" || $PLAT == "Raspbian" || $PLAT == "Debian" ]]; then if [[ $OSCN != "trusty" && $OSCN != "xenial" && $OSCN != "jessie" ]]; then if (whiptail --backtitle "Not Supported OS" --title "Not Supported OS" --yesno "You are on an OS that we have not tested but MAY work. Currently this installer supports Raspbian jessie, Ubuntu 14.04 (trusty), and Ubuntu 16.04 (xenial). Would you like to continue anyway?" $r $c) then echo "::: Did not detect perfectly supported OS but," echo "::: Continuing installation at user's own risk..." else echo "::: Exiting due to unsupported OS" exit 1 fi fi else noOS_Support fi else noOS_Support fi echo "${PLAT}" > /tmp/DET_PLATFORM ####### FUNCTIONS ########## spinner() { local pid=$1 local delay=0.50 local spinstr='/-\|' while [ "$(ps a | awk '{print $1}' | grep "$pid")" ]; do local temp=${spinstr#?} printf " [%c] " "$spinstr" local spinstr=$temp${spinstr%"$temp"} sleep $delay printf "\b\b\b\b\b\b" done printf " \b\b\b\b" } welcomeDialogs() { # Display the welcome dialog whiptail --msgbox --backtitle "Welcome" --title "PiVPN Automated Installer" "This installer will transform your Raspberry Pi into an openvpn server!" $r $c # Explain the need for a static address whiptail --msgbox --backtitle "Initiating network interface" --title "Static IP Needed" "The PiVPN is a SERVER so it needs a STATIC IP ADDRESS to function properly. In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c } chooseUser() { # Explain the local user whiptail --msgbox --backtitle "Parsing User List" --title "Local Users" "Choose a local user that will hold your ovpn configurations." $r $c userArray=() firstloop=1 while read -r line do mode="OFF" if [[ $firstloop -eq 1 ]]; then firstloop=0 mode="ON" fi userArray+=("$line" "available" "$mode") done <<< "$availableUsers" # Find out how many users are available to choose from userCount=$(echo "$availableUsers" | wc -l) chooseUserCmd=(whiptail --title "Choose A User" --separate-output --radiolist "Choose:" $r $c $userCount) chooseUserOptions=$("${chooseUserCmd[@]}" "${userArray[@]}" 2>&1 >/dev/tty) if [[ $? = 0 ]]; then for desiredUser in $chooseUserOptions do pivpnUser=$desiredUser echo "::: Using User: $pivpnUser" echo "${pivpnUser}" > /tmp/pivpnUSR done else echo "::: Cancel selected, exiting...." exit 1 fi } verifyFreeDiskSpace() { # If user installs unattended-upgrades we'd need about 60MB so will check for 75MB free requiredFreeBytes=76800 existingFreeBytes=$(df -lk / 2>&1 | awk '{print $4}' | head -2 | tail -1) if ! [[ "$existingFreeBytes" =~ ^([0-9])+$ ]]; then existingFreeBytes=$(df -lk /dev 2>&1 | awk '{print $4}' | head -2 | tail -1) fi if [[ $existingFreeBytes -lt $requiredFreeBytes ]]; then whiptail --msgbox --backtitle "Insufficient Disk Space" --title "Insufficient Disk Space" "\nYour system appears to be low on disk space. PiVPN recomends a minimum of $requiredFreeBytes Bytes.\nYou only have $existingFreeBytes Free.\n\nIf this is a new install you may need to expand your disk.\n\nTry running:\n 'sudo raspi-config'\nChoose the 'expand file system option'\n\nAfter rebooting, run this installation again.\n\ncurl -L https://install.pivpn.io | bash\n" $r $c echo "$existingFreeBytes is less than $requiredFreeBytes" echo "Insufficient free space, exiting..." exit 1 fi } chooseInterface() { # Turn the available interfaces into an array so it can be used with a whiptail dialog interfacesArray=() firstloop=1 while read -r line do mode="OFF" if [[ $firstloop -eq 1 ]]; then firstloop=0 mode="ON" fi interfacesArray+=("$line" "available" "$mode") done <<< "$availableInterfaces" # Find out how many interfaces are available to choose from interfaceCount=$(echo "$availableInterfaces" | wc -l) chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" $r $c $interfaceCount) chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty) if [[ $? = 0 ]]; then for desiredInterface in $chooseInterfaceOptions do pivpnInterface=$desiredInterface echo "::: Using interface: $pivpnInterface" echo "${pivpnInterface}" > /tmp/pivpnINT done else echo "::: Cancel selected, exiting...." exit 1 fi } avoidStaticIPv4Ubuntu() { # If we are in Ubuntu then they need to have previously set their network, so just use what you have. whiptail --msgbox --backtitle "IP Information" --title "IP Information" "Since we think you are using Ubuntu, and not Raspbian, we will not configure a static IP for you If you are in Amazon then you can not configure a static IP anyway. Just ensure before this installer started you had set an elastic IP on your instance." $r $c } getStaticIPv4Settings() { # Ask if the user wants to use DHCP settings as their static IP if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address? IP address: $IPv4addr Gateway: $IPv4gw" $r $c) then # If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict. whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that. If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want. It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c # Nothing else to do since the variables are already set above else # Otherwise, we need to ask the user to input their desired settings. # Start by getting the IPv4 address (pre-filling it with info gathered from DHCP) # Start a loop to let the user enter their information with the chance to go back and edit it if necessary until [[ $ipSettingsCorrect = True ]] do # Ask for the IPv4 address IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c "$IPv4addr" 3>&1 1>&2 2>&3) if [[ $? = 0 ]];then echo "::: Your static IPv4 address: $IPv4addr" # Ask for the gateway IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c "$IPv4gw" 3>&1 1>&2 2>&3) if [[ $? = 0 ]];then echo "::: Your static IPv4 gateway: $IPv4gw" # Give the user a chance to review their settings before moving on if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct? IP address: $IPv4addr Gateway: $IPv4gw" $r $c)then # If the settings are correct, then we need to set the piVPNIP # Saving it to a temporary file us to retrieve it later when we run the gravity.sh script echo "${IPv4addr%/*}" > /tmp/pivpnIP echo "$pivpnInterface" > /tmp/pivpnINT # After that's done, the loop ends and we move on ipSettingsCorrect=True else # If the settings are wrong, the loop continues ipSettingsCorrect=False fi else # Cancelling gateway settings window ipSettingsCorrect=False echo "::: Cancel selected. Exiting..." exit 1 fi else # Cancelling IPv4 settings window ipSettingsCorrect=False echo "::: Cancel selected. Exiting..." exit 1 fi done # End the if statement for DHCP vs. static fi } setDHCPCD() { # Append these lines to dhcpcd.conf to enable a static IP echo "::: interface $pivpnInterface static ip_address=$IPv4addr static routers=$IPv4gw static domain_name_servers=$IPv4gw" | $SUDO tee -a $dhcpcdFile >/dev/null } setStaticIPv4() { # Tries to set the IPv4 address if grep -q "$IPv4addr" $dhcpcdFile; then # address already set, noop : else setDHCPCD $SUDO ip addr replace dev "$pivpnInterface" "$IPv4addr" echo ":::" echo "::: Setting IP to $IPv4addr. You may need to restart after the install is complete." echo ":::" fi } function valid_ip() { local ip=$1 local stat=1 if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then OIFS=$IFS IFS='.' ip=($ip) IFS=$OIFS [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] stat=$? fi return $stat } installScripts() { # Install the scripts from /etc/.pivpn to their various locations $SUDO echo ":::" $SUDO echo -n "::: Installing scripts to /opt/pivpn..." if [ ! -d /opt/pivpn ]; then $SUDO mkdir /opt/pivpn $SUDO chown "$pivpnUser":root /opt/pivpn $SUDO chmod u+srwx /opt/pivpn fi $SUDO cp /etc/.pivpn/scripts/makeOVPN.sh /opt/pivpn/makeOVPN.sh $SUDO cp /etc/.pivpn/scripts/listOVPN.sh /opt/pivpn/listOVPN.sh $SUDO cp /etc/.pivpn/scripts/removeOVPN.sh /opt/pivpn/removeOVPN.sh $SUDO cp /etc/.pivpn/scripts/uninstall.sh /opt/pivpn/uninstall.sh $SUDO cp /etc/.pivpn/scripts/pivpnDebug.sh /opt/pivpn/pivpnDebug.sh $SUDO chmod 0755 /opt/pivpn/{makeOVPN,listOVPN,removeOVPN,uninstall,pivpnDebug}.sh $SUDO cp /etc/.pivpn/pivpn /usr/local/bin/pivpn $SUDO chmod 0755 /usr/local/bin/pivpn $SUDO cp /etc/.pivpn/scripts/bash-completion /etc/bash_completion.d/pivpn . /etc/bash_completion.d/pivpn $SUDO echo " done." } unattendedUpgrades() { whiptail --msgbox --backtitle "Security Updates" --title "Unattended Upgrades" "Since this server will have at least one port open to the internet, it is recommended you enable unattended-upgrades.\nThis feature will check daily for security package updates only and apply them when necessary.\nIt will NOT automatically reboot the server so to fully apply some updates you should periodically reboot." $r $c if (whiptail --backtitle "Security Updates" --title "Unattended Upgrades" --yesno "Do you want to enable unattended upgrades of security patches to this server?" $r $c) then UNATTUPG="unattended-upgrades" else UNATTUPG="" fi } stopServices() { # Stop openvpn $SUDO echo ":::" $SUDO echo -n "::: Stopping openvpn service..." if [[ $PLAT == "Ubuntu" ]]; then $SUDO service openvpn stop || true else $SUDO systemctl stop openvpn.service || true fi $SUDO echo " done." } checkForDependencies() { #Running apt-get update/upgrade with minimal output can cause some issues with #requiring user input (e.g password for phpmyadmin see #218) #We'll change the logic up here, to check to see if there are any updates availible and # if so, advise the user to run apt-get update/upgrade at their own discretion #Check to see if apt-get update has already been run today # it needs to have been run at least once on new installs! timestamp=$(stat -c %Y /var/cache/apt/) timestampAsDate=$(date -d @"$timestamp" "+%b %e") today=$(date "+%b %e") if [[ $PLAT == "Ubuntu" ]]; then wget -O - https://swupdate.openvpn.net/repos/repo-public.gpg| $SUDO apt-key add - echo "deb http://swupdate.openvpn.net/apt trusty main" | $SUDO tee /etc/apt/sources.list.d/swupdate.openvpn.net.list > /dev/null fi if [ ! "$today" == "$timestampAsDate" ] || [ $PLAT = "Ubuntu" ]; then #update package lists echo ":::" echo "::: Either you are on ubuntu or" echo -n "::: apt-get update has not been run today. Running now..." $SUDO apt-get -qq update & spinner $! echo " done!" fi echo ":::" echo -n "::: Checking apt-get for upgraded packages...." updatesToInstall=$($SUDO apt-get -s -o Debug::NoLocking=true upgrade | grep -c ^Inst) echo " done!" echo ":::" if [[ $updatesToInstall -eq "0" ]]; then echo "::: Your pi is up to date! Continuing with PiVPN installation..." else echo "::: There are $updatesToInstall updates availible for your pi!" echo "::: We recommend you run 'sudo apt-get upgrade' after installing PiVPN! " echo ":::" fi echo ":::" echo "::: Checking dependencies:" dependencies=( openvpn easy-rsa git iptables-persistent dnsutils expect $UNATTUPG ) for i in "${dependencies[@]}"; do echo -n "::: Checking for $i..." if [ "$(dpkg-query -W -f='${Status}' "$i" 2>/dev/null | grep -c "ok installed")" -eq 0 ]; then echo -n " Not found! Installing...." #Supply answers to the questions so we don't prompt user if [[ $i = "iptables-persistent" ]]; then echo iptables-persistent iptables-persistent/autosave_v4 boolean true | $SUDO debconf-set-selections echo iptables-persistent iptables-persistent/autosave_v6 boolean false | $SUDO debconf-set-selections fi if [[ $i = "expect" ]] || [[ $i = "unattended-upgrades" ]]; then $SUDO apt-get -y -qq --no-install-recommends install "$i" > /dev/null & spinner $! else $SUDO apt-get -y -qq install "$i" > /dev/null & spinner $! fi echo " done!" else echo " already installed!" fi done } getGitFiles() { # Setup git repos for base files echo ":::" echo "::: Checking for existing base files..." if is_repo $pivpnFilesDir; then make_repo $pivpnFilesDir $pivpnGitUrl else update_repo $pivpnFilesDir fi } is_repo() { # If the directory does not have a .git folder it is not a repo echo -n "::: Checking $1 is a repo..." if [ -d "$1/.git" ]; then echo " OK!" return 1 fi echo " not found!!" return 0 } make_repo() { # Remove the non-repos interface and clone the interface echo -n "::: Cloning $2 into $1..." $SUDO rm -rf "$1" $SUDO git clone -q "$2" "$1" > /dev/null & spinner $! if [ -z ${TESTING+x} ]; then : else $SUDO git -C $1 checkout test fi echo " done!" } update_repo() { # Pull the latest commits echo -n "::: Updating repo in $1..." cd "$1" || exit $SUDO git pull -q > /dev/null & spinner $! if [ -z ${TESTING+x} ]; then : else ${SUDOE} git checkout test fi echo " done!" } setCustomPort() { until [[ $PORTNumCorrect = True ]] do portInvalid="Invalid" PORT=$(whiptail --title "Default OpenVPN Port" --inputbox "You can modify the default OpenVPN port. \nEnter a new value or hit 'Enter' to retain the default" $r $c 1194 3>&1 1>&2 2>&3) if [[ $? = 0 ]]; then if [[ "$PORT" =~ ^[0-9]+$ ]] && [ "$PORT" -ge 1 -a "$PORT" -le 65535 ]; then : else PORT=$portInvalid fi else echo "::: Cancel selected, exiting...." exit 1 fi if [[ $PORT == "$portInvalid" ]]; then whiptail --msgbox --backtitle "Invalid Port" --title "Invalid Port" "You entered an invalid Port number.\n Please enter a number from 1 - 65535.\n If you are not sure, please just keep the default." $r $c PORTNumCorrect=False else if (whiptail --backtitle "Specify Custom Port" --title "Confirm Custom Port Number" --yesno "Are these settings correct?\n PORT: $PORT" $r $c) then PORTNumCorrect=True else # If the settings are wrong, the loop continues PORTNumCorrect=False fi fi done } setClientDNS() { DNSChoseCmd=(whiptail --separate-output --radiolist "Select the DNS Provider for your VPN Clients. To use your own, select Custom." $r $c 5) DNSChooseOptions=(Google "" on OpenDNS "" off Level3 "" off Norton "" off Custom "" off) DNSchoices=$("${DNSChoseCmd[@]}" "${DNSChooseOptions[@]}" 2>&1 >/dev/tty) if [[ $? = 0 ]];then case $DNSchoices in Google) echo "::: Using Google DNS servers." OVPNDNS1="8.8.8.8" OVPNDNS2="8.8.4.4" # These are already in the file ;; OpenDNS) echo "::: Using OpenDNS servers." OVPNDNS1="208.67.222.222" OVPNDNS2="208.67.220.220" $SUDO sed -i '0,/\(dhcp-option DNS \)/ s/\(dhcp-option DNS \).*/\1'${OVPNDNS1}'\"/' /etc/openvpn/server.conf $SUDO sed -i '0,/\(dhcp-option DNS \)/! s/\(dhcp-option DNS \).*/\1'${OVPNDNS2}'\"/' /etc/openvpn/server.conf ;; Level3) echo "::: Using Level3 servers." OVPNDNS1="209.244.0.3" OVPNDNS2="209.244.0.4" $SUDO sed -i '0,/\(dhcp-option DNS \)/ s/\(dhcp-option DNS \).*/\1'${OVPNDNS1}'\"/' /etc/openvpn/server.conf $SUDO sed -i '0,/\(dhcp-option DNS \)/! s/\(dhcp-option DNS \).*/\1'${OVPNDNS2}'\"/' /etc/openvpn/server.conf ;; Norton) echo "::: Using Norton ConnectSafe servers." OVPNDNS1="199.85.126.10" OVPNDNS2="199.85.127.10" $SUDO sed -i '0,/\(dhcp-option DNS \)/ s/\(dhcp-option DNS \).*/\1'${OVPNDNS1}'\"/' /etc/openvpn/server.conf $SUDO sed -i '0,/\(dhcp-option DNS \)/! s/\(dhcp-option DNS \).*/\1'${OVPNDNS2}'\"/' /etc/openvpn/server.conf ;; Custom) until [[ $DNSSettingsCorrect = True ]] do strInvalid="Invalid" OVPNDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)" --inputbox "Enter your desired upstream DNS provider(s), seperated by a comma.\n\nFor example '8.8.8.8, 8.8.4.4'" $r $c "" 3>&1 1>&2 2>&3) if [[ $? = 0 ]];then OVPNDNS1=$(echo "$OVPNDNS" | sed 's/[, \t]\+/,/g' | awk -F, '{print$1}') OVPNDNS2=$(echo "$OVPNDNS" | sed 's/[, \t]\+/,/g' | awk -F, '{print$2}') if ! valid_ip "$OVPNDNS1" || [ ! "$OVPNDNS1" ]; then OVPNDNS1=$strInvalid fi if ! valid_ip "$OVPNDNS2" && [ "$OVPNDNS2" ]; then OVPNDNS2=$strInvalid fi else echo "::: Cancel selected, exiting...." exit 1 fi if [[ $OVPNDNS1 == "$strInvalid" ]] || [[ $OVPNDNS2 == "$strInvalid" ]]; then whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\n\n DNS Server 1: $OVPNDNS1\n DNS Server 2: $OVPNDNS2" $r $c if [[ $OVPNDNS1 == "$strInvalid" ]]; then OVPNDNS1="" fi if [[ $OVPNDNS2 == "$strInvalid" ]]; then OVPNDNS2="" fi DNSSettingsCorrect=False else if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\n DNS Server 1: $OVPNDNS1\n DNS Server 2: $OVPNDNS2" $r $c) then DNSSettingsCorrect=True $SUDO sed -i '0,/\(dhcp-option DNS \)/ s/\(dhcp-option DNS \).*/\1'${OVPNDNS1}'\"/' /etc/openvpn/server.conf $SUDO sed -i '0,/\(dhcp-option DNS \)/! s/\(dhcp-option DNS \).*/\1'${OVPNDNS2}'\"/' /etc/openvpn/server.conf else # If the settings are wrong, the loop continues DNSSettingsCorrect=False fi fi done ;; esac else echo "::: Cancel selected. Exiting..." exit 1 fi } confOpenVPN() { # Ask user if want to modify default port SERVER_NAME="server" # Ask user for desired level of encryption ENCRYPT=$(whiptail --backtitle "Setup OpenVPN" --title "Encryption Strength" --radiolist \ "Choose your desired level of encryption:\n This is an encryption key that will be generated on your system. The larger the key, the more time this will take. For most applications it is recommended to use 2048 bit. If you are testing or just want to get through it quicker you can use 1024. If you are paranoid about ... things... then grab a cup of joe and pick 4096." $r $c 3 \ "2048" "Use 2048-bit encryption. Recommended level." ON \ "1024" "Use 1024-bit encryption. Test level." OFF \ "4096" "Use 4096-bit encryption. Paranoid level." OFF 3>&1 1>&2 2>&3) exitstatus=$? if [ $exitstatus != 0 ]; then echo "::: Cancel selected. Exiting..." exit 1 fi # Copy the easy-rsa files to a directory inside the new openvpn directory $SUDO cp -r /usr/share/easy-rsa /etc/openvpn # Edit the EASY_RSA variable in the vars file to point to the new easy-rsa directory, # And set the chosen key size cd /etc/openvpn/easy-rsa $SUDO sed -i 's:"`pwd`":"/etc/openvpn/easy-rsa":' vars $SUDO sed -i "s/\(KEY_SIZE=\).*/\1${ENCRYPT}/" vars # Init Cert Values COUNTRY="US" STATE="CA" CITY="SanFrancisco" ORG="Fort-Funston" SERVER_NAME="server" KEY_NAME="EasyRSA" EMAIL="me@myhost.mydomain" whiptail --title "Certificate Information" --msgbox "You will now be shown the default values for fields that will be used in the certificate. \nIt is fine to leave these as-is since only you and the clients you create will ever see this. \nHowever, if you want to change the values, simply select the ones you wish to modify." $r $c until [[ $CERTVALCorrect = True ]] do CERTVAL=$(whiptail --title "Certificate Information" --checklist "Choose any certificate values you want to change" $r $c 7 \ "COUNTRY" "= US" OFF \ "STATE" "= CA" OFF \ "CITY" "= SanFranciso" OFF \ "ORG" "= Fort-Funston" OFF \ "SERVER_NAME" "= server" OFF \ "KEY_NAME" "= EasyRSA" OFF \ "EMAIL" "= me@myhost.mydomain" OFF 3>&1 1>&2 2>&3) exitstatus=$? if [ $exitstatus != 0 ]; then echo "::: Cancel selected. Exiting..." exit 1 fi for i in $CERTVAL do if [ $i == '"COUNTRY"' ]; then COUNTRY=$(whiptail --title "Certificate Country" --inputbox \ "Enter a 2 letter abbreviation for Country" $r $c US 3>&1 1>&2 2>&3) $SUDO sed -i "s/\(KEY_COUNTRY=\"\).*/\1${COUNTRY}\"/" vars fi if [ $i == '"STATE"' ]; then STATE=$(whiptail --title "Certificate State" --inputbox \ "Enter a 2 letter abbreviated State or Province" $r $c CA 3>&1 1>&2 2>&3) $SUDO sed -i "s/\(KEY_PROVINCE=\"\).*/\1${STATE}\"/" vars fi if [ $i == '"CITY"' ]; then CITY=$(whiptail --title "Certificate City" --inputbox \ "Enter a City name" $r $c SanFrancisco 3>&1 1>&2 2>&3) $SUDO sed -i "s/\(KEY_CITY=\"\).*/\1${CITY}\"/" vars fi if [ $i == '"ORG"' ]; then ORG=$(whiptail --title "Certificate Org" --inputbox \ "Enter an Organization name" $r $c Fort-Funston 3>&1 1>&2 2>&3) $SUDO sed -i "s/\(KEY_ORG=\"\).*/\1${ORG}\"/" vars fi if [ $i == '"EMAIL"' ]; then EMAIL=$(whiptail --title "Certificate Email" --inputbox \ "Enter an Email Address" $r $c "me@myhost.mydomain" 3>&1 1>&2 2>&3) $SUDO sed -i "s/\(KEY_EMAIL=\"\).*/\1${EMAIL}\"/" vars fi if [ $i == '"SERVER_NAME"' ]; then SERVER_NAME=$(whiptail --title "Server Name" --inputbox \ "Enter a Server Name" $r $c "pivpn" 3>&1 1>&2 2>&3) # This began a rabbit hole of errors. Nope. #sed -i '/export KEY_CN/s/^#//g' vars #sed -i "s/\(KEY_CN=\"\).*/\1${SERVER_NAME}\"/" vars fi if [ $i == '"KEY_NAME"' ]; then KEY_NAME=$(whiptail --title "Key Name" --inputbox \ "Enter a Key Name" $r $c "EasyRSA" 3>&1 1>&2 2>&3) $SUDO sed -i "s/\(KEY_NAME=\"\).*/\1${KEY_NAME}\"/" vars fi done if (whiptail --backtitle "Confirm Certificate Fields" --title "Confirm Certificate Fields" --yesno "Are these values correct?\n\n Country: $COUNTRY\n State: $STATE\n City: $CITY\n Org: $ORG\n Email: $EMAIL\n Server Name: $SERVER_NAME\n Key Name: $KEY_NAME" $r $c) then CERTVALCorrect=True else CERTVALCorrect=False fi done # Make PiVPN the OU KEY_OU=PiVPN $SUDO sed -i "s/\(KEY_OU=\"\).*/\1${KEY_OU}\"/" vars # It seems you have to set this if you mess with key_cn, lets not. # grep -q 'KEY_ALTNAMES=' vars || printf '\nexport KEY_ALTNAMES="PiVPN_KEYALT"\n' >> vars # source the vars file just edited source ./vars # Remove any previous keys ${SUDOE} ./clean-all # Build the certificate authority echo "::: Building CA..." ${SUDOE} ./build-ca < /etc/.pivpn/ca_info.txt printf "\n::: CA Complete.\n" whiptail --msgbox --backtitle "Setup OpenVPN" --title "Server Information" "The server key, Diffie-Hellman key, and HMAC key will now be generated." $r $c # Build the server ${SUDOE} ./build-key-server --batch $SERVER_NAME # Generate Diffie-Hellman key exchange ${SUDOE} ./build-dh # Generate static HMAC key to defend against DDoS ${SUDOE} openvpn --genkey --secret keys/ta.key # Write config file for server using the template .txt file LOCALIP=$(ifconfig $pivpnInterface | grep -Eo 'inet (addr:)?([0-9]*\.){3}[0-9]*' | grep -Eo '([0-9]*\.){3}[0-9]*') $SUDO cp /etc/.pivpn/server_config.txt /etc/openvpn/server.conf $SUDO sed -i "s/LOCALIP/${LOCALIP}/g" /etc/openvpn/server.conf # Set the user encryption key size $SUDO sed -i "s/\(dh \/etc\/openvpn\/easy-rsa\/keys\/dh\).*/\1${ENCRYPT}.pem/" /etc/openvpn/server.conf # if they modified port put value in server.conf if [ $PORT != 1194 ]; then $SUDO sed -i "s/1194/${PORT}/g" /etc/openvpn/server.conf fi # write out server certs to conf file $SUDO sed -i "s/\(key \/etc\/openvpn\/easy-rsa\/keys\/\).*/\1${SERVER_NAME}.key/" /etc/openvpn/server.conf $SUDO sed -i "s/\(cert \/etc\/openvpn\/easy-rsa\/keys\/\).*/\1${SERVER_NAME}.crt/" /etc/openvpn/server.conf } confUnattendedUpgrades() { if [[ $UNATTUPG == "unattended-upgrades" ]]; then if [[ $PLAT == "Ubuntu" ]]; then # Ubuntu 50unattended-upgrades should already just have security enabled # so we just need to configure the 10periodic file cat << EOT | $SUDO tee /etc/apt/apt.conf.d/10periodic >/dev/null APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Download-Upgradeable-Packages "1"; APT::Periodic::AutocleanInterval "5"; APT::Periodic::Unattended-Upgrade "1"; EOT else $SUDO sed -i '/\(o=Raspbian,n=jessie\)/c\"o=Raspbian,n=jessie,l=Raspbian-Security";\' /etc/apt/apt.conf.d/50unattended-upgrades cat << EOT | $SUDO tee /etc/apt/apt.conf.d/02periodic >/dev/null APT::Periodic::Enable "1"; APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Download-Upgradeable-Packages "1"; APT::Periodic::Unattended-Upgrade "1"; APT::Periodic::AutocleanInterval "7"; APT::Periodic::Verbose "0"; EOT fi fi } confNetwork() { # Enable forwarding of internet traffic $SUDO sed -i '/net.ipv4.ip_forward=1/s/^#//g' /etc/sysctl.conf $SUDO sysctl -p # if ufw enabled, configure that if hash ufw 2>/dev/null; then $SUDO ufw status | grep inactive &>/dev/null if [[ $? -eq 0 ]]; then noUFW=1 else echo "::: Detected UFW is enabled." echo "::: Adding UFW rules..." $SUDO cp /etc/.pivpn/ufw_add.txt /tmp/ufw_add.txt $SUDO sed -i 's/IPv4dev/'$IPv4dev'/' /tmp/ufw_add.txt $SUDO sed -i "s/\(DEFAULT_FORWARD_POLICY=\).*/\1\"ACCEPT\"/" /etc/default/ufw $SUDO sed -i -e '/delete these required/r /tmp/ufw_add.txt' -e//N /etc/ufw/before.rules $SUDO ufw disable $SUDO ufw enable echo "::: UFW configuration completed." fi else noUFW=1 fi # else configure iptables if [[ $noUFW -eq 1 ]]; then $SUDO iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o $IPv4dev -j MASQUERADE if [[ $PLAT == "Ubuntu" ]]; then $SUDO iptables-save else $SUDO netfilter-persistent save fi fi } confOVPN() { IPv4pub=$(dig +short myip.opendns.com @resolver1.opendns.com) $SUDO cp /tmp/pivpnUSR /etc/pivpn/INSTALL_USER $SUDO cp /tmp/DET_PLATFORM /etc/pivpn/DET_PLATFORM # Set status that no certs have been revoked echo 0 > /tmp/REVOKE_STATUS $SUDO cp /tmp/REVOKE_STATUS /etc/pivpn/REVOKE_STATUS METH=$(whiptail --title "Public IP or DNS" --radiolist "Will clients use a Public IP or DNS Name to connect to your server?" $r $c 2 \ "$IPv4pub" "Use this public IP" "ON" \ "DNS Entry" "Use a public DNS" "OFF" 3>&1 1>&2 2>&3) exitstatus=$? if [ $exitstatus != 0 ]; then echo "::: Cancel selected. Exiting..." exit 1 fi $SUDO cp /etc/.pivpn/Default.txt /etc/openvpn/easy-rsa/keys/Default.txt if [ "$METH" == "$IPv4pub" ]; then $SUDO sed -i 's/IPv4pub/'$IPv4pub'/' /etc/openvpn/easy-rsa/keys/Default.txt else until [[ $publicDNSCorrect = True ]] do PUBLICDNS=$(whiptail --title "PiVPN Setup" --inputbox "What is the public DNS name of this Server?" $r $c 3>&1 1>&2 2>&3) exitstatus=$? if [ $exitstatus != 0 ]; then echo "::: Cancel selected. Exiting..." exit 1 fi if (whiptail --backtitle "Confirm DNS Name" --title "Confirm DNS Name" --yesno "Is this correct?\n\n Public DNS Name: $PUBLICDNS" $r $c) then publicDNSCorrect=True $SUDO sed -i 's/IPv4pub/'$PUBLICDNS'/' /etc/openvpn/easy-rsa/keys/Default.txt else publicDNSCorrect=False fi done fi # if they modified port put value in Default.txt for clients to use if [ $PORT != 1194 ]; then $SUDO sed -i -e "s/1194/${PORT}/g" /etc/openvpn/easy-rsa/keys/Default.txt fi # verify server name to strengthen security $SUDO sed -i "s/SRVRNAME/${SERVER_NAME}/" /etc/openvpn/easy-rsa/keys/Default.txt $SUDO mkdir /home/$pivpnUser/ovpns $SUDO chmod 0777 -R /home/$pivpnUser/ovpns } installPiVPN() { checkForDependencies stopServices confUnattendedUpgrades $SUDO mkdir -p /etc/pivpn/ getGitFiles installScripts setCustomPort confOpenVPN confNetwork confOVPN setClientDNS } displayFinalMessage() { # Final completion message to user if [[ $PLAT == "Ubuntu" ]]; then $SUDO service openvpn start else $SUDO systemctl enable openvpn.service $SUDO systemctl start openvpn.service fi whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Now run 'pivpn add' to create the ovpn profiles. Run 'pivpn help' to see what else you can do! The install log is in /etc/pivpn." $r $c if (whiptail --title "Reboot" --yesno --defaultno "It is strongly recommended you reboot after installation. Would you like to reboot now?" $r $c); then whiptail --title "Rebooting" --msgbox "The system will now reboot." $r $c printf "\nRebooting system...\n" $SUDO sleep 3 $SUDO shutdown -r now fi } ######## SCRIPT ############ # Start the installer welcomeDialogs # Verify there is enough disk space for the install verifyFreeDiskSpace # Find interfaces and let the user choose one chooseInterface if [[ $PLAT == "Ubuntu" ]]; then avoidStaticIPv4Ubuntu else getStaticIPv4Settings setStaticIPv4 fi # Choose the user for the ovpns chooseUser # Ask if unattended-upgrades will be enabled unattendedUpgrades # Install and log everything to a file installPiVPN # Move the log file into /etc/pivpn for storage #$SUDO mv $tmpLog $installLogLoc displayFinalMessage echo "::: Install Complete..."